The uncertainty of high penetration of renewable energy brings challenges to the safe and stable operation of a power system; the virtual synchronous compensation (VSCOM) can shift the demand and compensate real-time discrepancy between generation and demand, and can improve the active support ability for the power system. This paper proposes a novel capacity allocation strategy using VSCOM for renewable energy stations based on fuzzy constraints. Firstly, the basic framework of the VSCOM is constructed with energy storage and reactive power generator (SVG) unit. Secondly, the inertia and standby capacity requirements of high penetration of renewable energy system are modeled; on this basis, a capacity allocation model of each sub unit of the VSCOM is developed, and the investment economy and stable support needs are considered. Thirdly, the uncertainty set of wind power output is defined based on the historical data to find a decision that minimizes the worst-case expected where the w... [more]

A smart grid (SG), considered as a future electricity grid, utilizes bidirectional electricity and information flow to establish automated and widely distributed power generation. The SG provides a delivery network that has distributed energy sources, real-time asset monitoring, increased power quality, increased stability and reliability, and two-way information sharing. Furthermore, SG provides many advantages, such as demand response, distribution automation, optimized use of electricity, economical energy, real-time grid status monitoring, voltage regulation or VAR control, and electricity storage. In this survey, we explore the literature on smart Grid enabling technologies until 2022. We dig out four major systems: (1) the smart grid’s prominent features and challenges; (2) the smart grid standard system and legislations; (3) smart grid energy subsystem; and (4) the smart grid management system and protection system for new researchers for their future projects. The research chal... [more]

Metallic aluminum is widely used in propellants, energy-containing materials, and batteries due to its high energy density. In addition to burning in the air, aluminum can react with water to generate hydrogen. Aluminum is carbon-free and the solid-phase products can be recycled easily after the reaction. Micron aluminum powder is stable in the air and enables global trade. Aluminum metal is considered to be a viable recyclable carrier for clean energy. Based on the reaction characteristics of aluminum fuel in air and water, this work summarizes the energy conversion system of aluminum fuel, the combustion characteristics of aluminum, and the recycling of aluminum. The conversion path and application direction of electric energy and chemistry in the aluminum energy conversion system are described. The reaction properties of aluminum in the air are described, as well as the mode of activation and the effects of the aluminum-water reaction. In situ hydrogen production is achievable throu... [more]

This review comprehensively examines biochar, an essential material in an era of climate change for reducing carbon dioxide (CO2) emissions into the atmosphere. It is inconspicuous, black, lightweight, and very porous, and is produced through the thermal conversion of biomass. Our literature review highlights biochar’s expansive application possibilities. Firstly, its potential to improve soil quality and sequester CO2 has been examined, as well as its utilization in iron and steel manufacturing to minimize the quantity of coke and ultimately reduce CO2 emissions. In industrial manufacturing, the complete elimination of coke can promote environmental neutrality, which is achieved using biochar from biomass for its extrusion. Furthermore, biochar is becoming increasingly significant in modern energy storage technologies and as an important additive in Pickering emulsions, which are also employed in energy storage systems. Additionally, the use of carbon black is a broad topic, and this... [more]

Energy security and the resilience of electricity networks have recently gained critical momentum as subjects of research. The challenges of meeting the increasing electrical energy demands and the decarbonisation efforts necessary to mitigate the effects of climate change have highlighted the importance of microgrids for the effective integration of renewable energy sources. Microgrids have been the focus of research for several years; however, there are still many unresolved challenges that need to be addressed. Energy storage systems are essential elements that provide reliability and stability in microgrids with high penetrations of renewable energy sources. This study provides a systematic review of the recent developments in the control and management of energy storage systems for microgrid applications. In the early sections, a summary of the microgrid topologies and architectures found in the recent literature is given. The main contributions and targeted applications by the en... [more]

This work proposed an optimal design of PV-system-based water-pumped energy storage for both electricity and water supply. A case study was considered in a rural community in Cameroon. The parameters of the assessment of the system were reliability, represented in the present work by the system supply deficiency (SSD), and economic accessibility, represented by the levelized cost of energy (LCOE). The obtained results showed that for 0% SSD, the optimal configuration of the system was composed of 438 PV modules of 235 W, an immersed solar motor pump of 35 kW, a hydroelectric turbine of 51.7 kW, an upper reservoir of 2307.1 m3, an inverter of 25.27 kW, and a total dynamic head of 88 m. The corresponding LCOE to this configuration is 0.224 USD/kWh. The economic accessibility of the designed system was evaluated by comparison with a PV-system-based battery energy storage. The optimal design configuration of the studied PV-system-based battery energy storage was a PV generator (120 PV modu... [more]

Aqueous zinc-ion hybrid supercapacitors (AZHSs) are promising candidates for powering mobile devices due to their intrinsically high safety, the high theoretical capacity of zinc anodes, and the wide range of sources of raw materials for activated carbon (AC) cathodes. Here, we report that there is a synergistic effect between the anions of an AZHS electrolyte, which can significantly improve the specific capacity and rate capability of an AC cathode. The results showed that the specific capacities of the AC cathode//2 M ZnSO4(aq)//Zn anode energy storage system were 115 and 41 mAh g−1 at 0.1 and 5 A g−1 current densities, respectively. The specific capacity at a 0.1 A g−1 current density was enhanced to 136 mAh g−1 by doping 0.5% ZnCl2 and 0.5% Zn(CF3SO3)2 in the 2 M ZnSO4 electrolyte. The specific capacity at a 5 Ag−1 current density was enhanced to 69 mAh g−1 by doping 1% ZnCl2 and 0.5% Zn(CF3SO3)2 in the 2 M ZnSO4 electrolyte. In addition, the co-doped electrolyte increased the ene... [more]

The article reviews the existing methods of increasing the energy efficiency of electric transport by analyzing and studying the methods of increasing the energy storage resource. It is grouped according to methods, approaches, and solutions. The most effective methods and ways of their implementation are identified. General methods of increasing energy efficiency, methods of increasing recuperation during braking, methods of energy-efficient energy consumption, the use of energy-saving technologies, and improving the energy efficiency of the traction drive are considered. The purpose of this work is to identify the main operating factors on the basis of a critical review of existing methods for assessing the technical condition of batteries and experimental results on the degradation of lithium-ion batteries. Using the great experience of the research group in the field of modeling, diagnostics, and forecasting of life of electric cars, as well as their intellectual management, the ne... [more]

This paper focuses on the model of gas hydrate formation in an experimental device, which allows the circulation of the resulting mixture (water and gas) and significantly accelerates the process of hydrate formation in the laboratory. A 3D model was developed to better imagine the placement of individual parts of the device. The kinetics of hydrate formation were predicted from equilibrium values of chemical potentials. The aim of solving the equations of state gases in the mathematical model was to optimize the parameters involved in the formation of hydrates. The prediction of the mathematical model was verified by numerical simulation. The mathematical model and numerical simulation predict the chemical reaction evolving over time and determine the amount of crystallized water in the reactor. A remarkable finding is that the deviation of the model and simulation at the initiation the calculation of crystallized water starts at 76% and decreases over time to 2%. Subsequently, the nu... [more]

Multi-stall fast charging stations are often thought to require megawatt-range grid connections. The power consumption profile of such stations results in high cost penalties due to monthly power peaks and expensive linkage fees. A local energy storage system (ESS) can be used to address peak power demands. However, no appropriate sizing method is available to match specific constraints, such as the contracted power available from the grid and the projected recharging demand. A stochastic distribution of charging events was used in this paper to model power demand profiles at the station, with a one minute resolution. Based on 100 simulated months, we propose an optimum number of charging points, and we developed an algorithm to return the required local ESS capacity as a function of the available grid connection. The role of ESSs in the range of 100 kWh to 1 MWh was studied for all stations with up to 2000 charging events per week. The relevance of ESS implementation was assessed alon... [more]

Two-tank molten salt heat storage systems are considered to be the most mature thermal storage technology in solar thermal power plants. As the key part of the system, the thermal performance of molten salt tanks is of great importance. An experimental thermal storage system with a new type of molten salt as a thermal energy storage medium has been built to investigate the temperature distribution of molten salt inside the tank during the cooling process from 550 °C to 180 °C. The temperature distribution of the salt was obtained, which reveals that temperature stratification appears at the bottom of the tank within the height of 200 mm. The position, with the maximum temperature difference of 16.1 °C, is at the lower edges of the molten salt storage tank. The temperature distribution was also measured to deepen our understanding of the insulation foundation, which shows that the maximum temperature appears at the middle upper part of the foundation and decreases radially. The heat los... [more]

Phase-homogeneous LiFePO4 powders have been synthesized. The content of impurity crystalline phases was less than 0.1%, according to synchrotron diffractometry (SXRD) data. Anisotropic crystallite sizes L¯Vhkl were determined by XRD. A low resistance covering layer of mechanically strong ferric-graphite-graphene composite with impregnated ferric (Fe3+) particles < 10 nm in size increases the cycleability compared to industrial cathodes. In accordance with the corrosion model, the destruction of the Fe3+-containing protective layer of crystallites predominates at the first stage, and at the second stage Fe escapes into the electrolyte and to the anode. The crystallite size decreases due to amorphization that starts from the surface. The rate capability, Q(t), has been studied as a function of L¯Vhkl, of the correlation coefficients rik between crystallite sizes, of the Li diffusion coefficient, D, and of the electrical relaxation time, τel. For the test cathode with a thickness of 8... [more]

Since existing energy system models often represent storage behavior in a simplified way, in this work, a tool chain for deriving consistent storage model parameters for optimization models is developed. The aim of our research work is to identify what are non-negligible influences on the the technical characteristics and dynamic behavior of the storage, to quantify the effect of these influences, and represent these effects in the model. This paper describes the developed tool chain and presents its application using an example. The tool chain consists of the steps “parameter screening”, “dynamic simulation”, “regression analysis” and “refining optimization model”. It is investigated which parameters have an influence on the storage system (here pumped hydroelectric energy storage (PHES)), how the storage behavior is modeled, which influencing factors have a measurable effect on the system, and how these findings can be integrated into optimization models. The main finding is that in... [more]

The aim of this paper is to evaluate the overall life cycle environmental impact of an adiabatic compressed air energy storage (ACAES) system, which is designed to achieve the best match between the power production of a photovoltaic (PV) power plant and the power demand from the final user. The electrical energy demand of a small town, with a maximum power load of about 10 MW, is considered a case study. The ACAES system is designed with a compressor-rated power of about 10 MW and charging and discharging times of 10 and 24 h, respectively. Different sizes of the PV plant, ranging from 20 to 40 MWp, and two different solutions for the compressed air storage, an underground cavern, and a gas pipeline, are analyzed. The aim of this analysis is to compare the impacts on human health, ecosystem quality, climate change, and resource consumption of the PV power generation plant and the integrated PV-ACAES system with those of a reference scenario in which the end user demand is met entirely... [more]

To solve the challenge of low efficiency and high operation cost caused by intermittent high-power charging in an energy storage tram, this work presents a collaborative power supply system with supercapacitor energy storage. The scheme can reduce the peak power of the transformer, therefore reducing the grid-side capacity and improving the efficiency. However, there is a lack of quantitative analysis on the performance improvement of the solution. The energy efficiency models of critical components are proposed to evaluate the efficiency of the system, and energy efficiency optimization is conducted. Taking an operational tram line as an example, the improved charging efficiency and reduced operating costs are derived. Further, the ground energy storage capacity is designed and implemented. The measured data demonstrates that the energy efficiency of the optimized charging system is improved, which proves its effectiveness and practicability.

Small-size concentrated solar power (CSP) plants are presently not diffused due to a too-high levelized cost of electricity (LCoE), contrarily to CSP plants with capacity >100 MW, which provide LCoE < 20 cEUR/kWh. The integration of solid-state converters within CSP plants can enhance the scalability and economic competitiveness of the whole technology, especially at smaller scales, since the conversion efficiency of solid-state converters weakly depends on the size. Here a system with a high-temperature thermionic energy converter (TEC), together with an optical concentrator designed to be cheap even providing high concentration ratios, is proposed to improve the cost-effectiveness of CSP plants, thus achieving conditions for economic sustainability and market competitiveness. This is possible since TEC can act as a conversion topping cycle, directly producing electricity with a possible conversion efficiency of 24.8% estimated by applying realistic conditions and providing useful... [more]

As forced-air cooling for heat sinks is widely used in the cooling design of electrical and electronic equipment, their thermal performance is of critical importance for maintaining excellent cooling capacity while reducing the size and weight of the heat sink and the equipment as a whole. This paper presents a method based on the combination of computational fluid dynamics (CFD) simulation and surrogate models to optimize heat sinks for high-end energy storage converters. The design takes the thermal resistance and mass of the heat sink as the optimization goals and looks for the best design for the fin height, thickness and spacing, as well as the base thickness. The analytical and numerical results show that the thermal resistance and mass of the heat sink are reduced by the proposed algorithms, as are the temperatures of the heating elements. Test results verify the effectiveness of the optimization method combining CFD simulation with surrogate models.

Deep geothermal resources for heat supply and waste heat potentials were assessed and measured for a high-temperature dairy plant. For the industrial waste heat, a borehole heat exchanger (BHE) seasonal storage was configured and simulated after an extensive investigation of shallow geothermal resources. We developed a concept for the subsequent use of the residual and waste heat from the plant in a low-temperature heating and cooling (LTHC) grid for the neighbouring former military camp “Martinek-Kaserne” with a future use as mixed-use urban quarter were investigated in two projects. The modelling of the deep geothermal resources showed that of the three potential reservoirs one is most feasible for geothermal heat supply with temperatures between 129 and 146 °C, which could be used with a high-temperature heat pump for process heat. The waste heat in all sub-processes of the dairy plant were measured over 18 months to identify the most suitable waste heat streams with regard to tempe... [more]

Decarbonisation of the energy sector is becoming increasingly more important to the reduction in climate change. Renewable energy is an effective means of reducing CO2 emissions, but the fluctuation in demand and production of energy is a limiting factor. Liquid hydrogen allows for long-term storage of energy. Hydrogen quality is important for the safety and efficiency of the end user. Furthermore, the quality of the hydrogen gas after liquefaction has not yet been reported. The purity of hydrogen after liquefaction was assessed against the specification of Hydrogen grade D in the ISO-14687:2019 by analysing samples taken at different locations throughout production. Sampling was carried out directly in gas cylinders, and purity was assessed using multiple analytical methods. The results indicate that the hydrogen gas produced from liquefaction is of a higher purity than the starting gas, with all impurities below the threshold values set in ISO-14687:2019. The amount fraction of water... [more]

This study implemented a bidirectional artificial neuro-fuzzy inference system (ANFIS) to solve the problem of system resilience in synchronized and islanded grid mode/operation (during normal operation and in the event of a catastrophic disaster, respectively). Included in this setup are photovoltaics, wind turbines, batteries, and smart load management. Solar panels, wind turbines, and battery-charging supercapacitors are just a few of the sustainable energy sources ANFIS coordinates. The first step in the process was the development of a mode-specific control algorithm to address the system’s current behavior. Relative ANFIS will take over to greatly boost resilience during times of crisis, power savings, and routine operations. A bidirectional converter connects the battery in order to keep the DC link stable and allow energy displacement due to changes in generation and consumption. When combined with the ANFIS algorithm, PV can be used to meet precise power needs. This means it c... [more]

This paper presents a simulation of an insulated micro-grid system based on the three-level converters control for energy management. Different renewable power sources (wind turbine and Photovoltaic (PV) energy systems) are used to energize the micro-grid. However, a battery energy storage system (BESS) and a variable diesel generator are also used to improve the reliability of the system. The contribution of this research is focused on the power control method based on improving the quality of energy transfer, mastering dynamic interactions and maximum energy production from renewable energies to reduce the fuel consumption by the diesel. Firstly, the proposed control model for each renewable energy was carried out through simulation in the environments of Matlab and Simulink to test the robustness and performance. The second part of this research is dedicated to managing the sharing of power between load, generators, and storage systems by extracting the references of power. The thre... [more]

Although alkaline water electrolysis (AWE) is the most widespread technology for hydrogen production by electrolysis, its electrochemical and fluid dynamic optimization has rarely been addressed simultaneously using Computational Fluid Dynamics (CFD) simulation. In this regard, a two-dimensional (2D) CFD model of an AWE cell has been developed using COMSOL® software and then experimentally validated. The model involves transport equations for both liquid and gas phases as well as equations for the electric current conservation. This multiphysics approach allows the model to simultaneously analyze the fluid dynamic and electrochemical phenomena involved in an electrolysis cell. The electrical response was evaluated in terms of polarization curve (voltage vs. current density) at different operating conditions: temperature, electrolyte conductivity, and electrode-diaphragm distance. For all cases, the model fits very well with the experimental data with an error of less than 1% for the po... [more]

Sustainable Development Goals establish the main challenges humankind is called to tackle to assure equal comfort of living worldwide. Among these, the access to affordable renewable energy and clean water are overriding, especially in the context of developing economies. Reversible Solid Oxide Cells (rSOC) are a pivotal technology for their sector-coupling potential. This paper aims at studying the implementation of such a technology in new concept PV-hybrid energy storage mini-grids with close access to seawater. In such assets, rSOCs have a double useful effect: charge/discharge of the bulk energy storage combined with seawater desalination. Based on the outcomes of an experimental proof-of-concept on a single cell operated with salty water, the operation of the novel mini-grid is simulated throughout a solar year. Simulation results identify the fittest mini-grid configuration in order to achieve energy and environmental optimization, hence scoring a renewable penetration of more t... [more]

In order to solve the capacity shortage problem in power system frequency regulation caused by large-scale integration of renewable energy, the battery energy storage-assisted frequency regulation is introduced. In this paper, an adaptive control strategy for primary frequency regulation of the energy storage system (ESS) was proposed. The control strategy combined virtual droop control, virtual inertial control, and virtual negative inertial control. The virtual inertial control was used to reduce the frequency change rate, and the virtual droop control was used to reduce the steady-state frequency deviation. The virtual droop control and the virtual inertia control were adopted in the frequency deterioration stage to slow down the frequency drop. While in the frequency recovery stage, the virtual negative inertia control worked together with the virtual droop control to accelerate the frequency recovery. Besides, the coefficients of the control methods were related to the state of ch... [more]

This paper aims to compute the performances of a smaller version of Solana power plant, with half the solar field, and 1 of 2 turbines in the power cycle, that can be built in Amman or Ma’an in Jordan. The climate conditions for both Amman and Ma’an are discussed thoroughly in the paper. Furthermore, a preliminary validation exercise performed by using measured monthly average values of electricity production from existing plants, a system advisor model (SAM) is used to predict the performances of the proposed Solana-like plants in Ma’an and Amman. The validation shows a good agreement with the measured data for different existing power plants. The simulation results including the monthly capacity factors suggest the annual operation in Ma’an maybe even better than the operation in Gila Bend, for an annual average capacity factor of about 41% for Ma’an vs. a capacity factor of about 39% for Gila Bend. This is mainly due to the best combination of direct normal irradiance (DNI) and the... [more]