The implementation of processes that use renewable energy requires that a techno-economic analysis be performed beforehand to determine its economic and technical feasibility. A techno-economic analysis was performed proposed wind farms in Trinidad and Tobago using the System Advisor Model simulation software. Metrics included the annual energy production in kWh, capacity factor, net present value in US$ and internal rate of return. From the above, the number of households that can be powered each month by the farms were calculated. The results showed that rotor diameter, which defines the swept area has a significant impact on annual energy production as a 33 m difference translated into a 27.3 GWh and 22.9 GWh difference in output. The results are promising and show that the oil and natural gas-based economy can be diversified.

The electrification of regional aviation requires coordinated planning of airport energy systems that integrate renewable generation, energy storage, and hydrogen technologies in a cost-efficient and resilient manner. This paper presents a scalable techno-economic optimization framework that models multiple airports as collaborative energy hubs. An object-oriented mixed-integer linear programming (MILP) formulation is combined with a genetic algorithm (GA) to optimize infrastructure sizing and energy dispatch. The framework is applied to three Swedish regional airports-Västerås, Jönköping, and Visby. A set of scenarios, including parties operating under shared wind-energy contracts using power purchase agreements (PPAs) and dynamic pricing (DP), was studied. Detailed representations of battery energy storage, hydrogen production and storage, and market interactions are included. Results show that coordinated operation and airport collaboration under a smart energy management system can... [more]

Decarbonizing ammonia by replacing grey with green hydrogen directly affects the operation of the Haber-Bosch (HB) process. When directly coupled to green hydrogen production from renewable energy, the HB process should be able operate flexibly to match variable hydrogen supply. This study presents a structured approach for designing a load-flexible HB plant, supported by a rigorous process model. First, we screen 2, 000 designs at high (100%) and low (10%) hydrogen loads to assess operability. Only 1, 100 designs are feasible for both loads, underscoring the need to account for multivariable interactions during design. Next, we assess the economic feasibility of a base design, comparing HB operation under constant and flexible loads. Flexible operation reduces the levelized cost of ammonia (LCOA) by about 5.8%, primarily by lowering green hydrogen production costs. This cost reduction results from downregulating hydrogen production during periods of high electricity prices. By contras... [more]

Low-temperature industrial processes release substantial amounts of waste heat, representing a largely untapped renewable energy resource. This study focuses on the brewery sector, encompassing both beer and whiskey production, along with its integration with manufacturing and city. The brewery industry generates approximately 0.061 kWh of waste heat per liter of beer, while whiskey production releases around 2.2 kWh per liter, with most of this waste heat available at temperatures close to 95 °C. Such low-grade heat is well suited to meet heating demands in manufacturing industries and urban district heating networks, where temperature requirements typically remain below 80 °C. Multiple technological options for meeting process heat requirements and recovering waste heat are evaluated using the OSMOSE energy integration framework. The study assesses the technical performance and economic viability of these options under varying assumptions for electricity prices, natural gas prices, a... [more]

The decarbonization of pharmaceutical manufacturing is critical for achieving the industry's net-zero targets, and electrochemistry is emerging as a promising green technology that could play a key role in this transition. This work evaluates a continuous-flow electrochemical route for ibuprofen synthesis through electrochemical carboxylation of 1-chloro-(4-isobutylphenyl) ethane as a low-carbon alternative that can be directly coupled with renewable electricity. Experimental studies have demonstrated the selective formation of ibuprofen using a silver cathode in the ionic liquid N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13 TFSI). While the reaction mechanism is based on laboratory-scale, batch experiments, this study develops a conceptual design and scale-up methodology for the continuous route to provide an evaluation of the industrial feasibility of this electrochemical pathway through a rigorous plant-wide simulation in AVEVA® Process Simulation. Global se... [more]

Decarbonization of hydrogen-intensive industrial clusters is essential to meet the European Union's net-zero targets. Although hydrogen can replace fossil-based feedstocks and fuels in refineries and chemical industries, its production remains largely dependent on natural gas. Therefore, cost-effective and low-emission supply routes require a system-level approach that integrates regional resources, technologies, and industrial demand. This study applies a multi-objective optimization framework to design a low-carbon hydrogen supply system for Galicia (northwestern Spain), addressing two gaps in regional energy system modeling: model transferability across regions and integration of social criteria beyond techno-economic assessment. The model quantifies trade-offs between total system cost and greenhouse gas emissions, and an employment indicator is integrated via post-processing using TOPSIS. The results show that meeting 100% of the projected 2030 demand (105 kt H2/a) yields a single... [more]

European industry accounts for approximately 20% of total European CO2 emissions, with heat demand representing one of the largest energy consumers. Solar thermal collectors offer an efficient renewable alternative to fossil fuels to cover the heat demand. However, due to the temporal mismatch between the solar thermal generation and process heat generation a thermal storage is needed to maximize the renewable utilization. This article presents a novel optimization framework for integrating an ideal heat storage with solar thermal systems in multiperiod heat exchanger network synthesis. We derive an analytical approach to optimize the heat storage by using physical insights from Pinch Analysis: heat can only charge the storage below the lowest pinch point in a given period and discharge above the highest pinch point. We show both how to do it for a storage of infinite size and of finite size, and that the infinite size storage is much more efficient to solve. The approach is validated... [more]

The reduction of CO2-emissions in the chemical industry is essential to meet European climate targets. Particularly, the reliance on fossil fuels for process heat supply is a key factor for CO2-emissions. Electrically driven compression heat pumps are a promising option to reduce fossil fuel consumption by upgrading low-temperature waste heat to a higher temperature level, provided that low-carbon electricity is available. However, the integration of heat pumps into chemical utility systems remains a challenge due to economic constraints and the high complexity associated with site-wide heat integration and retrofit of existing structures. This work presents a mixed-integer linear programming (MILP) approach for the optimization of utility systems with integrated heat pumps. To address computational complexity, candidate utility temperature levels are pre-selected, and feasible heat pump coefficients of performance (COP) are precomputed. The framework is applied to both greenfield and... [more]

Behind-the-meter generation from variable renewable energy is a potential pathway for new data centers to obtain power more quickly and more sustainably than interconnecting to existing electrical grids. Energy storage is needed to accommodate the variability of wind and solar energy across multiple timescales. Hydrogen from electrolysis and ammonia made from this hydrogen can be used as fuel for dispatchable power generation while offering lower $/MWh storage costs than batteries. In this work, we analyze the economics of using hydrogen, and/or ammonia along with batteries in hybrid energy storage systems to enable data centers to be powered by 100% renewables. We perform this analysis using an optimization model for the selection, sizing, and coordinated hourly operation of constituent energy storage technologies toward minimizing the levelized cost of energy (LCOE). The model uses an hourly resolution scheduling horizon of five years to account for hourly, seasonal, and interannual... [more]

Green hydrogen constitutes a strategic energy vector for achieving the Sustainable Development Goals (SDGs 7, 9, 12, and 13) due to its high energy density, flexibility for renewable energy storage, and direct emission-free operation. However, its production critically depends on the supply of high-purity water, which is unsustainable in the context of a projected 40% global water deficit by 2030. Given that more than 97% of available water is saline, integrating desalination processes with electrolysis constitutes an essential strategy for transitioning toward circular economy models in water resource management. This work presents the conceptual design, detailed modeling, and optimization of an integrated process for the sustainable production of green hydrogen from saline water. The system couples a desalination technology (Solar Distillation) with two electrolysis technologies (AEL and SOEC), modeled through physicochemical, electrochemical, and thermodynamic principles. The object... [more]

Existing gas network infrastructure are important national energy assets, transporting mostly fossil-derived natural gas to end-users. Biomethane, methane derived from anaerobic digestion (AD) of organic matter, presents a potential route to replace fossil fuels with home-grown renewable gas. Combined with carbon capture and storage (CCS) of the CO2 in the biogas potentially results in carbon negative energy. This work seeks to understand the feasibility of operating a part of the gas network isolated from the main natural gas network fully on biomethane in Scotland. We present an integrated techno-economic optimisation framework for designing self-sufficient biomethane islands, applied to the Inverness network. The model, implemented as a nonlinear program (NLP), maximises annual net profit from biomethane sales and Green Gas Support Scheme (GGSS) tariffs subject to practical constraints such as GGSS-compliance of =50 % waste-derived biomethane, seasonal supply, land/scale, demand bal... [more]

While the transition from traditional energy sources to renewable energy is necessary to reduce greenhouse gas (GHG) emissions, it introduces new challenges related to material use, both in quantity and type, potentially leading to resource scarcity, biodiversity loss, and waste accumulation. Therefore, incorporating circular economy (CE) principles into the design and planning of energy systems becomes essential. Despite the growing recognition of circularity, current assessments in energy systems focus on economic performance and GHG emissions. In this work, we propose a metric for quantifying circularity of energy systems based on the CE assessment framework MICRON, addressing the gap between CE metrics and energy systems planning. The framework is adapted to energy systems by accounting for the specific characteristics of energy technologies and by incorporating metrics associated with critical material use, scarcity, and durability. Its applicability is demonstrated through a case... [more]

This document provides supplementary material supporting the Conference Paper “A Multi-Objective Optimisation and Superstructure-Based Decision-Support Tool for Regional Low-Carbon Hydrogen Roadmaps: Methodology and Application to a region of Spain”.

It includes additional methodological details, input data, model assumptions, and extended results that complement the analyses presented in the main manuscript.

This document contains digital supplementary material (detailed model description, parameters for different case studies and additional figures) related to the article "Optimization of Site-wide Heat-Integrated Utility Systems with Heat Pumps using MILP" which is submitted to the peer reviewed conference proceeding of the 36th European Symposium on Computer Aided Process Engineering (ESCAPE 36).

Nitrogen-based fertilisers are pivotal for global food security, yet their production is a notable source of greenhouse gas emissions. Urea, a vital fertiliser with significant market presence—19% in Europe and 33% globally—is produced through an energy-demanding process reliant on fossil fuels. This study introduces a ’Green’ Urea plant concept, aimed for implementation in Ravenna, Italy, harnessing exclusively renewable energy sources to foster agricultural sustainability. With a production capacity of 1,300 tonnes per day, this facility neighbours Italy’s first carbon capture and storage (CCS) facility at Ravenna. The core of the proposed methodology is the synthesis of green ammonia. Seawater Reverse Osmosis-Polymer Electrolyte Membrane Electrolysis (SWRO-PEM) and Pressure Swing Adsorption (PSA) yield the necessary hydrogen and nitrogen feedstocks. An enhanced Haber-Bosch process utilising a Ru-based catalyst, facilitating lower operational conditions (500◦C and 100 bar) for the af... [more]

Nowadays, it is crucial to change daily habits to live in a more sustainable world. From an industrial point of view, the capture of CO2 is becoming more and more important in the chemical industry to reduce greenhouse gas emissions and its reuse can be an alternative to fossil resources. Another major challenge for future engineers is the significant increase in the use of renewable energy sources. In this perspective, a process allowing the synthesis of three different olefins from CO2 captured in industrial flue gases and using only wind energy is established. This process is separated into three major sections: water electrolysis, carbon dioxide reduction to produce methanol and methanol-to-olefins synthesis. The targeted production capacity is of 450 000 tonnes per year of olefins, which are considered to be ethylene, propylene and butylene. This process, which involves a complete flowsheet modelling is implemented with the Aspen Plus software. A heat integration is performed to i... [more]

Sugarcane bioenergy is a reality in Brazil, comprising the production of ethanol and bioelectricity. Sugarcane bioenergy can reduce greenhouse gas (GHG) emissions as compared to fossil fuels. However, there are concerns about the possible implications caused by the expansion of sugarcane production, the displacement of mainly pastureland, but also other croplands, and the potential for indirect land use changes. A promising strategy to enlarge sugarcane bioenergy in Brazil without compromising the cattle industry is to integrate both activities, converting extensive livestock production systems into more intensive ones. The objective of this study is to model and evaluate the socioeconomic impacts and land use change considering the expansion of ethanol production in two scenarios. The first scenario, referred to Business as Usual (BAU), comprises of sugarcane bioenergy and extensive livestock production, without any integration between the two. The second scenario, Integrated Sugarcan... [more]

In 2022, Uruguay launched its green hydrogen roadmap, due to its renewable energy potential, water availability, and favorable logistics to position itself as an exporter of green hydrogen and derivatives. The energy source for water electrolysis is a key factor in both the final cost and the environmental impact of hydrogen production. In this context, this study evaluates the environmental impact of hydrogen production via water electrolysis, powered by 150 MW of new power sources (solar, wind, and hybrid farms) in Uruguay, all connected to the national grid. A life cycle assessment (LCA) was conducted using OpenLCA software and the Ecoinvent database, with 1 kg of hydrogen as the functional unit and the system boundaries included power generation and the electrolysis system. The analysis focused on global warming potential (GWP), considering different scenarios for the grid energy mix and the inclusion or exclusion of surplus energy as carbon credits. The wind plant is the option th... [more]

Industries with low-temperature heat demand, such as laundry and syrup sectors, heavily rely on natural gas-fired boilers, posing challenges to achieving net-zero emissions by 2050. Like hard-to-abate sectors, they must explore energy transition strategies, including heat recovery, fuel substitution, or carbon capture, to reduce CO2 emissions. This paper evaluates the potential of energy transition in these sectors through case studies, using a mixed integer linear programming (MILP) approach. The analysis focuses on three key performance indicators (KPIs): specific energy consumption, CO2 reduction, and variable costs. By 2050, the adoption of heat pumps and waste valorization emerge as the most promising solutions for the syrup and laundry sectors. Specifically, the use of heat pumps reduces energy demand by at least 50%, while on-site biofuel production can fully replace natural gas consumption, thus eliminating dependency on external energy sources. The analysis highlights the impo... [more]

One of the proposed strategies to reach net-zero goals is the diversification of a country’s energy mix and transition to technologies that favour the mitigation of greenhouse gas emissions, while decreasing dependency on conventional fuels. This work presents a mathematical model that describes key production routes for two proposed energy transition vectors, biomethane and hydrogen, expressed as a Mixed-Integer Linear Problem (MILP). The supply chain is optimized with the objective of maximizing the profits from the global supply chain. The problem is formulated as an allocation problem, with production distributed between biomethane and hydrogen markets. The case study focuses on a region in Mexico where second-generation biomass for biogas production is abundant, while hydrogen is produced from biomethane using steam methane reforming. The results highlight the importance of balancing resource allocation in shared supply chains. With a production ratio of 60% biomethane and 40% hyd... [more]

Heat pumps play a crucial role in decarbonizing the chemical industry. The integration and sizing of heat pumps in chemical processes is a challenging task in multi-product chemical processes due to the fluctuating waste heat supply and heat demand. Integrating heat pumps may require a retrofit of the utility system. Mathematical optimization is a useful tool to tackle this challenge by enabling the analysis of correlation between relevant system parameters and equipment sizing. This study demonstrates the utilization of mathematical optimization and parameter studies for utility system equipment sizing addressing fluctuating heat supply and demand profiles.

Reduction of greenhouse gas emissions is an important environmental element to actively combat the global warming and climate change. In view of reducing the CO2 concentration from the atmosphere, the Direct Air Capture (DAC) options are promising technologies in delivering negative carbon emissions. The integration of renewable-powered DAC systems with the CO2 utilization technologies can deliver both negative carbon emissions as well as reduced energy and economic penalties of overall decarbonized processes. This work evaluates the innovative energy- and cost-efficient potassium - calcium looping cycle as promising direct air capture technology integrated with various CO2 catalytic transformations into basic chemicals / energy carriers (e.g., synthetic natural gas, methanol etc.). The integrated system will be powered by renewable energy (in terms of both heat and electricity requirements). The investigated DAC concept is set to capture 1 Mt/y CO2 with about 75 % carbon capture rate.... [more]

In this work, we propose a mixed-integer linear programming (MILP) model that optimizes economic and environmental objectives by retrofitting fuel stations for the case study of Spain. The model contains set-covering constraints that ensure that there is at least one retrofitted fuel station within a radius of 20 kilometers of each retrofitted fuel station. The results indicate that by retrofitting fuel stations to allow for electric vehicles, both economic and environmental objectives improve, while showing which power plants would be tasked with the increase in electricity production to satisfy the increased electric demand.

The electrification of industrial heat is a promising pathway for decarbonization, yet challenges persist in balancing capital costs, operating costs, and emissions reduction. While previous studies have assessed electrification through heat integration and graphical methods, these approaches do not inherently determine the optimal hybrid technology configuration. This study introduces an optimization-based framework that systematically evaluates the cost-optimal allocation of electrified and conventional heating technologies. Formulated as a Mixed-Integer Linear Programming (MILP) model and implemented in Gurobi, the framework minimizes Total Annualized Cost (TAC) while satisfying heat demand, technology constraints, and emissions targets. Applied to an industrial case study, the model compares three scenarios: a fully conventional system relying on steam boilers and fired heaters, a fully electrified system utilizing high-temperature heat pumps, electrode boilers, and electric heater... [more]

This work addresses the process design of Power-to-Ammonia plants (i.e. ammonia from renewable-powered electrolysis) by a novel methodology based on the multi-objective optimization of the “Three pillars of sustainability”: economic, environmental, and social. Specifically, we developed a tool estimating the installed capacities of every main process section typically featured by Power-to-Ammonia facilities (e.g., the renewable power plant, the electrolyzer, energy and hydrogen storage systems, etc.) to maximize the plant’s “Global Sustainability Score”.