To achieve carbon neutrality, the installation of variable renewable energy (VRE) has been accelerated. However, the inherent variability of VRE can be mitigated through the installation of energy storage. This study aims to evaluate life cycle impacts of energy storage systems utilizing batteries, hydrogen storage, or thermal energy storage. A model of the energy storage systems with VRE was developed, and the annual energy flow simulations were conducted. The energy storage system targeted in this study assumed that all energy derived from VRE was stored in the energy storage and supplied to consumers. The amount of electricity to-be-sold from the energy storage system, based on the capacity of VRE and the installed energy storage, was calculated. A life cycle assessment was performed to evaluate the greenhouse gas (GHG) emissions, abiotic resource depletion (ARD), and intensity of GHG and ARD as life cycle impacts. The smallest life cycle impacts varied depending on the type and sca... [more]

This study evaluates the environmental impact of carbon capture technology in the context of reducing industrial CO2 emissions within Eco-Industrial Parks (EIP). The primary focus is on the post-combustion absorption process, which uses solvents like monoethanolamine (MOA) to capture CO2 before it is released into the atmosphere. The captured CO2 is either stored or utilized to prevent further contribution to climate change. The study employs a Life Cycle Assessment (LCA) methodology to compare the environmental impacts of two scenarios: one with CO2 capture and the other with the direct release of CO2 into the atmosphere. The LCA considers inputs, outputs, energy requirements, and materials needed for the CO2 absorption process. The functional unit of the assessment is 1000 tons of CO2, to standardize comparisons between both scenarios. Results show that the CO2 absorption process significantly reduces the impact on climate change, capturing over 80% of the CO2 from the stream. In ter... [more]

Industrial ecology appears to be a significant means of reducing carbon dioxide emissions from industry. However, beyond flow management, eco-industrial parks can also contribute to a socio-economic transition on a regional scale. Usually, multi-criteria optimization models use economic and environmental criteria in the decision-making process. This article looks at the integration of social criteria in these models, and more broadly at the issues involved in measuring the social impact of an eco-industrial park. The aim of this article is to take a different approach to social indicators, by highlighting the key success factors of an eco-industrial park, such as cooperation within a collective but also between the different scales making up the system. This work is based on bibliographical research and semi-structured interviews with stakeholders in the field. What's more, the process of developing social indicators, particularly participatory ones, seems to be a strong catalyst in th... [more]

Hydrogen is increasingly recognized as a key player in future energy systems. However, its production technologies—Steam Methane Reforming (SMR) and electrolysis—present trade-offs. SMR, the dominant method, is cost-effective but has a significant carbon footprint, emitting substantial greenhouse gases (GHGs). In contrast, electrolysis, powered by renewable energy sources, offers a cleaner alternative, albeit at a higher cost. While current hydrogen system optimizations primarily focus on cost reduction and GHG mitigation, they often neglect broader environmental impacts. This paper addresses the challenge of modeling a hydrogen supply chain (HSC) that achieves strong environmental performance at a relatively affordable cost. To this end, a supply chain design optimization is coupled with Life Cycle Assessment (LCA). The novelty of this work lies in the integration of multiple LCA indicators in the supply chain design optimization, rather than focusing solely on costs and Global Warmin... [more]

Ensuring access to clean water, preserving water reserves, and meeting energy needs are fundamental for sustainability and a priority for global organizations like the UN and EU. The Mediterranean, particularly Greece, faces severe water imbalances due to rising demand, prolonged droughts, and seasonal tourism pressure. This over-exploitation of water resources threatens agriculture, employment, and regional sustainability. Addressing these challenges, this study analyzes the water-energy nexus in high-stress areas and develops an optimization model for sustainable water resource management. The model integrates sectoral demands, energy consumption, and seasonal variability to improve efficiency while balancing economic and environmental constraints. Additionally, it incorporates demand forecasting to align water use with ecosystem sustainability, reducing environmental impacts. By providing a systematic framework for decision-makers, this research supports the development of long-term... [more]

Climate change, primarily caused by the excessive emission of greenhouse gases, particularly carbon dioxide (CO2), has intensified global efforts toward achieving carbon neutrality. In this context, renewable energy and CO2 utilization technologies have emerged as key strategies for reducing reliance on fossil fuels and mitigating environmental impacts. In this work, a superstructure model is developed to integrate renewable energy network and chemical production processes. The energy network integrates wind, solar, and biomass energy, complemented by storage systems to enhance reliability and reduce reliance on external power sources. The reaction network features various pathways that utilize CO2 as a raw material to produce high value-added chemicals such as polyglycolic acid (PGA), ethylene-vinyl acetate (EVA), and dimethyl carbonate (DMC), allowing for efficient conversion and resource utilization. A mixed-integer linear programming (MILP) model is formulated to minimize productio... [more]

The climate crisis continues to grow as an existential threat. Establishing reliable energy resources that are renewable and zero-carbon emitting is a critical endeavour. Hydrogen has emerged as one such critical resource due to its high gravimetric energy density and near-abundant availability. However, it suffers from low volumetric energy density and is incredibly challenging to store and transport. The metal hydride, a solid-state storage method, provides a viable solution to the current limitations. Storage is achieved through the chemical absorption of hydrogen into a porous metal alloy’s sublattice. But its challenging thermodynamic functionality leaves a gap between the ideal storage capacity that current industry requires and the limited capacity that reusable metal hydrides currently provide. This work used mathematical modelling to determine optimal operating conditions for a metal hydride in order to maximise hydrogen storage capacity. Computational fluid dynamics is used t... [more]

One of the proposed strategies to reach net-zero goals is the diversification of a country’s energy mix and transition to technologies that favour the mitigation of greenhouse gas emissions, while decreasing dependency on conventional fuels. This work presents a mathematical model that describes key production routes for two proposed energy transition vectors, biomethane and hydrogen, expressed as a Mixed-Integer Linear Problem (MILP). The supply chain is optimized with the objective of maximizing the profits from the global supply chain. The problem is formulated as an allocation problem, with production distributed between biomethane and hydrogen markets. The case study focuses on a region in Mexico where second-generation biomass for biogas production is abundant, while hydrogen is produced from biomethane using steam methane reforming. The results highlight the importance of balancing resource allocation in shared supply chains. With a production ratio of 60% biomethane and 40% hyd... [more]

The use of waste heat from electrolysis can significantly increase process efficiency. Alkaline and PEM electrolyzers, the most mature technologies, produce low-temperature waste heat. Most studies focus on using this waste heat for low-temperature applications like district heating. Alternatively, this waste heat can be upgraded to a temperature that can be usable in the chemical industry, e.g., for steam generation. The combination of an alkaline electrolyzer with a heat pump has been recently investigated to supply both hydrogen and medium-temperature heat. Optimizing electrolyzers for both hydrogen and heat production (combined design) has been shown to have advantages over optimizing for hydrogen only and upgrading the waste heat a posteriori (separate design). However, the effects of electrolyzer pressure and hydrogen compression were not considered, and it remains unclear if similar benefits apply to PEM electrolyzers. This work further analyzes the combined system (i.e., electr... [more]

A transition to low-carbon fuels is integral in addressing the challenge of climate change. An essential transformation is underway in the transportation sector, one of the primary sources of global greenhouse gas emissions. The electrofuels that represent methanol synthesis via power-to-fuel technology have the potential to decarbonize the sector. This paper outlines a critical comprehensive life cycle assessment for electrofuels, with this study focusing on the production of synthetic methanol from renewable hydrogen from water electrolysis coupled with carbon from the direct air capture (DAC) process. This study has provided a comparison of the environmental impacts of synthetic methanol produced from grids of five regions (India, the US, China, Switzerland, and the EU) with conventional methanol from coal gasification and natural gas reforming. The results from this impact assessment show a high dependency of environmental scores on the footprint of the grid. Switzerland, with its... [more]

This study designs a green hydrogen supply chain for Portugal, focusing on minimizing both economic costs and water stress. The research uses a multi-objective simulated annealing algorithm to address the trade-offs between the two objectives. The process of producing hydrogen via electrolysis is highly water-intensive, posing a challenge in water-scarce regions like southern Portugal. The study considers Portugal's uneven water distribution, renewable energy availability and, different hydrological conditions across districts. An aggregate indicator, Water Stress Index (TWSI), quantify the pressure on water resources covering all the Portugal´s districts in a single score. This study explores four scenarios, a baseline scenario, a green hydrogen scenario using only renewable energy, drought conditions, and increased demand in major cities with drought conditions. The quasi pareto front illustrates the trade-offs between supply chain cost and TWSI, enabling decision-makers to select s... [more]

In 2022 the Dutch Energy System used some 2700 PJ of energy. Some 86% of its input was natural gas, crude oil and coal. The other 14% were renewables. A network of power-generation units, refineries and petrochemical complexes converted fossil resources into heat (700 PJ), power (400 PJ), transportation fuels (500 PJ) and chemicals (400 PJ). Some 700 PJ were lost due to conversion and transport. CO2 emissions were 160 Mt in 2022 of which 65 Mt by industry and 30 Mt by mobility. Transformation of this system into a Net Zero CO2 system calls for replacement of fossil resources by renewable heat, power and carbon. Decarbonisation of heat & power for residential and mobility is well underway at the moment. However, decarbonisation of industry and recarbonisation of shipping & aviation fuels, as well as recarbonisation of feeds for chemicals, is hampering progress. This paper concludes that current policies, predominantly based on trading CO2 emission certificates (ETS) is insufficient for... [more]

Hydrogen is a key element in the global transition toward a low-carbon economy, with green hydrogen offering significant potential to decarbonize industries and energy systems. This study focuses on designing and optimizing a green hydrogen supply chain (HSC) for the state of Bahia, Brazil, using a deterministic Mixed-Integer Linear Programming (MILP) model. The model evaluates 24 scenarios combining production sites, storage technologies, transportation methods, and energy sources, minimizing the Total Sustainable Cost (TSC). The TSC integrates financial and environmental costs, monetizing CO2 emissions using international carbon pricing. Results indicate that economies of scale play a critical role allowing the minimization of the financial costs while achieving lower greenhouse gas (GHG) emissions compared to other scenarios. The study emphasizes the importance of aligning production strategies with regional renewable energy resources to enhance both cost-effectiveness and sustainab... [more]

Methanol and ammonia are key energy carriers in a decarbonized society. This study assesses their use in power generation via two pathways: direct utilization as green fuels in fuel cells or as hydrogen carriers. Using these chemicals as hydrogen carriers achieves higher efficiencies (around 40%) due to the maturity of hydrogen fuel cells, resulting in electricity costs around 700 €/MWh compared to 1200 €/MWh for direct utilization. While hydrogen offers lower electricity production costs, efficiency advancements in methanol and ammonia fuel cells could enhance their competitiveness. Additionally, for scenarios involving transportation and power generation, methanol and ammonia prove economically viable, particularly for distances exceeding 3000 km. Consequently, both are crucial for addressing hydrogen-related challenges in the new renewable energy systems.

Decarbonizing industries could significantly increase electricity demand, necessitating strategic grid expansion. This study evaluates the impact of decarbonizing the Pulp and Paper Sector under four 2050 scenarios: carbon capture, biomass-based, direct electrification, and indirect electrification. A bottom-up approach is employed to estimate 2020 final energy demand by heat grade and subsector. Both final and primary energy demand systems are modeled, accounting for the efficiencies of end-use technologies and primary energy transformation processes. The analysis compares primary renewable energy demand (electricity and biomass) normalized per ton of equivalent CO2 avoided against a business-as-usual scenario. It also considers the requirements for wood residues, organic waste, and CO2 storage. The carbon capture scenario, while low in electricity demand, requires significant organic waste for renewable natural gas production and 2.6 Mt of CO2 storage to offset direct and indirect em... [more]

This study optimizes the Sustainable Aviation Fuel Supply Chain Network (SAFSCN) in the Czech Republic, using wheat straw as feedstock. It integrates geospatial data, transportation logistics, and economic feasibility, applying mixed-integer linear programming (MILP) to optimize pyrolysis plant locations and minimize costs. Sensitivity analysis varied wheat production growth by ±0.1% and ±0.2%. Results confirm Sustainable Aviation Fuel (SAF) production is technically and economically viable, with costs projected to decline up to 30.64% and revenues rising 49.07% from 2030 to 2050 due to technological advancements, improved logistics, and economies of scale. The findings underscore the critical role of SAF in achieving EU aviation decarbonization targets and highlight the importance of efficient supply chain planning for scaling SAF production.

Endpoint indicators provide a concise representation of environmental impacts by aggregating multiple midpoint indicators into a single value. Traditional endpoint weighting systems, however, are often limited by biases introduced through panel reviews and a lack of robustness in scientific process models. Additionally, they typically fail to account for the preferences of key stakeholders, including industry, government, and the public. This work addresses these limitations by developing an endpoint indicator that incorporates stakeholder preferences and minimizes dissatisfaction. A multi-stakeholder optimization framework was formulated to achieve this goal, employing distance, downside risk, and conditional value at risk as objective functions. Stakeholder preferences were derived from emissions data for industry, federal spending on environmental issues for government, and public surveys for societal input. Results highlight regional variations in midpoint indicator weightings acro... [more]

In this paper, we present a systematic approach to quantify the safe operating window of a proton exchange membrane water electrolysis (PEMWE) system considering energy intermittency and varying hydrogen demand. The PEMWE model has been developed based on first principles, with the polarization curve validated against a lab-scale experimental setup. The impact of key operational variables is investigated which include voltage, inlet temperature, and water flowrate (utilized for both feed and system cooling). Emphasis is given on operating temperature, a safety-critical variable, as its elevation can pose significant hydrogen safety risks within both the electrolyzer cells and the storage system. The impact of temperature on process safety is quantified via a risk index considering the fault probability and consequence severity. Process operability analysis is employed to assess the achievability of a safe and feasible region for design and operations. This analysis provides a comprehen... [more]

Hydrothermal liquefaction (HTL) has proven to be an appropriate technology for converting sewage sludge into a valuable resource for renewable energy generation. This study focuses on a prospective analysis of various technological scenarios for sewage sludge-to-fuel pathways via HTL, co-located with a wastewater treatment plant, in support of a circular economy perspective. Four technological foreground scenarios and three prospective background scenarios aligned with the Paris agreement’s climate targets REMIND-SSP2-Base (projecting a 3.5°C temperature rise by the end of the century), PKBudg1150 (aiming to limit the rise to below 2°C), and PKBudg500 (targeting a cap below 1.5°C) are analyzed for sewage sludge-to-fuel conversion in 2030, 2040, and 2050. The superstructure problem of the possible combinations of the developed scenarios is solved using the P-graph studio which is based on the branch and bound approach. The goal of this study is to maximize the objective function (OF) by... [more]

Heat pumps play a crucial role in decarbonizing the chemical industry. The integration and sizing of heat pumps in chemical processes is a challenging task in multi-product chemical processes due to the fluctuating waste heat supply and heat demand. Integrating heat pumps may require a retrofit of the utility system. Mathematical optimization is a useful tool to tackle this challenge by enabling the analysis of correlation between relevant system parameters and equipment sizing. This study demonstrates the utilization of mathematical optimization and parameter studies for utility system equipment sizing addressing fluctuating heat supply and demand profiles.

The aluminium industry emits approximately 1.1 billion tonnes of CO2-eq annually, contributing about 2% of global industrial emissions. Decarbonization pathways aim to achieve net-zero emissions by 2050, but this requires making decisions today for technologies having lifetimes of 20 – 25 years, based on uncertain economic assumptions, particularly given the volatility of energy prices. Traditional price forecasting models often fail to anticipate major disruptions, such as the 2022 energy crisis. This work applies Monte-Carlo Analysis (MCA) to evaluate the financial stability of decarbonization pathways under energy crisis scenarios and report on the resilience of the alternative solutions. In the modelled secondary aluminium production facility, direct electrification is assumed for lower temperature furnaces of annealing heat treatments or preheating, while the study defines the decarbonization options based on the melter furnace technology, a key bottleneck in terms of load and via... [more]

Energy storage is essential for transitioning to a renewable system based on renewable sources. To meet this challenge, Power-to-X technologies are attracting more attention. This work explores converting the excess of electric energy obtained from wind or solar sources into hydrogen and then into methane leveraging existing natural gas infrastructure for easier storage and transport. The process involves two stages: Firstly, the methane production step using Power-to-X technologies during excess renewable energy periods and, secondly, the electricity generation step during high demand with CO2 capture for reuse in methane synthesis, forming a closed carbon loop. In this way the Power-to-X process is integrated with repurposed combined cycle power plants (CCPPs) creating a Power-to-methane-to-power system. Two approaches are evaluated: oxy-combustion, which simplifies process CO2 purification and air combustion, which needs a more complex CO2 purification, such as amine absorption or P... [more]

The reduction and recovery of organic fraction of municipal solid waste is a major challenge for contemporary society. It requires the establishment of regional strategies with minimized environmental impact. This study employs life cycle assessment to evaluate the respective environmental performances of the current French system based on incineration, and those of alternative systems including (i) anaerobic digestion with composting and (ii) composting for biowaste treatment under different energy scenarios. The environmental impacts of Parisian biowaste are calculated by considering incineration technologies in the area, the French energy mix in 2022, the average European energy mix in 2022 and the projected French energy mix for 2030. The results show that the proportion of fossil-based sources in the energy mixes significantly influences the environmental performance of waste management systems. Energy mixes based in high-carbon fossil sources dependency tend to favour incineratio... [more]

Reduction of greenhouse gas emissions is an important environmental element to actively combat the global warming and climate change. In view of reducing the CO2 concentration from the atmosphere, the Direct Air Capture (DAC) options are promising technologies in delivering negative carbon emissions. The integration of renewable-powered DAC systems with the CO2 utilization technologies can deliver both negative carbon emissions as well as reduced energy and economic penalties of overall decarbonized processes. This work evaluates the innovative energy- and cost-efficient potassium - calcium looping cycle as promising direct air capture technology integrated with various CO2 catalytic transformations into basic chemicals / energy carriers (e.g., synthetic natural gas, methanol etc.). The integrated system will be powered by renewable energy (in terms of both heat and electricity requirements). The investigated DAC concept is set to capture 1 Mt/y CO2 with about 75 % carbon capture rate.... [more]

Hydrogen is increasingly recognized as a crucial energy carrier for a low-carbon future. However, most studies on clean hydrogen production devote limited attention to the entire supply chain. This study evaluates the sustainability of 800 combinations of hydrogen production and transportation methods, comparing their environmental impacts against the geophysical limits defined by the Planetary Boundaries framework. Findings reveal that no supply chain alone can make the current economy sustainable, yet powering water electrolysis with bioenergy and carbon capture and storage can meet the CO2-based planetary boundaries. The analysis also underscores the need for decarbonization efforts in the hydrogen transportation sector, as certain options could offset the benefits of clean hydrogen production.