Browse
Records Added in April 2023
Records added in April 2023
Change month: January | February | March | April | May | June | July | August | September | October | November | December
8468. LAPSE:2023.27021
Geophysical Prospecting for Geothermal Resources in the South of the Duero Basin (Spain)
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: borehole logging, geophysical prospecting, geothermal gradient, geothermal resources, thermal conductivity, time-domain electromagnetics
The geothermal resources in Spain have been a source of deep research in recent years and are, in general, well-defined. However, there are some areas where the records from the National Institute for Geology and Mining show thermal activity from different sources despite no geothermal resources being registered there. This is the case of the area in the south of the Duero basin where this research was carried out. Seizing the opportunity of a deep borehole being drilled in the location, some geophysical resources were used to gather information about the geothermal properties of the area. The employed geophysical methods were time-domain electromagnetics (TDEM) and borehole logging; the first provided information about the depth of the bedrock and the general geological structure, whereas the second one gave more detail on the geological composition of the different layers and a temperature record across the whole sounding. The results allowed us to establish the geothermal gradient o... [more]
8469. LAPSE:2023.27020
Development and Evaluation of Occupancy-Aware HVAC Control for Residential Building Energy Efficiency and Occupant Comfort
April 3, 2023 (v1)
Subject: Process Control
Keywords: energy consumption, HVAC control, occupancy prediction, thermal comfort
Occupancy-aware heating, ventilation, and air conditioning (HVAC) control offers the opportunity to reduce energy use without sacrificing thermal comfort. Residential HVAC systems often use manually-adjusted or constant setpoint temperatures, which heat and cool the house regardless of whether it is needed. By incorporating occupancy-awareness into HVAC control, heating and cooling can be used for only those time periods it is needed. Yet, bringing this technology to fruition is dependent on accurately predicting occupancy. Non-probabilistic prediction models offer an opportunity to use collected occupancy data to predict future occupancy profiles. Smart devices, such as a connected thermostat, which already include occupancy sensors, can be used to provide a continually growing collection of data that can then be harnessed for short-term occupancy prediction by compiling and creating a binary occupancy prediction. Real occupancy data from six homes located in Colorado is analyzed and... [more]
8470. LAPSE:2023.27019
Thermochemical Conversion of Biomass in the Presence of Molten Alkali-Metal Carbonates under Reducing Environments of N2 and CO2
April 3, 2023 (v1)
Subject: Environment
Keywords: Biomass, Boudouard reaction, carbonate gasification, slow pyrolysis, ternary eutectic
The impact of N2 and CO2 atmospheres on the interaction between Eucalyptus pilularis biomass and a ternary molten carbonate eutectic (Li2CO3: Na2CO3: K2CO3) has been investigated at 600 °C and 900 °C. For lower temperature conversion under CO2, prevention of volatile release in the eutectic treated biomass is slightly higher than under N2 injection; however, similar bubble-shaped morphology of the remnant char is observed under both carrier gases. By increasing the temperature to 900 °C under CO2, the reverse Boudouard reaction begins to consume carbon fuel, while molten carbonate gasification also accelerates the reaction to a lower temperature set point (shifted from ~735 °C to ~640 °C). The mass loss of carbonate under CO2 and N2 at 900 °C is 0 (negligible) and 18 wt.%, respectively. In the absence of carbon particles, the decomposition of carbonate to M2O (l) and CO2 (g), as well as molten salt vaporization, are the sole potential routes of weight loss in an inert gas. Previous obs... [more]
8471. LAPSE:2023.27018
Modeling of the Chemical Looping Combustion of Hard Coal and Biomass Using Ilmenite as the Oxygen Carrier
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: Biomass, CeSFaMB, chemical looping combustion, hard coal, ilmenite, oxygen carrier
This paper presents a 1.5D model of a fluidized bed chemical looping combustion (CLC) built with the use of a comprehensive simulator of fluidized and moving bed equipment (CeSFaMB) simulator. The model is capable of calculating the effect of gas velocity in the fuel reactor on the hydrodynamics of the fluidized bed and the kinetics of the CLC process. Mass of solids in re actors, solid circulating rates, particle residence time, and the number of particle cycles in the air and fuel reactor are considered within the study. Moreover, the presented model calculates essential emissions such as CO2, SOX, NOX, and O2. The model was successfully validated on experimental tests that were carried out on the Fluidized-Bed Chemical-Looping-Combustion of Solid-Fuels unit located at the Institute of Advanced Energy Technologies, Czestochowa University of Technology, Poland. The model’s validation showed that the maximum relative errors between simulations and experiment results do not exceed 10%.... [more]
8472. LAPSE:2023.27017
Effect of Sampling Rate on Photovoltaic Self-Consumption in Load Shifting Simulations
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: demand response, load shifting, PV self-consumption, Renewable and Sustainable Energy, sampling rate, Simulation
Grid-connected photovoltaic (PV) capacity is increasing and is currently estimated to account for 3.0% of worldwide energy generation. One strategy to balance fluctuating PV power is to incentivize self-consumption by shifting certain loads. The potential improvement in the amount of self-consumption is usually estimated using smart meter and PV production data. Smart meter data are usually available only at sampling frequences far below the Nyquist limit. In this paper we investigate how this insufficient sampling rate affects the estimated self-consumption potential of shiftable household appliances (washing machines, tumble dryers and dishwashers). We base our analyses on measured consumption data from 16 households in the UK and corresponding PV data. We found that the simulated results have a marked dependence on the data sampling rate. The amount of self-consumed energy estimated with data sampled every 10 min was overestimated by 30−40% compared to estimations using data with 1... [more]
8473. LAPSE:2023.27016
Distinct Turbulent Regions in the Wake of a Wind Turbine and Their Inflow-Dependent Locations: The Creation of a Wake Map
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: homogeneous isotropic turbulence, turbulence, turbulence decay, wake map, wind turbine wake
Wind turbines are usually clustered in wind farms which causes the downstream turbines to operate in the turbulent wakes of upstream turbines. As turbulence is directly related to increased fatigue loads, knowledge of the turbulence in the wake and its evolution are important. Therefore, the main objective of this study is a comprehensive exploration of the turbulence evolution in the wind turbine’s wake to identify characteristic turbulence regions. For this, we present an experimental study of three model wind turbine wake scenarios that were scanned with hot-wire anemometry with a very high downstream resolution. The model wind turbine was exposed to three inflows: laminar inflow as a reference case, a central wind turbine wake, and half of the wake of an upstream turbine. A detailed turbulence analysis reveals four downstream turbulence regions by means of the mean velocity, variance, turbulence intensity, energy spectra, integral and Taylor length scales, and the Castaing paramete... [more]
8474. LAPSE:2023.27015
Optimal Under-Frequency Load Shedding Setting at Altai-Uliastai Regional Power System, Mongolia
April 3, 2023 (v1)
Subject: Process Control
Keywords: frequency control, improved harmony search, metaheuristic algorithm, Mongolian power system, optimisation, under-frequency load shedding
The Altai-Uliastai regional power system (AURPS) is a regional power system radially interconnected to the power system of Mongolia. The 110 kV interconnection is exceptionally long and susceptible to frequent trips because of weather conditions. The load-rich and low-inertia AURPS must be islanded during interconnection outages, and the under-frequency load shedding (UFLS) scheme must act to ensure secure operation. Traditional UFLS over-sheds local demand, negatively affecting the local population, especially during the cold Mongolian winter season. This research paper proposes a novel methodology to optimally calculate the settings of the UFLS scheme, where each parameter of the scheme is individually adjusted to minimise the total amount of disconnected load. This paper presents a computationally efficient methodology that is illustrated in a specially created co-simulation environment (DIgSILENT® PowerFactoryTM + Python). The results demonstrate an outstanding performance of the p... [more]
8475. LAPSE:2023.27014
Characterization of Customized Encapsulant Polyvinyl Butyral Used in the Solar Industry and Its Impact on the Environment
April 3, 2023 (v1)
Subject: Environment
Keywords: environment, polyvinyl butyral, Solar Panels
Taking climate and geopolitical issues into account, we must shift our thinking towards “eco” and focus on renewable energy. The accessible solar energy represents 400 times the amount of consumption, while its potential represents 10,000 times the amount of demand. The paper aims to analyze recycled, customized polyvinyl butyral (PVB) with high purity (more than 98%) concerning its physicochemical and mechanical properties and its possible applicability in the photovoltaic industry as an encapsulating material. The detailed investigation on polyvinyl butyral starting from characterizations, homogenization, and moulding process to tensile tests and used exposure testing in laboratory apparatus are performed. Samples of recycled polyvinyl butyral were exposed to ultraviolet (UV) radiation of the value 0.76 W.m−2.nm−1 at 340 nm, water spray, drying at 50 °C and condensation for 320 h when the radiation was turned off. The results obtained were more controlled in a laboratory environment... [more]
8476. LAPSE:2023.27013
An Inter-Comparison of Dynamic, Fully Coupled, Electro-Mechanical, Models of Tidal Turbines
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: actuator line model, blade element momentum theory, Computational Fluid Dynamics, coupled system, electrical system, tidal turbine
Production of electricity using hydrokinetic tidal turbines has many challenges that must be overcome to ensure reliable, economic and practical solutions. Kinetic energy from flowing water is converted to electricity by a system comprising diverse mechanical and electrical components from the rotor blades up to the electricity grid. To date these have often been modelled using simulations of independent systems, lacking bi-directional, real-time, coupling. This approach leads to critical effects being missed. Turbulence in the flow, results in large velocity fluctuations around the blades, causing rapid variation in the shaft torque and generator speed, and consequently in the voltage seen by the power electronics and so compromising the export power quality. Conversely, grid frequency and voltage changes can also cause the generator speed to change, resulting in changes to the shaft speed and torque and consequently changes to the hydrodynamics acting on the blades. Clearly, fully in... [more]
8477. LAPSE:2023.27012
Influence Analysis of Structural Parameters on the Performance of 120° Phase Belts Toroidal Winding Solid Rotor Induction Motor
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: 120° phase belt toroidal winding, electromagnetic characteristics, influence analysis, solid rotor induction motor, structural parameters
120° phase belt toroidal winding solid rotor induction motor (120°PBTWSRIM) has advantages of simple structure, short end winding, and high overload capacity, thus it has good development prospects. To study the influence of different structural parameters on 120°PBTWSRIM performance, the 2D finite element model is established, and the electromagnetic characteristics are analyzed. The influence of six structure parameters on the average output torque, power factor, and torque ripple are analyzed, which are slot opening width, slot opening height, slot width, slot height, slot radius, and copper layer thickness. It is found that copper layer thickness has a significant effect on the performance of 120°PBTWSRIM. When the copper layer thickness is 0.5 mm, locked average output torque is increased to 2.784 Nm, locked power factor is increased by 64.6%, and locked torque ripple is reduced by 79.7%. Finally, a prototype of 120°PBTWSRIM is built and experimented, the correctness of performanc... [more]
8478. LAPSE:2023.27011
Design Optimization of a Reluctance Lead Screw for Wave Energy Conversion
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: finite element analysis (FEA), linear actuator, magnetic lead screw (MLS), reluctance lead screw (RLS), wave energy converter (WEC)
A reluctance lead screw (RLS) is proposed in this paper which consists of a rotor and a translator, forming a magnetic device that is able to transfer low-speed linear motion into high-speed rotational motion. Permanent magnets (PMs) are only installed in the rotor, making it more suitable for long-stroke applications. The design aspects are assessed by finite element analysis (FEA) and the performance is evaluated. In addition, the thrust force per magnet volume is presented for evaluating the utilization rate of the PMs. The simulation results show that RLS has an advantage in terms of the PM utilization rate. A new method for realizing spiral magnets has also been developed which can not only reduce the manufacturing difficulties, but also ease the installation work. Finally, based on the simulations and analyses, two RLS prototypes designed for wave energy converters (WECs) are presented to show the potential applications of this novel topology.
8479. LAPSE:2023.27010
Remuneration of Distribution Grids for Enhanced Regenerative Electricity Deployment—An Analysis and Model for the Analysis of Grid Structures in Southern Germany Using Linear Programming
April 3, 2023 (v1)
Subject: Optimization
Keywords: electrical power grids, feed-in, linear programming, Optimization, photovoltaic/wind energy
Ecological concerns on the climatic effects of the emissions from electricity production stipulate the remuneration of electricity grids to accept growing amounts of intermittent regenerative electricity feed-in from wind and solar power. Germany’s eager political target to double regenerative electricity production by 2030 puts pressure on grid operators to adapt and restructure their transmission and distribution grids. The ability of local distribution grids to operate autonomous of transmission grid supply is essential to stabilize electricity supply at the level of German federal states. Although congestion management and collaboration at the distribution system operator (DSO) level are promising approaches, relatively few studies address this issue. This study presents a methodology to assess the electric energy balance for the low-voltage grids in the German federal state of Baden-Württemberg, assuming the typical load curves and the interchange potential among local distributio... [more]
8480. LAPSE:2023.27009
Thermal and Economic Analysis of Multi-Effect Concentration System by Utilizing Waste Heat of Flue Gas for Magnesium Desulfurization Wastewater
April 3, 2023 (v1)
Subject: Environment
Keywords: economic performance, flue gas waste heat, magnesium desulfurization wastewater, multi-effect concentration, thermal performance
Compared with limestone-based wet flue gas desulfurization (WFGD), magnesia-based WFGD has many advantages, but it is not popular in China, due to the lack of good wastewater treatment schemes. This paper proposes the wastewater treatment scheme of selling magnesium sulfate concentrate, and makes thermal and economic analysis for different concentration systems in the scheme. Comparisons of different concentration systems for 300 MW power plant were made to determine which system is the best. The results show that the parallel-feed benchmark system is better than the forward-feed benchmark system, and the parallel-feed optimization system with the 7-process is better than other parallel-feed optimization systems. Analyses of the parallel-feed optimization system with 7-process were made in 300, 600, and 1000 MW power plants. The results show that the annual profit of concentration system for a 300, 600, and 1000 MW power plant is about 2.58 million, 5.35 million, and 7.89 million Chine... [more]
8481. LAPSE:2023.27008
Biomass to Syngas: Modified Stoichiometric Thermodynamic Models for Downdraft Biomass Gasification
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: biomass gasification, methanation reaction, Modelling, Optimization, stoichiometric, thermodynamics, water gas shift reactions
To help meet the global demand for energy and reduce the use of fossil fuels, alternatives such as the production of syngas from renewable biomass can be considered. This conversion of biomass to syngas is possible through a thermochemical gasification process. To design such gasification systems, model equations can be formulated and solved to predict the quantity and quality of the syngas produced with different operating conditions (temperature, the flow rate of an oxidizing agent, etc.) and with different types of biomass (wood, grass, seeds, food waste, etc.). For the comparison of multiple different types of biomass and optimization to find optimal conditions, simpler models are preferred which can be solved very quickly using modern desktop computers. In this study, a number of different stoichiometric thermodynamic models are compared to determine which are the most appropriate. To correct some of the errors associated with thermodynamic models, correction factors are utilized... [more]
8482. LAPSE:2023.27007
Geometric Aspects of Assessing the Amount of Material Consumption in the Construction of a Designed Single-Family House
April 3, 2023 (v1)
Subject: Materials
Keywords: building shape, compactness indicator, correlation, cost of building, cuboid, design of a building, embodied energy, geometric efficiency of a building, relative defect of area, relative defect of perimeter
In this paper, we present a new approach for the analysis of the dependence of construction costs on the geometric shape of a building. Instead of difficult or even impossible-to-establish uniform prices and costs, we propose a cost analysis concerning the amount of materials needed for construction. We show that the basic parameters are the base area of the building (plan), assumed in the study as the building area, and the area of the external walls of the building. The amount of consumption of most materials is proportional to the base area and the area of the external walls. The materials required for construction consume large amounts of energy during their manufacture. Therefore, shape optimization is not only economically significant for the investor but is also important in terms of the energy consumption, i.e., embodied energy. We propose a set of indicators to help a designer optimize the shape of the building at the initial design stage.
8483. LAPSE:2023.27006
Simulated Annealing, Differential Evolution and Directed Search Methods for Generator Maintenance Scheduling
April 3, 2023 (v1)
Subject: Planning & Scheduling
Keywords: differential evolution, directed search, generator, maintenance, Scheduling, simulated annealing
Generator maintenance scheduling presents many engineering issues that provide power system personnel with a variety of challenges, and one can hardly afford to neglect these engineering issues in the future. Additionally, there is vital need for further development of the repair planning task complexity in order to take into account the vast majority of power flow constraints. At present, the question still remains as to which approach is the simplest and most effective, as well as appropriate for further application in the power flow-oriented statement of the repair planning problem. This research compared directed search, differential evolution, and very fast simulated annealing methods based on a number of numerical calculations and made conclusions about their prospective utilization in terms of a more complicated mathematical formulation of the repair planning task. A comparison of results shows that the effectiveness of directed search methods should not be underestimated, and t... [more]
8484. LAPSE:2023.27005
Promoting and Inhibitory Effects of Hydrophilic/Hydrophobic Modified Aluminum Oxide Nanoparticles on Carbon Dioxide Hydrate Formation
April 3, 2023 (v1)
Subject: Materials
Keywords: aluminum oxide nanoparticles, CO2 hydrates, gas consumption rate, hydrophilic/hydrophobic modified particles, induction time, phase equilibrium
Hydrate-based CO2 capture from large emission sources is considered a promising process for greenhouse gas mitigation. The addition of nanoparticles may promote or inhibit the formation of hydrates. In this work, CO2 hydrate formation experiments were performed in a dual-cell high-pressure reactor. Non-modified, hydrophilic modified and hydrophobic modified aluminum oxide (Al2O3) nanoparticles at different concentrations were added to assess their promoting or inhibitory effects on CO2 hydrate formation. The equilibrium temperature and pressure, induction time, and total gas consumption during CO2 hydrate formation were measured. The results show that the presence of Al2O3 nanoparticles exerts little effect on the phase equilibrium of CO2 hydrates. Under the experimental conditions, the addition of all Al2O3 nanoparticles imposes an inhibitory effect on the final gas consumption except for the 0.01 wt% addition of hydrophilic modified Al2O3 nanoparticles. The induction time required fo... [more]
8485. LAPSE:2023.27004
Implementation of Three-Dimensional Inverse Design and Its Application to Improve the Compressor Performance
April 3, 2023 (v1)
Subject: Process Design
Keywords: aerodynamic design, Compressors, efficiency
The implementation of a three-dimensional viscous inverse design used for an axial compressor is introduced in this paper. The derivation process of the inverse design algorithm is also described in detail. Moreover, an improved blade update method and a modified relaxation factor are included to enhance the inverse design algorithm. The inverse design is built on an in-house inverse design module coupled with commercial Computational Fluid Dynamic (CFD) software NUMECATM. In contrast to analysis design, the pressure loading and the normal thickness distribution along the blade surfaces are prescribed during the process of inverse design. The numerical methods used to solve the flow field are verified using the experimental data of the transonic fan rotor NASA Rotor 67. A recovery test for the Rotor 67 is carried out to validate the developed three-dimensional inverse design tool. To explore the potential application of the inverse design system, it is then used to improve the aerodyna... [more]
8486. LAPSE:2023.27003
Spatial Energy Planning: A Review
April 3, 2023 (v1)
Subject: Planning & Scheduling
Keywords: decision-makers, energy planning, environmental, planning tool, Renewable and Sustainable Energy, social, Sustainability, sustainable energy transition
Despite the fact that some renewable energy (RE) technologies are already techno-economically viable, the high spatial dilution nature of their sources, together with aspects beyond the techno-economic ones (such as environmental, social, cultural, and other aspects), can become strong constraints and barriers when it comes to their integration into electric systems. Therefore, with the objective of determining whether studies on spatial energy planning (SEP) are addressing these issues, a systematic review has been carried out to address whether SEP studies are considering aspects beyond the techno-economic ones when integrating RE technologies and, if they are being considered, how they are addressed in their analyses and what criteria, factors, and indicators of the aspects that are employed. Apart from the revelation that the concept of SEP has been included within high-quality scientific literature for less than ten years, SEP seems to be an unexploited tool with the potential to... [more]
8487. LAPSE:2023.27002
Vacuum-Free Fabrication Strategies for Nanostructure-Embedded Ultrathin Substrate in Flexible Polymer Solar Cells
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: epoxy, nanograting patterns, non-vacuum process, patterned substrate, polyvinyl alcohol, ultrathin polymer solar cells
In this paper, we discuss a method for fabricating an ultrathin polymer substrate with one-dimensional nanograting patterns to improve the power conversion efficiency (PCE) of ultrathin polymer solar cells (PSCs) and suppress the dependence on the incident angle of light. Because the fabricating process of the ultrathin polymer substrate was carried out using a solution process, it can be manufactured in a large area, and the PCE of the patterned ultrathin substrate-based PSC is improved by 8.9% compared to the non-patterned device. In addition, triple-patterned ultrathin PSCs incorporating the same nanograting pattern as the substrate were fabricated in the electron transport (ZnO) layer and the photoactive layer (PBDTTT-OFT and PC71BM mixture (ratio-1: 1.5)) to achieve PCE of 10.26%. Thanks to the nanograting pattern introduced in the substrate, ZnO layer, and photoactive layer, it was possible to minimize the PCE change according to the incident angle of light. Moreover, we performe... [more]
8488. LAPSE:2023.27001
A Tandem Axial-Piston Unit Based Strategy for the Reduction of Noise Sources in Hydraulic Systems
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: axial-piston machine, destructive interference, flow ripple, fluid borne noise, passive vibration reduction
This article presents a novel passive fluid borne noise source reduction strategy, based on tandem axial-piston unit indexing with the usage of symmetric lines. The strategy consists of setting the phase between the two synchronous units to accomplish destructive interference in targeted unit harmonics. A strategy capable of achieving destructive interference in all odd harmonics is investigated first analytically and then confirmed by a simulation study. Experiments on the proposed strategy confirmed its effectiveness at the first and third pump fundamental harmonics, and pressure ripple reduction was accomplished. The fluid borne noise source reduction in the first and third harmonic is verified to be propagated to pipe vibration and sound power. Regarding the first harmonic, pressure ripple was reduced by up to 18 dB; while for third harmonic, pressure ripple was reduced by up to 11 dB. In the experiment, however, noise cancellation is not achieved for the higher odd harmonics, as i... [more]
8489. LAPSE:2023.27000
A Comparative Analysis of Two Cable Yarder Technologies Performing Thinning Operations on a 33 Year Old Pine Plantation: A Potential Source of Wood for Energy
April 3, 2023 (v1)
Subject: Process Operations
Keywords: cable yarder, CO2 emission, Energy Efficiency, fuelwood, pine plantations, time study
In central Italy, there are extensive European black pine (Pinus nigra Arn.) plantations which range from 30 to 60 years of age and where no thinning operations have been made. The main purpose of this study was to provide a comparative analysis of two cable yarder technologies (Maxwald, mobile pulley carriage and Savall, semi-automatic carriage), in terms of fuelwood production and cost, from the first thinning of a 33 year old plantation in slope areas of these plantations. The results showed that fuelwood production was cost-effective in both systems (Savall by 15.1 and Maxwald by 14.8 € m−3), although the productivity of the Savall system was higher than the Maxwald system (6.1 vs. 5.7 m3 h−1). The respect amounts of productivity have the potential to increase by 27% for the Savall yarder and 25% for the Maxwald yarder upon condition that the delay times are reduced to minimum level by proper training of workers, by a better organization, and planning of operations. The total effec... [more]
8490. LAPSE:2023.26999
A Review of the Measures and Instruments to Promote Efficiency and Renewable Energy in Domestic Water Heating
April 3, 2023 (v1)
Subject: Energy Policy
Keywords: climate change mitigation, climate policy, domestic hot water, Energy Efficiency, policy instruments, policy making, water heating
This paper identifies and characterizes the technical measures and policy instruments that can be used to promote energy efficiency and the use of renewable sources for domestic hot water (DHW). DHW presents a considerable potential for abatement of greenhouse gas emissions around the world. Measures were characterized in terms of level of transformation, impact and scope, among others. Policy instruments were characterized in terms of target groups, competences required for implementation, major challenges and nature of the instruments. A matrix showing the applicability of policy instruments per technical measure was derived, enabling policy makersto better choose articulated measures and policy instruments for their policy packs.
8491. LAPSE:2023.26998
Historic Building Thermal Diagnostics Algorithm Presented for the Example of a Townhouse in Lviv
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: building diagnostics, historical buildings, internal thermal insulation, thermal bridges
This paper presents a proposal for a historic building thermal diagnostics algorithm for the example of a historical townhouse located in Lviv, Ukraine. The authors proposed a testing and diagnostics procedure that should precede design and renovation work associated with improving the energy standard of the buildings under discussion. The procedure was presented using a case study of a selected historical building. The scope of the study included an assessment of the building’s technical condition, thermal vision diagnostics, wall moisture, and water absorption in the context of protection against rain. Sample thermal and hygrothermal calculations were performed for a sample architecture element. The calculations included simulations of partition envelope behaviour after planned thermal retrofitting had been carried out. Performing the presented thermal diagnostics methods in three interlinked blocks (A, B, and C) shall ensure the proper thermal retrofitting of historical buildings in... [more]
8492. LAPSE:2023.26997
Impact of Lithium Salts on the Combustion Characteristics of Electrolyte under Diverse Pressures
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: combustion characteristic, cone calorimeter, electrolyte, Lithium-ion battery, low pressure
The electrolyte is one of the components that releases the most heat during the thermal runaway (TR) and combustion process of lithium-ion batteries (LIBs). Therefore, the thermal hazard of the electrolyte has a significant impact on the safety of LIBs. In this paper, the combustion characteristics of the electrolyte such as parameters of heat release rate (HRR), mass loss rate (MLR) and total heat release (THR) have been investigated and analyzed. In order to meet the current demand of plateau sections with low-pressure and low-oxygen areas on LIBs, an electrolyte with the most commonly used lithium salts, LiPF6, was chosen as the experimental sample. Due to the superior low-temperature performance, an electrolyte containing LiBF4 was also selected to be compared with the LiPF6 sample. Combustion experiments were conducted for electrolyte pool fire under various altitudes. According to the experimental results, both the average and peak values of MLR in the stable combustion stage of... [more]
[0.07 s]

