Browse
Records Added in April 2023
Records added in April 2023
Change month: January | February | March | April | May | June | July | August | September | October | November | December
8068. LAPSE:2023.27421
A Decoupling Rolling Multi-Period Power and Voltage Optimization Strategy in Active Distribution Networks
April 4, 2023 (v1)
Subject: Process Control
Keywords: active distribution network, benders decomposition, decoupled multiple periods, Model Predictive Control, reactive power and voltage optimization
With the increasing penetration of distributed photovoltaics (PVs) in active distribution networks (ADNs), the risk of voltage violations caused by PV uncertainties is significantly exacerbated. Since the conventional voltage regulation strategy is limited by its discrete devices and delay, ADN operators allow PVs to participate in voltage optimization by controlling their power outputs and cooperating with traditional regulation devices. This paper proposes a decoupling rolling multi-period reactive power and voltage optimization strategy considering the strong time coupling between different devices. The mixed-integer voltage optimization model is first decomposed into a long-period master problem for on-load tap changer (OLTC) and multiple short-period subproblems for PV power by Benders decomposition algorithm. Then, based on the high-precision PV and load forecasts, the model predictive control (MPC) method is utilized to modify the independent subproblems into a series of subprob... [more]
8069. LAPSE:2023.27420
Simplified Assessment on the Wind Farm Noise Impact of the E2O Experimental Offshore Station in the Asturian Coast
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: E2O Offshore Experimental Station, noise impact, offshore wind farm, propagation, wind turbines
This paper presents a preliminary evaluation of the acoustic impact of an offshore experimental wind farm (E2O), conceived and planned to be installed in Asturias on Spain’s northwest coast. A simplified assessment of the wind turbines’ noise impact at an offshore platform was performed numerically, adapting commercial software for room acoustics to this particular application. As a result, the sound levels at specific receiver sites on the coastline were estimated to select the most convenient level between the two possible locations. Parameters from acoustic emission data of the selected wind turbines were introduced as inputs to the simulation, and the noise propagation in the analyzed domains (for different values of their basic parameters) was simulated. Complementarily, the numerical results were compared to calculations following the ISO 9613-2 standard on sound propagation outdoors for validation purposes, showing good overall agreement. The results revealed that both projected... [more]
8070. LAPSE:2023.27419
Multidimensional Analysis of Meat and Bone Meal (MBM) Incineration Process
April 4, 2023 (v1)
Subject: Food & Agricultural Processes
Keywords: meat and bone meal, multidimensional analysis, rotary kiln, thermal treatment of waste
This paper presents test results of thermal treatment (combustion) of meat and bone meal (MBM) within the context of an animal waste utilization plant. The test facility was equipped with a rotating combustion chamber. The energy and ecological aspects of the operation of this facility were analyzed. This article assesses the impact of the tested system on the natural environment with regard to the emission of pollutants into the atmosphere. In accordance with the chemical composition of the incinerated waste, the following compounds were analyzed: CO, NOx (nitrogen oxides), SO2, HCl, HF, TOC (total organic carbon) and dust. The concentrations recorded in periods of 0.5 and 24 h were in compliance with the admissible levels defined by European Union directives. An analysis of the energy efficiency of the energy recovery system used, which produces saturated steam for the technological needs of the utilization plant, was also carried out. The conditions for the achieved ecological and e... [more]
8071. LAPSE:2023.27418
Dynamic Modeling and Simulation of Non-Interconnected Systems under High-RES Penetration: The Madeira Island Case
April 4, 2023 (v1)
Subject: Modelling and Simulations
Keywords: BESS, high-RES penetration, Madeira island, non-interconnected island system, primary frequency control
The defossilization of power generation is a prerequisite goal in order to reduce greenhouse gas emissions and transit for a sustainable economy. Achieving this goal requires increasing the penetration of renewable energy sources (RESs) such as solar and wind power. The gradual shrinking of conventional generation units in an energy map introduces new challenges to the stability of power systems as there is a considerable reduction of stored rotational energy in the synchronous generators (SGs) and the capability to control their power output, which has been taken for granted until today. Inertia and primary reserve reduction have a substantial effect on the ability of the power system to maintain its security and self-resilience during contingency events. Such issues become more evident in the case of non-interconnected islands (NII) as they have unique features associated with their small size and low inertia. The present study examines in depth the NII system of Madeira, which is co... [more]
8072. LAPSE:2023.27417
Variations in Minority Carrier-Trapping Effects Caused by Hydrogen Passivation in Multicrystalline Silicon Wafer
April 4, 2023 (v1)
Subject: Food & Agricultural Processes
Keywords: grain boundary, hydrogen passivation, multicrystalline silicon, photoconductance, trapping effect
In a multicrystalline silicon (mc-Si) wafer, trapping effects frequently occur in the carrier lifetime measurement based on the quasi-steady-state photoconductance (QSSPC) technique. This affects the accurate measurement of the carrier lifetime of an mc-Si solar cell by causing distortions at a low injection level close to the Pmax point. Therefore, it is necessary to understand this effect and effectively minimize the trapping-center density. In this study, the variations in the minority carrier-trapping effect of hydrogen at different annealing temperatures in an mc-Si were observed using QSSPC, time-of-flight secondary ion mass spectroscopy, and atom probe tomography. A trapping effect was confirmed and occurred in the grain boundary area, and the effect was reduced by hydrogen. Thus, in an mc-Si wafer, effective hydrogen passivation on the grain area and grain boundary is crucial and was experimentally proven to minimize the distortion of the carrier lifetime.
8073. LAPSE:2023.27416
Probabilistic Approaches to the Security Analysis of Smart Grid with High Wind Penetration: The Case of Jeju Island’s Power Grids
April 4, 2023 (v1)
Subject: Modelling and Simulations
Keywords: Monte-Carlo simulation, parameter estimation, power flow calculation, power grid security limit, Weibull distribution
As the importance of renewable generating resources has grown around the world, South Korea is also trying to expand the proportion of renewable generating resources in the power generation sector. Among the various renewable energy sources, wind generating resources are emerging as a key alternative to conventional power generations in the electricity sector in Korea accounted for 17.7 GW of total capacity by 2030. As wind generating resources are gradually replacing traditional generating resources, the system security and reliability are negatively affected because of the variability, due to intermittent outputs. Therefore, existing power grids will need to be correctly re-measured to cover the large scale of renewable energy, including wind generation. To expand the grid, we must understand the characteristics of renewable energy and the impact of its adoption in the grid. In this paper, we analyze various characteristics of wind power generation, and then we propose a probabilisti... [more]
8074. LAPSE:2023.27415
Design of Microgrid Protection Schemes Using PSCAD/EMTDC and ETAP Programs
April 4, 2023 (v1)
Subject: Process Design
Keywords: ETAP, fault current analysis, microgrid, protection system, PSCAD/EMTDC
Steady-state, harmonics, and transient analysis of a power system by using a detailed simulation model is essential to microgrid operation before the installation of new power facilities, because the microgrid, which is a small-scale independent power grid consisting of distributed resources and an energy storage system, has no choice but to include many inverters consisting of switching devices. Accordingly, in the case of an accident in a microgrid system, various power system simulation tools must be used to calculate the fault current for grid protection components. Specifically, Modelling using Power System Computer Aided Design (PSCAD)/Electro-Magnetic Transient Design and Control (EMTDC) can perform detailed modeling of switching devices into each inverter, and Electrical Transient Analyzer Program (ETAP) can design protection relays. From this perspective, this study designed whole protection components in a microgrid system, including the capacity of switching devices for faul... [more]
8075. LAPSE:2023.27414
Power Loss-Aware Transactive Microgrid Coalitions under Uncertainty
April 4, 2023 (v1)
Subject: Energy Management
Keywords: Bayesian coalitional game, energy trading, microgrid, smart grid, transactive distribution system
Peer-to-peer energy trading within microgrid (MG) communities emerges as a key enabler of the future transactive distribution system and the transactive electricity market. Energy trading within MGs refers to the idea that the surplus energy of one MG can be used to satisfy the demand of another MG or a group of MGs that form an MG community. These communities can be dynamically established through time, based on the variations of demand and supply of the interconnected MGs. In many modern MGs, Electric Vehicles (EVs) have been considered as a viable storage option due to their ease of use (plug-and-play) and their growing adoption rates by drivers. On the other hand, the dynamic nature of EVs escalates the uncertainty in the transactive distribution system. In this paper, we study the problem of energy trading among MGs and EVs with the aim of power loss minimization where there is uncertainty. We propose a novel Bayesian Coalition Game (BCG) based algorithm, which allows the MGs and... [more]
8076. LAPSE:2023.27413
Study on the Entropy Generation Distribution Characteristics of Molten Carbonate Fuel Cell System under Different CO2 Enrichment Conditions
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: Carbon Dioxide Capture, entropy generation, exergy destruction, molten carbonate fuel cell
The efficient and clean use of fuel is very important for the sustainable development of energy. In this article, a numerical study of molten carbonate fuel cell (MCFC) unit is carried out, and the source, distribution, and extent of six irreversible losses (fluid friction loss, mass transfer loss, ohmic loss, activation loss, heat transfer loss, the coupling loss between heat and mass transfer) are described and quantified. The effects of the operation temperature, current density, CO2 concentration, and cathode CO2 utilization rate on the exergy destruction and exergy efficiency during the power generation process are investigated. The results show that the main source of entropy generation in MCFC is the potential difference, which affects the ohmic and activation entropy generation, especially when the CO2 concentration is very low. The second is the temperature gradient, which causes the entropy production of the heat transfer. With the rise of the CO2 concentration at the cathode... [more]
8077. LAPSE:2023.27412
A Higher Order Mining Approach for the Analysis of Real-World Datasets
April 4, 2023 (v1)
Subject: Process Control
Keywords: clustering analysis, data mining, district heating substations, Fault Detection, higher order mining, minimum spanning tree, outlier detection
In this study, we propose a higher order mining approach that can be used for the analysis of real-world datasets. The approach can be used to monitor and identify the deviating operational behaviour of the studied phenomenon in the absence of prior knowledge about the data. The proposed approach consists of several different data analysis techniques, such as sequential pattern mining, clustering analysis, consensus clustering and the minimum spanning tree (MST). Initially, a clustering analysis is performed on the extracted patterns to model the behavioural modes of the studied phenomenon for a given time interval. The generated clustering models, which correspond to every two consecutive time intervals, can further be assessed to determine changes in the monitored behaviour. In cases in which significant differences are observed, further analysis is performed by integrating the generated models into a consensus clustering and applying an MST to identify deviating behaviours. The vali... [more]
8078. LAPSE:2023.27411
Towards a Holistic Microgrid Performance Framework and a Data-Driven Assessment Analysis
April 4, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: dynamic time warping, key performance indicators, microgrid, performance, t-SNE
On becoming a commodity, Microgrids (MGs) have started gaining ground in various sizes (e.g., nanogrids, homegrids, etc.) and forms (e.g., local energy communities) leading an exponential growth in the respective sector. From demanding deployments such as military bases and hospitals, to tertiary and residential buildings and neighborhoods, MG systems exploit renewable and conventional generation assets, combined with various storage capabilities to deliver a completely new set of business opportunities and services in the context of the Smart Grid. As such systems involve economic, environmental and technical aspects, their performance is quite difficult to evaluate, since there are not any standards that cover all of these aspects, especially during operational stages. Towards allowing an holistic definition of a MG performance, for both design and operational stages, this paper first introduces a complete set of Key Performance Indicators to measure holistically the performance of a... [more]
8079. LAPSE:2023.27410
Analysis of the Development and Parameters of a Public Transport System Which Uses Low-Carbon Energy: The Evidence from Poland
April 4, 2023 (v1)
Subject: Environment
Keywords: electric buses, greenhouse gas emissions, low carbon energy public transport, Polish city, public transport, sustainable development
Efforts toward a low-emission economy constitute a common challenge for Polish cities. Solutions are being sought to support Polish, medium-sized cities, that is, cities with about 140,000 inhabitants, to implement and develop low-carbon energy in their public transport systems. This paper proposes and explores a sustainable urban development card for a Polish city, namely, Zielona Góra, the use of which will enable the effects of a public transport system using low-carbon energy to be monitored. This research was based on the two main areas of analysis of a system of low-carbon energy and public transport and were formulated as: (1) Sustainable Development Goals (SDGs) and (2) Indicators of the Satisfaction Rate of Public Transport Passengers (SPTP). This paper used literature studies to determine SDGs as well a questionnaire-cum-survey, which was conducted on a sample of 1022 public transport passengers in Zielona Góra, Poland, to determine SPTP. The results were verified by a real c... [more]
8080. LAPSE:2023.27409
An Overview on Energy and Development of Energy Integration in Major South Asian Countries: The Building Sector
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: buildings energy consumption, ECPC, GDP, HDI, renewable energy resources
India, Pakistan, and Bangladesh (IPB) are the largest South Asian countries in terms of land area, gross domestic product (GDP), and population. The growth in these countries is impacted by inadequate renewable energy policy and implementation over the years, resulting in slow progress towards human development and economic sustainability. These developing countries are blessed with huge potential for renewable energy resources; however, they still heavily rely on fossil fuels (93%). IPB is a major contributor to the total energy consumption of the world and its most energy-intensive building sector (India 47%, Pakistan 55% and Bangladesh 55%) displays inadequate energy performance. This paper comprehensively reviews the energy mix and consumption in IPB with special emphasis on current policies and its impact on economic and human development. The main performance indicators have been critically analyzed for the period 1970−2017. The strength of this paper is a broad overview on energ... [more]
8081. LAPSE:2023.27408
Client-Aware Negotiation for Secure and Efficient Data Transmission
April 4, 2023 (v1)
Subject: Process Design
Keywords: client-aware negotiation, data security transmission, energy saving, SSL/TLS protocol, two-way authentication
In Wireless Sensor Networks (WSNs), server clusters, and other systems requiring secure transmission, the overhead of data encryption and transmission is often not negligible. Unfortunately, a conflict exists between security and efficiency in processing data. Therefore, this paper proposes a strategy to overcome this conflict, called Client-Aware Negotiation for Secure and Efficient Data Transmission (CAN-SEAT). This strategy allows a client with different security transmission requirements to use the appropriate data security transmission without modifying the client. Two methods are designed for different clients. The first method is based on two-way authentication and renegotiation. After handshakes, the appropriate data security transmission scheme is selected according to the client requirements. Another method is based on redirection, which can be applied when the client does not support two-way authentication or renegotiation. For the characteristics of different architecture,... [more]
8082. LAPSE:2023.27407
Influence of the Use of Liquefied Petroleum Gas (LPG) Systems in Woodchippers Powered by Small Engines on Exhaust Emissions and Operating Costs
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: Alternative Fuels, liquefied petroleum gas LPG, small engine, toxic exhaust gases emission, woodchipper
The use of alternative fuels is a contemporary trend in science aimed at the protection of non-renewable resources, reducing the negative impact on people and reducing the negative impact on the natural environment. Liquefied petroleum gas (LPG) is an alternative fuel within the meaning of the European Union Directive (2014/94/UE), as it is an alternative for energy sources derived from crude oil. The use of LPG fuel in low-power internal combustion engines is one of the currently developed scientific research directions. It results from the possibility of limiting air pollutant emissions compared to the commonly used gasoline and the lower cost of this fuel in many countries. By “gasoline 95” the Authors mean non-lead petrol as a flammable liquid that is used primarily as a fuel in most spark-ignited internal combustion engines, whereas 95 is an octane rating (octane number). This article presents the results of research on fuel consumption, toxic exhaust gas emission, and operating c... [more]
8083. LAPSE:2023.27406
Off-Grid DoA Estimation on Non-Uniform Linear Array Using Constrained Hermitian Matrix
April 4, 2023 (v1)
Subject: Modelling and Simulations
Keywords: atomic norm minimization (ANM), continuous compressive sensing, non-uniform linear array (NULA), off-grid direction-of-arrival (DoA) estimation, super-resolution
In this paper, an off-grid direction-of-arrival (DoA) estimation algorithm which can work on a non-uniform linear array (NULA) is proposed. The original semidefinite programming (SDP) representation of the atomic norm exploits a summation of one-rank matrices constructed by atoms, where the summation of one-rank matrices equals a Hermitian Toeplitz matrix when using the uniform linear array (ULA). On the other hand, when the antennas in the array are placed arbitrarily, the summation of one-rank matrices is a Hermitian matrix whose diagonal elements are equivalent. Motivated by this property, the proposed algorithm replaces the Hermitian Toeplitz matrix in the original SDP with the constrained Hermitian matrix. Additionally, when the antennas are placed symmetrically, the performance can be enforced by adding extra constraints to the Hermitian matrix. The simulation results show that the proposed algorithm achieves higher estimation accuracy and resolution than other algorithms on both... [more]
8084. LAPSE:2023.27405
Implementation of Modeling Tools for Teaching Biorefinery (Focused on Bioethanol Production) in Biochemical Engineering Courses: Dynamic Modeling of Batch, Semi-Batch, and Continuous Well-Stirred Bioreactors
April 4, 2023 (v1)
Subject: Modelling and Simulations
Keywords: Biofuels, bioprocesses, challenge-based learning, computer-based learning, energy engineering, higher education
Due to the ever-growing pressure on our planet’s natural resources to supply energy, the production of bioethanol by fermentation of lignocellulosic biomass is increasingly important in courses related to engineering and energy. Moreover, recent changes in the teaching−learning paradigm make necessary the introduction of novel teaching tools where students are the protagonist of their education. In this context, the purpose of this study is to compare the results obtained after traditional lessons with those obtained after the implementation of various computer activities based on modeling and simulation of bioreactors to teach biorefinery concepts focused on bioethanol production. Berkeley Madonna was chosen as the digital simulation software package because it is user-friendly, fast, and easy to program. This software allowed students to gain experience writing models that let optimize fermentations in well-stirred bioreactors and others bioprocess of industrial interest. The student... [more]
8085. LAPSE:2023.27404
Economic Impacts of the Demand Response of Electric Vehicles Considering Battery Degradation
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: battery degradation, demand response, electric vehicle integration
The increase in the number of electric vehicles (EVs) has led to increased global expectations that the application of this technology may result in the reduction of CO2 emissions through the replacement of conventional petrol vehicles and ensure the flexibility of power systems such as batteries. In this paper, we propose a residential demand response (DR) evaluation model that considers the degradation mechanism of the EV battery and examines the effective battery operation. We adopted the already-proposed NiMnCo battery degradation model to develop an EV DR evaluation model. In this model, the battery operation is optimized to minimize the electricity and degradation costs affected by ambient temperature, battery state of charge (SOC), and depth of discharge. In this study, we evaluated the impact of the relevant parameters on the economics of the DR of EV batteries for 10 all-electric detached houses with photovoltaic system assuming multiple EV driving patterns and battery (dis)ch... [more]
8086. LAPSE:2023.27403
A Study on the Rotor Design of Line Start Synchronous Reluctance Motor for IE4 Efficiency and Improving Power Factor
April 4, 2023 (v1)
Subject: Process Design
Keywords: finite element analysis, international electrotechnical committee, line start synchronous reluctance motor, power factor, super premium efficiency
As international regulations of motor efficiency are strengthened, the line-start synchronous reluctance motor (LS-SynRM) is being studied to improve the efficiency of the electrical motor in industrial applications. However, in industrial applications, the power factor is also an important performance index, but the LS-SynRM has poor power factor due to the saliency characteristic. In this paper, the rotor design of LS-SynRM is performed to improve the efficiency and power factor. First, the barrier design is performed to improve the efficiency and power factor using the response surface method (RSM). Second, the rotor slot design is performed according to the length of bar for synchronization. Lastly, the rib design is performed to satisfy the power factor and the mechanical reliability. The final model through the design process is analyzed using finite element analysis (FEA), and the objective performance is satisfied. To verify the FEA result, the final model is manufactured, and... [more]
8087. LAPSE:2023.27402
A General and Accurate Measurement Procedure for the Detection of Power Losses Variations in Permanent Magnet Synchronous Motor Drives
April 4, 2023 (v1)
Subject: Other
Keywords: efficiency measurement, IPMSM, power loss minimization, speed control drive systems
The research of innovative solutions to improve the efficiency of electric drives is of considerable interest to challenges related to energy savings and sustainable development. In order to successfully validate the adoption of new and innovative software or hardware solutions in the field of electric drives, accurate measurement procedures for either efficiency or power losses are needed. Moreover, high accuracy and expensive measurement equipment are required to satisfy international standard prescriptions. In this scenario, this paper describes an accurate measurement procedure, which is independent of the accuracy of the adopted instrumentation, for the power losses variations involved in electrical drives, namely ΔΔP, useful to detect the efficiency enhancement (or power losses reduction) due to the real-time modification of the related control algorithm. The goal is to define a valuable measurement procedure capable of comparing the impact of different control algorithms on elec... [more]
8088. LAPSE:2023.27401
On Applications of Elements Modelled by Fractional Derivatives in Circuit Theory
April 4, 2023 (v1)
Subject: Modelling and Simulations
Keywords: circuit simulation, circuit theory, fractional calculus, transmission lines
In this paper, concepts of fractional-order (FO) derivatives are reviewed and discussed with regard to element models applied in the circuit theory. The properties of FO derivatives required for the circuit-level modeling are formulated. Potential problems related to the generalization of transmission-line equations with the use of FO derivatives are presented. It is demonstrated that some formulations of FO derivatives have limited applicability in the circuit theory. Out of the most popular approaches considered in this paper, only the Grünwald−Letnikov and Marchaud definitions (which are actually equivalent) satisfy the semigroup property and are naturally representable in the phasor domain. The generalization of this concept, i.e., the two-sided fractional Ortigueira−Machado derivative, satisfies the semigroup property, but its phasor representation is less natural. Other ideas (including the Riemann−Liouville and Caputo derivatives—with a finite or an infinite base point) seem to... [more]
8089. LAPSE:2023.27400
Nitrogen Deprivation in Fremyella diplosiphon Augments Lipid Production without Affecting Growth
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: biodiesel, Biomass, culture, cyanobacteria, growth, lipid, nitrogen
Metabolic products such as lipids and proteins produced in cyanobacteria represent an excellent source of biomass and do not compete with agricultural land use unlike soybean and corn. Given their potential use as novel materials for biodiesel production, we aimed to explore the effect of cultivation period and nitrogen concentration on the growth rate and lipid content of Fremyella diplosiphon, a model cyanobacterium. In this study, F. diplosiphon grown in BG11/HEPES medium supplemented with 1.5 g L−1 sodium nitrate (NaNO3) for 7, 10, 15, and 20 days were compared to the untreated control in media amended with 0.25, 0.5, and 1.0 g L−1 NaNO3. Cultures were inoculated in liquid media and grown under continuous fluorescent light in an orbital incubator shaker, and extracted lipids subjected to gravimetric analysis and gas chromatography-mass spectroscopy to determine the best culture conditions for lipid production. Our results demonstrated that a reduction in nitrogen concentration had... [more]
8090. LAPSE:2023.27399
“Fast Track” Analysis of Small Wind Turbine Blade Performance
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: BEM, blade design, rapid prototyping, small wind turbine (SWT), wind tunnel test
Small wind turbines (SWTs) can be significantly sensitive to variances in the blade geometry shape when their operation in relatively low ranges of Reynolds numbers is considered. An SWT case study, where an existing wind turbine prototype was equipped with a redesigned blade set, to increase its aerodynamic efficiency, is presented. The geometry modification process was targeted at maximizing the turbine power coefficient in the presumed point of low Reynolds operation. The applied design and analysis methods included practical implementation of previously established “Fast Track” procedure for wind turbine development. A newly prepared blade geometry and a reference blade set were examined numerically and experimentally. Selected design and assessment processes were supposed to be low resource demanding, making them possibly highly applicable in renewable energy industry. Therefore, the numerical analysis of both geometries was based on BEM (blade element momentum theory) equations.... [more]
8091. LAPSE:2023.27398
High-Resolution PV Forecasting from Imperfect Data: A Graph-Based Solution
April 4, 2023 (v1)
Subject: Information Management
Keywords: graph signal processing, multi-site photovoltaic forecasting, signal reconstruction, spatio-temporal correlation
Operating power systems with large amounts of renewables requires predicting future photovoltaic (PV) production with fine temporal and spatial resolution. State-of-the-art techniques combine numerical weather predictions with statistical post-processing, but their resolution is too coarse for applications such as local congestion management. In this paper we introduce computing methods for multi-site PV forecasting, which exploit the intuition that PV systems provide a dense network of simple weather stations. These methods rely entirely on production data and address the real-life challenges that come with them, such as noise and gaps. Our approach builds on graph signal processing for signal reconstruction and for forecasting with a linear, spatio-temporal autoregressive (ST-AR) model. It also introduces a data-driven clear-sky production estimation for normalization. The proposed framework was evaluated over one year on both 303 real PV systems under commercial monitoring across Sw... [more]
8092. LAPSE:2023.27397
SEPIC Converter with an LC Regenerative Snubber for EV Applications
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: electric vehicle, EMI suppression, regenerative snubber, SEPIC converter, snubber circuit
A Single-Ended Primary-Inductor Converter (SEPIC) converter with an Inductor-Capacitor (LC) regenerative snubber is proposed to reduce Electromagnetic Interference (EMI) for Electric Vehicle (EV) applications. The switching energy is transferred through a capacitor to an inductor which is coupled to SEPIC inductors. This technique reduces the number of components and also returns some of switching energy to SEPIC converter. The mathematical analysis and optimization of LC snubber with respect to number of turns is also presented. Spice simulations and experimental results are provided to verify its performance. The proposed LC regenerative snubber reduces the peak voltage by 16 V on the switching transistor during the switching transient. It is also indicated that 8 dB reduction is achieved in the EMI measurements at ringing frequency and 10 dB reduction at high frequency band.
[0.08 s]

