Browse
Records Added in April 2023
Records added in April 2023
Change year: 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | 2026
Change month: January | February | March | April | May | June | July | August | September | October | November | December
Showing records 8493 to 8517 of 9292. [First] Page: 1 337 338 339 340 341 342 343 344 345 Last
Cold Ironing Galvanic Corrosion Issues with Regard to a Shore-to-Ship Medium Voltage Connection
Maciej Kozak, Jarosław Chmiel
April 3, 2023 (v1)
Keywords: capacity, cold ironing, electrochemical corrosion, harbor maintenance management, medium voltage connection
Cold ironing refers to the usage of less polluting power supply sources to deliver electricity to the moored ship. Such a shore-to-ship system is used when the ship is at a port so the auxiliary combustion engines may be turned off. This paper presents the numerical simulation results of a medium voltage cold-ironing system with regard to the currents flowing between the ship’s hull and grounding busbar. The IT electrical inland system with a neutral grounding resistor, as commonly used in shore-to-ship systems, is investigated. Parasitic capacitances present between the phase-to-hull and phase-to-ground in real-world applications can vary from each other. The direct and alternating currents flowing across the hull, seawater and the pier structure are amongst the causes that can lead to premature reinforced concrete degradation. Chosen cases of phase-to-ground or hull unequal capacitances influencing AC stray currents were considered.
A Dataset for Non-Intrusive Load Monitoring: Design and Implementation
Douglas Paulo Bertrand Renaux, Fabiana Pottker, Hellen Cristina Ancelmo, André Eugenio Lazzaretti, Carlos Raiumundo Erig Lima, Robson Ribeiro Linhares, Elder Oroski, Lucas da Silva Nolasco, Lucas Tokarski Lima, Bruna Machado Mulinari, José Reinaldo Lopes da Silva, Júlio Shigeaki Omori, Rodrigo Braun dos Santos
April 3, 2023 (v1)
Keywords: electric load simulation, NILM datasets, Non-Intrusive Load Monitoring (NILM), power signature
A NILM dataset is a valuable tool in the development of Non-Intrusive Load Monitoring techniques, as it provides a means of evaluation of novel techniques and algorithms, as well as for benchmarking. The figure of merit of a NILM dataset includes characteristics such as the sampling frequency of the voltage, current, or power, the availability of indications (ground-truth) of load events during recording, the variety and representativeness of the loads, and the variety of situations these loads are subject to. Considering such aspects, the proposed LIT-Dataset was designed, populated, evaluated, and made publicly available to support NILM development. Among the distinct features of the LIT-Dataset is the labeling of the load events at sample level resolution and with an accuracy and precision better than 5 ms. The availability of such precise timing information, which also includes the identification of the load and the sort of power event, is an essential requirement both for the eval... [more]
Investigation of the K-Mg-Ca Sulfate System as Part of Monitoring Problematic Phase Formations in Renewable-Energy Power Plants
Fiseha Tesfaye, Daniel Lindberg, Mykola Moroz, Leena Hupa
April 3, 2023 (v1)
Keywords: high-temperature processes, slagging and fouling management, sulfates, superheater tubes, thermodynamic modeling
Besides the widely applied hydropower, wind farms and solar energy, biomass and municipal and industrial waste are increasingly becoming important sources of renewable energy. Nevertheless, fouling, slagging and corrosion associated with the combustion processes of these renewable sources are costly and threaten the long-term operation of power plants. During a high-temperature biomass combustion, alkali metals in the biomass fuel and the ash fusion behavior are the two major contributors to slagging. Ash deposits on superheater tubes that reduce thermal efficiency are often composed of complex combinations of sulfates and chlorides of Ca, Mg, Na, and K. However, thermodynamic databases involving all the sulfates and chlorides that would favor a better understanding and control of the problems in combustion processes related to fouling, slagging and corrosion are not complete. In the present work, thermodynamic properties including solubility limits of some phases and phase mixtures in... [more]
A Novel Data-Driven Method to Estimate Methane Adsorption Isotherm on Coals Using the Gradient Boosting Decision Tree: A Case Study in the Qinshui Basin, China
Jiyuan Zhang, Qihong Feng, Xianmin Zhang, Qiujia Hu, Jiaosheng Yang, Ning Wang
April 3, 2023 (v1)
Keywords: coal properties, estimation model, gradient boosting decision tree, Machine Learning, methane adsorption isotherm
The accurate determination of methane adsorption isotherms in coals is crucial for both the evaluation of underground coalbed methane (CBM) reserves and design of development strategies for enhancing CBM recovery. However, the experimental measurement of high-pressure methane adsorption isotherms is extremely tedious and time-consuming. This paper proposed the use of an ensemble machine learning (ML) method, namely the gradient boosting decision tree (GBDT), in order to accurately estimate methane adsorption isotherms based on coal properties in the Qinshui basin, China. The GBDT method was trained to correlate the adsorption amount with coal properties (ash, fixed carbon, moisture, vitrinite, and vitrinite reflectance) and experimental conditions (pressure, equilibrium moisture, and temperature). The results show that the estimated adsorption amounts agree well with the experimental ones, which prove the accuracy and robustness of the GBDT method. A comparison of the GBDT with two com... [more]
Smart Meter Measurement-Based State Estimation for Monitoring of Low-Voltage Distribution Grids
Karthikeyan Nainar, Florin Iov
April 3, 2023 (v1)
Keywords: distribution system state estimation, grid observability, sensitivity analysis, smart meters, weighted least squares method
The installation of smart meters at customer premises provides opportunities for the monitoring of distribution grids. This paper addresses the problem of improving the observability of low-voltage distribution grids using smart metering infrastructure. In particular, this paper deals with the application of state estimation algorithm using smart meter measurements for near-real-time monitoring of low-voltage distribution grids. This application is proposed to use a nonlinear weighted least squares method-based algorithm for estimating the node voltages from minimum number of smart meter measurements. This paper mainly deals with sensitivity analysis of the state estimation algorithm with respect to multiple uncertainties for, e.g., measurements errors, line parameter errors, and pseudo-measurements. Simulation studies are conducted to estimate the accuracy of the DSSE under various operating scenarios of a real-life low-voltage grid, and cost-effective ways to improve the accuracy of... [more]
Hydroelectric Operation Optimization and Unexpected Spillage Indications
Ramon Abritta, Frederico Panoeiro, Leonardo Honório, Ivo Silva Junior, André Marcato, Anapaula Guimarães
April 3, 2023 (v1)
Keywords: hydroelectric power plants, Julia language, Optimization, short-term scheduling, spillage
It is widely known that hydroelectric power plants benefit from optimized operation schedules, since the latter prevent water and, therefore, monetary wastes, contributing to significant environmental and economic gains. The level of detail on the representation of such systems is related to how far ahead the planning horizon is extended. Aiming at the very short-term optimization of hydroelectric power plants, which usually requires the most detailed models, this paper addresses an undesired effect that, despite being already mentioned in the literature, has not been properly explored and explained yet. This effect is given by the indication of spillage by the optimizer, even when the reservoir does not reach its maximum capacity. Simulations implemented in Julia language using real power plant data expose this phenomenon. Possible ways to circumvent it are presented. Results showed that, in specific cases, spillage allows the achieving of more efficient operating points by reducing t... [more]
A Feasibility Study of Frequency Regulation Energy Storage System Installation in a Power Plant
Lateef Onaadepo Ibrahim, Youl-Moon Sung, Doosoo Hyun, Minhan Yoon
April 3, 2023 (v1)
Keywords: ESS, ESS location, ESS operation, ETAP, load flow, relay coordination, short circuit
The aim of this work is to analyze and stabilize the power system when connecting an energy storage system (ESS) to replace the traditional power reserve of a power plant. Thus, it is necessary to validate and simulate the power facility protection system using a relay coordination approach. The input feasibility of the generator for the frequency regulation (FR) of the operational ESS is also validated through detailed analysis studies including power flow, short circuit and relay coordination analysis. The case scenarios for ESS installation are categorized based on its operation mode and location in the power system. These studies are carried out on the power system at the peak load condition specified for both grids. With the electrical transient analyzer program (ETAP), an analysis is performed to study the implementation of the ESS in a large, integrated power system to determine which location best fits the installation of ESS considering the load flow, short circuit and relay c... [more]
Multi-Criteria Optimal Sizing and Allocation of Renewable and Non-Renewable Distributed Generation Resources at 63 kV/20 kV Substations
Seyed Siavash Karimi Madahi, Andrija T. Sarić
April 3, 2023 (v1)
Subject: Optimization
Keywords: allocation, distributed generation, multi-criteria, Optimization, sizing
The optimal allocation and sizing of distributed generation (DG) resources are important in installing these resources, to improve the technical parameters of the network, including the power losses, voltage profile, and short-circuit level, as well as to increase economic factors. In this paper, a new multi-criteria algorithm and objective function are proposed for the optimal sizing and allocation of renewable and non-renewable DG resources simultaneously. The proposed algorithm is implemented on 63/20 kV substations at 20 kV levels. In the proposed objective function, all important technical and economic factors as well as important constraints, such as penetration level of DGs and budget constraint, are considered in a way that all factors are assigned to monetary values. Moreover, a new mathematical formulation is introduced for the allocation of renewable DG resources to reduce run-time optimization. The genetic algorithm (GA) is employed in the proposed algorithm to minimize the... [more]
CBS 141442: A Novel Glucose/Xylose Co-Fermenting Isolate for Lignocellulosic Bioethanol Production
Antonio D. Moreno, Elia Tomás-Pejó, Lisbeth Olsson, Cecilia Geijer
April 3, 2023 (v1)
Keywords: Biofuels, cell factory, simultaneous saccharification and fermentation, yeast morphology, yeast robustness
The present study describes the isolation of the novel strain Candida intermedia CBS 141442 and investigates the potential of this microorganism for the conversion of lignocellulosic streams. Different C. intermedia clones were isolated during an adaptive laboratory evolution experiment under the selection pressure of lignocellulosic hydrolysate and in strong competition with industrial, xylose-fermenting Saccharomyces cerevisiae cells. Isolates showed different but stable colony and cell morphologies when growing in a solid agar medium (smooth, intermediate and complex morphology) and liquid medium (unicellular, aggregates and pseudohyphal morphology). Clones of the same morphology showed similar fermentation patterns, and the C. intermedia clone I5 (CBS 141442) was selected for further testing due to its superior capacity for xylose consumption (90% of the initial xylose concentration within 72 h) and the highest ethanol yields (0.25 ± 0.02 g ethanol/g sugars consumed). Compared to t... [more]
The Prospects for Processing Reservoir Oil Sludge into Hydrocarbons by Low-Temperature Hydrogenation in Sorbing Electrochemical Matrices in Comparison with Conventional High-Temperature Hydrocracking
Anton Maximov, Aslan Tsivadze, Alexander Fridman, Tatyana Kuchinskaya, Alexander Novikov, Maxim Shabanov, Evgeny Naranov
April 3, 2023 (v1)
Subject: Materials
Keywords: detergent, hydrokracking, low-temperature hydrogenation, oil sludge, water–oil emulsions
In this paper, we developed an effective method for purifying oil sludge using a sorbing electrochemical matrix and assessed the prospects of this method in comparison with conventional hydrocracking. We synthesized Ni-W supported hydrocracking catalysts with different morphology and studied their activity under various conditions, we compared the obtained catalysts with commercial catalyst SGK-5. We demonstrated that the introduction of a secondary mesoporous structure in the catalyst leads to an increase in the yield of light fractions to 52 wt.%. The possibility is demonstrated to obtain hydrocarbons from reservoir oil sludge, dispersed into an aqueous solution of detergent, by the method of low-temperature hydrogenation in sorbing electrochemical matrices. The obtained product was characterized by low viscosity, low content of transition metals (<320 ppm), and sulphur (<260 ppm).
Method for Determining the Probability of a Lack of Water Supply to Consumers
Dawid Szpak
April 3, 2023 (v1)
Subject: Materials
Keywords: Bayes’ theorem, failures, lack of water, reliability, water supply system
The water distribution subsystem is the most failing subsystem included in the water supply system. One of the main consequences of water supply failures is the lack of water supply to consumers, which is always very onerous. The paper presents a method of determining the conditional probability that a break in the supply of water to consumers of a certain duration will be caused by a specific type of failure. The result of the work was to identify water supply network failures that result in the longest water supply suspension time. The method was presented on a real water supply system. In order to reduce the incidence of long-term interruptions in water supply, water supply companies should mainly continue replacing gray cast iron pipes with thermoplastic materials. Actions taken to increase the safety of drinking water supply meet the current standards for the safety of drinking water, developed by the World Health Organization and the European Union.
Automatic P2P Energy Trading Model Based on Reinforcement Learning Using Long Short-Term Delayed Reward
Jin-Gyeom Kim, Bowon Lee
April 3, 2023 (v1)
Subject: Environment
Keywords: automatic P2P energy trading, deep Q-network, deep reinforcement learning, long short-term delayed reward, Markov decision process
Automatic peer-to-peer energy trading can be defined as a Markov decision process and designed using deep reinforcement learning. We consider prosumer as an entity that consumes and produces electric energy with an energy storage system, and define the prosumer’s objective as maximizing the profit through participation in peer-to-peer energy trading, similar to that of the agents in stock trading. In this paper, we propose an automatic peer-to-peer energy trading model by adopting a deep Q-network-based automatic trading algorithm originally designed for stock trading. Unlike in stock trading, the assets held by a prosumer may change owing to factors such as the consumption and generation of energy by the prosumer in addition to the changes from trading activities. Therefore, we propose a new trading evaluation criterion that considers these factors by defining profit as the sum of the gains from four components: electricity bill, trading, electric energy stored in the energy storage s... [more]
CFD-DEM Simulation of Biomass Pyrolysis in Fluidized-Bed Reactor with a Multistep Kinetic Scheme
Tao Chen, Xiaoke Ku, Jianzhong Lin, Henrik Ström
April 3, 2023 (v1)
Keywords: biomass fluidized-bed pyrolysis, CFD-DEM, multistep kinetic model, tar, two-fluid model
The pyrolysis of biomass in a fluidized-bed reactor is studied by a combination of a CFD-DEM algorithm and a multistep kinetic scheme, where fluid dynamics, heat and mass transfer, particle collisions, and the detailed thermochemical conversion of biomass are all resolved. The integrated method is validated by experimental results available in literature and a considerable improvement in predicting the pyrolysis product yields is obtained as compared to previous works using a two-fluid model, especially the relative error in the predicted tar yield is reduced by more than 50%. Furthermore, the evolution of light gas, char and tar, as well as the particle conversion, which cannot easily be measured in experiments, are also revealed. Based on the proposed model, the influences of pyrolysis temperature and biomass particle size on the pyrolysis behavior in a fluidized-bed reactor are comprehensively studied. Numerical results show that the new algorithm clearly captures the dependence of... [more]
Climate Change Effects on Belgian Households: A Case Study of a Nearly Zero Energy Building
Shady Attia, Camille Gobin
April 3, 2023 (v1)
Keywords: building simulation, climate scenarios, future weather files, global warming, overheating, thermal comfort
Overheating in residential building is a challenging problem that causes thermal discomfort, productivity reduction, and health problems. This paper aims to assess the climate change impact on thermal comfort in a Belgian reference case. The case study represents a nearly zero energy building that operates without active cooling during summer. The study quantifies the impact of climate change on overheating risks using three representative concentration pathway (RCP) trajectories for greenhouse gas concentration adopted by the Intergovernmental Panel on Climate Change (IPCC). Building performance analysis is carried out using a multizone dynamic simulation program EnergyPlus. The results show that bioclimatic and thermal adaptation strategies, including adaptive thermal comfort models, cannot suppress the effect of global warming. By 2050, zero energy buildings will be vulnerable to overheating.
Pigments Production, Growth Kinetics, and Bioenergetic Patterns in Dunaliella tertiolecta (Chlorophyta) in Response to Different Culture Media
Yanara Alessandra Santana Moura, Daniela de Araújo Viana-Marques, Ana Lúcia Figueiredo Porto, Raquel Pedrosa Bezerra, Attilio Converti
April 3, 2023 (v1)
Subject: Biosystems
Keywords: carotenoids, cell growth, chlorophyll, energetic yield, microalgae
This work dealt with the study of growth parameters, pigments production, and bioenergetic aspects of the microalga Dunaliella tertiolecta in different culture media. For this purpose, cultures were carried out in Erlenmeyer flasks containing F/2 medium, Bold’s Basal medium, or an alternative medium made up of the same constituents of the Bold’s Basal medium dissolved in natural seawater instead of distilled water. D. tertiolecta reached the highest dry cell concentration (Xmax = 1223 mgDM·L−1), specific growth rate (µmax = 0.535 d−1), cell productivity (PX = 102 mgDM·L−1·d−1), and photosynthetic efficiency (PE = 14.54%) in the alternative medium, while the highest contents of carotenoids (52.0 mg·g−1) and chlorophyll (108.0 mg·g−1) in the biomass were obtained in Bold’s Basal medium. As for the bioenergetic parameters, the biomass yield on Gibbs energy dissipation was higher and comparable in both seawater-based media. However, the F/2 medium led to the highest values of moles of phot... [more]
A Comprehensive Review on Classification, Energy Management Strategy, and Control Algorithm for Hybrid Electric Vehicles
Qicheng Xue, Xin Zhang, Teng Teng, Jibao Zhang, Zhiyuan Feng, Qinyang Lv
April 3, 2023 (v1)
Keywords: algorithm, classification, energy management strategy, hybrid electric vehicles, Optimization
The energy management strategy (EMS) and control algorithm of a hybrid electric vehicle (HEV) directly determine its energy efficiency, control effect, and system reliability. For a certain configuration of an HEV powertrain, the challenge is to develop an efficient EMS and an appropriate control algorithm to satisfy a variety of development objectives while not reducing vehicle performance. In this research, a comprehensive, multi-level classification for HEVs is introduced in detail from the aspects of the degree of hybridization (DoH), the position of the motor, the components and configurations of the powertrain, and whether or not the HEV is charged by external power. The principle and research status of EMSs for each type of HEV are summarized and reviewed. Additionally, the EMSs and control algorithms of HEVs are compared and analyzed from the perspectives of characteristics, applications, real-time abilities, and historical development. Finally, some discussions about potential... [more]
System Identification and LQR Controller Design with Incomplete State Observation for Aircraft Trajectory Tracking
Piotr Lichota, Franciszek Dul, Andrzej Karbowski
April 3, 2023 (v1)
Keywords: control, flight dynamics, Kalman filter, LQR, static output feedback, system identification, trajectory tracking
This paper presents a controller design process for an aircraft tracking problem when not all states are available. In the study, a nonlinear-transport aircraft simulation model was used and identified through Maximum Likelihood Principle and Extended Kalman Filter. The obtained mathematical model was used to design a Linear−Quadratic Regulator (LQR) with optimal weighting matrices when not all states are measured. The nonlinear aircraft simulation model with LQR controller tracking abilities were analyzed for multiple experiments with various noise levels. It was shown that the designed controller is robust and allows for accurate trajectory tracking. It was found that, in ideal atmospheric conditions, the tracking errors are small, even for unmeasured variables. In wind presence, the tracking errors were proportional to the wind velocity and acceptable for small and moderate disturbances. When turbulence was present in the experiment, state variable oscillations occurred that were pr... [more]
Design and 3D CFD Static Performance Study of a Two-Blade IceWind Turbine
Hamdy Mansour, Rola Afify
April 3, 2023 (v1)
Keywords: aerodynamics, ansys fluent, computational fluid dynamics (CFD), icewind turbine, savonius turbine, static torque, three-dimensional simulation
The IceWind turbine, a new type of Vertical Axis Wind Turbine, was proposed by an Iceland based startup. It is a product that has been featured in few published scientific research studies. This paper investigates the IceWind turbine’s performance numerically. Three-dimensional numerical simulations are conducted for the full scale model using the SST K-ω model at a wind speed of 15.8 m/s. The following results are documented: static torque, velocity distributions and streamlines, and pressure distribution. Comparisons with previous data are established. Additionally, comparisons with the Savonius wind turbine in the same swept area are conducted to determine how efficient the new type of turbine is. The IceWind turbine shows a similar level of performance with slightly higher static torque values. Vortices behind the IceWind turbine are confirmed to be three-dimensional and are larger than those of Savonius turbine.
Safe and Efficient Polymer Electrolyte Membrane Fuel Cell Control Using Successive Linearization Based Model Predictive Control Validated on Real Vehicle Data
Martin Vrlić, Daniel Ritzberger, Stefan Jakubek
April 3, 2023 (v1)
Keywords: automotive, efficient operation, fuel cell, Model Predictive Control, safe operation, successive linearization
In this paper, a polymer electrolyte membrane fuel cell (PEMFC) stack control study is presented. The goal is to track the transient power demand of a real fuel cell (FC) vehicle while ensuring safe and efficient operation. Due to the dynamically changing power demand, fast transients occur in the internal states of the fuel cell (e.g., pressure, humidity, reactant mass) leading to degradation effects (e.g., high/low membrane overpressure, reactants starvation) which are avoided by imposing safety constraints. Efficiency is considered in terms of internal voltage losses minimization as well as minimization of the power of the compressor used to pressurize the cathode. For solving the optimization problem of power demand tracking, adhering to safety constraints, and maximizing efficiency, model predictive control (MPC) has been chosen. Due to the nonlinearity of the FC system, a successive linearization based MPC (SLMPC) is used to control the FC throughout its operating region. Simulat... [more]
Three-Dimensional Geomechanical Modeling and Analysis of Refracturing and “Frac-Hits” in Unconventional Reservoirs
Shahla Feizi Masouleh, Dharmendra Kumar, Ahmad Ghassemi
April 3, 2023 (v1)
Keywords: frac-hits, production and infill well, repressurization, reservoir depletion, stress reorientation/reversal
Field experience has demonstrated that infill well fractures tend to propagate towards the primary well, resulting in well-to-well interference, or so-called “frac-hits”. Frac-hits are a major concern in horizontal well refracturing because they adversely affect the productivity of both wells. This paper provides a 3D geomechanical study of the problem for the first time in order to better understand frac-hits in horizontal well refracturing and its mitigating solutions. To our knowledge, this is the only refracturing study focused on fracture mechanics and within the context of coupled proroelasticity using a single model. The modeling is based on the fully coupled 3D model, GeoFrac-3D, which is capable of simulating multistage fracturing of multiple horizontal wells. The model couples pore pressure to stresses, and makes it possible to create dynamic models of fracture propagation. The modeling results show that production from production well fractures leads to a nonuniform reductio... [more]
An Optimal Peer-to-Peer Market Considering Modulating Heat Pumps and Photovoltaic Systems under the German Levy Regime
Lissy Langer
April 3, 2023 (v1)
Keywords: demand-side flexibility, heat pump, market design, mixed-integer linear programming (MILP), model predictive control (MPC), peer-to-peer market (P2P), photovoltaics (PV), thermal energy storage
The European Commission calls for more small-scale renewable energy producers to actively participate in the energy value chain. In this study, we model an illustrative peer-to-peer (P2P) market with tariffs based on the reservation prices of market participants under the German levy regime. The study is conducted by modeling representative residential buildings with home energy management systems, modulating heat pumps, and photovoltaics, in combination with electrical and thermal storage systems. The resulting mixed-integer linear program is solved over the course of a year, using a rolling horizon approach with a time resolution of one hour. By analyzing the cost- and discomfort-minimizing behavior of the market participants, we evaluate the current levy regime and propose two additional designs. We find that in the current case, a P2P market is not economically viable. Based on feed-in tariffs (FiT) and levies no agreeable market price can be found. With no FiT or reduced levies, a... [more]
Self-Reinforcing Electricity Price Dynamics under the Variable Market Premium Scheme
Ulrich J. Frey, Martin Klein, Kristina Nienhaus, Christoph Schimeczek
April 3, 2023 (v1)
Subject: Energy Policy
Keywords: agent-based simulation, energy policy, market premia, price dynamics, Renewable and Sustainable Energy
We report a potential self-reinforcing design flaw in the variable market premium scheme that occurs if variable renewable energy power plants receiving a premium become price-setting in the market. A high share of renewable energy is a goal of many countries on their transformation path to a sustainable future. Accordingly, policies like feed-in tariffs have been in place for many years in many countries to support investment. To foster market alignment, variable market premia have been introduced in at least 12 European countries and a further dozen additional countries world-wide. We demonstrate both with a mathematical model and different scenarios of an agent-based simulation that the combination of variable premia and a high share of hours in which renewables are price-setting may lead to a self-reinforcing downward spiral of prices if unchecked. This is caused by the market premium opening up the bidding space towards negative prices. We discuss possible objections and counterme... [more]
In Situ Sonification of Anaerobic Digestion: Extended Evaluation of Performance in a Temperate Climate
John Loughrin, Stacy Antle, Jason Simmons, Karamat Sistani, Nanh Lovanh
April 3, 2023 (v1)
Subject: Environment
Keywords: anaerobic digester, biogas, bubbles, Carbon Dioxide, cavitation, dissolved gas, greenhouse gas, methane, sludge, sonification, ultrasonication
Increasing the efficiency of anaerobic digesters and improving sludge breakdown is vital to reducing the cost of biogas production and reducing the environmental consequences of sludge disposal. The performance of two unheated anaerobic digestion systems, one exposed to sound at <20 kHz by waterproofed speakers and one acting as a control, were compared for over a year. The digester systems were both composed of primary (11.4 m3) and secondary (3.8 m3) anaerobic tanks, facultative tertiary (3.0 m3) tanks and an aerobic holding tank from which effluent was mixed with feed and recirculated back to the system. Exposure of the gas saturated digestate to a low frequency sine wave induced numerous bubble harmonics up to, and presumably beyond, ultrasonic range, showing that sonification of a highly gaseous liquid might be used to accomplish low power ultrasonication of digestate at greater distances than is possible with conventional ultrasonic technology. Through the summer of 2019, the... [more]
Study on the Fracture Law of Inclined Hard Roof and Surrounding Rock Control of Mining Roadway in Longwall Mining Face
Feng Cui, Shuai Dong, Xingping Lai, Jianqiang Chen, Chong Jia, Tinghui Zhang
April 3, 2023 (v1)
Keywords: coal pillar stability, lateral abutment pressure, model test, MS monitoring system, thick and hard roof, working face width
In the inclination direction, the fracture law of a longwall face roof is very important for roadway control. Based on the W1123 working face mining of Kuangou coal mine, the roof structure, stress and energy characteristics of W1123 were studied by using mechanical analysis, model testing and engineering practice. The results show that when the width of W1123 is less than 162 m, the roof forms a rock beam structure in the inclined direction, the floor pressure is lower, the energy and frequency of microseismic (MS) events are at a low level, and the stability of the section coal pillar is better. When the width of W1123 increases to 172 m, the roof breaks along the inclined direction, forming a double-hinged structure, the floor pressure is increased, and the frequency and energy of MS events also increases. The roof gathers elastic energy release, and combined with the MS energy release speed it can be considered that the stability of the section coal pillar is better. As the width o... [more]
Optimization of Year-End Water Level of Multi-Year Regulating Reservoir in Cascade Hydropower System Considering the Inflow Frequency Difference
Zhiqiang Jiang, Peibing Song, Xiang Liao
April 3, 2023 (v1)
Subject: Optimization
Keywords: inflow frequency, multi-year regulating reservoir, operation rules, Yalong River basin, year-end water level
In order to analyze the year-end water level of multi-year regulating reservoir of the cascade hydropower system, this paper studied the joint operation optimization model of cascade reservoirs and its solving method based on multi-dimensional dynamic programming, and analyzed the power generation impact factors of cascade system that contains multi-year regulating reservoir. In particular, taking the seven reservoirs in the middle and lower reaches of Yalong River as an example, the optimal year-end water levels of multi-year regulating reservoir under the multi-year average situation and different inflow frequencies situation were studied. Based on the optimal calculation results of multi-dimensional dynamic programming, the inflow frequency difference considered operation rule of year-end water level of Lianghekou reservoir was extracted using the least square principle. The simulation results showed that, compared with the fixed year-end water level in multi-year, the extracted rul... [more]
Showing records 8493 to 8517 of 9292. [First] Page: 1 337 338 339 340 341 342 343 344 345 Last
(0.07 seconds)
Change year: 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | 2026
Change month: January | February | March | April | May | June | July | August | September | October | November | December

[0.13 s]