The performance, energy storage capacity, safety, and lifetime of lithium-ion battery cells of different chemistries are very sensitive to operating and environmental temperatures. The cells generate heat by current passing through their internal resistances, and chemical reactions can generate additional, sometimes uncontrollable, heat if the temperature within the cells reaches the trigger temperature. Therefore, a high-performance battery cooling system that maintains cells as close to the ideal temperature as possible is needed to enable the highest possible discharge current rates while still providing a sufficient safety margin. This paper presents a novel design, preliminary development, and results for an inexpensive reusable, liquid-cooled, modular, hexagonal battery module that may be suitable for some mobile and stationary applications that have high charge and or discharge rate requirements. The battery temperature rise was measured experimentally for a six parallel 18650 c... [more]

Nowadays, many buildings are equipped with various energy sources. The challenge is how to efficiently utilize their energy production. This includes decreasing the share and costs of external energy—usually electrical energy delivered from the grid. The following study presents a qualitative approach with a combined control to solve the problem. The approach is demonstrated using a simulated residential building equipped with a hybrid energy system: a thermal energy storage combined with an electrical heater, a geothermal heat pump and a solar thermal collector. Consequently, the share of renewable energy was increased and, conversely, costs of the external energy from grid decreased by 12.2%. The results were based on a qualitative approach and the algorithm which predicts the need of energy of the building over the next 6 h with the aid of weather forecasting. This approach included a storage tank of 300 L. The energy costs can be further decreased 7.7% by increasing thermal storage... [more]

In the context of the energy transition, energy system planning is becoming increasingly relevant for decentralized systems. Motivated by the strong increase of publications on municipal energy system planning (MESP), these studies are subjected to a bibliometric analysis in this paper. The 1235 articles, which are based on the Web of Science database, are examined using the R-tool bibliometrix. The study shows that China is the most important contributor with 225 articles, followed by the USA (205) and Germany (120). Most cross-country collaborations were conducted between China and Canada, focusing mainly on uncertainties in MESP. Among the institutions, the North China Electric Power University is responsible for most articles (42). The core journals on MESP are Energy, Applied Energy, Energy Policy, Energies and Renewable Energy, which published 37% of the 1235 articles. Publications on MESP focus on renewable energies, optimization and hybrid energy systems. Furthermore, district... [more]

Supercapacitors, one of the most promising energy storage technologies for high power density industrial applications, exchange the energy mostly through power electronic converters, operating under high frequency components due to the commutation. The high frequency produces important effects on the performance of the supercapacitors in relation to their capacitance, inductance and internal resistance (ESR). These parameters are fundamental to evaluate the efficiency of this energy storage system. The aim of the paper is to obtain an accurate model of two supercapacitors connected in series (functional and extrapolated unit) to represent the frequency effects for a wide range of frequencies. The methodology is based on the definition of an appropriate equivalent electric circuit with voltage dependance, obtaining their parameters from experimental tests, carried out by means of electrochemical impedance spectroscopy (EIS) and the use of specific software tools such as EC-Lab® and Stat... [more]

This paper presents a SWOT analysis of the impact of recent EU regulatory changes on the business case for energy storage (ES) using the UK as a case study. ES technologies (such as batteries) are key enablers for increasing the share of renewable energy generation and hence decarbonising the electricity system. As such, recent regulatory changes seek to improve the business case for ES technologies on national networks. These changes include removing double network charging for ES, defining and classifying ES in relevant legislations, and clarifying ES ownership along with facilitating its grid access. However, most of the current regulations treat storage in a similar way to bulk generators without paying attention to the different sizes and types of ES. As a result, storage with higher capacity receives significantly higher payment in the capacity market and can be exempt from paying renewable energy promotion taxes. Despite the recent regulatory changes, ES is defined as a generati... [more]

Optimization systems (OSs) allow operators of electrical power systems (PS) to optimally operate PSs and to also create optimal PS development plans. The inclusion of OSs in the PS is a big trend nowadays, and the demand for PS optimization tools and PS-OSs experts is growing. The aim of this review is to define the current dynamics and trends in PS optimization research and to present several papers that clearly and comprehensively describe PS OSs with characteristics corresponding to the identified current main trends in this research area. The current dynamics and trends of the research area were defined on the basis of the results of an analysis of the database of 255 PS-OS-presenting papers published from December 2015 to July 2019. Eleven main characteristics of the current PS OSs were identified. The results of the statistical analyses give four characteristics of PS OSs which are currently the most frequently presented in research papers: OSs for minimizing the price of electri... [more]

The application of the large-capacity energy storage and heat storage devices in an integrated energy system with a high proportion of wind power penetration can improve the flexibility and wind power accommodation capacity of the system. However, the efficiency and cost of the flexible resource should also be taken into consideration when improving the new energy accommodation capacity. Based on these considerations, the authors try to construct a joint optimal scheduling model for day-ahead energy storage and heat storage that considers flexibility. The power supplies and devices will be modeled separately, which enables a universal applicability. The objective function is the minimum cost and wind curtailment. Various practical constraints are taken into account. The mixed integer programming and software GLPK is used to program and solve. The actual operation data of a provincial power grid in northern China is used to conduct simulation analysis in four different working condition... [more]

Community Energy Markets (CEMs) enable trading opportunities between participants in a community to achieve savings and profits. However, the market design and the behaviour of participants are key factors that determine the success of such markets. To this end, this research presents a CEM model and conducts agent-based simulations to study the benefits of the CEM to consumers and prosumers. The proposed market structure is an hour-ahead periodic double auction. In particular, market rules are proposed that incentivise the provision of energy supply to the community and the investment in energy storage. Furthermore, a trading strategy is introduced that leverages energy flexibility created by the storage devices. Finally, as well as the hour-ahead market, we include a minute-by-minute balancing as part of the CEM’s energy exchange mechanism. The balancing approach is introduced to account for a community budget deficit caused by the time difference between supply and demand. The propo... [more]

The present work evaluates the application of regenerative braking for energy recovery in diesel-electric freight trains to increase efficiency and to improve decarbonization. The energy from regenerative braking has to be stored onboard when the track is not electrified. Different technologies of energy recovery are presented and discussed. The energy balance of an existing route is presented and simulated for different battery sizes. The analysis is illustrated with experimental data from an important Brazilian railway. Results show that the energy recovery from regenerative brake is a feasible investment and may be recommended to increase the efficiency in transportation and also to improve the low carbon mobility in railway systems.

Planning the operation scheduling with optimization heuristic algorithms allows microgrids to have a convenient tool. The developments done in this study attain this scheduling taking into account the impact of energy storage useful life in the microgrid operation. The scheduling solutions, proposed for the answer of an optimization problem, are obtained by using a metaheuristic algorithm called Differential Evolutionary Particle Swarm Optimization (DEEPSO). Thanks to the optimization that is conducted in this study, it is possible to formulate dispatches of the existent microgrid (MG) by always looking for the ideal dispatch that implies a lower cost and provides a greater viability to any project related to renewable energy, electric vehicles and energy storage. These advances oblige the battery manufacturers to start looking for more powerful batteries, with lower costs and longer useful life. In this way, this paper proposes a scheduling tool considering the energy storage useful l... [more]

The paper presents a novel configuration of an axial hybrid magnetic bearing (AHMB) for the suspension of steel flywheels applied in power-intensive energy storage systems. The combination of a permanent magnet (PM) with excited coil enables one to reduce the power consumption, to limit the system volume, and to apply an effective control in the presence of several types of disturbances. The electromagnetic design of the AHMB parts is carried out by parametric finite element analyses with the purpose to optimize the force performances as well as the winding inductance affecting the electrical supply rating and control capability. Such investigation considers both the temperature dependence of the PM properties and the magnetic saturation effects. The electrical parameters and the force characteristics are then implemented in a control scheme, reproducing the electromechanical behavior of the AHMB-flywheel system. The parameter tuning of the controllers is executed by a Matlab/Simulink... [more]

The ongoing electrification of the heat and transport sectors is expected to lead to a substantial increase in peak electricity demand over the coming decades, which may drive significant investment in network reinforcement in order to maintain a secure supply of electricity to consumers. The traditional way of security provision has been based on conventional investments such as the upgrade of the capacity of electricity transmission or distribution lines. However, energy storage can also provide security of supply. In this context, the current paper presents a methodology for the quantification of the security contribution of energy storage, based on the use of mathematical optimization for the calculation of the F-factor metric, which reflects the optimal amount of peak demand reduction that can be achieved as compared to the power capability of the corresponding energy storage asset. In this context, case studies underline that the F-factors decrease with greater storage power capa... [more]

This study is mainly to provide an overview of human walking induced energy harvest. Focusing on the proportion of all energy sources provided by daily activity, the available human walking induced energy is divided with respect to the generation principle. The extensive research on harvesting energy results from body vibration, inertial element, and foot press to convert into electricity is overviewed. Over the past decades, various smart materials have been employed to achieve energy conversion. Generators based on electromagnetic induction or the triboelectric effect were developed and integrated. Small captured power and low overall efficiency are criticized. The concept of human walking energy harvest is extended into the wearable walking robotics using other mediums, such as fluid, to transmit power instead of electricity. By comparison, it is indicated that less energy conversion links are involved in energy regeneration of such applications and expected to guarantee less loss a... [more]

The Philippines consists of 7100 islands, many of which still use fossil fuel diesel generators as the main source of electricity. This supply can be complemented by the use of renewable energy sources. This study uses a Philippine offshore island to optimize the capacity configuration of a hybrid energy system (HES). A thorough investigation was performed to understand the operating status of existing diesel generator sets, load power consumption, and collect the statistics of meteorological data and economic data. Using the Hybrid Optimization Models for Energy Resources (HOMER) software we simulate and analyze the techno-economics of different power supply systems containing stand-alone diesel systems, photovoltaic (PV)-diesel HES, wind-diesel HES, PV-wind-diesel HES, PV-diesel-storage HES, wind-diesel-storage HES, PV-wind-diesel-storage HES. In addition to the lowest cost of energy (COE), capital cost, fuel saving and occupied area, the study also uses entropy weight and the Techni... [more]

The thermal energy storage properties of a working fluid can be modified by the exothermic and endothermic adsorption and desorption of fluid molecules in the micro/nanoporous materials. In this study, thermogravimetric (TG) analysis experiments and molecular simulations (molecular dynamics, MD, and grand canonical Monte Carlo, GCMC) were employed to examine the thermal energy storage properties of the UIO-66 metal organic framework material, UIO-66/H2O nanofluids and pure water. Our results showed that the molecular simulation calculations were, in principle, consistent with the obtained experimental data. The thermal energy storage performance of UIO-66/H2O nanofluids was enhanced with the increase in the UIO-66 mass fraction. In addition, the differences between the simulation calculations and experimental results could be mainly ascribed to the different structures of UIO-66 and the evaporation of fluid samples. Furthermore, this work indicated that molecular simulations contribute... [more]

Energy Management System (EMS) optimal strategies have shown great potential to match the fluctuating energy production from renewables with an electric demand profile, which opens the way to a deeper penetration of renewable energy sources (RES) into the electric system. At a single building level, however, handling of different energy sources to fulfill both thermal and electric requirements is still a challenging task. The present work describes the potential of an EMS based on Model Predictive Control (MPC) strategies to both maximize the RES exploitation and serve as an ancillary service for the grid when a Heat Pump (HP) coupled with a Thermal Energy Storage (TES) is used in a residential Hybrid Renewable Energy System (HRES). Cost savings up to 30% as well as a reduction of the purchased energy unbalance with the grid (about 15%−20% depending on the season) have been achieved. Moreover, the thermal energy storage leads to a more efficient and reliable use of the Heat Pump by gen... [more]

The energy consumption of urban central heating in northern China is two to four times that in northern Europe and other countries. Beijing has adopted measures, such as ‘coal to gas’ and ‘coal to electricity’, to reduce environmental pollution caused by central heating. Given a peak-to-valley difference in the electricity supply of power plant, which is uneven day and night, this study proposes to store the night-time off-peak electricity in the form of heat energy and drive the ammonia absorption system in the form of steam or hot water during peak or flat electricity. Simulation results of ammonia absorption cooling and heating dual-supply system show that heat source temperature increases, evaporation temperature increases, and cooling water temperature decreases are all beneficial to improve the refrigeration coefficient in the summer cooling condition. In the meantime, heat source temperature increases, evaporation temperature increases, and cooling water temperature decreases ar... [more]

This paper presents a sizing and siting model for distributed generators (DGs) and energy storage systems (ESS) towards the design of a cost-efficient and reliable microgrid considering electric vehicles (EVs). The proposed model exploits the coordinated energy dispatching of DGs, ESS, and EVs, aiming at minimizing the overall planning and operating cost as well as meeting power supply reliability requirements. This issue is addressed in a two-stage framework. The upper stage determines the sizes and sites of candidate DGs and ESS, and the lower stage optimizes the microgrid’s economic power dispatch. Since the two-stage model contains both planning and operational variables, a two-stage iterative heuristic algorithm is designed. The effectiveness of the proposed approach is validated by case studies, and corresponding results demonstrate that the planning approach that considers coordinated management of an EV fleet and economic power dispatch of microgrid achieves better economics. I... [more]

In this communication, the measured behaviour of a lead-acid battery bank within a stand-alone residential solar photovoltaic (PV)-genset-battery hybrid power system in Canada is presented and discussed. In order to capture rare field-based battery performance data, a newly commissioned lead-acid battery bank was equipped with a battery monitoring device capable of logging voltage, current, temperature and amp-hours every 30 s for the life of the battery. The measured data captures a severe loss of battery capacity due to a combination of short-term deep discharge and extended partial state of charge operation—conditions not unusual during winter season PV-genset-battery hybrid power system operation. Subsequent manual override of the system control set points to encourage gradual battery overcharge are shown to recover the lead-acid battery bank’s performance over the following three months. Limitations of the power conversion system’s battery management approach are discussed and a n... [more]

Renewable Energy Sources (RES) have been gaining popularity on a continuous basis and the current global political situation is only accelerating energy transformation in many countries. Objectives related to environmental protection and use of RES set by different countries all over the world as well as the European Union (EU) are becoming priorities. In Poland, after years of a boom in photovoltaic (PV) installations, the Renewable Energy Sources Act has been amended, resulting in a change to the billing system for electricity produced by individual prosumers. The change in the billing method, also in pursuance to the provisions of EU laws, has contributed to the inhibition of the PV installation market for fear of energy prices and investment payback time. In this paper, by using the Net Present Value (NPV) method, three mechanisms of billing of electricity from prosumer micro-installations—based on the net-metering principle and net-billing principle (using monthly and hourly price... [more]

A paradigm shift in power systems is observed due to the massive integration of renewable energy sources (RESs) as distributed generators. Mainly, solar photovoltaic (PV) panels and wind generators are extensively integrated with the modern power system to facilitate green efforts in the electrical energy sector. However, integrating these RESs destabilizes the frequency of the modern power system. Hitherto, the frequency control has not drawn sufficient attention due to the reduced inertia and complex control of power electronic converters associated with renewable energy conversion systems. Thus, this article provides a critical summary on the frequency control of solar PV and wind-integrated systems. The frequency control issues with advanced techniques, including inertia emulation, de-loading, and grid-forming, are summarized. Moreover, several cutting-edge devices in frequency control are outlined. The advantages and disadvantages of different approaches to control the frequency o... [more]

Energy management for multi-home installation of solar PhotoVoltaics (solar PVs) combined with Electric Vehicles’ (EVs) charging scheduling has a rich complexity due to the uncertainties of solar PV generation and EV usage. Changing clients from multi-consumers to multi-prosumers with real-time energy trading supervised by the aggregator is an efficient way to solve undesired demand problems due to disorderly EV scheduling. Therefore, this paper proposes real-time multi-home energy management with EV charging scheduling using multi-agent deep reinforcement learning optimization. The aggregator and prosumers are developed as smart agents to interact with each other to find the best decision. This paper aims to reduce the electricity expense of prosumers through EV battery scheduling. The aggregator calculates the revenue from energy trading with multi-prosumers by using a real-time pricing concept which can facilitate the proper behavior of prosumers. Simulation results show that the pr... [more]

The need to reduce greenhouse gas emissions is driving many actions to decarbonize the most impactful sectors. Among these, the energy sector accounts for almost one third of emissions. Increasing the penetration of renewable energy in the energy mix could easily reduce the emissions of this sector. Theoretically, the target to aim for would be 100% renewable energy production. However, the variable nature of power production from photovoltaic and wind systems, which are expected to play a key role in the energy transition, may pose several limitations to the effective penetration of renewable energy. Many concerns arise when one considers the large diffusion of renewable energy that would be required to meet green targets, and the operating conditions of other systems in charge of compensating for renewable energy variations. This study aims to investigate the potential impact of an increase in the amount of renewable energy installed in a country, particularly in Italy. A simplified... [more]

In this paper, a method for rationally allocating energy storage capacity in a high-permeability distribution network is proposed. By constructing a bi-level programming model, the optimal capacity of energy storage connected to the distribution network is allocated by considering the operating cost, load fluctuation, and battery charging and discharging strategy. By constructing four scenarios with energy storage in the distribution network with a photovoltaic permeability of 29%, it was found that the bi-level decision-making model proposed in this paper saves 2346.66 yuan and 2055.05 yuan, respectively, in daily operation cost compared to the scenario without energy storage and the scenario with single-layer energy storage. After accessing IEEE-33 nodes for simulation verification, it was found that the bi-level decision-making model proposed in this paper has a good inhibition effect on voltage fluctuation and load fluctuation after energy storage configuration. In addition, this p... [more]

Electric power reliability is one of the most important factors in the social and economic evolution of a smart city, whereas the key factors to make a city smart are smart energy sources and intelligent electricity networks. The development of cost-effective microgrids with the added functionality of energy storage and backup generation plans has resulted from the combined impact of high energy demands from consumers and environmental concerns, which push for minimizing the energy imbalance, reducing energy losses and CO2 emissions, and improving the overall security and reliability of a power system. It is now possible to tackle the problem of growing consumer load by utilizing the recent developments in modern types of renewable energy resources (RES) and current technology. These energy alternatives do not emit greenhouse gases (GHG) like fossil fuels do, and so help to mitigate climate change. They also have in socioeconomic advantages due to long-term sustainability. Variability... [more]