Inspired by Nature, we propose that synergies between biorefinery and mineral refinery can be exploited so that at least a part of the carbon is captured before being released to the atmosphere. In doing so, carbon is captured not only from CO2 but also from biomass and developing more such processes may be the cornerstone for controlling CO2 emissions. A comparison of circular economy in traditional biorefineries and bio-mineral refineries is done by using general chemical formulas and it is shown that the bio-mineral refinery captures carbon. In this work, we have shown that Serpentine may be used to partially neutralise biomass pyrolysis oil. The extracted oil may be used as feedstock to produce downstream chemicals and further studies are required to produce the same.

The oil and gas energy sector uses billions of gallons of water for hydraulic fracturing each year to extract oil and gas. The water injected into the ground for fracturing along with naturally occurring formation water from the oil wells surfaces back in the form of produced water. Produced water can contain high concentrations of total dissolved solids and is unfit for reuse outside the oil and gas industry without desalination. In semi-arid shale plays, produced water desalination for beneficial reuse could play a crucial role in alleviating water shortages and addressing extreme drought conditions. In this paper we co-optimize the design and operation of desalination technologies along with operational decisions across produced water networks. A multi-period produced water network model with simplified split-fraction-based desalination nodes is developed. Rigorous steady-state desalination mathematical models based on mechanical vapor recompression are developed and embedded at the... [more]

Plastic packaging plays a fundamental role in the food industry, avoiding food waste and facilitating food access. The increasing plastic production and the lack of appropriate plastic waste management technologies represent a threat to the environmental and human welfare. Therefore, there is an urgent need to identify sustainable packaging solutions. Circular economy (CE) promotes reducing waste and increasing recycling practices to achieve sustainability. In this work, we propose a CE framework based on multi-objective optimization, considering both economic and environmental impacts, to identify optimal packaging designs and waste management technologies. Using mixed-integer linear programming (MILP), techno-economic analysis (TEA), and life cycle assessment (LCA), this work aims to build the first steps in packaging design, informing about the best packaging alternatives and the optimal technology or technologies to process packaging waste. For the economic analysis, we consider th... [more]

Multilayer plastic films are widely used in packaging applications because of their unique properties. These materials combine several layers of different polymers to protect food and pharmaceuticals from external factors such as oxygen, water, temperature, and light. Unfortunately, this design complexity also hinders the use of traditional recycling methods, such as mechanical recycling. Solvent-based separation processes are a promising alternative to recover high-quality pure polymers from multilayer film waste. One such process is the Solvent-Targeted Recovery and Precipitation (STRAPTM) process, which uses sequential solvent washes to selectively dissolve and separate the constituent components of multilayer films. The STRAPTM process design (separation sequence, solvents, operating conditions) changes significantly depending on the design of the multilayer film (the number of layers and types of polymers). Quantifying the economic and environmental benefits of alternative process... [more]

This paper considers the optimal incorporation of renewable ammonia production facilities into existing supply chain networks which import ammonia from conventional producers while accounting for uncertainty in this conventional ammonia price. We model the supply chain transition problem as a two-stage stochastic optimization problem which is formulated as a Mixed Integer Linear Programming problem. We apply the proposed approach to a case study on Minnesota's ammonia supply chain. We find that accounting for conventional price uncertainty leads to earlier incorporation of in-state renewable production sites in the supply chain network and a reduction in the quantity and cost of conventional ammonia imported over the supply chain transition horizon. These results show that local renewable ammonia production can act as a hedge against the volatility of the conventional ammonia market.

The food-energy-water nexus (FEWN) has been receiving increasing interest in the open literature as a framework to address the widening gap between natural resource availability and demand, towards more sustainable and cost-competitive solutions. The FEWN aims at holistically integrating the three interconnected subsystems of food, energy and water, into a single representative network. However, such an integration poses formidable challenges due to the complexity and multi-scale nature of the three subsystems and their respective interconnections. Additionally, the significant input data uncertainty and variability, such as energy prices and demands, or the evaluation of emerging technologies, contribute to the system’s inherent complexity. In this work, we revisit the FEWN problem in an attempt to elucidate and address in a systematic way issues related to its multi-scale complexity, uncertainty and variability. In particular, we provide a classification of the sources of data and te... [more]

In a world grappling with mounting plastic waste, the pursuit of sustainable plastic waste management has become pivotal in aligning with Circular Economy (CE) goals, with a strong emphasis on resource conservation, product durability, and carbon footprint reduction. The strategic implementation of recycling methods serves as a stepping stone for transitioning from linear to circular models. This work delves into plastic waste recycling technologies, specifically focusing on open and closed-loop approaches, providing a comprehensive evaluation anchored on economic, environmental, and circularity criteria. Different recycling techniques are thoroughly examined, with particular attention given to chemical recycling methods such as pyrolysis and gasification. This work introduces a comprehensive screening model driven by a new proposed circularity metric validated through a case study to assess these recycling pathways. The results reveal the substantial potential of chemical recycling te... [more]

Achieving worldwide sustainable development is a practical challenge that demands an efficient management of resources across their entire value chains. This practical task requires the optimal selection of pathways for extracting, processing, and transporting resources to meet the demands in different geographic regions at minimal economic cost and environmental impact. This work addresses the challenge by proposing a systematic framework for designing resource-processing networks that can be applied to resource management problems. The framework considers the integration and resource exchange within and across multiple processing clusters. It allows for the life cycle assessment of the environmental and economic impacts of the defined value chains, and design accordingly the different processing and transport systems from extraction to final use. The proposed representation and optimization model are demonstrated in a case study to assess the impact of energy transition under decarbo... [more]

Designing a digital twin will be crucial in developing automation-based future manufacturing systems. The design of digital twins involves data-driven modelling of individual manufacturing units and interactions between the various entities. The goals of future manufacturing units such as zero waste at the plant scale can be formulated as a model-based optimal control problem by identifying the necessary state, control inputs, and manipulated variables. The fundamental assumption of any model-based control scheme is the availability of a “reasonable model”, and hence, assessing the goodness of the model in terms of stability and sensitivity around the optimal parameter value becomes imperative. This work analyses the data-driven model of an acetaminophen production plant obtained from SINDy, a nonlinear system identification algorithm using sparse identification techniques. Initially, we linearize the system around optimal parameter values and use local stability analysis to assess the... [more]

Chemical looping Reforming (CLR) is seen as a promising technology for blue hydrogen production. With proper control, CLR in fixed bed reactors has demonstrated the capability to generate blue hydrogen and nitrogen from a single reactor. To enhance efficiency and H2 purity in the product stream, integration of a CLR reactor with a heat recovery system and a Shift reactor is essential. This study explores the design and control of an integrated CLR-Shift reactors system. The integrated system yields a product stream with 75% H2 mole fraction during the Reforming step of CLR, and a nitrogen with high purity (98%) during the Oxidation step. In the best-case scenario, the integrated system produces H2 and N2 at a molar ratio of 1.26 with H2 production efficiency of 80.1%.

This paper introduces a computational framework for selecting green solvents to separate multilayer plastic films, particularly those challenging to recycle through mechanical means. The framework prioritizes the selective dissolution of polymers while considering solvent toxicity. Initial screening relies on temperature-solubility dependence, utilizing octanol-water partition coefficients (LogP) to identify non-toxic solvents (LogP = 3). Additionally, guidelines from GlaxoSmithKline (GSK), Registration, Evaluation, Authorization, and Restriction of Chemical Regulation (REACH), and the US Environmental Protection Agency (EPA) are employed to screen for green solvents. Molecular-scale models predict temperature-dependent solubilities and LogP values for polymers and solvents. The framework is applied to identify green solvents for separating a multilayer plastic film composed of polyethylene (PE), ethylene vinyl alcohol (EVOH), and polyethylene terephthalate (PET). The case study demons... [more]

Biorefineries can reduce carbon dioxide emissions while serving the global chemical demand market. Governments are also using carbon pricing policies, such as carbon taxes, cap-and-trade models, and carbon caps, as a strategy to reduce emissions. The use of biomass feedstocks in conjunction with carbon capture usage and storage technologies are mitigation strategies for global warming. Businesses can invest in these technologies to accommodate the adoption of these policies. Rapid action is necessary to halt global warming, which results in aggressive policies. In this work, a multi-period process design and planning problem is developed for the design and capacity expansion of biorefineries. The three carbon pricing policies are integrated into the model and parameters are selected according to the aggressive scenario denoted by the Paris Agreement. The results show that the cap-and-trade policy achieves a higher net present value evaluation over the carbon tax model across all pareto... [more]

This study investigates the feasibility of valorizing pulp and pulp sludge (PPS) into methane through anaerobic digestion (AD) with a focus on techno-economic analysis (TEA). Three scenarios are evaluated: (A) the base case, (B) sludge AD with alkaline pretreatment using green liquor dregs (GLD), and (C) co-digestion with nitrogen-rich feedstocks. The evaluation is applied to a common PPS, consisting of 70% primary sludge (PS) from the primary clarifier and 30% secondary sludge (SS) from biological treatments from a kraft mill. Theoretical methane potential (TMP) is determined using the Buswell equation. The study highlights the significance of co-digestion with nitrogen-rich feedstocks in enhancing the economic viability of the AD process for PPS, providing valuable insights for sustainable waste management and resource recovery in the pulp and paper industries.

Increases in population and improvements in living standards have significantly increased the demand for animal products worldwide. However, modern livestock agriculture exerts significant pressure on the environment due to high material and energy requirements. These systems also generate significant amounts of waste that can cause severe environmental damage when not handled properly. Thus, if we wish to enable farmers to meet this increased demand in a sustainable way, technology pathways must be developed to convert livestock agriculture into a more circular economy. With this end in mind, we propose a novel framework (which we call ReNuAl) for the recovery of nutrients from livestock waste. ReNuAl integrates existing technologies with a novel biotechnology approach that uses cyanobacteria (CB) as a multi-functional component for nutrient capture and balancing, purifying biogas, and capturing carbon. The CB can be applied to crops, reducing the need for synthetic fertilizers like d... [more]

There is a need to drastically reduce greenhouse gas emissions. While significant progress has been made in electrifying transport, heavy duty transportation and aviation are not likely to be capable of electrification in the near term, spurring significant research into biofuels. When coupled with carbon capture and storage, biofuels can achieve net-negative greenhouse gas emissions via many different conversion technologies such as fermentation, pyrolysis, or gasification to produce ethanol, gasoline, diesel, or jet fuel. However, each pathway has a different efficiency, capital and operating costs, and potential for carbon capture, making the optimal pathway dependent on policy and spatial factors. We use the Integrated Markal-EFOM System model applied to the USA, adding a rich suite of biofuel and carbon capture technologies, region-specific CO2 transportation and injection costs, and government incentives from the Inflation Reduction Act. We find that under current government ince... [more]

Modern mechanical recycling infrastructure for plastic is capable of processing only a small subset of waste plastics, reinforcing the need for parallel disposal methods such as landfilling and incineration. Emerging pyrolysis-based chemical technologies can “upcycle” plastic waste into high-value polymer and chemical products and process a broader range of waste plastics. In this work, we study the economic and environmental benefits of deploying an upcycling infrastructure in the continental United States for producing low-density polyethylene (LDPE) and polypropylene (PP) from post-consumer mixed plastic waste. Our analysis aims to determine the market size that the infrastructure can create, the degree of circularity that it can achieve, the prices for waste and derived products it can propagate, and the environmental benefits of diverting plastic waste from landfill and incineration facilities it can produce. We apply a computational framework that integrates techno-economic analy... [more]

Utilizing sustainable energy sources is crucial for expanding the range of solutions available to meet the growing energy demand and reducing reliance on environmentally damaging and depleting conventional fuels. Biosolids, a type of biomass, are generated as secondary effluent during wastewater treatment process in municipal and industrial sites. These solids possess the potential to serve as a sustainable energy source due to their richness of carbon. For an extended period, biosolids have been landfilled, even though it can be considered a wasteful use of a precious resource and a possible mean for contamination to the food supply chain. This has served as an extra impetus to investigate the potential for harnessing the capabilities of these substances. While many research studies have looked at different ways to put biomass waste to use, very little has been written on biosolids, especially those derived from industrial sources. This research assesses the feasibility of transformin... [more]

Some of the most highly trusted and ubiquitous process simulators have solution methods that are incompatible with algorithms designed for equation-oriented optimization. The natively unconstrained Efficient Global Optimization (EGO) algorithm approximates a black-box simulation with kriging surrogate models to convert the simulation results into a reduced-order model more suitable for optimization. This work evaluates several established constraint-handling approaches for EGO to compare their accuracy, computational efficiency, and reliability using an example simulation of an amine post-combustion carbon capture process. While each approach returned a feasible operating point in the number of iterations provided, none of them effectively converged to a solution, exploring the search space without effectively exploiting promising regions. Using the product of expected improvement and probability of feasibility as next point selection criteria resulted in the best solution value and re... [more]

Critical minerals are essential to the future of clean energy, especially energy storage, electric vehicles, and advanced electronics. In this paper, we argue that process systems engineering (PSE) paradigms provide essential frameworks for enhancing the sustainability and efficiency of critical mineral processing pathways. As a concrete example, we review challenges and opportunities across material-to-infrastructure scales for process intensification (PI) with membranes. Within critical mineral processing, there is a need to reduce environmental impact, especially concerning chemical reagent usage. Feed concentrations and product demand variability require flexible, intensified processes. Further, unique feedstocks require unique processes (i.e., no one-size-fits-all recycling or refining system exists). Membrane materials span a vast design space that allows significant optimization. Therefore, there is a need to rapidly identify the best opportunities for membrane implementation, t... [more]

We study the design and optimization of a multicomponent seawater desalination process with zero liquid discharge (ZLD). The designed process is highly integrated with multiple sub processing units that include humidification-dehumidification, Lithium Bromide absorption chiller, multi-effect evaporators, mechanical vapor compression, and crystallization. Aspen Plus software with E-NRTL and SOLIDS thermodynamic packages are used for modeling and simulation of desalination and crystallization units, respectively. In addition to this, we use data-driven optimization to find the best operating condition (i.e., the temperature of the last effect evaporator) that minimizes the overall energy consumption of the designed plant with an output constraint imposed on the mass fraction of salts going to the ZLD system should be greater than 20 wt.% to achieve the ZLD goal. We use a local sample-based data-driven optimizer, Nonlinear Optimization with the Mesh Adaptive Direct Search (NOMAD) algorith... [more]

To mitigate the effects of catastrophic failure while maintaining resource and production efficiencies, energy systems need to be designed for resilience and sustainability. Conventional approaches such as redundancies through backup processes or inventory stockpiles demand high capital investment and resource allocation. In addition, responding to unexpected “black swan” events requires that systems have the agility to transform and adapt rapidly. To develop targeted solutions that protect the system efficiently, the supply chain network needs to be considered as an integrated multi-scale system incorporating every component from individual process units all the way to the whole network. This approach can be readily integrated with analogous multiscale approaches for sustainability, safety, and intensification. In this work, we bring together classical supply chain resilience with process systems engineering to leverage the multi-scale nature of energy systems for developing resilienc... [more]

Plastics are widely used for their affordability and versatility across many consumer and industrial applications. However, the end-of-life (EoL) management stage can often lead to releasing hazardous chemical additives and degradation products into the environment. The increasing demand for plastics is expected to increase the frequency of material releases throughout the plastic EoL management activities, creating a challenge for policymakers, including ensuring proper material segregation and disposal management and increasing recycling efficiency and material reuse. This research designed a Python-based EoL plastic management tool to support decision-makers in analyzing the holistic impacts of potential plastic waste management policies. The constructed tool was developed to reduce the complexity of material flow analysis calculations, estimating material releases, and environmental impacts. The utility of the tool was tested through the hypothetical nationwide adoption of an exten... [more]

Aiming to mitigate the environmental impact derived from fossil fuels, we propose an integrated carbon capture-biomass gasification process is proposed to produce low-carbon hydrogen as an alternative energy carrier. The process begins with the pre-treatment of empty fruit bunches (EFB), involving grinding, drying, torrefaction, and pelletization. The resulting EFB pellet is then fed into a dual gasifier, followed by a catalytic cracking of tar and water gas shift reaction to produce syngas, aiming to increase its H2 to CO ratio. Subsequently, we explore two alternatives (DEPG and MEA) for syngas upgrading by removing CO2. Finally, a PSA system is modeled to obtain H2 at 99.9% purity. The pre-treatment stage densifies the biomass from an initial composition (%C 46.47, %H 6.22, %O 42.25) to (%C 54.10, %H 6.09, %O 28.67). The dual gasifier operates at 800°C, using steam as a gasifying agent. The resulting syngas has a volume concentration (%CO 20.0, %CO2 28.2, %H2 42.2, %CH4 5.9). Next s... [more]

One of the main challenges to support life in space is the development of sustainable, circular processes that reduce the high cost of resupply missions. Space biomanufacturing is an emerging paradigm that aims to reduce the need for resources, enabling on-demand manufacture of products. The cost of installing biomanufacturing systems in space depends on the cost of transporting the system components, which is directly proportional to their mass/weight. From this perspective, the system mass is a critical factor that dictates process design, and this has important implications in how we can approach such design. For instance, mass constraints require circular use of resources and tight process integration (to minimize resupply) and restricts the type of resources and equipment needed. In this work, we evaluate the lactic acid bioproduction design using Escherichia coli, Saccharomyces cerevisiae, and Pichia pastoris. We use the Equivalent System Mass (ESM) metric as a key design measure... [more]

In this paper, we study the design optimization of methanol production with the goal of minimizing methanol production cost. One challenge of methanol production via carbon dioxide (CO2) hydrogenation is the reduction of operating costs. The simulation of methanol production is implemented within the Aspen HYSYS simulator. The feeds are pure hydrogen and captured CO2. The process simulation involves a single reactor and incorporates recycling at a ratio of 0.995. The methanol production cost is determined using an economic analysis. The cost includes capital and operating costs, which are determined through the equations and data from the capital equipment-costing program. The decision variables are the pressure and temperature of the reactor contents. The optimization problem is solved using a derivative-free algorithm, pyBOUND, a Python-based black-box model optimization algorithm that uses random forests (RFs) and multivariate adaptive regression splines (MARS). The predicted minimu... [more]