In which way, and in which sectors, will renewable energy be integrated in the German Energy System by 2030, 2040, and 2050? How can the resulting energy system be characterised following a −95% greenhouse gas emission reduction scenario? Which role will hydrogen play? To address these research questions, techno-economic energy system modelling was performed. Evaluation of the resulting operation of energy technologies was carried out from a system and a business point of view. Special consideration of gas technologies, such as hydrogen production, transport, and storage, was taken as a large-scale and long-term energy storage option and key enabler for the decarbonisation of the non-electric sectors. The broad set of results gives insight into the entangled interactions of the future energy technology portfolio and its operation within a coupled energy system. Amongst other energy demands, CO2 emissions, hydrogen production, and future power plant capacities are presented. One main co... [more]

In which way, and in which sectors, will renewable energy be integrated in the German Energy System by 2030, 2040, and 2050? How can the resulting energy system be characterised following a −95% greenhouse gas emission reduction scenario? Which role will hydrogen play? To address these research questions, techno-economic energy system modelling was performed. Evaluation of the resulting operation of energy technologies was carried out from a system and a business point of view. Special consideration of gas technologies, such as hydrogen production, transport, and storage, was taken as a large-scale and long-term energy storage option and key enabler for the decarbonisation of the non-electric sectors. The broad set of results gives insight into the entangled interactions of the future energy technology portfolio and its operation within a coupled energy system. Amongst other energy demands, CO2 emissions, hydrogen production, and future power plant capacities are presented. One main co... [more]

Nuclear power plants in the United States are increasingly challenged to compete in wholesale electricity markets due to the low electricity costs and increasingly dynamic grid conditions from competing generation sources. An alternative market for nuclear power is industrial facilities that can use the thermal and/or electrical power generated by a nuclear power plant to offset the economic losses incurred by electricity market challenges. A generic pressurized water reactor (PWR) simulator was used to show the results of a basic design for a generic thermal power extraction system and tests were run using a set of procedures to show what happens when a nuclear power plant transitions from full electrical power dispatch to 15% and 50% thermal power dispatch. This type of operation leads to losses in turbine performance efficiency due to the deviation from the design operating point, but because the thermal power is also used by the industry load without conversion losses, the combined... [more]

Future low-carbon systems with very high shares of variable renewable generation require complex models to optimise investments and operations, which must capture high degrees of sector coupling, contain high levels of operational and temporal detail, and when considering seasonal storage, be able to optimise both investments and operations over long durations. Standard energy system models often do not adequately address all these issues, which are of great importance when considering investments in emerging energy carriers such as Hydrogen. An advanced energy system model of the Irish power system is built in SpineOpt, which considers a number of future scenarios and explores different pathways to the wide-scale adoption of Hydrogen as a low-carbon energy carrier. The model contains a high degree of both temporal and operational detail, sector coupling, via Hydrogen, is captured and the optimisation of both investments in and operation of large-scale underground Hydrogen storage is d... [more]

In this paper, a gas-to-power (GtoP) system for power outages is digitally modeled and experimentally developed. The design includes a solid-state hydrogen storage system composed of TiFeMn as a hydride forming alloy (6.7 kg of alloy in five tanks) and an air-cooled fuel cell (maximum power: 1.6 kW). The hydrogen storage system is charged under room temperature and 40 bar of hydrogen pressure, reaching about 110 g of hydrogen capacity. In an emergency use case of the system, hydrogen is supplied to the fuel cell, and the waste heat coming from the exhaust air of the fuel cell is used for the endothermic dehydrogenation reaction of the metal hydride. This GtoP system demonstrates fast, stable, and reliable responses, providing from 149 W to 596 W under different constant as well as dynamic conditions. A comprehensive and novel simulation approach based on a network model is also applied. The developed model is validated under static and dynamic power load scenarios, demonstrating excell... [more]

Hydrogen as a carbon-free fuel is commonly expected to play a major role in future energy supply, e.g., as an admixture gas in natural gas grids. Which impacts on residential and commercial gas appliances can be expected due to the significantly different physical and chemical properties of hydrogen-enriched natural gas? This paper analyses and discusses blends of hydrogen and natural gas from the perspective of combustion science. The admixture of hydrogen into natural gas changes the properties of the fuel gas. Depending on the combustion system, burner design and other boundary conditions, these changes may cause higher combustion temperatures and laminar combustion velocities, while changing flame positions and shapes are also to be expected. For appliances that are designed for natural gas, these effects may cause risk of flashback, reduced operational safety, material deterioration, higher nitrogen oxides emissions (NOx), and efficiency losses. Theoretical considerations and firs... [more]

The grand challenges in renewable energy lie in our ability to comprehend efficient energy conversion systems, together with dealing with the problem of intermittency via scalable energy storage systems. Relatively little progress has been made on this at grid scale and two overriding challenges still need to be addressed: (i) limiting damage to the environment and (ii) the question of environmentally friendly energy conversion. The present review focuses on a novel route for producing hydrogen, the ultimate clean fuel, from the Sun, and renewable energy source. Hydrogen can be produced by light-driven photoelectrochemical (PEC) water splitting, but it is very inefficient; rather, we focus here on how electric fields can be applied to metal oxide/water systems in tailoring the interplay with their intrinsic electric fields, and in how this can alter and boost PEC activity, drawing both on experiment and non-equilibrium molecular simulation.

This article presents the concept of renewable methanol production in the gas turbine cycle. As part of the work, an analysis was performed, including the impact of changing the parameters in the methanol reactor on the obtained values of power, yield and efficiency of the reactor, and chemical conversion. The aim of this research was to investigate the possibility of integrating the system for the production of renewable methanol and additional production of electricity in the system. The efficiency of the chemical conversion process and the efficiency of the methanol reactor increases with increasing pressure and decreasing temperature. The highest efficiency values, respectively η = 0.4388 and ηR = 0.3649, are obtained for parameters in the reactor equal to 160 °C and 14 MPa. The amount of heat exchanged in all exchangers reached the highest value for 14 MPa and 160 °C and amounted to Q˙ = 2.28 kW. Additionally, it has been calculated that if an additional exchanger is used bef... [more]

To solve the challenge of decarbonizing the transport sector, a broad variety of alternative fuels based on different concepts, including Power-to-Gas and Power-to-Liquid, and propulsion systems, have been developed. The current research landscape is investigating either a selection of fuel options or a selection of criteria, a comprehensive overview is missing so far. This study aims to close this gap by providing a holistic analysis of existing fuel and drivetrain options, spanning production to utilization. For this purpose, a case study for Germany is performed considering different vehicle classes in road, rail, inland waterway, and air transport. The evaluated criteria on the production side include technical maturity, costs, as well as environmental impacts, whereas, on the utilization side, possible blending with existing fossil fuels and the satisfaction of the required mission ranges are evaluated. Overall, the fuels and propulsion systems, Methanol-to-Gasoline, Fischer−Trops... [more]

A series of experiments were performed to investigate the effect of ignition energy (Eig) and hydrogen addition on the laminar burning velocity (Su), ignition delay time (tdelay), and flame rising time (trising) of lean methane−air mixtures. The mixtures at three different equivalence ratios (ϕ) of 0.6, 0.7, and 0.8 with varying hydrogen volume fractions from 0 to 50% were centrally ignited in a constant volume combustion chamber by a pair of pin-to-pin electrodes at a spark gap of 2.0 mm. In situ ignition energy (Eig ∼2.4 mJ ÷ 58 mJ) was calculated by integration of the product of current and voltage between positive and negative electrodes. The result revealed that the Su value increases non-linearly with increasing hydrogen fraction at three equivalence ratios of 0.6, 0.7, and 0.8, by which the increasing slope of Su changes from gradual to drastic when the hydrogen fraction is greater than 20%. tdelay and trising decrease quickly with increasing hydrogen fraction; however, trising... [more]

Proton Exchange Membrane (PEM) water electrolysis (WE) produces H2 with a high degree of purity, requiring only water and energy. If the energy is provided from renewable energy sources, it releases “Green H2”, a CO2-free H2. PEMWE uses expensive and rare noble metal catalysts, which hinder their use at a large industrial scale. In this work, the electrocatalytic properties of Transition Metal Phosphides (TMP) catalysts supported on Carbon Black (CB) for Hydrogen Evolution Reaction (HER) were investigated as an alternative to Platinum Group Metals. The physico-chemical properties and catalytic performance of the synthesized catalysts were characterized. In the ex situ experiments, the 25% FeP/CB, 50% FeP/CB and 50% CoP/CB with overpotentials of −156.0, −165.9 and −158.5 mV for a current density of 100 mA cm−2 showed the best catalytic properties, thereby progressing to the PEMWE tests. In those tests, the 50% FeP/CB required an overpotential of 252 mV for a current density of 10 mA cm−... [more]

(1) The German energy system transformation towards an entirely renewable supply is expected to incorporate the extensive use of green hydrogen. This carbon-free fuel allows the decarbonization of end-use sectors such as industrial high-temperature processes or heavy-duty transport that remain challenging to be covered by green electricity only. However, it remains unclear whether the current legislative framework supports green hydrogen production or is an obstacle to its rollout. (2) This work analyzes the relevant laws and ordinances regarding their implications on potential hydrogen production plant operators. (3) Due to unbundling-related constraints, potential operators from the group of electricity transport system and distribution system operators face lacking permission to operate production plants. Moreover, ownership remains forbidden for them. The same applies to natural gas transport system operators. The case is less clear for natural gas distribution system operators, wh... [more]

Several North American utilities are planning to blend hydrogen into gas grids, as a short-term way of addressing the scalable demand for hydrogen and as a long-term decarbonization strategy for ‘difficult-to-electrify’ end uses. This study documents the impact of 0−30% hydrogen blends by volume on the performance, emissions, and safety of unadjusted equipment in a simulated use environment, focusing on prevalent partially premixed combustion designs. Following a thorough literature review, the authors describe three sets of results: operating standard and “ultra-low NOx” burners from common heating equipment in “simulators” with hydrogen/methane blends up to 30% by volume, in situ testing of the same heating equipment, and field sampling of a wider range of equipment with 0−10% hydrogen/natural gas blends at a utility-owned training facility. The equipment was successfully operated with up to 30% hydrogen-blended fuels, with limited visual changes to flames, and key trends emerged: (a... [more]

An analysis of the literature data indicates a wide front of research and development in the field of the use of methane−hydrogen mixtures as a promising environmentally friendly low-carbon fuel. The conclusion of most works shows that the use of methane−hydrogen mixtures in internal combustion engines improves their performance and emission characteristics. The most important aspect is the concentration of hydrogen in the fuel mixture, which affects the combustion process of the fuel and determines the optimal operating conditions of the engine. When using methane−hydrogen mixtures with low hydrogen content, the safety measures and risks are similar to those that exist when working with natural gas. Serious logistical problems are associated with the difficulties of using the existing gas distribution infrastructure for transporting methane−hydrogen mixtures. It is possible that, despite the need for huge investments, it will be necessary to create a new infrastructure for the product... [more]

Hydrogen is increasingly being viewed as a significant fuel for future industrial processes as it offers pathways to zero emission. The UK sees hydrogen as one of a handful of low-carbon solutions for transition to net zero. Currently, most hydrogen production is from steam reforming of natural gas or coal gasification, both of which involve the release of carbon dioxide. Hydrogen production from mini decentralised grids via a thermochemical process, coupled with electricity production, could offer favourable economics for small modular reactors (SMRs), whereby demand or grid management as a solution would include redirecting the power for hydrogen production when electricity demand is low. It also offers a clean-energy alternative to the aforementioned means. SMRs could offer favourable economics due to their flexible power system as part of the dual-output function. This study objective is to investigate the critical performance parameters associated with the nuclear power plant (NPP... [more]

Anaerobic digestion (AD) and sewage sludge digestion (SD) plants generate significant quantities of ammoniacal nitrogen in their digestate liquor. This article assesses the economic viability and CO2 abatement opportunity from the utilisation of this ammonia under three scenarios and proposes their potential for uptake in the United Kingdom. Each state-of-the-art process route recovers ammonia and uses it alongside AD-produced biomethane for three different end goals: (1) the production of H2 as a bus transport fuel, (2) production of H2 for injection to the gas grid and (3) generation of heat and power via solid oxide fuel cell technology. A rigorous assessment of UK anaerobic and sewage digestion facilities revealed the production of H2 as a bus fleet transport fuel scenario as the most attractive option, with 19 SD and 42 AD existing plants of suitable scale for process implementation. This is compared to 3 SD/1 AD and 13 SD/23 AD existing plants applicable with the aim of grid inje... [more]

With increasing attention to climate change, the penetration level of renewable energy sources (RES) in the electricity network is increasing. Due to the intermittency of RES, gas-fired power plants could play a significant role in backing up the RES in order to maintain the supply−demand balance. As a result, the interaction between gas and power networks are significantly increasing. On the other hand, due to the increase in peak demand (e.g., electrification of heat), network operators are willing to execute demand response programs (DRPs) to improve congestion management and reduce costs. In this context, modeling and optimal implementation of DRPs in proportion to the demand is one of the main issues for gas and power network operators. In this paper, an emergency demand response program (EDRP) is implemented locally to reduce the congestion of transmission lines and gas pipelines more efficiently. Additionally, the effects of optimal implementation of local emergency demand respo... [more]

This study presents an approach for estimating fuel boil-off behaviour in cryogenic energy carrier ships, such as future liquid hydrogen (LH2) carriers. By relying on thermodynamic modelling and empirical formulas for ship motion and propulsion, the approach can be used to investigate boil-off as a function of tank properties, weather conditions, and operating velocities during a laden voyage. The model is first calibrated against data from a liquefied natural gas (LNG) carrier and is consequently used to investigate various design configurations of an LH2 ship. Results indicate that an LH2 ship with the same tank volume and glass wool insulation thickness as a conventional LNG carrier stores 40% of the fuel energy and is characterised by a boil-off rate nine times higher and twice as sensitive to sloshing. Adding a reliquefaction unit can reduce the LH2 fuel depletion rate by at least 38.7% but can increase its variability regarding velocity and weather conditions. In calm weather, LH... [more]

Anode recirculation with periodic purge is commonly used in polymer electrolyte fuel cell systems to control the accumulation of nitrogen, water, and other impurities that are present in the fuel or diffuse through the membrane from the cathode compartment. In this work, we develop a simple, generalized analytical model that simulates the time dependence of the accumulation of inert impurities in the anode compartment of such a system. It is shown that, when there is transport out of the anode chamber, the inert species is expected to accumulate exponentially until equilibrium is reached when the rate of inert entering the anode in the fuel supply and/or via crossover from the cathode is balanced by the rate of leakage and/or crossover to the cathode. The model is validated using recently published experimental data for the accumulation of N2, CH4, and CO2 in a recirculated system. The results show that nitrogen accumulation needs to be taken into account to properly adjust system para... [more]

The use of hydrogen in small scale gas turbines is currently limited by several issues. Blending hydrogen with methane or other gaseous fuels can be considered a low medium-term viable solution, with the goal of reducing greenhouse gas emissions. In fact, only small amounts can be mixed with methane in premixed combustors, due to the risk of flashback. The aim of this article is to investigate the injection of small quantities of steam as a method of increasing the maximum permissible hydrogen content in a mixture with methane. The proposed approach involves introducing the steam directly into the combustion chamber into the main fuel feeding system of a Turbec T100. The study is carried out by means of CFD analysis of the combustion process. A thermodynamic analysis of the energy system is used to determine boundary conditions. The combustion chamber is discretized using a three-dimensional mesh consisting of 4.7 million nodes and the RANS RSM model is used to simulate the effects of... [more]

A potentially viable solution to the problem of greenhouse gas emissions by vehicles in the transportation sector is the deployment of hydrogen as alternative fuel. A limitation to the diffusion of the hydrogen-fuelled vehicles option is the intricate refuelling stations that vehicles will require. This study examines the practical use of hydrogen fuel within the internal combustion engine (ICE)-powered long-haul, heavy-duty trucking vehicles. Specifically, it appraises the techno-economic feasibility of constructing a network of long-haul truck refuelling stations using hydrogen fuel, across Canada. Hydrogen fuel is chosen as an option for this study due to its low carbon emissions rate compared to diesel. This study also explores various operational methods, including variable technology integration levels and truck traffic flows, truck and pipeline delivery of hydrogen to stations, and the possibility of producing hydrogen onsite. The proposed models created for this work suggest im... [more]

Shipping accounts for about 3% of global CO2 emissions. In order to achieve the target set by the Paris Agreement, IMO introduced their GHG strategy. This strategy envisages 50% emission reduction from international shipping by 2050, compared with 2008. This target cannot be fulfilled if conventional fuels are used. Amongst others, hydrogen is considered to be one of the strong candidates as a zero-emissions fuel. Yet, concerns around the safety of its storage and usage have been formulated and need to be addressed. “Safety”, in this article, is defined as the control of recognized hazards to achieve an acceptable level of risk. This article aims to propose a new way of comparing two systems with regard to their safety. Since safety cannot be directly measured, fuzzy set theory is used to compare linguistic terms such as “safer”. This method is proposed to be used during the alternative design approach. This approach is necessary for deviations from IMO rules, for example, when hydroge... [more]

In this paper, a hybrid reformed methanol fuel cell−battery system for telecom backup applications was modeled in MATLAB Simulink. The modeling was performed to optimize the operating strategy of the hybrid system using an energy management system with a focus on a longer lifetime and higher fuel efficiency for the fuel cell, while also keeping the state-of-charge (SOC) of the battery within a reasonable range. A 5 kW reformed methanol fuel cell stack and a 6.5 kWh Li-ion battery were considered for the hybrid model. Moreover, to account for the effects of degradation, the model evaluated the performance of the fuel cell both in the beginning of life (BOL) and after 1000 h and 250 start−stop cycling tests (EOT). The energy management system (EMS) was characterized by 12 operating conditions that used the battery SOC, load requirements and the presence or absence of grid power as the inputs to optimize the operating strategy for the system. Additionally, the integration of a 400 W photo... [more]

To understand the effect of hydrogen addition on the laminar burning velocity (LBV) of ethanol−air mixtures, experiments were conducted in a constant volume combustion chamber with the high-speed schlieren photography technique. The experiments were carried out under the equivalence ratios (ERs) of 0.7−1.4, an initial temperature of 400 K, an initial pressure of 0.1 MPa, and hydrogen fractions of 30% and 90% by volume, respectively. The effects of ER, initial temperature, initial pressure, and hydrogen fractions on the LBV were investigated. Moreover, adiabatic flame temperature (AFT), heat release rate (HRR), flow rate sensitivity analysis, and ROP (rate of production) analysis were also performed. Results showed that LBV increased with increasing hydrogen addition and temperature but decreased with increasing pressure. The hydrogen addition significantly increased the HRR of ethanol−hydrogen−air flames. The sensitivity analysis showed that R5 (O2 + H = O + OH) significantly influence... [more]

The present work describes highly efficient hydrogen production from ethanol in a plasma-catalytic reactor depending on the discharge power and catalyst bed temperature. Hydrogen production increased as the power increased from 15 to 25 W. A further power increase to 35 W did not increase hydrogen production. The catalyst was already active at a temperature of 250 °C, and its activity increased with increasing temperature to 450 °C. The further temperature increase did not increase the activity of the cobalt catalyst. The most important advantage of using the catalyst was the increased ethanol conversion to CO2 instead of CO production. As a result, the hydrogen yield was very high and reached 4.1 mol(H2)/mol(C2H5OH). This result was obtained with a stoichiometric molar ratio of water to ethanol of 3.