Browse
Records Added in April 2023
Records added in April 2023
Change month: January | February | March | April | May | June | July | August | September | October | November | December
8393. LAPSE:2023.27096
Application of the Homotopy Method for Fractional Inverse Stefan Problem
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: fractional derivative, heat transfer, inverse problem, inverse Stefan problem, solidification
The paper presents an application of the homotopy analysis method for solving the one-phase fractional inverse Stefan design problem. The problem was to determine the temperature distribution in the domain and functions describing the temperature and the heat flux on one of the considered area boundaries. It was demonstrated that if the series constructed for the method is convergent then its sum is a solution of the considered equation. The sufficient condition of this convergence was also presented as well as the error of the approximate solution estimation. The paper also includes the example presenting the application of the described method. The obtained results show the usefulness of the proposed method. The method is stable for the input data disturbances and converges quickly. The big advantage of this method is the fact that it does not require discretization of the area and the solution is a continuous function.
8394. LAPSE:2023.27095
The Green Versus Green Trap and a Way Forward
April 3, 2023 (v1)
Subject: Energy Policy
Keywords: biodiversity, climate, integrative policy support, Renewable and Sustainable Energy, social participation
Massive deployment of renewables is considered as a decisive step in most countries’ climate efforts. However, at the local scale, it is also perceived by many as a threat to their rich and diverse natural environment. With this perspective, we argue that this green versus green pseudo-dilemma highlights how crucial a broad societal buy-in is. New, transparent, participatory processes and mechanisms that are oriented toward social licensing can now be employed. A novel, integrative research agenda must orbit around co-creation to enable and promote resource co-management and co-ownership where possible, with increased consensus.
8395. LAPSE:2023.27094
Numerical Simulation for Void Coalescence (Water Treeing) in XLPE Insulation of Submarine Composite Power Cables
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: composites, insulators, Modelling, offshore wind energy, power cables, water trees
Due to the growing demand for offshore renewable energy, the development of durable submarine power cables is critical. Submarine power cables are expected to have a service life of over 20 years. However, it has been shown that these cables suffer from water-tree flaws that progressively extend to conductors and corrode copper, which may lead to premature failure. Water treeing is caused by the of interconnection of voids (of a few nanometers) that are present in the insulator after manufacturing or formed during operation. The economic consequences of a breakdown can be drastic due to the heavy maintenance required. In the current study, the insulator is modelled as cubic unit cells containing water voids in the form of ellipsoids. The displacement field of ellipsoids is found to be dependent on its distribution in the cubic cell and on the applied electric field. Von Mises stress and effective plastic strain at the tips of the ellipsoid are found to be significant when either the re... [more]
8396. LAPSE:2023.27093
Mass Transfer Correlation and Optimization of Carbon Dioxide Capture in a Microchannel Contactor: A Case of CO2-Rich Gas
April 3, 2023 (v1)
Subject: Optimization
Keywords: Absorption, Carbon Dioxide Capture, CO2-rich gas, microchannel
This work focused on the application of a microchannel contactor for CO2 capture using water as absorbent, especially for the application of CO2-rich gas. The influence of operating conditions (temperature, volumetric flow rate of gas and liquid, and CO2 concentration) on the absorption efficiency and the overall liquid-side volumetric mass transfer coefficient was presented in terms of the main effects and interactions based on the factorial design of experiments. It was found that 70.9% of CO2 capture was achieved under the operating conditions as follows; temperature of 50 °C, CO2 inlet fraction of 53.7%, total gas volumetric flow rate of 150 mL min−1, and adsorbent volumetric flow rate of 1 mL min−1. Outstanding performance of CO2 capture was demonstrated with the overall liquid-side volumetric mass transfer coefficient of 0.26 s−1. Further enhancing the system by using 2.2 M of monoethanolamine in water (1:1 molar ratio of MEA-to-CO2) boosted the absorption efficiency up to 88%.
8397. LAPSE:2023.27092
Optimization Design of Rib Width and Performance Analysis of Solid Oxide Electrolysis Cell
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: analytical expression, multi-physics, optimal rib/pitch ratio, parameters sensitivity, solid oxide electrolysis cell
Structure design is of great value for the performance improvement of solid oxide electrolysis cells (SOECs) to diminish the gap between scientific research and industrial application. A comprehensive multi-physics coupled model is constructed to conduct parameter sensitivity analysis to reveal the primary and secondary factors on the SOEC performance and optimal rib width. It is found that the parameters of the O2 electrode have almost no influence on the optimal rib width at the H2 electrode side and vice versa. The optimized rib width is not sensitive to the electrode porosity, thickness, electrical conductivity and gas composition. The optimal rib width at the H2 electrode side is sensitive to the contact resistance at the interface between the electrode and interconnect rib, while the extremely small concentration loss at the O2 electrode leads to the insensitivity of optimal rib width to the parameters influencing the O2 diffusion. In addition to the contact resistance, the appli... [more]
8398. LAPSE:2023.27091
Field Test and Numerical Simulation on Heat Transfer Performance of Coaxial Borehole Heat Exchanger
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: coaxial borehole heat exchangers, ground source heat pumps, improved thermal response test, sensitivity analysis
Ground thermal properties are the design basis of ground source heat pumps (GSHP). However, effective ground thermal properties cannot be obtained through the traditional thermal response test (TRT) method when it is used in the coaxial borehole heat exchanger (CBHE). In this paper, an improved TRT (ITRT) method for CBHE is proposed, and the field ITRT, based on the actual project, is carried out. The high accuracy of the new method is verified by laboratory experiments. Based on the results of the ITRT and laboratory experiment, the 3D numerical model for CBHE is established, in which the flow directions, sensitivity analysis of heat transfer characteristics, and optimization of circulation flow rate are studied, respectively. The results show that CBHE should adopt the anulus-in direction under the cooling condition, and the center-in direction under the heating condition. The influence of inlet temperature and flow rate on heat transfer rate is more significant than that of the back... [more]
8399. LAPSE:2023.27090
Power Scalable Bi-Directional DC-DC Conversion Solutions for Future Aircraft Applications
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: DC-DC converters, multi-port dual-active bridge (DAB) converter, power converter, silicon carbide (SiC) MOSFETs, wide-band-gap (WBG) semiconductors
With the introduction of the more electric aircraft, there is growing emphasis on improving overall efficiency and thus gravimetric and volumetric power density, as well as smart functionalities and safety of an aircraft. In future on-board power distribution networks, so-called high voltage DC (HVDC, typically +/−270VDC) supplies will be introduced to facilitate distribution and reduce the associated mass and volume, including harness. Future aircraft power distribution systems will also very likely include energy storage devices (probably, batteries) for emergency back up and engine starting. Correspondingly, novel DC-DC conversion solutions are required, which can interface the traditional low voltage (28 V) DC bus with the new 270 V one. Such solutions presently need to cater for a significant degree of flexibility in their power ratings, power transfer capability and number of inputs/outputs. Specifically, multi-port power-scalable bi-directional converters are required. This pape... [more]
8400. LAPSE:2023.27089
A Novel Analytic Method to Calculate the Equivalent Stray Capacitance of the Low-Speed Maglev Train’s Suspension Electromagnet
April 3, 2023 (v1)
Subject: Process Operations
Keywords: finite element method (FEM), floating potential, maglev train, stray capacitance, suspension electromagnet (SEM)
The suspension electromagnet (SEM) is one of the most critical components of the low-speed maglev train to achieve the stable suspension and non-contact operation with the track. Therefore, it is valuable for optimizing the maglev system to study the characteristics of the SEM. This paper proposes a novel analytic method to calculate the equivalent stray capacitance of the SEM efficiently. It considers the capacitances inside the winding (turn to turn and layer to layer) and between the winding and core. Firstly, utilizing the compensation analytic method (CAM) calculates the static capacitances to reduce the calculation error, and the results of the CAM have significant improvement comparing with that of the traditional analytic method (TAM). Secondly, the analytical formula of the core floating potential is derived based on the partial capacitance theory, which has a 2.1% relative error to the finite element method (FEM). Finally, the experiment results of the SEM of a test rig prove... [more]
8401. LAPSE:2023.27088
Thermochemical Treatment of Sewage Sludge Ash (SSA)—Potential and Perspective in Poland
April 3, 2023 (v1)
Subject: Materials
Keywords: critical raw materials (CRMs), fertilizer, phosphorus (P), sewage sludge (SS), sewage sludge ash (SSA)
Phosphorus (P) recovery from sewage sludge ash (SSA) is one of the most promising approaches of phosphate rock substitution in mineral fertilizers and might be a sustainable way to secure supply of this raw material in the future. In the current investigation, the process of thermochemical treatment of SSA was applied to SSA coming from selected mono-incineration plants of municipal sewage sludge in Poland (Cracow, Gdansk, Gdynia, Lodz, Kielce and Szczecin). The Polish SSA was thermochemically converted in the presence of sodium (Na) additives and a reducing agent (dried sewage sludge) to obtain secondary raw materials for the production of marketable P fertilizers. The process had a positive impact on the bioavailability of phosphorus and reduced the content of heavy metals in the obtained products. The P solubility in neutral ammonium citrate, an indicator of its bioavailability, was significantly raised from 19.7−45.7% in the raw ashes and 76.5−100% in the thermochemically treated S... [more]
8402. LAPSE:2023.27087
Effects of Regional Innovation Capability on the Green Technology Efficiency of China’s Manufacturing Industry: Evidence from Listed Companies
April 3, 2023 (v1)
Subject: Environment
Keywords: China, industry upgrade, innovation capability, intermediary effect, spatial association, sustainable development, Tobit model
The purpose of the “Made in China 2025” strategy is to enhance the innovation capabilities of the local manufacturing industry and achieve green and sustainable development. The role of innovation in the development of manufacturing is a hotspot in academic research, though only a few studies have analyzed the interaction between green technology manufacturing efficiency and its external innovation capabilities. This study used the 2011−2017 Chinese A-share listed manufacturing companies as samples to discuss whether regional innovation capabilities can promote the improvement of green technology manufacturing efficiency. The results showed that a significant spatial correlation between regional innovation capability and green technology manufacturing efficiency was prevalent within spatial heterogeneous bounds. In addition, regional innovation capability directly promoted the effective manufacturing of green technology efficiency, which was strongest in the eastern region of the count... [more]
8403. LAPSE:2023.27086
PLS-CNN-BiLSTM: An End-to-End Algorithm-Based Savitzky−Golay Smoothing and Evolution Strategy for Load Forecasting
April 3, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: Bidirectional Long Short-Term Memory (BiLSTM), Convolutional Neural Network (CNN), evolution strategy, Partial Least Square (PLS) method, Savitzky–Golay, Short-Term Load Forecasting (STLF)
This paper proposes an effective deep learning framework for Short-Term Load Forecasting (STLF) of multivariate time series. The proposed model consists of a hybrid Convolutional neural network-Bidirectional Long Short-Term Memory (CBiLSTM) based on the Evolution Strategy (ES) method and the Savitzky−Golay (SG) filter (SG-CBiLSTM). The adopted methodology incorporates the virtue of different prepossessing blocks to enhance the performance of the CBiLSTM model. In particular, a data-augmentation strategy is employed to synthetically improve the feature representation of the CBiLSTM model. The augmented data is forwarded to the Partial Least Square (PLS) method to select the most informative features above the predefined threshold. Next, the SG algorithm is computed for smoothing the load to enhance the learning capabilities of the underlying system. The structure of the SG-CBiLSTM for the ISO New England dataset is optimized using the ES technique. Finally, the CBiLSTM model generates o... [more]
8404. LAPSE:2023.27085
Kinetics of Biotic and Abiotic CO Production during the Initial Phase of Biowaste Composting
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: abiotic, aerobic digestion, biorenewables, biotic, biowaste, carbon monoxide, GHGs mitigation, green chemistry, kinetic modeling, waste management
Knowledge of kinetic parameters of CO production during biowaste composting is significantly important for the prediction of its course and estimation of total gas quantity. This allows increasing the control of the process, to minimize its negative impact on the environment and to protect the occupational safety of employees exposed to CO in the biowaste composting plant. For the first time, a full study of the influence of temperature and biowaste sterilization on the kinetics of CO production is presented. The lab-scale experiments used a mixture of green waste, dairy cattle manure, and sawdust in two variants: sterilized and non-sterilized samples. The process was carried out in controlled temperature reactors with measuring the concentrations of CO, O2, and CO2 every 12 h.CO production and k value increased with temperature. However, higher CO production was observed in biotic conditions between 10~50 °C, suggesting the biotic CO formation and 1st-order kinetics. The abiotic (ther... [more]
8405. LAPSE:2023.27084
Integration Design and Operation Strategy of Multi-Energy Hybrid System Including Renewable Energies, Batteries and Hydrogen
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: AC-DC hybrid bus, experiment platform, hydrogen energy subsystem, multi-energy complementation, operation strategy, state monitoring
In some areas, the problem of wind and solar power curtailment is prominent. Hydrogen energy has the advantage of high storage density and a long storage time. Multi-energy hybrid systems including renewable energies, batteries and hydrogen are designed to solve this problem. In order to reduce the power loss of the converter, an AC-DC hybrid bus is proposed. A multi-energy experiment platform is established including a wind turbine, photovoltaic panels, a battery, an electrolyzer, a hydrogen storage tank, a fuel cell and a load. The working characteristics of each subsystem are tested and analyzed. The multi-energy operation strategy is based on state monitoring and designed to enhance hydrogen utilization, energy efficiency and reliability of the system. The hydrogen production is guaranteed preferentially and the load is reliably supplied. The system states are monitored, such as the state of charge (SOC) and the hydrogen storage level. The rated and ramp powers of the battery and f... [more]
8406. LAPSE:2023.27083
The DSR Scheme in the Capacity Market of Industrial Enterprises in Poland—Participation Determinants
April 3, 2023 (v1)
Subject: Process Operations
Keywords: capacity market, capacity market DSR program, DSR, DSR guaranteed program
The purpose of this article is to present the key differences between the Polish Guaranteed DSR (demand-side response) Scheme operating from 2017 to 2020 and the Polish Capacity Market DSR Scheme operating from 2021, and their impacts on the decision to participate in the DSR scheme. The present study attempts to compare the rules of the old and new schemes and their impacts on the participation decision depending on the industry of the potential scheme participant. The study was conducted on a group of 50 randomly selected companies. A structured interview was used to collect information, and a chi-quadrant independence test and a Wilcoxon−Mann−Whitney test were used in the analysis of the collected data. The study was conducted in selected enterprises located in Poland. The results of the study indicate the elements that are similar to the literature on the subject, and key aspects arising from the unique characteristics of the Polish market and the industry of the potential particip... [more]
8407. LAPSE:2023.27082
A Serverless Advanced Metering Infrastructure Based on Fog-Edge Computing for a Smart Grid: A Comparison Study for Energy Sector in Iraq
April 3, 2023 (v1)
Subject: Energy Management
Keywords: advanced metering infrastructure, fog computing, Function as a Services (FaaS), serverless, smart grid
The development of the smart grid (SG) has the potential to bring significant improvements to the energy generation, transmission, and distribution sectors. Hence, adequate handling of fluctuating energy demands is required. This can only be achieved by implementing the concept of transactive energy. Transactive energy aims to optimize energy production, transmission, and distribution combined with next-generation hardware and software, making it a challenge for implementation at a national level, and to ensure the effective collaboration of energy exchange between consumers and producers, a serverless architecture based on functionality can make significant contributions to the smart grids advanced metering infrastructure (SG-AMI). In this paper, a scalable serverless SG-AMI architecture is proposed based on fog-edge computing, virtualization consideration, and Function as a service (FaaS) as a services model to increase the operational flexibility, increase the system performance, an... [more]
8408. LAPSE:2023.27081
Breakage Characterization of Magnetite under Impact Loads and Cyclic Impact Loading
April 3, 2023 (v1)
Subject: Materials
Keywords: breakage characteristic, fractal dimension, fractography, SHPB setup, strain rate
A series of impact compression tests were conducted to study the breakage characteristics of magnetite, as well as the impact pressure on its strain rate and dynamic compressive strength. The dynamic mechanical properties and fragmentation size distribution of magnetite under diverse impact loads and cyclic impact were investigated, with fractal theory as a basis and split Hopkinson pressure bar (SHPB). Breakage methods were also employed to analyze the fracture morphology of magnetite. According to the result, the fractal dimension can reflect the distribution of fragments in various sizes. If the strain rate increases, the fractal dimension will be larger, the fragment size will be finer, and the fragmentation degree will be more influential. A micro-analysis of SEM images demonstrates that the fracture morphology is determined by mineral properties. Under low load cyclic impact, intergranular fracture is the main fractography. Besides, the intergranular fracture will be changed to a... [more]
8409. LAPSE:2023.27080
Single-Chamber Microbial Fuel Cells’ Behavior at Different Operational Scenarios
April 3, 2023 (v1)
Subject: Biosystems
Keywords: anode, cathode, MFC, oxidizing agent, voltage
A Microbial Fuel Cell (MFC) is a process in which a microorganism respires and captures the electrons that normally passes through the electron transport system of the organism and produces electricity. This work intends to present the different operating parameters affecting the efficiency of a Microbial Fuel Cell (MFC) process. To study the performance of the process, various materials for the cathode and anode rods with similar size and chape including, copper, aluminum, carbon cloth, steel and brass were considered to determine the combination that leads to the best results. Moreover, different oxidizing agents such as Copper Sulphate and Potassium Hexacyanoferrate were considered. Furthermore, the effects of shapes, sizes and distance between electrodes on the current and voltage were investigated. The power outputs between electrochemical and microbial cells were recorded. In addition, the power, whether expressed as voltage or current, was measured at different conditions and di... [more]
8410. LAPSE:2023.27079
Simulation of Mixing Intensity Profile for Bioethanol Production via Two-Step Fermentation in an Unbaffled Agitator Reactor
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: alternative fuel, bioenergy, bioethanol fermentation, Computational Fluid Dynamics, green energy, impeller geometry
Bioethanol synthesis techniques have been studied intensively due to the energy crisis and various environmental concerns. A two-step bioethanol production process was carried out multiple times in an unbaffled agitator tank. The parameters varied, including the fermentation temperature, the pH level, the amount of yeast, and the impeller type. Then, a simulation was used to obtain an image of the agitation behavior inside the agitator tank to compare the velocity profile of each type of impeller design. The impeller with eight blades was found to produce the highest flow velocity: 0.28 m/s. The highest concentration of bioethanol generated from the fermentation was 34 g/L, which was produced by using an eight-blade impeller at 30 °C, a pH level of 5, an agitation speed of 70 rpm, and 2 wt % yeast. The two-blade impeller produced the lowest bioethanol concentration, 18 g/L, under the same conditions. Ethanol concentration was found to peak at 40 °C and a pH level of 5. The geometry of... [more]
8411. LAPSE:2023.27078
Higher Education Learning How to Protect the Environment
April 3, 2023 (v1)
Subject: Environment
Keywords: elementary school, Energy Efficiency, environmental education, experimental learning, Renewable and Sustainable Energy
“Israeli Hope in Academia” is a program, designed by the president of the state of Israel, Reuven Rivlin. The program is based on the perception that Israeli society is changing, from having a clear majority and several minorities to a society comprised of four principal sectors that are roughly similar in size: secular Jews, religious Jews, Haredi (ultra-orthodox) Jews and Arabs. The program acts to encourage a more diverse and culturally competent higher education system that promotes partnership. One of the means to achieve that goal is to create meaningful educational interactions between people from academia and the younger generation of these sectors. Over the past year, students from various faculties in the Holon Institute of Technology (HIT) took part in a course called “Green Ambassadors”, which corresponds with the “Israeli Hope” program. This course was considered an action learning course, which is a course that combines academic learning and social involvement that has an... [more]
8412. LAPSE:2023.27077
Integration of Micro-Cogeneration Units and Electric Storages into a Micro-Scale Residential Solar District Heating System Operating with a Seasonal Thermal Storage
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: auxiliary back-up technology, electric storage, long-term borehole thermal storage, micro-scale district heating network, solar energy
A micro-scale district heating network based on the operation of solar thermal collectors coupled to a long-term borehole thermal storage is modeled, simulated and investigated over a period of five years. The plant is devoted to covering the domestic hot water and space heating demands of a district composed of six typical residential buildings located in Naples (southern Italy). Three alternative natural gas-fueled back-up auxiliary systems (condensing boiler and two different technologies of micro-cogeneration) aiming at balancing the solar energy intermittency are investigated. The utilization of electric storages in combination with the cogeneration systems is also considered with the aim of improving the self-consumption of cogenerated electric energy; heat recovery from the distribution circuit is also evaluated to pre-heat the mains water for domestic hot water production. The performances of the proposed plant schemes are contrasted with those of a typical Italian decentralize... [more]
8413. LAPSE:2023.27076
A Review of the Integrated Design and Control of Electrified Vehicles
April 3, 2023 (v1)
Subject: Process Control
Keywords: component sizing, electrified vehicle, energy management, optimization-based control, rule-based control, thermal management, topology optimization
From a control perspective, the energy management system and the thermal management system of an electrified vehicle are often developed separately, which may not yield the optimal solution. Moreover, an optimal system design requires concurrent plant (topology and size) and controller optimization, which should apply to both energy and thermal domains. This paper originally provides a comprehensive analysis of design and control optimization layers to reveal the interconnections between them and how they influence the optimality of an electrified vehicle design considering both energy and thermal domains. It was found that energy and cost savings can be achieved by integrating these optimization layers, and the energy and thermal domains with four coordination schemes, namely, sequential, iterative, nested and simultaneous. There is a trade-off between optimality, causality, complexity and computational time. Additionally, future research directions in terms of reducing energy consump... [more]
8414. LAPSE:2023.27075
Neural Methods Comparison for Prediction of Heating Energy Based on Few Hundreds Enhanced Buildings in Four Season’s Climate
April 3, 2023 (v1)
Subject: Intelligent Systems
Keywords: building energy consumption, building load forecasting, Energy Efficiency, Machine Learning, neural methods, smart intelligent systems, thermal improved of buildings
Sustainable development and the increasing demand for equitable energy use as well as the reduction of waste of energy are the author’s social and scientific motivations. This new paradigm is the selection of a pertinent methodology to evaluate the efficiency of habitat thermomodernization, which is one of the scientific tasks of the presented study. In order to meet the social and scientific requirements, 380 buildings from the end of the last century (made of large plate technology), which were thermally improved at the beginning of the XXI century, were designed for a comparative analysis of the predictive modelling of heating energy consumption. A specific set of important variables characterizing the examined buildings has been identified. Groups of variables were used to estimate the energy consumption in such a way as to achieve a compromise between the difficulty of obtaining them and the quality of forecast. To predict energy consumption, the six most appropriate neural method... [more]
8415. LAPSE:2023.27074
Development of HVRT and LVRT Control Strategy for PMSG-Based Wind Turbine Generators
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: high voltage ride-through (HVRT), low voltage ride-through (LVRT), permanent magnet synchronous generator (PMSG), wind energy conversion system (WECS)
Various challenges are acknowledged in practical cases with high wind power penetration. Fault ride-through (FRT) capability has become the most dominant grid integration requirements for the wind energy conversion system worldwide. The high voltage ride-through (HVRT) and low voltage ride-through (LVRT) performance play a vital role in the grid-friendly integration into the system. In this paper, a coordinated HVRT and LVRT control strategy is proposed to enhance the FRT capability of the permanent magnet synchronous generator (PMSG)-based wind turbine generators (WTG). A dual-mode chopper protection is developed to avoid DC-link overvoltage, and a deadband protection is proposed to prevent oscillations under edge voltage conditions. The proposed strategy can ride through different levels of voltage sags or swells and provide auxiliary dynamic reactive power support simultaneously. The performance of the proposed control scheme is validated through various comparison case tests in PSC... [more]
8416. LAPSE:2023.27073
Short-Term Electricity Price Forecasting with Recurrent Regimes and Structural Breaks
April 3, 2023 (v1)
Subject: Energy Management
Keywords: day-ahead electricity markets, electricity price forecasting, fundamental-econometric models, market structural breaks
This paper develops a new approach to short-term electricity forecasting by focusing upon the dynamic specification of an appropriate calibration dataset prior to model specification. It challenges the conventional forecasting principles which argue that adaptive methods should place most emphasis upon recent data and that regime-switching should likewise model transitions from the latest regime. The approach in this paper recognises that the most relevant dataset in the episodic, recurrent nature of electricity dynamics may not be the most recent. This methodology provides a dynamic calibration dataset approach that is based on cluster analysis applied to fundamental market regime indicators, as well as structural time series breakpoint analyses. Forecasting is based upon applying a hybrid fundamental optimisation model with a neural network to the appropriate calibration data. The results outperform other benchmark models in backtesting on data from the Iberian electricity market of... [more]
8417. LAPSE:2023.27072
Simple Structure of Soft Switching for Boost Converter
April 3, 2023 (v1)
Subject: Process Control
Keywords: boost converter, FPGA, QR, soft switching, ZCS, ZVS, ZVT
A soft switching boost converter, with a small number of components and constant frequency control, is proposed herein by using the quasi-resonance method and the zero-voltage-transition method, realizing (1) the zero-voltage switching during the switch-on transient of the main switch, (2) the zero-current switching during the switch-off transient of the main switch, (3) the zero-current switching during the switch-on transient of the auxiliary switch, and (4) the zero-current switching during the switch-off transient of the auxiliary switch. Accordingly, the corresponding efficiency can be improved. The feasibility and effectiveness of the proposed structure are validated by the field programmable gate array (FPGA).
[0.13 s]

