During the drilling of ultra-deep wells, gas kick often occurs, influenced by the complex void pressure profile. The accurate description of particle settling behavior in the gas−liquid mixture is of great significance to effectively deal with gas kicks and ensure drilling safety. In this study, the gas−liquid two-phase annulus flow with different gas volume fractions is created through the transparent annular pipe, constant pressure air pump, and gas flowmeter. High-speed photography is used to record and analyze the sedimentation of particles in gas−liquid mixtures. This study is based on 288 tests. The main parameters in this experiment include the particle Reynolds number, the gas fraction, and liquid viscosity. The effects of wall and gas fraction on the drag coefficient were analyzed. The correlation of particle terminal settling velocity was established. The results obtained show a correlation with average absolute errors (AAE) of 10.7%. This study reveals the settling character... [more]

The main objective of this research is to expand right coprime factorization based on operator theory in nonlinear systems. A novel method for right coprime factorization is proposed by introducing an operator that can deform the system’s response into an arbitrary shape. This enables the design of control systems that are highly effective against noise. As an application, we use a pneumatic stage. The effectiveness of this method is verified through simulations and real-world experiments.

Global population growth, industrialization, and urbanization have led to a dramatic increase in solid waste (SW) generation, which is considered a main environmental pollutant via greenhouse gas (GHG) emissions and soil and groundwater contamination. This creates serious problems for the region and the world at large. Currently, about 2 billion tons of SW are generated globally every year, of which 67% is processed by various treatment technologies, while 33% is freely released into the environment. Therefore, there is an urgent need to significantly reduce GHG emissions from global SW production for the maximization of climate benefits and to halt the continued rise in temperature. Fortunately, this can be attained with the use of existing SW processing methods and improved performance. Through a comprehensive literature review, this research evaluates the effectiveness of various SW approaches, including source reduction, recycling, and energy recovery. Additionally, this study exam... [more]

Vanillin (4-hydroxy-3-methoxybenzaldehyde) is the main component of natural vanilla and a relevant substance in the flavoring and aromatic industries. This study presents a kinetic model to explain both vanillin and vanillic acid concentrations achieved in the alkaline oxidation of pine kraft lignin. Considering that they come from the same precursors, this approach allows an understanding of vanillin production with reaction conditions that minimize the vanillic acid pathway directly from the lignin oligomers, thus maximizing vanillin production. This study involves the effects of oxygen partial pressure, temperature, and the presence or absence of a catalyst (CuSO4 and Fe2(SO4)3 mixture) on the vanillin and vanillic acid yields. An adapted reactor (M/K Systems Inc., Williamstown, MA, USA) with a recirculation and spray liquids system was used in the experiments. The experiments were performed using one liter of a solution of NaOH 2 M and 60 g of lignin. During the lignin oxidation re... [more]

During the last few decades, water pollution has become a growing concern at international level. To date, only a few Candida parapsilosis strains were successfully used in environmental remediation. In the present article, the strain C. parapsilosis CMGB-YT was studied for its ability to assimilate hydrophobic substrates and to produce biosurfactants with antimicrobial activity and positive effects on heavy metal removal from contaminated wastewaters. The strain C. parapsilosis CMGB-YT was grown on yeast peptone (YP) media with 1% n-decane, n-dodecane, n-tetradecane, n-hexadecane, as well as commercial sunflower and olive oils. The production of the biosurfactant was evaluated using the emulsification index (E24%). The surface properties and emulsifying stability of the biosurfactant were determined. The effect of the biosurfactant on the cell growth of two strains of Rhodotorula mucilaginosa and on their removal capacity of lead (0.032 g/L) and cadmium (0.030 g/L) ions from synthetic... [more]

In the past, hydrogen was mostly produced from fossil fuels, causing a certain degree of energy and environmental problems. With the development of low-carbon energy systems, renewable energy hydrogen production technology has developed rapidly and become one of the focuses of research in recent years. However, the existing work is still limited by small-scale hydrogen production systems, and there is a lack of comprehensive research on the whole production-storage-transportation-utilization hydrogen system (PSTUH2S), especially on the modeling of different hydrogen transportation modes and various hydrogen loads in different fields. To make up for these deficiencies, the specific physical and mathematical models of the PSTUH2S are firstly described in this paper, with a full account of large-scale water-electrolytic hydrogen production from renewable power curtailment and grid power, various hydrogen storage and transportation modes, and multi-field hydrogen consumption paths. Further... [more]

Helium is an irreplaceable ore resource for many applications, such as nuclear magnetic resonance, aviation, semiconductors, and nuclear energy. Extracting helium in a free state from natural gas is currently the only economical approach at the industrial level. In this study, we compiled geochemical data of 719 natural gas samples from 36 oil and gas fields in the Tarim basin that include experimental results and previously reported data. Helium is of primarily crustal origin in the Tarim Basin according to helium isotope characteristics (not exceeding 0.1 Ra), except in the Ake gas field that has not more than 7% of mantle helium. Helium concentrations in diverse tectonic units vary considerably. Oil-type gas, on the whole, has a higher helium concentration relative to coal-type gas. Abundant helium flux, a favorable fault system between the source-reservoir system, no strong charging of gaseous hydrocarbons, and the good sealing capacity are important factors that control the format... [more]

The conductivity of propped fractures following hydraulic fracturing is crucial in determining the success of the fracturing process. Understanding the primary factors affecting fracture conductivity and uncovering their impact patterns are essential for guiding the selection of fracturing engineering parameters. We conducted experiments to test fracture conductivity and analyzed the effects of proppant particle size, closure pressure, and fracture surface properties on conductivity. Using the orthogonal experimental method, we clarified the primary and secondary relationships of the influencing factors on conductivity. The results indicate that proppant particle size, formation closure pressure, and fracture surface properties significantly affect fracture conductivity, with the order of influence being closure pressure > fracture surface properties > proppant particle size. Using large-particle-size proppants effectively increases interparticle porosity and enhances fracture conducti... [more]

Beam pumping units play a key role in oil extraction. There is an increasing demand for optimal oil-extracting performance as operational environments are becoming more challenging and complex. Therefore, it is vital to create an acceptable mathematical model and develop robust control mechanisms. In the past decades, researchers have achieved fruitful results regarding modeling and control methods in this field. This article provides a comprehensive review of the research on modeling and control methods for beam pumping units, including mathematical models based on differential equations and boundary conditions, as well as the control strategies designed. Finally, future perspectives and recommendations are presented.

The application of organometallic materials as anodes in fuel cell devices has experienced a notable increase in recent years. However, the use of POCOP pincer complexes remains scarcely explored despite their great relevance in catalysis. Thus, in this work, the electrocatalytic activity to methanol in alkaline media of three Ni(II)-based POCOP pincer complexes—[NiCl{C6H2-4-OH-2,6-(OPiPr2)2}] (a1), [NiCl{C6H2-4-OH-2,6-(OPtBu2)2}] (a2), and [NiCl{C6H2-4-OH-2,6-(OPPh2)2}] (a3)—will be discussed. The complexes were use as modifiers of carbon paste electrodes that were evaluated using cyclic voltammetry considering diverse factors, such as the absence and presence of MeOH, diverse proportions (% w/w) of the complex in the electrode, scan rate, and different MeOH concentrations. Results indicated the presence of a redox pair Ni(II)/Ni(III) with a quasi-reversible behavior in all complexes, the anodic peak currents of which were proportional to the increase in MeOH concentrations (0.05−0.3... [more]

Crude oil desalination and dehydration are necessary for storage, transportation, and processing procedures. However, the behaviour of fine emulsion droplets under an electric field has always been questioned. This paper modified the dissipative particle dynamics method (DPD) to study the deformation process of fine emulsion droplets under a high-strength electric field. Compared with the literature data, the reliability of the DPD method is confirmed. The influence of the crude oil properties and the electric field characteristics on the behaviour of the emulsion droplet was analysed, and the effect factors included electric field intensity, electric field frequency, emulsion droplet size, centre distance ratio, conservative force intensity, dissipative strength, and crude oil density. The relationship between critical electric field intensity and emulsion droplet deformation was formulated based on the simulational dates.

Cellobionic acid (CBA) can be obtained through the oxidation of cellobiose, the monomer of cellulose. CBA serves as a plant-based alternative to its stereoisomer lactobionic acid, which is used in the pharmaceutical, cosmetic, and food industries. Gluconobacter oxydans is a well-established whole-cell biocatalyst with membrane-bound dehydrogenases (mDH) for regio-specific oxidations. As G. oxydans wildtype cells show low cellobiose oxidation activities, the glucose mDH from Pseudomonas taetrolens was overexpressed in G. oxydans BP9, a multi mDH deletion strain. Whole-cell biotransformation studies were performed with resting cells of the engineered G. oxydans in stirred tank bioreactors. Initial biomass specific cellobionate formation rates increased with increasing cellobiose concentrations up to 190 g L−1, and were constant until the solubility limit. The maximal volumetric CBA formation rates and the oxygen uptake rates increased linearly with the concentration of engineered G. oxyd... [more]

The climate crisis, driven by increasing CO2 levels in the atmosphere, has heightened the need for new, environmentally friendly energy sources. Hydrogen gas, which can meet our energy needs, has become a particularly intriguing topic. This study investigated the partial oxidation reaction of methane with cordierite monolith catalysts. The Ni-coated catalysts were supported with γ-Al2O3, CeO2, ZrO2, and CeO2-ZrO2. The catalysts were tested at temperatures of 750, 800, and 850 °C with different flow rates and methane feed concentrations (2%, 5%, and 10%). It was demonstrated that catalyst activity varies depending on these parameters. It has been found that high gas hourly space velocity (GHSV) and CH4 feed rates decrease catalyst activity. The obtained reaction results indicated that the optimal reaction parameters were 800 °C, a GHSV of 1 × 104 h−1, and a CH4 feed concentration of 2%. By optimizing these parameters, catalysts with high CH4 conversion and selectivity for H2 and CO were... [more]

Redox Flow Batteries (RFBs) offer a promising solution for energy storage due to their scalability and long lifespan, making them particularly attractive for integrating renewable energy sources with fluctuating power output. This study investigates the performance of a prototype Zinc-Chlorine Flow Battery (ZCFB) designed for low-cost and readily available electrolytes. The ZCFB utilizes a saltwater electrolyte containing ZnCl2 and NaCl, paired with a mineral spirits catholyte. The electrolyte consists of a 4 M ZnCl2 and a 2 M NaCl solution, both with a pH of 4.55. The anode was a zinc metal electrode, while the cathode comprised a porous carbon electrode on a titanium grid current collector. The cell volume was approximately 4.0 mL, with separate reservoirs for the NaCl/H2O and mineral spirits electrolytes. Experiments were conducted under constant current conditions, with a 0.2 A charging current and a 5 mA discharge current chosen for optimal cell voltage. The study analyzed the rel... [more]

Blasingame production decline is an effective method to obtain permeability and single-well controlled reserves. The accurate Blasingame production decline curve needs an accurate wellbore pressure approximate solution of the real-time domain. Therefore, the aim of this study is to present a simple and accurate wellbore pressure approximate solution and Blasingame production decline curves calculation method of a multi-stage fractured horizontal well (MFHW) with complex fractures. A semi-analytical model of MFHWs in circle-closed reservoirs is presented. The wellbore pressure and dimensionless pseudo-steady productivity index JDpss (1/bDpss) are verified with a numerical solution. The comparison result reaches a good match. Wellbore pressure and Blasingame production decline curves are used to analyze parameter sensitivity. Results show that when the crossflow from matrix to natural fracture appears after the pseudo-state flow regime, the value of the inter-porosity coefficient has an... [more]

Bypass diffusers are used to drain the excess steam generated in the steam generator in case of sudden load reduction or shutdown of the steam turbine. However, the steam at the orifice outlet with the high flow velocity may reverse into the space of last-stage blades and cause forced vibration of the turbine blades. For this study, a full-scale CFD calculation model which couples the last stage and the second-last stage with the bypass diffusers was constructed. The fluid dynamic characteristics of the high-speed steam discharged from the outlet of the bypass diffusers and the effect of steam on the last-stage rotating blades were analyzed comprehensively via both steady and transient numerical methods. The steady results show that the steam at the orifice outlet of the bypass diffusers presents a typical jet flow with some steam flowing back into the last-stage blades region through the exhaust of the cylinders. This results in a notable disturbance to the last-stage rotating blades,... [more]

This research delves into the impact of Twist Winglets−Cross-Section Twist Tape (TWs-CSTT) structures within heat exchangers on thermal performance. Utilizing Computational Fluid Dynamics (CFD) and machine learning methodologies, optimal geometrical parameters for the TWs-CSTT configuration were examined. The outcomes demonstrate that fluid undergoing a rotational motion within tubes featuring this structure leads to more effective secondary flows, intensified mixing, and improved thermal boundary layer disturbance. Moreover, by integrating machine learning with multi-objective optimization techniques, the performance of heat exchangers can be accurately predicted and optimized, facilitating enhanced heat exchanger design. Through the application of the multi-objective optimization algorithm Non-dominated Sorting Genetic Algorithm II (NSGA-II), the ideal configurations for TWs-CSTT were ascertained: L1 is the cross-sectional length of the Twisted Wings, L2 is the radius of the Central... [more]

Alzheimer’s disease, characterized by a decline in cognitive functions, is frequently associated with decreased levels of acetylcholine due to the overactivity of acetylcholinesterase (AChE). Inhibiting AChE has been a key therapeutic strategy in treating Alzheimer’s disease, yet the search for effective inhibitors, particularly from natural sources, continues due to their potential for fewer side effects. In this context, three new alkaloids—oleracone L, portulacatone B, and portulacatal—extracted from Portulaca oleracea L., have recently shown promising anticholinesterase activity in vitro. However, no experimental or computational studies have yet explored their binding potential. This study represents the first comprehensive in silico analysis of these compounds, employing ADME prediction, molecular docking, molecular dynamics simulations, and MM-PBSA calculations to assess their therapeutic potential. The drug-likeness was evaluated based on Lipinski, Pfizer, Golden Triangle, and... [more]

This paper presents an interior permanent magnet eddy current heater (IPMECH) that can be driven by wind turbine, which can realize the direct conversion of wind energy to thermal energy. A power analysis method for the IPMECH is proposed. The key to this method is to consider the influence of the skin effect on the distribution of eddy currents based on Coulomb’s law, Maxwell’s equation, and the Lorentz force law. Firstly, the equivalent magnetic circuit model is established, and the mathematical analytical expressions of air gap magnetic flux density (MFD), torque and thermal power of the IPMECH are derived. Then, the air gap MFD, torque and thermal power of the IPMECH are calculated, respectively. Finally, the analytical method (AM) is verified by the finite element method (FEM) and experiments. The results show that the proposed AM is sufficient to calculate the air gap MFD and thermal power of the IPMECH. The AM provides a quick and easy way to optimize and design an IPMECH.

Photocatalysis, mainly using TiO2 as a catalyst, has emerged as a promising method to address the issue of wastewater treatment. This study explores the enhanced photocatalytic activity of TiO2 through the introduction of reduced graphene oxide (rGO) and cadmium sulfide (CdS) as selective metal dopants. The incorporation of rGO and CdS into the TiO2 lattice aims to optimize its photocatalytic properties, including bandgap engineering, charge carrier separation, and surface reactivity. The unique combination of CdS and rGO with TiO2 is expected to boost degradation efficiency and reduce the reliance on expensive and potentially harmful sensitizers. This experimental investigation involves the synthesis and characterization of TiO2-based photocatalysts. The photocatalytic degradation of methyl orange (MO) and methylene blue (MB) was assessed under controlled laboratory conditions, studying the influence of metal dopants on degradation kinetics and degradation efficiency. Furthermore, the... [more]

There is a fundamental issue in the launching system with the modular charge technology, which is an unsteady gas−solid flow in the sequence-change space within a short period of time. It leads to complex particle behavior, causing the strong pulsation of particle energy released during the combustion process. As a result, a large initial pressure wave is generated, which damages the launching stability. In this work, a 3D gas−solid flow model is developed based on the computational fluid dynamics−discrete element method (CFD-DEM) model to analyze the particle behavior in the launching system with different numbers of modules. The rationality of the model is verified through the experiment. It is found that the particles near the cover of the rightmost module move out of the module rapidly and collide with the right face of the chamber, forming a retained particle layer. When particles are stationary, the distribution of particles consists of slope accumulations and horizontal accumula... [more]

In recent years, the demand for lithium, essential to the high-tech and battery sectors, has increased rapidly. The majority of lithium carbonate is now sourced from continental brines in Latin America, owing to the lower production costs and reduced environmental impact. In Europe, often overlooked but promising lithium resources could include highly mineralized underground waters. Therefore, this study investigates the enrichment of these low-grade solutions (<100 mg/L Li) through evaporation followed by solvent extraction (SX) processes under specific conditions. The effectiveness and the technical feasibility of lithium extraction were evaluated using binary synthetic, multicomponent semi-synthetic, and real brine samples. The popular tributyl phosphate/methyl isobutyl ketone (TBP/MIBK) system, supplemented with FeCl3 and AlCl3 as co-extractants, was employed as the organic phase. Evaporation resulted in significant lithium losses (up to 80%), reduced to ~10% by washing the crys... [more]

Cheese whey (CW) is a worldwide abundant by-product of the cheese industry, which can be used for biogas production if further processing is not performed to produce other valuable food products. This study evaluates biogas production from CW in low-cost, tubular reactors, thus comparing the effect of temperature control. CW was monodigested in two tubular reactors at the pilot scale: one of them with temperature control (30 ± 3 °C) and the other one working at environmental conditions. The results show that CW could be monodigested in pilot scale tubular reactors, thus yielding high methane. Temperature control (30 ± 3 °C) at the pilot scale led to higher methane yields under all tested operating conditions, thus reaching 565.8 ± 20.9 L kg−1VS at an Organic Loading Rate (OLR) of 0.416 ± 0.160 kgVS L−1 d−1, which was higher than the maximum yield obtained without temperature control (445.6 ± 21.9 L kg−1VS) at 0.212 ± 0.020 kgVS L−1 d−1. Methane yield differences were attributed to the... [more]

Geothermal energy, recognized as a clean energy source, has attracted widespread attention for its extraction. However, it is located in deep and complex geological formations, presenting a significant challenge to the drilling operations of existing Polycrystalline Diamond Compact (PDC) drill bits. To further understand the rock-breaking mechanism of PDC cutters in deep geological formations and improve rock-breaking efficiency, a finite element model employing the cohesive zone method was developed for a saddle-shaped PDC cutter (SC). This model was validated against experimental simulations, proving its capability to capture real rock crack initiation during the simulation process accurately. By analyzing the formation of cracks under cutting forces, the SC’s rock-breaking mechanism was explored and compared with conventional cutters (CCs), clarifying its advantages. Additionally, the model analyzed the effects of different confined pressures, back rake angles, and structural parame... [more]

Supramolecular solvent-based extraction (SUPRAS) stands out as a promising approach, particularly due to its environmentally friendly and efficient characteristics. This research explores the optimization of SUPRAS extraction for sango radish and kale microgreens, focusing on enhancing the extraction efficiency. The Taguchi experimental design and artificial neural network (ANN) modeling were utilized to systematically optimize extraction parameters (ethanol content, SUPRAS: equilibrium ratio, centrifugation rate, centrifugation time, and solid-liquid ratio). The extraction efficiency was evaluated by measuring the antioxidant activity (DPPH assay) and contents of chlorophylls, carotenoids, phenolics, and anthocyanidins. The obtained results demonstrated variability in phytochemical contents and antioxidant activities across microgreen samples, with the possibility of achieving high extraction yields using the prediction of optimized parameters. The optimal result for sango radish can... [more]