The maximal power that is absorbed by a wave energy converter can be estimated from the far-field behavior of the waves that are radiated by the device. For realistic estimates, constraints must be used to enforce restrictions on the set of admissible motions when deriving the maximal absorption width. This work is dedicated to the numerical computation of the maximal absorption width under constraints for devices with several non-trivial degrees of freedom. In particular, the method is applied to a model of SBM Offshore’s S3 wave energy converter, a bulging horizontal cylinder. The results are compared with a more classical approach, which consists of computing the linear dynamic response of the wave energy converter interacting with the waves. The far-field maximal absorption width can be seen as an upper bound to evaluate what would be the power captured by a perfect control strategy. The method also shows that the absorption width of the S3 wave energy converter is larger for wavel... [more]

In Longwall Top-Coal Caving (LTCC), the shape of the loose body (LB) and top-coal boundary (TCB) formed after the first coal-drawing are the initial conditions for the common coal-drawing period. Taking the Panel 12309 in Wangjialing coal mine as the research object, the weight of the blocks of caved top coal was measured on-site, and the distribution of their equivalent diameter was calculated. By using a coupled numerical method, the “Finite difference method (FDM)−Discrete element method (DEM)” numerical model was established, and the evolutions of the drawing body (DB), LB, and TCB were obtained. The results show that, in the initial stage of first coal-drawing (0−8.09 s), the amount of DB reached its maximum of 7.18 m3 (0.89 m3/s) and then decreased to a stable value of 0.44 m3/s. The relationships between the characteristic parameters of DB, LB, and TCB and the drawing time were fitted. Taking the second derivative of each parameter with respect to time as its sensitivity (η), it... [more]

To advance commercialisation of ocean wave energy and for the technology to become competitive with other sources of renewable energy, the cost of wave energy harvesting should be significantly reduced. The Mediterranean Sea is a region with a relatively low wave energy potential, but due to the absence of extreme waves, can be considered at the initial stage of the prototype development as a proof of concept. In this study, we focus on the optimisation of a multi-mode wave energy converter inspired by the CETO system to be tested in the west of Sicily, Italy. We develop a computationally efficient spectral-domain model that fully captures the nonlinear dynamics of a wave energy converter (WEC). We consider two different objective functions for the purpose of optimising a WEC: (1) maximise the annual average power output (with no concern for WEC cost), and (2) minimise the levelised cost of energy (LCoE). We develop a new bi-level optimisation framework to simultaneously optimise the W... [more]

Catalytic hydrocracking represents an optimal process for both heavy petroleum fractions and Fischer−Tropsch (FT) wax upgrading because it offers high flexibility regarding the feedstock, reaction conditions and products’ quality. The hydrocracking of a heavy vacuum gas oil with FT wax was carried out in a continuous-flow catalytic unit with a fixed-bed reactor and a co-current flow of the feedstock and hydrogen at the reaction temperatures of 390, 400 and 410 °C and a pressure of 8 MPa. The increasing reaction temperature and content of the FT wax in the feedstock caused an increasing yield in the gaseous products and a decreasing yield in the liquid products. The utilisation of the higher reaction temperatures and feedstocks containing the FT wax showed a positive influence on the conversion of the fraction boiling above 400 °C to lighter fractions. Although the naphtha and middle distillate fractions obtained via atmospheric and vacuum distillations of the liquid products of hydrocr... [more]

The future European power system is projected to rely heavily on variable renewable energy sources (VRES), primarily wind and solar generation. However, the difficulties inherent to storing the primary energy of these sources is expected to pose significant challenges in terms of their integration into the system. To account for the high variability of renewable energy sources VRES, a novel pan-European dispatch model with high spatio-temporal resolution including load shifting is introduced here, providing highly detailed information regarding renewable energy curtailments for all Europe, typically underestimated in studies of future systems. which also includes modeling of load shifting. The model consists of four separate levels with different approaches for modeling thermal generation flexibility, storage units and demand as well as with spatial resolutions and generation dispatch formulations. Applying the developed model for the future European power system follows the results of... [more]

Lighting provides an indispensable energy service, illumination. The field of societal exergy analysis considers light (and many other energy products) to be enablers of economic growth, and lighting contributes a non-negligible proportion of total useful exergy supplied to modern economies. In societal exergy analysis, the exergetic efficiency of electric lamps is central to determining the exergy contribution of lighting to an economy. Conventionally, societal exergy practitioners estimate the exergetic efficiency of lamps by an energy efficiency, causing confusion and, sometimes, overestimation of exergetic efficiency by a factor as large as 3. In response, we use recent results from the fields of radiation thermodynamics and photometry to develop an exact method for calculating the exergy of light and the exergetic efficiency of lamps. The exact method (a) is free of any assumptions for the value of the maximum luminous efficacy, (b) uses a non-unity spectral exergy-to-energy ratio... [more]

This article presents a case study of a single-family house, whose current energy source is electricity only. Nine years ago, the heat source for the heating system and domestic hot water was an oil boiler, which was changed to an air−water heat pump. Four years ago, when Poland formed the basis of the prosumer market, the first photovoltaic system was established. It was expanded in the following years. In this work are presented the impact of using a heat accumulator on the coefficient of performance of the heat pump, the self-consumption of energy from the photovoltaic system, and the cost of purchasing energy. Comparative calculations were made, with the demand-side management (DSM) active on work days, and on free days (weekends and public holidays) it was not. Attention was paid to the self-consumption factor depending on the algorithms used in an energy meter. The prosumer market in Poland was also described. The calculations described the house as having an annual energy self-c... [more]

The paper presents an application of the homotopy analysis method for solving the one-phase fractional inverse Stefan design problem. The problem was to determine the temperature distribution in the domain and functions describing the temperature and the heat flux on one of the considered area boundaries. It was demonstrated that if the series constructed for the method is convergent then its sum is a solution of the considered equation. The sufficient condition of this convergence was also presented as well as the error of the approximate solution estimation. The paper also includes the example presenting the application of the described method. The obtained results show the usefulness of the proposed method. The method is stable for the input data disturbances and converges quickly. The big advantage of this method is the fact that it does not require discretization of the area and the solution is a continuous function.

Structure design is of great value for the performance improvement of solid oxide electrolysis cells (SOECs) to diminish the gap between scientific research and industrial application. A comprehensive multi-physics coupled model is constructed to conduct parameter sensitivity analysis to reveal the primary and secondary factors on the SOEC performance and optimal rib width. It is found that the parameters of the O2 electrode have almost no influence on the optimal rib width at the H2 electrode side and vice versa. The optimized rib width is not sensitive to the electrode porosity, thickness, electrical conductivity and gas composition. The optimal rib width at the H2 electrode side is sensitive to the contact resistance at the interface between the electrode and interconnect rib, while the extremely small concentration loss at the O2 electrode leads to the insensitivity of optimal rib width to the parameters influencing the O2 diffusion. In addition to the contact resistance, the appli... [more]

With the introduction of the more electric aircraft, there is growing emphasis on improving overall efficiency and thus gravimetric and volumetric power density, as well as smart functionalities and safety of an aircraft. In future on-board power distribution networks, so-called high voltage DC (HVDC, typically +/−270VDC) supplies will be introduced to facilitate distribution and reduce the associated mass and volume, including harness. Future aircraft power distribution systems will also very likely include energy storage devices (probably, batteries) for emergency back up and engine starting. Correspondingly, novel DC-DC conversion solutions are required, which can interface the traditional low voltage (28 V) DC bus with the new 270 V one. Such solutions presently need to cater for a significant degree of flexibility in their power ratings, power transfer capability and number of inputs/outputs. Specifically, multi-port power-scalable bi-directional converters are required. This pape... [more]

In some areas, the problem of wind and solar power curtailment is prominent. Hydrogen energy has the advantage of high storage density and a long storage time. Multi-energy hybrid systems including renewable energies, batteries and hydrogen are designed to solve this problem. In order to reduce the power loss of the converter, an AC-DC hybrid bus is proposed. A multi-energy experiment platform is established including a wind turbine, photovoltaic panels, a battery, an electrolyzer, a hydrogen storage tank, a fuel cell and a load. The working characteristics of each subsystem are tested and analyzed. The multi-energy operation strategy is based on state monitoring and designed to enhance hydrogen utilization, energy efficiency and reliability of the system. The hydrogen production is guaranteed preferentially and the load is reliably supplied. The system states are monitored, such as the state of charge (SOC) and the hydrogen storage level. The rated and ramp powers of the battery and f... [more]

A micro-scale district heating network based on the operation of solar thermal collectors coupled to a long-term borehole thermal storage is modeled, simulated and investigated over a period of five years. The plant is devoted to covering the domestic hot water and space heating demands of a district composed of six typical residential buildings located in Naples (southern Italy). Three alternative natural gas-fueled back-up auxiliary systems (condensing boiler and two different technologies of micro-cogeneration) aiming at balancing the solar energy intermittency are investigated. The utilization of electric storages in combination with the cogeneration systems is also considered with the aim of improving the self-consumption of cogenerated electric energy; heat recovery from the distribution circuit is also evaluated to pre-heat the mains water for domestic hot water production. The performances of the proposed plant schemes are contrasted with those of a typical Italian decentralize... [more]

Various challenges are acknowledged in practical cases with high wind power penetration. Fault ride-through (FRT) capability has become the most dominant grid integration requirements for the wind energy conversion system worldwide. The high voltage ride-through (HVRT) and low voltage ride-through (LVRT) performance play a vital role in the grid-friendly integration into the system. In this paper, a coordinated HVRT and LVRT control strategy is proposed to enhance the FRT capability of the permanent magnet synchronous generator (PMSG)-based wind turbine generators (WTG). A dual-mode chopper protection is developed to avoid DC-link overvoltage, and a deadband protection is proposed to prevent oscillations under edge voltage conditions. The proposed strategy can ride through different levels of voltage sags or swells and provide auxiliary dynamic reactive power support simultaneously. The performance of the proposed control scheme is validated through various comparison case tests in PSC... [more]

Energy storage is recognized as a key technology for enabling the transition to a low-carbon, sustainable future. Energy storage requires careful management, and capacity prediction of a lithium-ion battery (LIB) is an essential indicator in a battery management system for Electric Vehicles and Electricity Grid Management. However, present techniques for capacity prediction rely mainly on the quality of the features extracted from measured signals under strict operating conditions. To improve flexibility and accuracy, this paper introduces a new paradigm based on a multi-domain features time-frequency image (TFI) analysis and transfer deep learning algorithm, in order to extract diagnostic characteristics on the degradation inside the LIB. Continuous wavelet transform (CWT) is used to transfer the one-dimensional (1D) terminal voltage signals of the battery into 2D images (i.e., wavelet energy concentration). The generated TFIs are fed into the 2D deep learning algorithms to extract th... [more]

This paper is about the problem of the management of an aggregator of electric vehicles participating in an electricity market environment. The problem consists in the maximization of the expected profit through a formulation given by a stochastic programming problem to consider the uncertainty faced by the aggregator. This uncertainty is due to the day-ahead market prices and the driving requirements of the owners of the vehicles. Depending on the consent of the owners, inflexible charging to flexible charging is considered. Thus, the aggregator can propose different profiles and charging periods to the owners of electric vehicles. Qualitatively, as expected, the more flexible the vehicle owners, the higher the expected profit. The formulation, however, offers more to the aggregator and provides the ability to quantify the influence of consent of favorable driving requirements in the expected profit, allowing the aggregator to consider rewarding the owners of vehicles with more flexib... [more]

This paper presents a closed-form quite handy formula for the local thermal resistance Rb between the temperature of the bulk heat-carrier fluid in the pipes, equally spaced on a concentric circle inside a circular energy pile, and the mean temperature at the periphery of the pile. The so-called multipole method is used to calculate the temperature field. An important improvement of the multipole method is presented, where Cauchy’s mean value theorem of analytical functions is used. The formula for thermal resistance Rb0 for the zero-order approximation (J = 0), where only line heat sources at the pipes are used, is presented. The errors using zeroth-order approximation (J = 0) are shown to be quite small by comparisons with eight-order approximation (J = 8) with its accuracy of more than eight digits. The relative error for the local thermal resistance Rb0 for the zero-order approximation (J = 0) lies below 5% for a wide range of input parameter values. These ranges are judged to cove... [more]

The shortage of resources and increasing climate changes have brought the need for sustainable and renewable resources to people’s attention. Biomass is an earth-abundant material and has great potential as a feedstock for alternative fuels and chemicals. For the effective utilization of biomass, this biopolymer has to be depolymerized and transformed into key building blocks and/or the targeted products, and biological or chemical catalysts are commonly used for the rapid and energy-efficient reactions. This Special Issue introduces recent advances in the catalytic conversion of biomass into biofuels and value-added products.

Local driving cycles (LDCs) capture local traffic characteristics, while standard driving cycles (SDCs) compare vehicles in distinct regions. There is a plethora of LDCs, raising the question as to how distinct they are. To quantify it, we first organized a collection of 77 LDCs. From the speed—time images, it was possible to extract numerical vectors of 40 cycles in a standardized way. Comparing the LDCs developed for cars, we found that their parameters fluctuate significantly: the average speed varies from 14.7 to 44.7 km/h, and the fuel economy varies from 10.8 to 20.5 km/L. Comparing the LDCs with FTP-75 cycle, the difference in speed is 7 km/h, and in fuel economy is 1.5 km/L. For WLTC, the difference is 19.4 km/h and 3 km/L, respectively. Thus, given the deviations found between the analyzed LDCs, and between LDCs and SDCs, the numerical results reinforce the relevance of using LDCs for each region.

An accurate understanding of formation and gas properties is crucial to the efficient development of shale gas resources. As one kind of unconventional energy, shale gas shows significant differences from conventional energy ones in terms of gas accumulation processes, pore structure characteristics, gas storage forms, physical parameters, and reservoir production modes. Traditional experimental techniques could not satisfy the need to capture the microscopic characteristics of pores and throats in shale plays. In this review, the uniqueness of shale gas reservoirs is elaborated from the perspective of: (1) geological and pore structural characteristics, (2) adsorption/desorption laws, and (3) differences in properties between the adsorbed gas and free gas. As to the first aspect, the mineral composition and organic geochemical characteristics of shale samples from the Longmaxi Formation, Sichuan Basin, China were measured and analyzed based on the experimental results. Principles of d... [more]

Thermal gas meters represent a promising technology for billing customers for gaseous fuels, however, it is essential to ensure that measurement accuracy is maintained in the long term and in a broad range of operating conditions. The effect of hydrogen addition to natural gas will change the physicochemical properties of the mixture of natural gas and hydrogen. Such a mixture will be supplied through the gas system, to consumers, including households, where the amounts of received gas will be metered. The physicochemical properties of hydrogen, including the specific density or viscosity, differ significantly from those of the natural gas components, such as methane, ethane, propane, nitrogen, etc. Therefore, it is of utmost importance to establish the impact of the changes in the gas composition caused by the addition of hydrogen to natural gas on the metrological properties of household gas meters, including thermal gas meters. Furthermore, since household gas meters can be installe... [more]

This paper presents a reliable and fast index to detect the instant of arc extinction for adaptive single-pole automatic reclosing (ASPAR). The proposed method is a simple technique for ASPAR on shunt compensated transmission lines using the Hilbert−Huang Transform (HHT). The HHT method is a combination of the empirical mode decomposition (EMD) and the Hilbert transform (HT). The first intrinsic mode function (IMF1) decomposed by EMD, which contains high frequencies of the faulty phase voltage, was used to calculate the proposed index. HT calculates the first IMF spectrum in the time-frequency domain. The presented index is the sum of all frequency contents below 55 Hz, which remains very low until the fault clearance. The proposed method uses a global threshold level and therefore no adjustment is needed for different transmission systems. This method is effective for various system configurations including different fault locations, line loading, and various shunt reactor configurati... [more]

This study applies the SPecific Exergy COsting (SPECO) methodology for the exergoeconomic assessment of a compact electricity-cooling cogeneration system. The system utilizes the exhaust gases from a 126 hp Otto-cycle internal combustion engine (ICE) to drive a 5 RT ammonia−water absorption refrigeration unit. Exergy destruction is higher in the ICE (67.88%), followed by the steam generator (14.46%). Considering the cost of destroyed exergy plus total cost rate of equipment, the highest values are found in the ICE, followed by the steam generator. Analysis of relative cost differences and exergoeconomic factors indicate that improvements should focus on the steam generator, evaporator, and absorber. The cost rate of the fuel consumed by the combustion engine is 12.84 USD/h, at a specific exergy cost of 25.76 USD/GJ. The engine produces power at a cost rate of 10.52 USD/h and specific exergy cost of 64.14 USD/GJ. Cooling refers to the chilled water from the evaporator at a cost rate of... [more]

Vertical axis Darrieus turbine is the key component for ocean energy conversion and utilization. In the present work, the energy performance, flow pattern, and radial force for a vertical axis Darrieus turbine were investigated. The experimental measurements and numerical simulations were in good agreement, which validates the accuracy and reliability of the numerical method. The results showed that the power coefficient gradually increased with the increase of tip speed ratio λ, and the power coefficient had three peaks in a revolution of runner due to three blades. The complex vortex induced by the turbine revolution mainly includes the blade tip vortex and blade surface vortex, which are related to the turbine rotation and flow separation on blade surface. The vorticity transport equation was first introduced to analyze the mechanism and evolution of vortex in a vertical axis Darrieus turbine, and the results revealed that the relative vortex elongation term is the main driving forc... [more]

Thermal hydraulic performance of the fin-and-tube heat exchanger is presented in this paper. The purpose of this investigation was to investigate the heat transfer mechanism and flow characteristics in the finned tube heat exchanger with streamline tube. The streamline tube in this paper had the streamline cross section which was composed of a semicircle and a half diamond. Three-dimensional numerical simulation was presented and validated by the experiment and the other numerical simulation from public articles. The present simulation had good agreement with the experimental results. The difference of the j factor and f factor between the experimental results and present simulation results by k-ε-enhance model was less than 7.6%. The geometrical parameters were considered as every single variable to investigate the thermal hydraulic performance. The results showed that smaller transversal and larger tube pitch provided greater compactness and better thermal performance. Moreover, a la... [more]

Coal is a complex heterogeneous and anisotropic material conformed with fractal characteristics. The pore and fracture characteristics have important influence on the dynamic disasters including rock burst and gas outburst, however, the relationship between them is not accurately investigated due to inadequate research method. The pore and fracture distribution of coal with different bursting proneness were obtained by comprehensive application of MIP, LTNAD, SEM, and X-ray CT, and then fractal theory and DIC were used to research the pore and fracture characteristics. The result indicated that the modification of MIP result by LTNAD result could effectively eliminate the adverse effect of coal matrix compressibility, exactly reflect the distribution of pore and fracture in coal, and the pore distribution of coal with different bursting proneness were quite different. Gray scale image from SEM and 3D reconstruction technology based on X-ray CT could show the geological structure, fract... [more]