CO2 emissions associated with hydrogen production can be reduced replacing steam methane reforming with electrolysis using renewable electricity with a trade-off of increasing energy consumption, water consumption and cost. In this research, a linear programming optimization model of a hydrogen production system that considers simultaneously energy consumption, water consumption, CO2 emissions and cost on a cradle-to-gate basis was developed. The model was used to evaluate the impact of CO2 intensity on the optimum design of a hydrogen production system for Japan considering different stakeholders’ priorities. Hydrogen is produced using steam methane reforming and electrolysis. Electricity sources include grid, wind, solar photovoltaic, geothermal and hydro. Independent of the stakeholders’ priorities, steam methane reforming dominates hydrogen production for cradle-to-gate CO2 intensities larger than 9 kg CO2/kg H2, while electrolysis using renewable electricity dominates for lower cr... [more]

This study aimed at evaluating the economic performances of and carbon footprint associated with innovative systems for the energetic valorization of second cheese whey (SCW), a by-product of whey cheese manufacture, through anaerobic digestion processes. Three systems were modeled: a conventional single-stage anaerobic digester (FAD), located at about 50 km from the dairy factory; an on-site conventional single-stage anaerobic digester (CAD), located at the dairy industry; and an on-site two-stage anaerobic digester (TAD). The TAD technology enables the simultaneous production of hydrogen and methane on site. The biogases produced were combusted in combined heat and power plants (CHP), but only the onsite systems provided process heat to the dairy factory. In the specific conditions assumed, TAD configuration exhibited a higher energy output, which led to a GHG emission reduction of about 60% compared to FAD, mostly thanks to the additional hydrogen (H2) production and the improved en... [more]

This publication explores how the existing synergies between conventional liquefied natural gas regasification and hydrogen hydrogenation and dehydrogenation processes can be exploited. Liquid Organic Hydrogen Carrier methodology has been analyzed for hydrogen processes from a thermodynamic point of view to propose an energy integration system to improve energy efficiency during hybridization periods. The proposed neural network can acceptably predict power demand using daily average temperature as a single predictor, with a mean relative error of 0.25%, while simulation results based on the estimated natural gas peak demand show that high-pressure compression is the most energy-demanding process in conventional liquefied natural gas regasification processes (with more than 98% of the total energy consumption). In such a scenario, exceeding energy from liquid organic hydrogen carrier processes have been used as a Rankine’s cycle input to produce both power for the high-pressure compres... [more]

The production of biopellets from agricultural residues is an effective method to overcome the expected shortage in the supply of fuel pellets in the future. This work focused on the new potential applications of fuel pellets to produce liquid and gas fuels through thermochemical and hydrothermal biomass-to-gas technologies. The outcomes also provide a basis to compare the effects of steam and hydrothermal gasification techniques on the properties of product and byproduct, as well as their potentials. For steam gasification, the syngas yield increased from 10.7 to 27.8 mmol/g (on a dry and ash-free basis) by a rise in the gasification temperature at a constant steam-to-biomass ratio. In the case of hydrothermal gasification, there was no carbon monoxide, and hydrogen was the main gas product, and with an increase in the temperature, the hydrogen yield rose from 0.4 mmol/g to 3.17 mmol/g with temperatures from 350 to 650 °C. CO had the largest share in the gas product from steam gasific... [more]

Issues related to the reduction of the environmental impact of means of road transport by the use of electric motors powered by Proton Exchange Membrane (PEM) fuel cells are presented in this article. The overall functional characteristics of electric vehicles are presented, as well as the essence of the operation of a fuel cell. On the basis of analyzing the energy conversion process, significant advantages of electric drive are demonstrated, especially in vehicles for urban and suburban applications. Moreover, the analyzed literature indicated problems of controlling and maintaining fuel cell power caused by its highest dynamic and possible efficiency. This control was related to the variable load conditions of the fuel cell vehicle (FCV) engine. The relationship with the conventional dependencies in the field of vehicle dynamics is demonstrated. The final part of the study is related to the historical outline and examples of already operating fuel cell systems using hydrogen as an e... [more]

The performance of a perovskite-based oxygen carrier for the partial oxidation of methane in thermochemical energy storage applications has been investigated. A synthetic perovskite with formula La0.6Sr0.4FeO3 has been scrutinized for Chemical Looping Reforming (CLR) of CH4 under fixed-bed and fluidized-bed conditions. Temperature-programmed reduction and oxidation steps were carried out under fixed-bed conditions, together with isothermal reduction/oxidation cycles, to evaluate long-term perovskite performance. Under fluidized-bed conditions, isothermal reduction/oxidation cycles were carried out as well. Results obtained under fixed-bed and fluidized-bed conditions were compared in terms of oxygen carrier reactivity and stability. The oxygen carrier showed good reactivity and stability in the range 800−1000 °C. An overall yield of 0.6 Nm3 of syngas per kg of perovskite can be reached per cycle. The decomposition of CH4 catalyzed by the reduced oxide can also occur during the reductio... [more]

The use of hydrogen exists in various sectors in Poland and Germany. Hydrogen can be used in industry, transport, decarbonisation of the Polish steel industry and as one of the low-emission alternatives to the existing coal applications in this sector. Limiting climate change requires efforts on a global scale from all countries of the world. Significant economic benefits will be realized by stimulating the development of new technologies to deal with climate change. The scenarios show an increasing demand for industrial hydrogen in the future. The key is to replace gray hydrogen with green, and to convert industrial processes, which will create additional hydrogen demand. The condition for the development of a green hydrogen economy is access to adequate installed capacity in renewable energy. Germany will become the leading market in the era of energy transformation in the coming years. The implementation of the hydrogen assumptions in Poland is possible, to a greater extent, by the... [more]

The deployment of distributed energy systems must take place paying attention to the self-consumption of renewable generation. Innovative sector coupling strategies can play that role linking local electricity and gas grids. The present work aims to evaluate the energy and economic feasibility of the Power-to-Methane strategy application in urban energy districts. A residential cluster was considered as a case study. Two PV configurations have been applied to evaluate the Substitute Natural Gas (SNG) production under different renewable excess conditions. Thereafter, the Power-to-Methane strategy was implemented by varying the system’s size. Some significant configurations have been compared to each other in terms of energy and economics. Beyond a certain threshold limit, an increase in the photovoltaic size slightly enhances the effectively self-consumed energy. The Power-to-Methane strategy can exploit all the renewable excess once the system is properly sized, almost doubling the po... [more]

An anaerobic digestion process performed in two stages has the advantages of the production of hydrogen in addition to methane, and of further degradation of the substrate over the conventional process. The effectiveness of the implementation of this system for the treatment of lignocellulosic waste has been demonstrated. In 2020, more than 180 million tons of organic waste were generated worldwide from tomato crop production, posing a serious environmental risk. In the present investigation, methane production was compared in a two-stage system versus one-stage system from non-pretreated tomato plant residues. For this, different temperature (37 and 55 °C) and initial pH (5.5 and 6.5) conditions were evaluated during hydrogenesis and a constant temperature (37 °C, without pH adjustment) during methanogenesis. At the same time, a one-stage treatment (37 °C, without pH adjustment) was run for comparison purposes. The two-stage treatment in which the highest production of hydrogen, 12.4... [more]

Renewable energy supply is essential for carbon neutrality; however, technologies aiming to optimally utilize renewable energy sources remain insufficient. Seasonal variability in renewable energy is a key issue, which many studies have attempted to overcome through operating systems and energy storage. Currently, hydrogen is the only technology that can solve this seasonal storage problem. In this study, the amount of hydrogen required to circumvent the seasonal variability in renewable energy supply in Korea was quantified. Spatiotemporal analysis was conducted using renewable energy resource maps and power loads. It was predicted that 50% of the total power demand in the future will be met using solar and wind power, and a scenario was established based on the solar-to-wind ratio. It was found that the required hydrogen production differed by approximately four-times, depending on the scenarios, highlighting the importance of supplying renewable energy at an appropriate ratio. Spati... [more]

The consumption of fossil fuels is one of the main drivers of climate change. Lignin derived from biomass is a carbon-neutral raw feedstock, and its conversion into fuels is gaining much attention. The gasification of biomass aims to transform heterogeneous feedstocks into syngas and heat that could be used for various purposes. Lignin is a biomass feedstock of special interest due to its particular properties and its ability to be obtained in abundant quantities as a side product from the paper pulp industry as well as the growing cellulosic ethanol industry. This review explores the existing works regarding lignin gasification from different perspectives and compares the results obtained with other existing thermochemical processes, in addition to providing a perspective on the long-term fate of gasification as a technology compared to other emerging technologies. The analysis indicates that while lignin gasification may grow in importance in the near future due to increased interest... [more]

A numerical model of the micro-free-piston engine was developed and its correctness was verified by the comparison between the simulation and referential experiment results under the same work conditions. Based on this numerical model, the effects of the water vapor blending ratio (α) on combustion thermal performance and emission characteristics of hydrogen (H2) homogeneous charge compressing ignition (HCCI) were investigated numerically. The water vapor impact on combustion temperature was analyzed as well. The simulation results reveal that when the initial equivalent ratio is 0.5, blending H2 with water vapor can delay the ignition time and prolong the whole process. At the same time, the addition of water vapor to H2 decreases the peak combustion temperature and pressure, which will alleviate the detonation phenomenon of the combustion chamber. Moreover, the power output capacity and NOx emissions decrease with the increase in α. When α increases to 0.8, the mixture gas cannot be... [more]

Global transitions from carbon- to hydrogen-based economies are an essential component of curbing greenhouse gas emissions and climate change. This study provides an investigative review of the technological development trends within the overall hydrogen value chain in terms of production, storage, transportation, and application, with the aim of identifying patterns in the announcement and execution of hydrogen-based policies, both domestically within Korea, as well as internationally. The current status of technological trends was analyzed across the three areas of natural hydrogen, carbon dioxide capture, utilization, and storage technology linked to blue hydrogen, and green hydrogen production linked to renewable energy (e.g., water electrolysis). In Korea, the establishment of underground hydrogen storage facilities is potentially highly advantageous for the storage of domestically produced and imported hydrogen, providing the foundations for large-scale application, as economic f... [more]

Motor vehicles are the backbone of global transport. In recent years, due to the rising costs of fossil fuels and increasing concerns about their negative impact on the natural environment, the development of low-emission power supply systems for vehicles has been observed. In order to create a stable and safe global transport system, an important issue seems to be the diversification of propulsion systems for vehicles, which can be achieved through the simultaneous development of conventional internal combustion vehicles, electric vehicles (both battery and fuel cell powered) as well as combustion hydrogen-powered vehicles. This publication presents an overview of commercial vehicles (available on the market) powered by internal combustion hydrogen engines. The work focuses on presenting the development of technology from the point of view of introducing ready-made hydrogen-powered vehicles to the market or technical solutions enabling the use of hydrogen mixtures in internal combusti... [more]

In recent years, growing awareness about environmental issues is pushing humankind to explore innovative technologies to reduce the anthropogenic sources of pollutants. Among these sources, internal combustion engines in non-road mobile machinery (NRMM), such as agricultural tractors, are one of the most important. The aim of this work is to explore the possibility of replacing the conventional diesel engine with an electric powertrain powered by a hybrid storage system, consisting of a small battery pack and a fuel-cell system. The battery pack (BP) is necessary to help the fuel cell manage sudden peaks in power demands. Numerical models of the conventional powertrain and a fuel-cell tractor were carried out. To compare the two powertrains, work cycles derived from data collected during real operative conditions were exploited and simulated. For the fuel-cell tractor, a control strategy to split the electric power between the battery pack and the fuel cell was explored. The powertrain... [more]

With the growing need for decarbonization, the future gas demand will decrease and the necessity of a gas distribution network is at stake. A remaining industrial gas demand on the distribution network level could lead to industry becoming the main gas consumer supplied by the gas distribution network, leading to the question: can industry keep the gas distribution network alive? To answer this research question, a three-stage analysis was conducted, starting from a rough estimate of average gas demand per production site and then increasing the level of detail. This paper shows that about one third of the German industry sites investigated are currently supplied by the gas distribution network. While the steel industry offers new opportunities, the food and tobacco industry alone cannot sustain the gas distribution network by itself.

Green ammonia has potential as a zero-emissions energy vector in applications such as energy storage, transmission and distribution, and zero-emissions transportation. Renewable energy such as offshore wind energy has been proposed to power its production. This paper designed and analyzed an on-land small-scale power-to-ammonia (P2A) production system with a target nominal output of 15 tonnes of ammonia per day, which will use an 8 MW offshore turbine system off the coast of Nova Scotia, Canada as the main power source. The P2A system consists of a reverse osmosis system, a proton exchange membrane (PEM) electrolyser, a hydrogen storage tank, a nitrogen generator, a set of compressors and heat exchangers, an autothermal Haber-Bosch reactor, and an ammonia storage tank. The system uses an electrical grid as a back-up for when the wind energy is insufficient as the process assumes a steady state. Two scenarios were analyzed with Scenario 1 producing a steady state of 15 tonnes of ammonia... [more]

The hydrogen economy is one of the possible directions of development for the European Union economy, which in the perspective of 2050, can ensure climate neutrality for the member states. The use of hydrogen in the economy on a larger scale requires the creation of a storage system. Due to the necessary volumes, the best sites for storage are geological structures (salt caverns, oil and gas deposits or aquifers). This article presents an analysis of prospects for large-scale underground hydrogen storage in geological structures. The political conditions for the implementation of the hydrogen economy in the EU Member States were analysed. The European Commission in its documents (e.g., Green Deal) indicates hydrogen as one of the important elements enabling the implementation of a climate-neutral economy. From the perspective of 2050, the analysis of changes and the forecast of energy consumption in the EU indicate an increase in electricity consumption. The expected increase in the pr... [more]

Hydrogen has the potential to decarbonize a variety of energy-intensive sectors, including steel production. Using the life cycle assessment (LCA) methodology, the state of the art is given for current hydrogen production with a focus on the hydrogen carbon footprint. Beside the state of the art, the outlook on different European scenarios up to the year 2040 is presented. A case study of the transformation of steel production from coal-based towards hydrogen- and electricity-based metallurgy is presented. Direct reduction plants with integrated electric arc furnaces enable steel production, which is almost exclusively based on hydrogen and electricity or rather on electricity alone, if hydrogen stems from electrolysis. Thus, an integrated steel site has a demand of 4.9 kWh of electric energy per kilogram of steel. The carbon footprint of steel considering a European sustainable development scenario concerning the electricity mix is 0.75 kg CO2eq/kg steel in 2040. From a novel perspect... [more]

The production, storage, and use of hydrogen for energy purposes will become increasingly important during the energy transition. One way to use hydrogen is to apply it to power vehicles. This green technological solution affects low-emissions transport, which is beneficial and important, especially in cities. The authors of this article analyzed the use of hydrogen production infrastructure for bus propulsion in the city of Katowice (Poland). The methods, used in the study, included a greedy algorithm and cost methods, which were applied for the selection of vehicles and identification of the infrastructure for the production, storage and refueling of hydrogen, as well as to conduct the economic analysis during this term. The article presented the complexity of the techno-economic analysis of the infrastructure and its installation. The key element was the selection of the number of vehicles to the hydrogen production possibilities of an electrolyser and capabilities of the storage an... [more]

In this paper, the results of an experimental study on hydrogen production at a tungsten discharge electrode with negative polarity in the DC electrolysis of a typical 10 wt% Na2CO3 aqueous solution in three operational regimes (the Faradaic, transition, and plasma-driven solution electrolysis (PDSE)) are presented for the first time. To focus the study on hydrogen production, a flowing inert gas (argon) was used to transport the gas mixture produced at the discharge electrode and prevent any other potential chemical reactions. The results showed that the highest hydrogen production rate of 0.147 g(H2)/h was achieved in the cathodic PDSE regime at the applied DC voltage of 198 V. However, the energy yield of hydrogen production of 0.405 g(H2)/kWh obtained at the applied voltage range of 141−170 V in the PDSE regime was lower than that obtained in the Faradaic regime (0.867 g(H2)/kWh) at 28 V. The energy balance of hydrogen production in the cathodic PDSE regime for the typical aqueous... [more]

Hydrogen is a key enabler of a sustainable society. Refurbishment of the existing natural gas infrastructure for up to 100% H2 is considered one of the most energy- and resource-efficient energy transportation methods. The question remains whether the transportation of 100% H2 with reasonable adaptions of the infrastructure and comparable energy amounts to natural gas is possible. The well-known critical components for refurbishment, such as increased compressor power, reduced linepack as well as pipeline transport efficiencies, and their influencing factors were considered based on thermodynamic calculations with a step-by-step overview. A H2 content of 20−30% results in comparable operation parameters to pure natural gas. In addition to transport in pipelines, decentralized H2 production will also play an important role in addressing future demands.

In the context of the need to significantly reduce greenhouse gas emissions from personal transportation, a new process for the production of e-methanol is presented. It is a CO2 hydrogenation process, powered mainly by renewable energy sources such as photovoltaic electricity, with direct capture of carbon dioxide from the ambient air. With the main objective of estimating the feasibility and the impact of such a large-scale plant, the various components are evaluated in terms of masses and quantities necessary for an annual fuel production of 500,000 tons. The main reactor is analyzed to assess the required quantities of hydrogen and CO2. The production of hydrogen from the electrolysis of water is estimated, as well as the electrical power required and supplied by a large photovoltaic plant. The size of a realistic plant and its footprint are estimated. In addition, the mass of seawater to be desalinized and split in the electrolyser is calculated. The CO2 capture system is evaluate... [more]

Land available for energy production is limited in cities owing to high population density. To reach the net zero goal, cities contributing 70% of overall greenhouse gas emissions need to dramatically reduce emissions and increase self-sufficiency in energy production. Environmental infrastructures such as sewage treatment and incineration plants can be used as energy production facilities in cities. This study attempted to examine the effect of using environmental infrastructure such as energy production facilities to contribute toward the carbon neutrality goal through urban energy systems. In particular, since the facilities are suitable for hydrogen supply in cities, the analysis was conducted focusing on the possibility of hydrogen production. First, the current status of energy supply and demand, and additional energy production potential in sewage treatment and incineration plants in Seoul, were analyzed. Then, the role of these environmental infrastructures toward energy self-s... [more]

The Italian National Recovery and Resilience Plan (NRRP) includes, among other measures, investments in hydrogen vehicle refuelling stations, intending to promote the use of fuel cell electric vehicles (FCEVs) for long-haul freight transport. This paper evaluates the impact that this action could have on CO2 emissions and fuel consumption, focusing on a case study of the Campania region. The proposed approach, which can also be transferred to other geographical contexts, requires the implementation of a freight road transport simulation model; this model is based on the construction of a supply model, the estimation of road freight demand, and an assignment procedure for computing traffic flows. This study covers the period from 2025 to 2040, according to the forecasts of the NRRP and some assumptions on the action effects; moreover, it is assumed that hydrogen is entirely produced from renewable sources (green hydrogen). The key findings from three different scenarios show that saving... [more]