Functional materials, in the combination of lignocelluloses, known as natural fibers, with oxide materials, can result in cultivating functional properties such as flexibility, relativity good electrical conduction, good electrical charge storage capacity, and tunable electric permittivity. This study presents the morphological, dielectric, and impedance properties of lignocellulose−lead oxide (LC/PbO2) composite sheets electrodeposited with silver metallic nanoparticles for various time spans. The uncoated samples show a rather simple behavior where the impedance data fit well to the two-system model with different relaxation times. On the other side, the impedance spectra of the electrodeposited sample have varying features, which mainly depend upon the deposition thickness of the Ag particles. The common feature is the drift of conductive species, as seen from the straight-line behavior in the Nyquist plots, which were fitted using a Warburg element in the equivalent circuit model.

The enormous number of automobiles across the world has caused a significant increase in emissions of greenhouse gases, which pose a grave and mounting threat to modern life by escalating global warming and polluting air quality. These adverse effects of climate change have motivated the automotive sector to reform and have pushed the drive towards the transformation to fully electric. Charging time has been identified as one of the key barriers in large-scale applications of Electric Vehicles (EVs). In addition, various challenges are associated with the formulation of a safe charging scheme, which is concerned with appropriate charging converter architecture, with the aim of ensuring a safe charging protocol within a range of 5−10 min. This paper provides a systematic review of thharging technologies and their impacts on battery systems, including charger converter design and associated limitations. Furthermore, the knowledge gap and research directions are provided with regard to th... [more]

The proposed anthraquinone-bromate cell combines the advantages of anthraquinone-bromine redox flow batteries and novel hybrid hydrogen-bromate flow batteries. The anthraquinone-2,7-disulfonic acid is of interest as a promising organic negolyte due its high solubility, rapid kinetics of electrode reactions and suitable redox potentials combined with a high chemical stability during redox reactions. Lithium or sodium bromates as posolytes provide an anomalously high discharge current density of order ~A cm−2 due to a novel autocatalytic mechanism. Combining these two systems, we developed a single cell of novel anthraquinone-bromate flow battery, which showed a power density of 1.08 W cm−2, energy density of 16.1 W h L−1 and energy efficiency of 72% after 10 charge−discharge cycles.

This paper numerically models the thermal performance of offshore hydro-pneumatic energy storage (HPES) systems composed of a subsea accumulator pre-charged with a compressed gas. A time-marching numerical approach combining the first law of thermodynamics with heat transfer equations is used to investigate the influence of replacing air within an HPES system with carbon dioxide (CO2). The latter is able to experience a phase change (gas−liquid−gas) during the storage cycle in typical subsea temperatures when limiting the peak operating pressure below the critical point. The influences of integrating a piston and an inner liner within the accumulator to mitigate issues related to gas dissolution in seawater and corrosion are explored. It is found that the energy storage capacity of subsea HPES accumulators increases substantially when CO2 is used as the compressible fluid in lieu of air, irrespective of the accumulator set up. It is also noted that the length-to-diameter ratio of the a... [more]

Due to their attractive properties, such as high energy and power density, Lithium-ion batteries are currently the most suitable energy storage system for powering portable electronic equipment, electric vehicles, etc. However, they are still affected by safety and stability problems that need to be solved to allow a wider range of applications, especially for critical areas such as power networks and aeronautics. In this paper, the issue of overdischarge abuse has been addressed on Lithium-ion cells with different anode materials: a graphite-based anode and a Lithium Titanate Oxide (LTO)-based anode model. Tests were carried out at different depths of discharge (DOD%) in order to determine the effect of DOD% on cell performance and the critical conditions that often make the cell fail irreversibly. Tests on graphite anode cells have shown that at DOD% higher than 110% the cell is damaged irreversibly; while at DOD% lower than 110% electrolyte deposits form on the anodic surface and st... [more]

The importance of renewable energies and energy storage system forming a micro-grid and integrating it to the electrical grid is widely spread. A supervisory system plays a crucial role in controlling, managing, and planning the micro-grid. This paper demonstrates the development of a new custom supervisory system based on Internet of Things (IoT), creating an information sharing environment. The proposed supervisory system is based on open-source tools for a micro-grid, composed of a photovoltaic power plant and a storage system, employing smart devices and making non-smart devices compatible with IoT systems. The new supervisory improves the available system by incorporating new features and devices and increasing the data polling rate when necessary. A comparison between the current supervisory system and the proposed one is performed, showing that the new system is more flexible, easily modified, cost-effective, and more fault-resilient.

Power electronic systems have a great impact on modern society. Their applications target a more sustainable future by minimizing the negative impacts of industrialization on the environment, such as global warming effects and greenhouse gas emission. Power devices based on wide band gap (WBG) material have the potential to deliver a paradigm shift in regard to energy efficiency and working with respect to the devices based on mature silicon (Si). Gallium nitride (GaN) and silicon carbide (SiC) have been treated as one of the most promising WBG materials that allow the performance limits of matured Si switching devices to be significantly exceeded. WBG-based power devices enable fast switching with lower power losses at higher switching frequency and hence, allow the development of high power density and high efficiency power converters. This paper reviews popular SiC and GaN power devices, discusses the associated merits and challenges, and finally their applications in power electron... [more]

The energy sector is nowadays facing new challenges, mainly in the form of a massive shifting towards renewable energy sources as an alternative to fossil fuels and a diffusion of the distributed generation paradigm, which involves the application of small-scale energy generation systems. In this scenario, systems adopting one or more renewable energy sources and capable of producing several forms of energy along with some useful substances, such as fresh water and hydrogen, are a particularly interesting solution. A hybrid polygeneration system based on renewable energy sources can overcome operation problems regarding energy systems where only one energy source is used (solar, wind, biomass) and allows one to use an all-in-one integrated systems in order to match the different loads of a utility. From the point of view of scientific literature, medium- and large-scale systems are the most investigated; nevertheless, more and more attention has also started to be given to small-scale... [more]

Underground salt caverns are widely used in large-scale energy storage, such as natural gas, compressed air, oil, and hydrogen. In order to quickly build large-scale natural gas reserves, an unusual building method was established. The method involves using the existing salt caverns left over from solution mining of salt to build energy storages. In 2007, it was first applied to Jintan Natural Gas Storage of China. Based on this successful project, several existing salt caverns were screened to build energy storages in China. Engineering experience indicates that the key to successful reusing is how to select the most suitable of the numerous available caverns and confirm it. This paper summarizes and reviews relevant theories and testing methods, including: (1) the primary selection principle for using existing salt caverns to build energy storage, (2) the testing method and evaluation theory of tightness of the existing salt cavern, and (3) the typical project case of using the exist... [more]

Near-Zero-Energy Buildings are a challenge in terms of energy production, storage, consumption and management, but these technological solutions remain financially difficult to access in developing countries. To this end, a complete low-cost and reliable home energy-management prototype was first developed and implemented on a scale model. A PWM charge controller drove the flow of energy produced and consumed in order to ensure the optimization of both the consumption of energy and energy savings. Battery storage was also managed by the home automation module using a set of sensors. The prototype of the scale model incorporated complete energy management of all electrical devices with group priorities through a graphical interface in a real-time mode. After testing this system, the lighting management part was implemented in a large-scale smart solar home. A smart lighting system via a complete algorithm integrated on an Arduino Mega board was then realized and implemented in the life-... [more]

Virtual Power Plants (VPPs) are efficient structures for attracting private investment, increasing the penetration of renewable energy and reducing the cost of electricity for consumers. It is expected that the number of VPPs will increase rapidly as their financial return is attractive to investors. VPPs will provide added value to consumers, to power systems and to electricity markets by contributing to different services such as the energy and load-following services. One of the capabilities that will become critical in the near future, when large power plants are retired, is grid-forming capability. This review paper introduces the concept of grid-forming VPPs along with their corresponding technologies and their advantages for the new generation of power systems with many connected VPPs.

Evacuated tube solar water heaters are gaining more attention in the present market scenario as compared to conventional collectors. Such collectors are versatile because no solar tracking is required and the operating temperature range is also broad. Comparatively, it is cost-effective and may attain higher thermal efficiency. However, like other collectors, continuous energy supply is sometimes hampered by the intermittent nature of solar radiation. This problem can be partially resolved by using phase change materials (PCM) in the evacuated tube solar collector (ETC). PCMs can store the energy during the sunshine hours, which can be released when solar energy is not available. In the literature, several studies are available pertaining to the use of PCMs in ETC-based solar water heaters. The literature indicates that the integration of PCMs with ETCs has several merits. Nevertheless, systematic, and comprehensive review papers dedicated to such integrated energy storage systems with... [more]

Aqueous zinc-ion batteries (AZIBs) are being intensively developed as potential alternative electrochemical power sources, due to their advantages such as low cost, high safety, abundance of natural zinc resources and appropriate energy density. Among currently investigated prospective cathode materials for AZIBs, vanadium oxide-based composites with intrinsically conducting polymers have shown many advantages, such as high capacity, high power density and long battery life. This review gives a focused view of the design for the boosting of zinc ion storage performance using intrinsically conducting polymers in vanadium oxide-based composites and the mechanism of intercalation processes. The main challenges in interfacial engineering of vanadium oxide-conducting polymers composite structures and the prospects for further development of such cathode materials are summarized and discussed. The review would give rise to a broad interest focusing on the advantageous strategy of the develop... [more]

Geothermal heating is considered to be one of the low-carbon-energy technologies for building heating. Aiming at the problem that the operating cost and investment cost of geothermal heating systems are still high, the conventional geothermal heating system coupled with energy storage for office building heating is studied in this paper. Four operational strategy models of the coupled system are established based on time-of-use electricity prices. A genetic algorithm is used to find the optimal value of each decision variable using minimization of levelized cost of heat (LCOH) as the objective function. The influences of electricity and equipment prices on the optimal values of the decision variables are discussed. Four operation strategies are investigated. If only operating cost is considered in the optimization, comparison shows that the best operation strategy is the one giving high priority to use the energy storage tank for heating during the peak electricity period. However, if... [more]

The daily non-uniform power demand is a serious problem in power industry. In addition, recent decades show a trend for the transition to renewable power sources, but their power output depends upon weather and daily conditions. These factors determine the urgency of energy accumulation technology research and development. The presence of a wide variety of energy storage mechanisms leads to the need for their classification and comparison as well as a consideration of possible options for their application in modern power units. This paper presents a comparative analysis of energy storage methods for energy systems and complexes. Recommendations are made on the choice of storage technologies for the modern energy industry. The change in the cost of supplied energy at power plants by integrating various energy storage systems is estimated and the technologies for their implementation are considered. It is revealed that in the large-scale power production industry, the most productive ac... [more]

Norwegian offshore wind farms may be able to supply power to offshore oil and gas platforms in the near future thanks to the expeditious development of offshore wind technology. This would result in a reduction in CO2 emissions from oil and gas offshore installations, which are currently powered predominantly by gas turbines. The challenge with using wind power is that offshore oil and gas installations require a fairly constant and stable source of power, whereas wind power typically exhibits significant fluctuations over time. The purpose of this study is to perform a technical feasibility evaluation of using wind power to supply an offshore oil and gas installation on the basis of dynamic process simulations. Throughout the study, only the topside processing system is considered, since it is the most energy-intensive part of an oil and gas facility. An offshore field on the Norwegian Continental Shelf is used as a case study. The results indicate that, when the processing system ope... [more]

Demand-responsive control of electrically heated hot water storage tanks (HWSTs) is one solution, already present in the building stock, to stabilise volatile energy networks and markets. This has been put into sharp focus with the current energy crisis in Europe due to reduced access to natural gas. Furthermore, increasing proportions of intermittent renewable energy will likely add to this volatility. However, the adoption of demand response (DR) by consumers is highly dependent on the economic benefit. This study assesses the economic potential of DR of centralised HWSTs through both an analysis of spot price data and an optimisation algorithm approximating DR control. The methods are applied to a case study apartment building in Norway using current pricing models and examine the effect of the demand profile, electricity prices, heating power and storage capacity on energy cost and energy flexibility. Unit cost savings from DR are closely linked to the variation in unit energy pric... [more]

The uncertainty of high penetration of renewable energy brings challenges to the safe and stable operation of a power system; the virtual synchronous compensation (VSCOM) can shift the demand and compensate real-time discrepancy between generation and demand, and can improve the active support ability for the power system. This paper proposes a novel capacity allocation strategy using VSCOM for renewable energy stations based on fuzzy constraints. Firstly, the basic framework of the VSCOM is constructed with energy storage and reactive power generator (SVG) unit. Secondly, the inertia and standby capacity requirements of high penetration of renewable energy system are modeled; on this basis, a capacity allocation model of each sub unit of the VSCOM is developed, and the investment economy and stable support needs are considered. Thirdly, the uncertainty set of wind power output is defined based on the historical data to find a decision that minimizes the worst-case expected where the w... [more]

A smart grid (SG), considered as a future electricity grid, utilizes bidirectional electricity and information flow to establish automated and widely distributed power generation. The SG provides a delivery network that has distributed energy sources, real-time asset monitoring, increased power quality, increased stability and reliability, and two-way information sharing. Furthermore, SG provides many advantages, such as demand response, distribution automation, optimized use of electricity, economical energy, real-time grid status monitoring, voltage regulation or VAR control, and electricity storage. In this survey, we explore the literature on smart Grid enabling technologies until 2022. We dig out four major systems: (1) the smart grid’s prominent features and challenges; (2) the smart grid standard system and legislations; (3) smart grid energy subsystem; and (4) the smart grid management system and protection system for new researchers for their future projects. The research chal... [more]

Metallic aluminum is widely used in propellants, energy-containing materials, and batteries due to its high energy density. In addition to burning in the air, aluminum can react with water to generate hydrogen. Aluminum is carbon-free and the solid-phase products can be recycled easily after the reaction. Micron aluminum powder is stable in the air and enables global trade. Aluminum metal is considered to be a viable recyclable carrier for clean energy. Based on the reaction characteristics of aluminum fuel in air and water, this work summarizes the energy conversion system of aluminum fuel, the combustion characteristics of aluminum, and the recycling of aluminum. The conversion path and application direction of electric energy and chemistry in the aluminum energy conversion system are described. The reaction properties of aluminum in the air are described, as well as the mode of activation and the effects of the aluminum-water reaction. In situ hydrogen production is achievable throu... [more]

This review comprehensively examines biochar, an essential material in an era of climate change for reducing carbon dioxide (CO2) emissions into the atmosphere. It is inconspicuous, black, lightweight, and very porous, and is produced through the thermal conversion of biomass. Our literature review highlights biochar’s expansive application possibilities. Firstly, its potential to improve soil quality and sequester CO2 has been examined, as well as its utilization in iron and steel manufacturing to minimize the quantity of coke and ultimately reduce CO2 emissions. In industrial manufacturing, the complete elimination of coke can promote environmental neutrality, which is achieved using biochar from biomass for its extrusion. Furthermore, biochar is becoming increasingly significant in modern energy storage technologies and as an important additive in Pickering emulsions, which are also employed in energy storage systems. Additionally, the use of carbon black is a broad topic, and this... [more]

Energy security and the resilience of electricity networks have recently gained critical momentum as subjects of research. The challenges of meeting the increasing electrical energy demands and the decarbonisation efforts necessary to mitigate the effects of climate change have highlighted the importance of microgrids for the effective integration of renewable energy sources. Microgrids have been the focus of research for several years; however, there are still many unresolved challenges that need to be addressed. Energy storage systems are essential elements that provide reliability and stability in microgrids with high penetrations of renewable energy sources. This study provides a systematic review of the recent developments in the control and management of energy storage systems for microgrid applications. In the early sections, a summary of the microgrid topologies and architectures found in the recent literature is given. The main contributions and targeted applications by the en... [more]

This work proposed an optimal design of PV-system-based water-pumped energy storage for both electricity and water supply. A case study was considered in a rural community in Cameroon. The parameters of the assessment of the system were reliability, represented in the present work by the system supply deficiency (SSD), and economic accessibility, represented by the levelized cost of energy (LCOE). The obtained results showed that for 0% SSD, the optimal configuration of the system was composed of 438 PV modules of 235 W, an immersed solar motor pump of 35 kW, a hydroelectric turbine of 51.7 kW, an upper reservoir of 2307.1 m3, an inverter of 25.27 kW, and a total dynamic head of 88 m. The corresponding LCOE to this configuration is 0.224 USD/kWh. The economic accessibility of the designed system was evaluated by comparison with a PV-system-based battery energy storage. The optimal design configuration of the studied PV-system-based battery energy storage was a PV generator (120 PV modu... [more]

Aqueous zinc-ion hybrid supercapacitors (AZHSs) are promising candidates for powering mobile devices due to their intrinsically high safety, the high theoretical capacity of zinc anodes, and the wide range of sources of raw materials for activated carbon (AC) cathodes. Here, we report that there is a synergistic effect between the anions of an AZHS electrolyte, which can significantly improve the specific capacity and rate capability of an AC cathode. The results showed that the specific capacities of the AC cathode//2 M ZnSO4(aq)//Zn anode energy storage system were 115 and 41 mAh g−1 at 0.1 and 5 A g−1 current densities, respectively. The specific capacity at a 0.1 A g−1 current density was enhanced to 136 mAh g−1 by doping 0.5% ZnCl2 and 0.5% Zn(CF3SO3)2 in the 2 M ZnSO4 electrolyte. The specific capacity at a 5 Ag−1 current density was enhanced to 69 mAh g−1 by doping 1% ZnCl2 and 0.5% Zn(CF3SO3)2 in the 2 M ZnSO4 electrolyte. In addition, the co-doped electrolyte increased the ene... [more]

The article reviews the existing methods of increasing the energy efficiency of electric transport by analyzing and studying the methods of increasing the energy storage resource. It is grouped according to methods, approaches, and solutions. The most effective methods and ways of their implementation are identified. General methods of increasing energy efficiency, methods of increasing recuperation during braking, methods of energy-efficient energy consumption, the use of energy-saving technologies, and improving the energy efficiency of the traction drive are considered. The purpose of this work is to identify the main operating factors on the basis of a critical review of existing methods for assessing the technical condition of batteries and experimental results on the degradation of lithium-ion batteries. Using the great experience of the research group in the field of modeling, diagnostics, and forecasting of life of electric cars, as well as their intellectual management, the ne... [more]