Browse
Records Added in April 2023
Records added in April 2023
Change month: January | February | March | April | May | June | July | August | September | October | November | December
8518. LAPSE:2023.26971
Effects of Reservoir Parameters on Separation Behaviors of the Spiral Separator for Purifying Natural Gas Hydrate
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: desanding spiral separator, natural gas hydrate, numerical simulation, reservoir parameters, separation performance
The spiral separator is an important tool for desanding in natural gas hydrate production, and the change of hydrate reservoir parameters has a great impact on spiral separator behavior. Mastering the influence law is helpful to improve the separation performance. Until now, there was still no detailed analysis of the effect mechanism between reservoir parameters and spiral separator behavior. In this paper, a downhole spiral separator was designed. Then, the effects of reservoir parameters (particle size, hydrate, volume fraction, and sand volume fraction) on separation performance (discrete phase distribution, separation efficiency, and differential pressure) with different flow rates were investigated by numerical simulation method Fluent 18.0. The results show that effects degree of reservoir parameters is in order from large to small: sand phase volume fraction, particle size, hydrate volume fraction. As the particle size increases, the separation performance is improved. When the... [more]
8519. LAPSE:2023.26970
Crop Residue Removal: Assessment of Future Bioenergy Generation Potential and Agro-Environmental Limitations Based on a Case Study of Ukraine
April 3, 2023 (v1)
Subject: Environment
Keywords: bioenergy, cereals, crop residue, generation potential, GLOBIOM model, industrial crops, residue-to-product ratio, soil nutrient balance, Ukraine
This study assesses the bioenergy generation potential of crop residues in Ukraine for the year 2030. Projections of agricultural development are made based on the Global Biosphere Management Model (GLOBIOM) and verified against available Agricultural Member State Modeling (AGMEMOD) results in regard to the six main crops cultivated in Ukraine (wheat, barley, corn, sunflower, rape and soya). Two agricultural development scenarios are assessed (traditional and innovative), facilitating the projection of future crop production volumes and yields for the selected crops. To improve precision in defining agro-environmental limitations (the share of crop residues necessary to be kept on the fields to maintain soil fertility for the continuous cultivation of crops), yield-dependent residue-to-product ratios (RPRs) were applied and the levels of available soil nutrients for regions of Ukraine (in regard to nitrogen, phosphorus, potassium and humus) were estimated. The results reveal the econom... [more]
8520. LAPSE:2023.26969
Evaluating the Struvite Recovered from Anaerobic Digestate in a Farm Bio-Refinery as a Slow-Release Fertiliser
April 3, 2023 (v1)
Subject: Food & Agricultural Processes
Keywords: biogas plant, farm bio-refinery, fertiliser value, P and N recovery, struvite
Biogas production in agricultural biogas plants generates digestate—liquid waste containing organic matter and mineral nutrients. Utilisation of the digestate on farm fields adjacent to the biogas plants is limited. Therefore, bio-refineries implement advanced forms of digestate processing, including precipitation of struvite (MgNH4PO4.6H2O). Struvite can be transported over long distances and dosed precisely to meet the nutritional needs of the plants. Divergent opinions on the fertilising value of struvite and its function over time call for further research on its effects on crop yields in the first and subsequent years after application. This study investigates the effects of struvite (STR), struvite with ammonium sulphate (STR + N), and commercial ammonium phosphate (AP) on the yields, nutrient concentration in the crops, nutrient uptake by the crops, and soil N, P, and Mg content in the second growing period after the application of fertilisers to silty loam (SL) and loamy sand (... [more]
8521. LAPSE:2023.26968
Driving Mode Optimization for Hybrid Trucks Using Road and Traffic Preview Data
April 3, 2023 (v1)
Subject: Optimization
Keywords: eco-driving, hybrid minimum principle, hybrid vehicle
This paper proposes a predictive driver coaching (PDC) system for fuel economy driving for hybrid electric trucks using upcoming static map and dynamic traffic data. Unlike traditional methods that optimize over engine torque and brake to obtain a speed profile, we propose to optimize over driving modes of trucks to achieve a trade-off between fuel consumption and trip time. The optimal driving mode is provided to the driver as a coaching recommendation. To obtain the optimal solution, the truck dynamics are firstly modeled as a hybrid controlled switching dynamical system with autonomous subsystems and then a hybrid optimal control problem (HOCP) is formulated. The problem is solved using an algorithm based on discrete hybrid minimum principle. A warm-start strategy to reduce algorithmic iterations is used by employing a shrinking horizon strategy. In addition, an extensive analysis of the proposed algorithm is provided. We prove that the the coasting mode is never optimal given the t... [more]
8522. LAPSE:2023.26967
Numerical Investigation of the Effect of Partially Propped Fracture Closure on Gas Production in Fractured Shale Reservoirs
April 3, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: embedded discrete fracture model, extended finite element method, fractured shale reservoir, hydro-mechanical coupling, nonuniform proppant distribution, partially propped fracture closure
Nonuniform proppant distribution is fairly common in hydraulic fractures, and different closure behaviors of the propped and unpropped fractures have been observed in lots of physical experiments. However, the modeling of partially propped fracture closure is rarely performed, and its effect on gas production is not well understood as a result of previous studies. In this paper, a fully coupled fluid flow and geomechanics model is developed to simulate partially propped fracture closure, and to examine its effect on gas production in fractured shale reservoirs. Specifically, an efficient hybrid model, which consists of a single porosity model, a multiple porosity model and the embedded discrete fracture model (EDFM), is adopted to model the hydro-mechanical coupling process in fractured shale reservoirs. In flow equations, the Klinkenberg effect is considered in gas apparent permeability, and adsorption/desorption is treated as an additional source term. In the geomechanical domain, th... [more]
8523. LAPSE:2023.26966
Influence of the Phenomenon of Spectrum Leakage on the Evaluation Process of Metrological Properties of Power Quality Analyser
April 3, 2023 (v1)
Subject: Energy Management
Keywords: FFT, harmonics, measurement window, power quality analyser, spectrum leakage, uncertainty budget
Power quality assessment is a complex measurement task, requiring the usage of a system with suitable metrological properties. This complex measurement task in the real power grid is performed with the use of power quality analysers that measure and record the parameters determining the power quality. The paper presents selected research results for a class A power quality analyser in the specially prepared measurement system containing measuring instruments calibrated by the Main Office of Measures. The measurement results were completed with a presentation of the uncertainty budget. The influence of the phenomenon of spectrum leakage on metrological properties of the tested power quality analyser was considered in the paper. To assess this influence, the simulation studies with the use of MATLAB and the experimental studies were carried out for selected test signals. The Metrological interpretation of the research results is presented in the paper.
8524. LAPSE:2023.26965
Study of Visualization Experiment on the Influence of Injector Nozzle Diameter on Diesel Engine Spray Ignition and Combustion Characteristics
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: constant volume combustion vessel, evaporative spray, flame luminosity, flame-wall impinging combustion, visualization experiment
The elementary research of spray and combustion is of great significance to the development of compactness of modern diesel engines. In this paper, three injectors with different nozzle orifice diameters (0.23 mm, 0.27 mm and 0.31 mm) were used to study the diesel spray, ignition and flame-wall impingement visualization experiment. This paper studied the influence of different nozzle sizes on the trends of spray, ignition and flame diffusion under the flame-wall impinging combustion and used the flame luminosity to characterize the soot generation in combustion. By analyzing the quantitative data, such as spray penetration, ignition delay, flame area and flame luminosity systematically, it was shown that the smaller nozzle benefitted diesel combustion to some extent. The 0.23 mm nozzle injector in these experiments had the best fuel-air mixing effect under 800 K. The length of the spray liquid under the 0.23 mm nozzle condition was 19% and 23% shorter than that of 0.27 and 0.31 mm, res... [more]
8525. LAPSE:2023.26964
Analysing the Drivers of Electricity Demand in Spain after the Economic Crisis
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: econometric modeling, electricity demand, households, Spain
Electricity provides a crucial service in our daily lives. However, in electricity systems mostly based on conventional, fossil-fuel fired technologies, an increase in electricity demand also leads to higher greenhouse gas emissions and, in countries without fossil-fuel resources, also increases their dependence on foreign energy sources. In more decarbonised electricity systems, with a high penetration of variable renewable energy sources, strong increases in electricity demand lead to higher system costs, given the need for back-up. Therefore, identifying the drivers of electricity demand is an academically-relevant, but also a policy-relevant exercise, since specific policy measures can be linked to those drivers. The aim of this paper is to assess the drivers of electricity demand in Spain in the period immediately after the economic crisis (2013−2017), with the help of a unique database of Spanish households and econometric modeling. Our results show that electricity demand in thi... [more]
8526. LAPSE:2023.26963
Research on the Influence of Euro VI Diesel Engine Assembly Consistency on NOx Emissions
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: assembly consistency, diesel engine, NOx emissions, numerical simulation
The assembly consistency of a diesel engine will affect its nitrogen oxides (NOx) emission variation. In order to improve the NOx emissions of diesel engines, a study was carried out based on the assembly tolerance variation of the diesel engine’s combustion system. Firstly, a diesel engine which meets the Euro VI standards together with the experimental data is obtained. The mesh model and combustion model of the engine combustion system are built in the Converge software (version 2.4, Tecplot, Bellevue, DC, USA), and the experimental data is used to calibrate the combustion model obtained in the Converge software. Then, the four-factor and three-level orthogonal simulation experiments are carried out on the dimension parameters that include nozzle extension height, throat diameter, shrinkage diameter and combustion chamber depth. Through mathematical analysis on the experimental data, the results show that the variation of nozzle extension height and combustion chamber depth have a s... [more]
8527. LAPSE:2023.26962
Hybrid Adaptive Control for PEMFC Gas Pressure
April 3, 2023 (v1)
Subject: Process Control
Keywords: adaptive control, intelligent optimizing algorithm, membrane, pressure difference, proton exchange membrane fuel cell
This paper addresses the issues of nonlinearity and coupling between anode pressure and cathode pressure in proton exchange membrane fuel cell (PEMFC) gas supply systems. A fuzzy adaptive PI decoupling control strategy with an improved advanced genetic algorithm (AGA) is proposed. This AGA s utilized to optimize the PI parameters offline, and the fuzzy adaptive algorithm s used to adjust the PI parameters dynamically online to achieve the approximate decoupling control of the PEMFC gas supply system. According to the proposed dynamic model, the PEMFC gas supply system with the fuzzy−AGA−PI decoupling control method was simulated for comparison. The simulation results demonstrate that the proposed control system can reduce the pressure difference more efficiently with the classical control method under different load changes.
8528. LAPSE:2023.26961
Development of Changeover Operating Method Based on Performance Prediction of Hybrid Geothermal Heat Pump Systems through Field Test and Numerical Analysis
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: changeover operating method, field test, hybrid geothermal heat pump system, performance prediction
The installation and operation of geothermal systems increased due to the expectation of good cooling and heating performance due to stable heat source temperatures. In actual geothermal system operations, heat source temperature rises or falls due to an imbalance of heating and cooling energy usage. Problems of source side temperature result in reduced geothermal system performance. The purpose of this study is to develop hybrid geothermal system operation technology to stabilize temperature and improve system performance by utilizing auxiliary heat source system. The auxiliary heat source system is operated by comparing the performance when operating the geothermal heat pump system alone and the performance when operating the hybrid geothermal heat pump system. The performance of a hybrid geothermal system is determined by the circulating water temperature of the geothermal system and the circulating water temperature of the auxiliary heat source system. Hybrid geothermal heat pump s... [more]
8529. LAPSE:2023.26960
Impact of Passive Cooling on Thermal Comfort in a Single-Family Building for Current and Future Climate Conditions
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: building simulation, climate change, EnergyPlus, passive cooling, thermal comfort
Today, there is a great deal of emphasis on reducing energy use in buildings for both economic and environmental reasons. Investors strongly encourage the insulating of buildings. Buildings without cooling systems can lead to a deterioration in thermal comfort, even in transitional climate areas. In this article, the effectiveness of natural ventilation in a passive cooling building is analyzed. Two options are considered: cooling with external air supplied to the building by fans, or by opening windows (automatically or by residents). In both cases, fuzzy controllers for the cooling time and supply airflow control are proposed and optimized. The analysis refers to a typical Polish single-family building. Simulations are made with the use of the EnergyPlus program, and the model is validated based on indoor temperature measurement. The calculations were carried out for different climate data: standard and future (warmed) weather data. Research has shown that cooling with external air c... [more]
8530. LAPSE:2023.26959
Nonlinear Active Disturbance Rejection Control of VGT-EGR System in Diesel Engines
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: diesel engine, exhaust gas recirculation, nonlinear active disturbance rejection controller, variable geometry turbine
In this paper, a nonlinear active disturbance rejection control (NLADRC) strategy based on nonlinear extended state observer (NLESO) is proposed to solve the unmodeled dynamics, coupling and disturbance due to change of working point in the variable geometry turbine (VGT) and exhaust gas recirculation (EGR) system, so as to achieve accurate control of intake manifold pressure and mass air flow in a diesel engine. To achieve decoupling, the double-input double-output (DIDO) VGT-EGR system is decomposed into two single-input single-output (SISO) subsystems, and each subsystem has a separate nonlinear active disturbance rejection controller. At the same time, the convergence proof of the designed NLESO is also given theoretically. Finally, the NLADRC controller is compared with linear active disturbance rejection controller and proportional−integral−derivative (PID) controller. Through simulation, it is indicated that the proposed NLADRC controller has better transient response performanc... [more]
8531. LAPSE:2023.26958
PV Forecast for the Optimal Operation of the Medium Voltage Distribution Network: A Real-Life Implementation on a Large Scale Pilot
April 3, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: Machine Learning, online forecast, PV forecast, random forests, real-life implementation, statistical methods
The goal of the paper is to develop an online forecasting procedure to be adopted within the H2020 InteGRIDy project, where the main objective is to use the photovoltaic (PV) forecast for optimizing the configuration of a distribution network (DN). Real-time measurements are obtained and saved for nine photovoltaic plants in a database, together with numerical weather predictions supplied from a commercial weather forecasting service. Adopting several error metrics as a performance index, as well as a historical data set for one of the plants on the DN, a preliminary analysis is performed investigating multiple statistical methods, with the objective of finding the most suitable one in terms of accuracy and computational effort. Hourly forecasts are performed each 6 h, for a horizon of 72 h. Having found the random forest method as the most suitable one, further hyper-parameter tuning of the algorithm was performed to improve performance. Optimal results with respect to normalized root... [more]
8532. LAPSE:2023.26957
Mechanical Harvesting of Camelina: Work Productivity, Costs and Seed Loss Evaluation
April 3, 2023 (v1)
Subject: Materials
Keywords: bioenergy, harvesting loss, oil crops, work performance
Camelina is a low input crop than can be cultivated in rotation with cereals to provide vegetable oil suitable for bioenergy production, industrial applications and even as source of food for livestock. At large scale farming, camelina seeds are currently harvested using a combine harvester, equipped with a cereal header, but the literature still lacks the knowledge of the performance of the machine, the harvesting cost and the related loss of seeds. The present study aims to fulfill that gap by reporting the results obtained from an ad hoc harvest field test. Camelina seed yield was 0.95 Mg ha−1 which accounted for the 18.60% of the total above ground biomass. Theoretical field capacity, effective field capacity and field efficiency were 3.38 ha h−1, 3.17 ha h−1 and 93.7% respectively, albeit the seed loss was 80.1 kg ha−1 FM (7.82% w/w of the potential seed yield). The presence of material other than grain was rather high, 31.77% w/w, which implies a second step of cleaning to avoid... [more]
8533. LAPSE:2023.26956
A Single Scalable LSTM Model for Short-Term Forecasting of Massive Electricity Time Series
April 3, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: disaggregated time series, load forecasting, neural networks, smart meters
Most electricity systems worldwide are deploying advanced metering infrastructures to collect relevant operational data. In particular, smart meters allow tracking electricity load consumption at a very disaggregated level and at high frequency rates. This data opens the possibility of developing new forecasting models with a potential positive impact on electricity systems. We present a general methodology that can process and forecast many smart-meter time series. Instead of using traditional and univariate approaches, we develop a single but complex recurrent neural-network model with long short-term memory that can capture individual consumption patterns and consumptions from different households. The resulting model can accurately predict future loads (short-term) of individual consumers, even if these were not included in the original training set. This entails a great potential for large-scale applications as once the single network is trained, accurate individual forecast for n... [more]
8534. LAPSE:2023.26955
Predictive Trajectory Control with Online MTPA Calculation and Minimization of the Inner Torque Ripple for Permanent-Magnet Synchronous Machines
April 3, 2023 (v1)
Subject: Process Control
Keywords: online maximum torque per current, optimal control, permanent-magnet synchronous machine, predictive control, torque ripple minimization, trajectory control
This paper presents an extended predictive trajectory control scheme combined with an inner torque ripple minimization considering the current-, flux-linkage-, and voltage-planes of permanent magnet synchronous machines. The extension of a fundamental machine model with flux-linkage harmonics allows the calculation of the inner torque ripple and enables its minimization. For this, the control is divided in two cases: (1) The dynamic operation or large signal behavior which uses the maximal torque gradient for the trajectory strategy during each control period for fastest dynamic operation, and (2) The stationary operation or small signal behavior, utilizing a real time capable polynomial approximation of the rotor position dependent torque hyperbolas (iso-torque curves) of permanent magnet synchronous machines for the ideal torque to current reference values. Since dynamic and steady-state operation is covered, torque to current look-up tables, such as maximum torque per ampere (MTPA)/... [more]
8535. LAPSE:2023.26954
Towards a Tidal Farm in Banks Strait, Tasmania: Influence of Tidal Array on Hydrodynamics
April 3, 2023 (v1)
Subject: Environment
Keywords: environmental impact assessment, hydrodynamic model, tidal energy, tidal farm
The development of tidal energy in Australia is still a challenge with few studies performed on the characterisation of the resource, due to the difficulty to acquire data and uncertainties about the influence of this anthropogenic activity on the marine environment. Changes in flow could lead to alterations in sediment transport and have further influence on the marine habitat. A case study in a promising area, Banks Strait (Australia), was created using high resolution 2D and 3D models validated against in situ data to investigate changes to hydrodynamic conditions with two scenarios of tidal farms (100 and 300 turbines). Comparison between 2D and 3D is performed to find the best compromise between model accuracy and computational time for preliminary assessment. Changes to current speed and bed shear stress over a 35 day period were found to be localised around the tidal farms and did not extent more than 7 km from the farm (300 turbines) for both 2D and 3D. The results showed that... [more]
8536. LAPSE:2023.26953
Neutron Activation of Structural Materials of a Dry Storage System for Spent Nuclear Fuel and Implications for Radioactive Waste Management
April 3, 2023 (v1)
Subject: Materials
Keywords: decommissioning, dry storage system, neutron activation, radioactive waste management, spent nuclear fuel
In order to estimate the radiological characteristics of disused dry storage systems for spent nuclear fuel, a stepwise framework to calculate neutron sources (ORIGEN-ARP), incident neutron flux and reaction rate (MCNPX), effective cross-section (hand calculation), and residual activity (ORIGEN-2) was established. Applicability of the framework was demonstrated by comparing the residual activity of a commercialized storage system, HI-STORM 100, listed in the safety analysis report and calculated in this study. For a reference case assuming an impurity-free storage system, the modified effective cross-sections were theoretically interpreted and the need for managing disused components as a radioactive waste for at least four years was demonstrated. Sensitivity analyses showed that the higher burnup induces the higher residual radioactivity, and the impurity 59Co may extend the minimum decay-in-storage period up to 51 years within the reported range of 59Co content in stainless steel. Th... [more]
8537. LAPSE:2023.26952
Reverse Water−Gas Shift Chemical Looping Using a Core−Shell Structured Perovskite Oxygen Carrier
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: core–shell, metal oxide, oxygen carrier, perovskite, reverse water–gas shift chemical looping (RWGS-CL)
Reverse water−gas shift chemical looping (RWGS-CL) offers a promising means of converting the greenhouse gas of CO2 to CO because of its relatively low operating temperatures and high CO selectivity without any side product. This paper introduces a core−shell structured oxygen carrier for RWGS-CL. The prepared oxygen carrier consists of a metal oxide core and perovskite shell, which was confirmed by inductively coupled plasma mass spectroscopy (ICP-MS), XPS, and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) measurements. The perovskite-structured shell of the prepared oxygen carrier facilitates the formation and consumption of oxygen defects in the metal oxide core during H2-CO2 redox looping cycles. As a result, amounts of CO produced per unit weight of the core−shell structured oxygen carriers were higher than that of a simple perovskite oxygen carrier. Of the metal oxide cores tested, CeO2, NiO, Co3O4, and Co3O4-NiO, La0.75Sr0.25FeO3-encapsulat... [more]
8538. LAPSE:2023.26951
The Impact of Implied Volatility Fluctuations on Vertical Spread Option Strategies: The Case of WTI Crude Oil Market
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: crude oil price risk, implied volatility, vertical spread option strategies
This paper aims to analyze the impact of implied volatility on the costs, break-even points (BEPs), and the final results of the vertical spread option strategies (vertical spreads). We considered two main groups of vertical spreads: with limited and unlimited profits. The strategy with limited profits was divided into net credit spread and net debit spread. The analysis takes into account West Texas Intermediate (WTI) crude oil options listed on New York Mercantile Exchange (NYMEX) from 17 November 2008 to 15 April 2020. Our findings suggest that the unlimited vertical spreads were executed with profits less frequently than the limited vertical spreads in each of the considered categories of implied volatility. Nonetheless, the advantage of unlimited strategies was observed for substantial oil price movements (above 10%) when the rates of return on these strategies were higher than for limited strategies. With small price movements (lower than 5%), the net credit spread strategies wer... [more]
8539. LAPSE:2023.26950
Analysis of Open-Circuit Fault in Fault-Tolerant BLDC Motors with Different Winding Configurations
April 3, 2023 (v1)
Subject: Other
Keywords: brushless direct current motor with permanent magnet (BLDCM), delta, fault states, FFT, neutral-point voltage, open circuit (OC), star, star–delta, winding configurations
In this study, tests were carried out on a brushless permanent magnet DC motor with different winding configurations. Three configurations were compared: star, delta and combined star−delta. A mathematical model was constructed for the motor, taking into account the different winding configurations. An analysis of the operation of the motor in the different configurations was performed, based on numerical calculations. The use of different winding configurations affects the properties of the motor. This is significant in the case of the occurrence of various fault states. Based on numerical calculations, an analysis of an open-circuit fault in one of the phases of the motor was performed. Fast Fourier Transform—FFT analysis of the artificial neutral-point voltage was used for the detection of fault states. The results were verified by tests carried out under laboratory conditions. It was shown that the winding configuration has an impact on the behaviour of the motor in the case of an... [more]
8540. LAPSE:2023.26949
An Adaptive Protection for Radial AC Microgrid Using IEC 61850 Communication Standard: Algorithm Proposal Using Offline Simulations
April 3, 2023 (v1)
Subject: Modelling and Simulations
Keywords: AC microgrid, adaptive protection, IEC 61850 GOOSE protocol, substation automation
The IEC 61850 communication standard is getting popular for application in electric power substation automation. This paper focuses on the potential application of the IEC 61850 generic object-oriented substation event (GOOSE) protocol in the AC microgrid for adaptive protection. The focus of the paper is to utilize the existing low-voltage ride through characteristic of distributed generators (DGs) with a reactive power supply during faults and communication between intelligent electronic devices (IEDs) at different locations for adaptive overcurrent protection. The adaptive overcurrent IEDs detect the faults with two different preplanned settings groups: lower settings for the islanded mode and higher settings for the grid-connected mode considering limited fault contributions from the converter-based DGs. Setting groups are changed to lower values quickly using the circuit breaker status signal (XCBR) after loss-of-mains, loss-of-DG or islanding is detected. The methods of fault det... [more]
8541. LAPSE:2023.26948
Thermal Assessment of Power Cables and Impacts on Cable Current Rating: An Overview
April 3, 2023 (v1)
Subject: Energy Systems
Keywords: cable rating, electric cables, finite difference method, finite element method, harmonic distortion, heat transfer, probabilistic models, thermal model
The conceptual assessment of the rating conditions of power cables was addressed over one century ago, with theories based on the physical and heat transfer properties of the power cable installed in a given medium. During the years, the evolution of the computational methods and technologies has made more powerful means for executing the calculations available. More detailed configurations have been analysed, also moving from the steady-state to dynamic rating assessment. The research is in progress, with recent advances obtained on both advanced models, extensive calculations from 2D and 3D finite element methods, simplified approaches aimed at reducing the computational burden, and dedicated solutions for specific types of cables and applications. This paper provides a general overview that links the fundamental concepts of heat transfer for the calculation of cable rating to the advanced solutions that have emerged in the last years.
8542. LAPSE:2023.26947
Performance Evaluation of Energy Research Projects Using DEA Super-Efficiency
April 3, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: data envelopment analysis, energy research project, performance evaluation, skewing problem, super-efficiency
This study proposes super efficiency (SE) as an efficient analytical method for evaluating the performance of energy research projects. Because the SE method is based on data envelopment analysis (DEA), it is free from the difficulty of weighting output, allows for the use of variables with diverse standards of measurement, and is capable of providing ranking information that regular DEA (CCR, BCC) analysis techniques cannot. To analyze the feasibility of the DEA-SE method, an efficiency evaluation was performed for energy research projects using both the weighting method as an existing method and the SE method. When the results were compared and analyzed, skewing toward particular output types was observed in the weighting method, owing to problems inherent in the method itself and in the weighting of subordinate variables that make up the total performance score. Therefore, adopting DEA-SE will redress the known problems of the weighting method by minimizing the problems of weighting... [more]
[0.21 s]

