Browse
Records Added in April 2023
Records added in April 2023
Change month: January | February | March | April | May | June | July | August | September | October | November | December
8418. LAPSE:2023.27071
How Pro-Environmental Legal Regulations Affect the Design Process and Management of Multi-Family Residential Buildings in Poland
April 3, 2023 (v1)
Subject: Energy Policy
Keywords: architecture, design, Energy Efficiency, energy performance of buildings, energy policy, management, multi-family buildings
This article addresses issues related to the quality of design and subsequent management of multi-family residential buildings in the context of their energy supply. The framework of the analysis carried out here are pro-environmental legal regulations currently in force in Poland. This article describes the impact of these regulations on the design process and the role of the designer. The requirements have been defined and the constraints have been identified. A number of factors directly related to the nature and parameters of the designed buildings and their location have been taken into consideration. On the basis of this study, the impact of legal regulations both on the method of energy supply in the buildings and on their later use and management have been presented. Positive and negative aspects of the analyzed regulations have been indicated and directions for their evaluation and optimization have been proposed. The research was carried out using real buildings, both complet... [more]
8419. LAPSE:2023.27070
Time-Frequency Image Analysis and Transfer Learning for Capacity Prediction of Lithium-Ion Batteries
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: capacity prediction, continuous wavelet transform (CWT), lithium-ion battery, state of health estimation, time–frequency image analysis
Energy storage is recognized as a key technology for enabling the transition to a low-carbon, sustainable future. Energy storage requires careful management, and capacity prediction of a lithium-ion battery (LIB) is an essential indicator in a battery management system for Electric Vehicles and Electricity Grid Management. However, present techniques for capacity prediction rely mainly on the quality of the features extracted from measured signals under strict operating conditions. To improve flexibility and accuracy, this paper introduces a new paradigm based on a multi-domain features time-frequency image (TFI) analysis and transfer deep learning algorithm, in order to extract diagnostic characteristics on the degradation inside the LIB. Continuous wavelet transform (CWT) is used to transfer the one-dimensional (1D) terminal voltage signals of the battery into 2D images (i.e., wavelet energy concentration). The generated TFIs are fed into the 2D deep learning algorithms to extract th... [more]
8420. LAPSE:2023.27069
Comparison between Inflexible and Flexible Charging of Electric Vehicles—A Study from the Perspective of an Aggregator
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: battery degradation, electric vehicles, electric vehicles aggregator, electricity markets, stochastic programming
This paper is about the problem of the management of an aggregator of electric vehicles participating in an electricity market environment. The problem consists in the maximization of the expected profit through a formulation given by a stochastic programming problem to consider the uncertainty faced by the aggregator. This uncertainty is due to the day-ahead market prices and the driving requirements of the owners of the vehicles. Depending on the consent of the owners, inflexible charging to flexible charging is considered. Thus, the aggregator can propose different profiles and charging periods to the owners of electric vehicles. Qualitatively, as expected, the more flexible the vehicle owners, the higher the expected profit. The formulation, however, offers more to the aggregator and provides the ability to quantify the influence of consent of favorable driving requirements in the expected profit, allowing the aggregator to consider rewarding the owners of vehicles with more flexib... [more]
8421. LAPSE:2023.27068
Enhancement of Hosting Capacity with Soft Open Points and Distribution System Reconfiguration: Multi-Objective Bilevel Stochastic Optimization
April 3, 2023 (v1)
Subject: Energy Management
Keywords: active distribution networks, distributed generation, distribution system reconfiguration, hosting capacity maximization, multi-objective bilevel optimization, soft open points, TOPSIS
Soft open points (SOPs) are power electronic devices that replace the normal open points in active distribution systems. They provide resiliency in terms of transferring electrical power between adjacent feeders and delivering the benefits of meshed networks. In this work, a multi-objective bilevel optimization problem is formulated to maximize the hosting capacity (HC) of a real 59-node distribution system in Egypt and an 83-node distribution system in Taiwan, using distribution system reconfiguration (DSR) and SOP placement. Furthermore, the uncertainty in the load is considered to step on the real benefits of allocating SOPs along with DSR. The obtained results validate the effectiveness of DSR and SOP allocation in maximizing the HC of the studied distribution systems with low cost.
8422. LAPSE:2023.27067
Explicit Multipole Formula for the Local Thermal Resistance in an Energy Pile—The Line-Source Approximation
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: energy piles, ground source heat pump (GSHP), local thermal resistance, minimum thermal resistance, multipole method, pile foundations, thermal piles
This paper presents a closed-form quite handy formula for the local thermal resistance Rb between the temperature of the bulk heat-carrier fluid in the pipes, equally spaced on a concentric circle inside a circular energy pile, and the mean temperature at the periphery of the pile. The so-called multipole method is used to calculate the temperature field. An important improvement of the multipole method is presented, where Cauchy’s mean value theorem of analytical functions is used. The formula for thermal resistance Rb0 for the zero-order approximation (J = 0), where only line heat sources at the pipes are used, is presented. The errors using zeroth-order approximation (J = 0) are shown to be quite small by comparisons with eight-order approximation (J = 8) with its accuracy of more than eight digits. The relative error for the local thermal resistance Rb0 for the zero-order approximation (J = 0) lies below 5% for a wide range of input parameter values. These ranges are judged to cove... [more]
8423. LAPSE:2023.27066
Partial Discharge Detection Based on Anomaly Pattern Detection
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: anomaly pattern detection, Machine Learning, partial discharge detection, phase resolved partial discharge analysis (PRPDA)
Recently, a lot of research has been carried out on partial discharge (PD) using machine learning techniques. However, most of these studies have focused on the identification of multiple PD sources, PD classification, or denoising PD measurements, with few studies on real-time PD occurrence detection. In this paper, we propose a method to detect PD occurrence based on anomaly pattern detection. The proposed method consists of three steps. First, in the data preprocessing step, the pulse sequence data are converted into a feature vector stream by applying a sliding window technique. In the next step, normal data modeling is performed using feature vectors transformed from pulse sequence data collected in a normal state where no PD occurs. Finally, for the monitored pulse sequence, an online process for PD detection is carried out through conversion to a feature vector data stream and an anomaly pattern detection method. Experimental results using simulated PD data demonstrate the capab... [more]
8424. LAPSE:2023.27065
Demand-Based Control Design for Efficient Heat Pump Operation of Electric Vehicles
April 3, 2023 (v1)
Subject: Process Control
Keywords: demand-based control, efficiency, heat pump, modelling and simulation, operating strategy
Thermal management systems of passenger vehicles are fundamental to provide adequate cabin thermal comfort. However, for battery electric vehicles they can use a significant amount of battery energy and thus reduce the real driving range. Indeed, when heating or cooling the vehicle cabin the thermal management system can consume up to 84% of the battery capacity. This study proposes a model-based approach to design an energy-efficient control strategy for heating electric vehicles, considering the entire climate control system at different ambient conditions. Specifically, the study aims at reducing the energy demand of the compressor and water pumps when operating in heat pump mode. At this scope, the climate control system of the reference vehicle is modelled and validated, enabling a system efficiency analysis in different operating points. Based on the system performance assessment, the optimized operating strategy for the compressor and the water pumps is elaborated and the result... [more]
8425. LAPSE:2023.27064
Influence of Graphene Oxide on Rheological Parameters of Cement Slurries
April 3, 2023 (v1)
Subject: Materials
Keywords: advanced drilling solution, cement slurry, graphene, graphene oxide (GO), nanotubes, plastic viscosity, rheological parameters, structural strength, yield strength
In recent years, graphene-based nanomaterials have been increasingly and widely used in numerous industrial sectors. In the drilling industry, graphene oxide in cement slurry has significantly improved the mechanical parameters of cement composites and is a future-proof solution. However, prior to placing it in a borehole ring space, cement slurry must feature appropriate fluidity. Graphene oxide has a significant influence on rheological parameters. Therefore, it is necessary to study graphene oxide’s influence on the rheological parameters of cement slurries. Thus, this paper presents rheological models and the results of studies on rheological parameters. A basic cement slurry and a slurry with a latex addition were used. The latex admixture was applied at concentrations of 0.1%, 0.03%, and 0.06%. In total, studies were carried out for six slurries with graphene oxide and two basic slurries. The obtained results of studies on the slurries with graphene oxide were compared with the c... [more]
8426. LAPSE:2023.27063
Differential Equation Model of the LLC Resonant Converter in the Ideal Case
April 3, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: differential equation model, ideal case, initial value, LLC resonant converter, numerical solution
The LLC resonant converter has been widely used in direct current (DC) power supply applications. However, fundamental harmonic approximation or other simplified analyses will introduce inevitable deviations. Therefore, the differential equation model with numerical solution of the LLC converter is proposed in this paper based on the operational principle of the ideal case. In order to solve the differential equation, initial values need to be substituted. The accurate LLC model based on time interval analysis is very complicated and cannot be used. In this paper, solution methods of the initial values corresponding to different switching frequencies are proposed. The initial values can be solved conveniently. Furthermore, the voltage gain curve is modified by the idealized analysis. Lastly, all the above research is verified by PSIM simulation. The work is helpful to understand the operational principle of the LLC resonant converter.
8427. LAPSE:2023.27062
Advancements in Catalytic Conversion of Biomass into Biofuels and Chemicals
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: Biomass, catalysts, solvents
The shortage of resources and increasing climate changes have brought the need for sustainable and renewable resources to people’s attention. Biomass is an earth-abundant material and has great potential as a feedstock for alternative fuels and chemicals. For the effective utilization of biomass, this biopolymer has to be depolymerized and transformed into key building blocks and/or the targeted products, and biological or chemical catalysts are commonly used for the rapid and energy-efficient reactions. This Special Issue introduces recent advances in the catalytic conversion of biomass into biofuels and value-added products.
8428. LAPSE:2023.27061
Longitudinal Modelling and Control of In-Wheel-Motor Electric Vehicles as Multi-Agent Systems
April 3, 2023 (v1)
Subject: Process Control
Keywords: anti-slip, electric vehicle, in-wheel-motor, motion control, multi-agent-system, slip-ratio
This paper deals with longitudinal motion control of electric vehicles (EVs) driven by in-wheel-motors (IWMs). It shows that the IWM-EV is fundamentally a multi-agent system with physical interaction. Three ways to model the IWM-EV are proposed, and each is applicable to certain control objectives. Firstly, a nonlinear model with hierarchical structure is established, and it can be used for passivity-based motion control. Secondly, a linearized model with rank-1 interconnection matrix is presented for stability analysis. Thirdly, a time-varying state-space model is proposed for optimal control using linear quadratic regulator (LQR). The proposed modellings contribute the new understanding of IWM-EV dynamics from the view point of multi-agent-system theory. By choosing the suitable control theory for each model, the complexity level of system design is maintained constant, no matter what the number of IWMs installed to the vehicle body. The effectiveness of three models and their design... [more]
8429. LAPSE:2023.27060
Suction Removal of Cohesionless Sediment
April 3, 2023 (v1)
Subject: Food & Agricultural Processes
Keywords: cohesionless sediment scour, hydraulic suction, scour depth
The theoretical analysis of sediment scour in vertical direction caused by a vertical suction inlet is presented here. The predictive formulas of the critical inlet height of particle initial motion and scour depth in equilibrium state are expressed as Froude type relations based on the phenomenological theory of turbulence and the momentum transfer hypothesis between fluid and grain. The experimental data of the literature shows good consistency with the theoretical relationship, and the physical mechanism is clear. In addition, the discussion for the applicability of the predictive formula in an extensive range of Reynolds numbers reveals that the sediment incipient motion can be excellently explained by the energy spectrum of the phenomenological theory. Then the theoretical errors in different flow regions are investigated. The research presents universal relevance and reference value for similar research and application.
8430. LAPSE:2023.27059
Model Predictive Control for Virtual Synchronous Generator with Improved Vector Selection and Reconstructed Current
April 3, 2023 (v1)
Subject: Process Control
Keywords: current reconstruction, Model Predictive Control, virtual synchronous generator, voltage vector
Due to the large-scale renewable energy connected to the power grid by power electronic converters, the inertia and stability of the power grid is declining. In order to improve the inertia and support the grid recovery, the three-phase converter works as a virtual synchronous generator (VSG) to respond to the frequency and voltage changes of the power grid. This paper proposes a model predictive control for the virtual synchronous generator (MPC-VSG) strategy, which can automatically control the converter output power with the grid frequency and voltage changes. Further consideration of fault-tolerant ability and reliability, the method based on improved voltage vector selection, and reconstructed current is used for MPC-VSG to ensure continuous operation for three-phase converters that have current-sensor faults, and improve the reconstruction precision. The proposed method can respond to the frequency and voltage changes of the power grid and has fault-tolerant ability, which is eas... [more]
8431. LAPSE:2023.27058
Standardized Comparison of 40 Local Driving Cycles: Energy and Kinematics
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: average speed, characteristic parameters, driving cycles, energy consumption, fuel economy
Local driving cycles (LDCs) capture local traffic characteristics, while standard driving cycles (SDCs) compare vehicles in distinct regions. There is a plethora of LDCs, raising the question as to how distinct they are. To quantify it, we first organized a collection of 77 LDCs. From the speed—time images, it was possible to extract numerical vectors of 40 cycles in a standardized way. Comparing the LDCs developed for cars, we found that their parameters fluctuate significantly: the average speed varies from 14.7 to 44.7 km/h, and the fuel economy varies from 10.8 to 20.5 km/L. Comparing the LDCs with FTP-75 cycle, the difference in speed is 7 km/h, and in fuel economy is 1.5 km/L. For WLTC, the difference is 19.4 km/h and 3 km/L, respectively. Thus, given the deviations found between the analyzed LDCs, and between LDCs and SDCs, the numerical results reinforce the relevance of using LDCs for each region.
8432. LAPSE:2023.27057
Assessment of Greenhouse Gases and Pollutant Emissions in the Road Freight Transport Sector: A Case Study for São Paulo State, Brazil
April 3, 2023 (v1)
Subject: Environment
Keywords: Brazil, greenhouse gases emissions, Low Emissions Analysis Platform (LEAP), pollutant emissions, road freight transport
This study analyzes the road freight sector of São Paulo state to identify the best options to reduce greenhouse gases emissions and local pollutants, such as particulate matter, nitrogen oxides, carbon monoxide, and hydrocarbons. Additionally, the investment cost of each vehicle is also analyzed. Results show that electric options, including hybrid, battery, and hydrogen fuel-cell electric vehicles represent the best options to reduce pollutants and greenhouse gases emissions concomitantly, but considerable barriers for their deployment are still in place. With little long-term planning on the state level, electrification of the transport system, in combination with increased renewable electricity generation, would require considerable financial support to achieve the desired emissions reductions without increasing energy insecurity.
8433. LAPSE:2023.27056
Experimental Investigation and Mechanism Analysis on Rock Damage by High Voltage Spark Discharge in Water: Effect of Electrical Conductivity
April 3, 2023 (v1)
Subject: Materials
Keywords: drilling, electrical conductivity, electrohydraulic effect, high voltage spark discharge, pressure waves, rock damage
High voltage spark discharge (HVSD) could generate strong pressure waves that can be combined with a rotary drill bit to improve the penetration rate in unconventional oil and gas drilling. However, there has been little investigation of the effect of electrical conductivity on rock damage and the fragmentation mechanism caused by HVSD. Therefore, we conducted experiments to destroy cement mortar, a rock-like material, in water with five conductivity levels, from 0.5 mS/cm to 20 mS/cm. We measured the discharge parameters, such as breakdown voltage, breakdown delay time, and electrical energy loss, and investigated the damage mechanism from stress waves propagation using X-ray computed tomography. Our study then analyzed the influence of conductivity on the surface damage of the sample by the pore size distribution and the cumulative pore area, as well as studied the dependence of internal damage on conductivity by through-transmission ultrasonic inspection technique. The results indic... [more]
8434. LAPSE:2023.27055
Test Grids for the Integration of RES—A Contribution for the European Context
April 3, 2023 (v1)
Subject: Energy Policy
Keywords: distributions grids, test networks, transmission grids, voltage levels
A long-term sustainable energy transition can only be achieved by technological advancements and new approaches for efficiently integrating renewable energies into the overall energy system. Significantly increasing the share of renewable energy sources (RES) within the overall energy system requires appropriate network models of current transmission and distribution grids, which, as limiting factors of energy infrastructures, confine this share due to capacity constraints. However, especially regarding electrical network models, data (e.g., geographical data, load and generation profiles, etc.) is rarely available since it usually includes user-specific information and is, therefore, subject to data protection. Synthetically obtained electrical networks, on the other hand, may not be representative and may fail to replicate real grid structures due to the heterogeneous properties of currently operated networks. To account for this heterogeneity, this paper offers a contribution for th... [more]
8435. LAPSE:2023.27054
Voltage Reduction in Medium Voltage Distribution Systems Using Constant Power Factor Control of PV PCS
April 3, 2023 (v1)
Subject: Process Control
Keywords: distributed power generation, photovoltaic systems, power distribution, power quality, power system analysis computing, power system measurements, reactive power, reverse power flow, voltage fluctuations, voltage regulation
Reverse power flow from a photovoltaic (PV) system in a distribution system causes a voltage rise. A relative study regarding the reduction in the distribution feeder voltage depending on system conditions and the magnitude of reverse power flow has been conducted. Several methods for mitigating voltage rise have been proposed; however, the influence of these methods on the voltage in the distribution system, where the voltage is reduced due to reverse power flow, remains to be determined. In this study, the effect of constant power factor control in low-voltage PV systems, which are widely used as voltage rise countermeasures in distribution systems, was analyzed under the condition that the distribution line voltage decreases due to reverse power flow. Consequently, the constant power factor control of the low-voltage distribution system was found to adversely reduce voltage in the medium voltage distribution system due to the consumption of lagging reactive power by the PV systems.
8436. LAPSE:2023.27053
Machine Learning-Based Management of Electric Vehicles Charging: Towards Highly-Dispersed Fast Chargers
April 3, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: coordinated electric vehicles charging, cyber-physical systems (CPSs), Decision Tree (DT), Deep Neural Network (DNN), electric vehicles charging stations (EVCS), K-Nearest Neighbors (KNN), Long Short-Term Memory (LSTM), machine learning (ML), Naïve Bayes (NB), power rating (PR), Random Forest (RF), Recurrent Neural Networks (RNN), smart grid, Support Vector Machine (SVM)
Coordinated charging of electric vehicles (EVs) improves the overall efficiency of the power grid as it avoids distribution system overloads, increases power quality, and decreases voltage fluctuations. Moreover, the coordinated charging supports flattening the load profile. Therefore, an effective coordination technique is crucial for the protection of the distribution grid and its components. The substantial power used through charging EVs has undeniable negative impacts on the power grid. Additionally, with the increasing use of EVs, an effective solution for the coordination of EVs charging, particularly when considering the anticipated proliferation of EV fast chargers, is imminently required. In this paper, different machine learning (ML) approaches are compared for the coordination of EVs charging. The ML models can predict the power to be used in EVs charging stations (EVCS). Due to its ability to use historical data to learn and identify patterns for making future decisions wi... [more]
8437. LAPSE:2023.27052
Review of Formation and Gas Characteristics in Shale Gas Reservoirs
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: gas viscosity, geology, Gibbs excess adsorption, shale gas reservoir, supercritical adsorption
An accurate understanding of formation and gas properties is crucial to the efficient development of shale gas resources. As one kind of unconventional energy, shale gas shows significant differences from conventional energy ones in terms of gas accumulation processes, pore structure characteristics, gas storage forms, physical parameters, and reservoir production modes. Traditional experimental techniques could not satisfy the need to capture the microscopic characteristics of pores and throats in shale plays. In this review, the uniqueness of shale gas reservoirs is elaborated from the perspective of: (1) geological and pore structural characteristics, (2) adsorption/desorption laws, and (3) differences in properties between the adsorbed gas and free gas. As to the first aspect, the mineral composition and organic geochemical characteristics of shale samples from the Longmaxi Formation, Sichuan Basin, China were measured and analyzed based on the experimental results. Principles of d... [more]
8438. LAPSE:2023.27051
Study of the Effects of Changes in Gas Composition as Well as Ambient and Gas Temperature on Errors of Indications of Thermal Gas Meters
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: adding hydrogen to the natural gas network, diaphragm gas meters, gas measurement, measurement accuracy, P2G, Power to Gas, smart meters, thermal gas meters
Thermal gas meters represent a promising technology for billing customers for gaseous fuels, however, it is essential to ensure that measurement accuracy is maintained in the long term and in a broad range of operating conditions. The effect of hydrogen addition to natural gas will change the physicochemical properties of the mixture of natural gas and hydrogen. Such a mixture will be supplied through the gas system, to consumers, including households, where the amounts of received gas will be metered. The physicochemical properties of hydrogen, including the specific density or viscosity, differ significantly from those of the natural gas components, such as methane, ethane, propane, nitrogen, etc. Therefore, it is of utmost importance to establish the impact of the changes in the gas composition caused by the addition of hydrogen to natural gas on the metrological properties of household gas meters, including thermal gas meters. Furthermore, since household gas meters can be installe... [more]
8439. LAPSE:2023.27050
Equivalent Modeling of Dfig-Based Wind Farms for Sub-Synchronous Resonance Analysis
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: DFIG wind farm, equivalent model, similarity transformation, SSR
The order of the detailed model of doubly-fed induction generator (DFIG) wind farms are too high and the simulation is difficult. Most of the existing research has used a single-machine equivalent model and clustering aggregation model for equivalence and few papers have explored the principles and equivalent conditions of the single-machine equivalent model under sub-synchronous resonance (SSR). Due to this reason, this paper equates DFIG wind farms connected with series compensated transmission network to two separate units based on the principle of matrix similarity transformation and the mathematical model and physical model of each unit has been studied. Then, the DFIG wind farm equivalent model’s validity is analyzed in number difference and collecting line difference based on linearization analysis. Finally, the system model is built in EMTDC/PSCAD, the damping analysis method is used to test the equivalent model’s validity and further reveal the mechanism of the system’s unstab... [more]
8440. LAPSE:2023.27049
Physical Experiment and Numerical Modeling on the Failure Mechanism of Gob-Side Entry Driven in Thick Coal Seam
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: crack evolution, failure mechanism, gob-side entry, numerical modeling, physical experiment
In this paper, a combination of physical model tests and numerical simulations were carried out to explore the overlying strata movement laws, failure mechanism, and cracks evolution of the gob-side entry driven in a thick coal seam. The physical experimental results indicated that the hanging cantilever beam was easily developed above the coal pillar after mining out the 2101 panel, resulting in a larger and stronger stress concentration. The overburden loads acting on the coal pillar can be greatly released after the hanging roof strata were cut down with an 18 m cutting line. Additionally, we adopted Universal Discrete Element Code (UDEC) software to investigate the deformation and crack evolution mechanism of the gob-side entry under different conditions. The primary-supported roadway underwent severe deformation, filling with a great quantity of tensile and shear cracks to the inner coal pillar. Both the physical and numerical results proved that the optimized-support parameters c... [more]
8441. LAPSE:2023.27048
A Comparative Analysis of Neutron Transport Calculations Based on Variational Formulation and Finite Element Approaches
April 3, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: comprehensive comparative analysis, conjoint variational principle, continuous finite element, discontinuous finite element, neutron transport equation, spatially adaptive approach
The application of continuous and discontinuous approaches of the finite element method (FEM) to the neutron transport equation (NTE) has been investigated. A comparative algorithm for analyzing the capability of various types of numerical solutions to the NTE based on variational formulation and discontinuous finite element method (DFEM) has been developed. The developed module is coupled to the program discontinuous finite element method for neutron (DISFENT). Each variational principle (VP) is applied to an example with drastic changes in the distribution of neutron flux density, and the obtained results of the continuous and discontinuous finite element (DFE) have been compared. The comparison between the level of accuracy of each approach using new module of DISFENT program has been performed based on the fine mesh solutions of the multi-PN (MPN) approximation. The obtained results of conjoint principles (CPs) have been demonstrated to be very accurate in comparison to other VPs.... [more]
8442. LAPSE:2023.27047
Numerical Simulation and Experimental Investigation of Temperature and Residual Stress Distributions in a Circular Patch Welded Structure
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: buried-arc welding, infrared camera, MAG welding, patch weld, repair welding, thermocouples, welding residual stresses
In this study, we performed a numerical simulation and experimental measurements on a steel circular patch welded structure to investigate the temperature and residual stress field distributions caused by the application of buried-arc welding technology. The temperature histories during the welding and subsequent cooling process were recorded for two locations, with the thermocouples mounted inside the plate close to the weld bead. On the upper surface of the welded model, the temperature-time changes during the cooling process were monitored using an infrared camera. The numerically calculated temperature values correlated well with the experimentally measured ones, while the maximum deviation of the measured and calculated temperatures was within 9%. Based on the numerical result analysis regarding circumferential and radial stresses after the completion of the welding process, it is concluded that both stresses are primarily tensile within the circular disk. Outside the disk, the ci... [more]
[0.08 s]

