Browse
Records Added in April 2023
Records added in April 2023
Change year: 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | 2026
Change month: January | February | March | April | May | June | July | August | September | October | November | December
Showing records 8018 to 8042 of 9292. [First] Page: 1 318 319 320 321 322 323 324 325 326 Last
Experimental Investigation and Energy Performance Simulation of Mongolian Ger with ETS Heater and Solar PV in Ulaanbaatar City
Bat-Erdene Bayandelger, Yuzuru Ueda, Amarbayar Adiyabat
April 4, 2023 (v1)
Keywords: energy simulation, ETS heater, experimentation, Mongolian ger, solar PV
There are approximately 200,000 households living in detached houses and gers (yurts) with small coal stoves that burn raw coal in Ulaanbaatar city. A proper heating system and improvement of the energy efficiency of residential dwellings are vitally important for Ulaanbaatar city to reduce air pollution as well as for the operation of the current central energy system. This study shows the experimental results for two gers with two different heating systems and different thermal insulation, for investigating the merits of each. The technical feasibility of the system consisting of an electric thermal storage (ETS) heater with a daytime charging schedule and areal photovoltaic (PV) system was also examined by using a simulation with software developed in MATLAB (R2020a, MathWorks, USA). As a result of the experiment, the indoor comfort level and energy efficiency of the ger with added insulation and an ETS heater with nighttime charging were shown to be enhanced compared with those of... [more]
A Study of Design Variables in Daylight and Energy Performance in Residential Buildings under Hot Climates
Ali Mohammed AL-Dossary, Daeung Danny Kim
April 4, 2023 (v1)
Keywords: daylighting, design variables, energy consumption, hot climates, residential building
In Saudi Arabia, residential buildings are one of the major contributors to total energy consumption. Even though there are abundant natural resources, it is somewhat difficult to apply them to building designs, as design variables, due to slow progress and private issues in Saudi Arabia. Thus, the present study demonstrated the development of sustainable residential building design by examining the daylighting and energy performance with design variables. Focusing on the daylighting system, the design variables were chosen, including window-to-wall ratios (WWR), external shading devices, and types of glazing. The illuminance level by these design variables in a building was evaluated by using daylight metrics, such as spatial daylight autonomy and annual sunlight exposure. Moreover, the building energy consumption with these design variables was analyzed by using energy simulation. As a result, the daylighting was improved with the increase in WWRs and the tinted double glazing, while... [more]
Catchment Based Aerodynamic Performance Analysis of Small Wind Turbine Using a Single Blade Concept for a Low Cost of Energy
Hailay Kiros Kelele, Torbjørn Kirstian Nielsen, Lars Froyd, Mulu Bayray Kahsay
April 4, 2023 (v1)
Keywords: annual energy production, capacity factor, cost of energy, performance analysis, rated power, single blade concept
For low and medium wind conditions, there is a possibility to harness maximum wind potential reducing the cost of energy by employing catchment-based wind turbine designs. This paper aims to study catchment-based small wind turbine aerodynamic performance for improved efficiency and reduced cost of energy. Hence, design parameters are considered based on specific conditions within a catchment area. The bins and statistical methods implemented with Weibull distribution of wind data for selected sites to characterize the wind conditions and a weighted average method proposed to create representative wind conditions implementing a single blade concept. The blade element method was applied using Matlab code (version R2017a, MathWorks Inc., Natick, MA, US) for aerodynamic design and analysis, and computational fluid dynamics employed using ANSYS—Fluent (version 18.1, ANSYS Inc., Canonsburg, PA, USA) for validation. The performance of the designed blade is evaluated based on annual energy pr... [more]
Numerical Modelling and Experimental Verification of the Low-Emission Biomass Combustion Process in a Domestic Boiler with Flue Gas Flow around the Combustion Chamber
Przemysław Motyl, Danuta Król, Sławomir Poskrobko, Marek Juszczak
April 4, 2023 (v1)
Keywords: biomass combustion, CFD modeling, pellet boiler, renewable heating
The paper presents the results of numerical and experimental studies aimed at developing a new design of a 10 kW low-emission heating boiler fired with wood pellets. The boiler is to meet stringent requirements in terms of efficiency (η > 90%) and emissions per 10% O2: CO < 500 mg/Nm3, NOx ≤ 200 mg/Nm3, and dust ≤ 20 mg/Nm3; these emission restrictions are as prescribed in the applicable ECODESIGN Directive in the European Union countries. An innovative aspect of the boiler structure (not yet present in domestic boilers) is the circular flow of exhaust gases around the centrally placed combustion chamber. The use of such a solution ensures high-efficiency, low-emission combustion and meeting the requirements of ECODESIGN. The results of the numerical calculations were verified and confirmed experimentally, obtaining average emission values of the limited gases CO = 91 mg/Nm3, and NOx = 197 mg/Nm3. The temperature measured in the furnace is 450−500 °C and in the flue it was 157−197 °... [more]
Numerical Modeling of Ejector and Development of Improved Methods for the Design of Ejector-Assisted Refrigeration System
Hafiz Ali Muhammad, Hafiz Muhammad Abdullah, Zabdur Rehman, Beomjoon Lee, Young-Jin Baik, Jongjae Cho, Muhammad Imran, Manzar Masud, Mohsin Saleem, Muhammad Shoaib Butt
April 4, 2023 (v1)
Keywords: Computational Fluid Dynamics, ejectors, empirical correlation, refrigeration cycle
An ejector is a simple mechanical device that can be integrated with power generation or the refrigeration cycle to enhance their performance. Owing to the complex flow behavior in the ejector, the performance prediction of the ejector is done by numerical simulations. However, to evaluate the performance of an ejector integrated power cycle or refrigeration cycle, the need for simpler and more reliable thermodynamic models to estimate the performance of the ejector persists. This research, therefore, aims at developing a single mathematical correlation that can predict the ejector performance with reasonable accuracy. The proposed correlation relates the entrainment ratio and the pressure rise across the ejector to the area ratio and the mass flow rate of the primary flow. R141b is selected as the ejector refrigerant, and the results obtained through the proposed correlation are validated through numerical solutions. The comparison between the analytical and numerical with experimenta... [more]
Pawpaw (Carica papaya) Peel Waste as a Novel Green Heterogeneous Catalyst for Moringa Oil Methyl Esters Synthesis: Process Optimization and Kinetic Study
Babatunde Oladipo, Tunde V Ojumu, Lekan M Latinwo, Eriola Betiku
April 4, 2023 (v1)
Keywords: agricultural waste, biodiesel, catalyst, kinetics, plant oil, Taguchi method
This study evaluated pawpaw (Carica papaya) peel ash as a green solid base catalyst for Moringa oleifera oil methyl esters (MOOME) production. Taguchi orthogonal array approach was used to examine the impact of vital process input variables (calcined pawpaw peel (CPP) loading, reaction temperature, methanol-to-M. oleifera oil (MeOH:MOO) molar ratio and reaction time) on the MOOME yield. Catalytic potency potential of the CPP was evaluated by Fourier transform infrared (FTIR), Barrett-Joyner-Halenda (BJH), Brunauer-Emmett-Teller (BET), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) methods. The results obtained indicate that the CPP consists of nanoparticles and alkaline elements K (23.89 wt.%), Ca (2.86 wt.%) and Mg (1.00 wt.%). The high values of coefficient of determination, R2 (0.9992) and adjusted R2 (0.9968) as well as the low value of the coefficient of variation (0.31%) for the model developed indicate it can be used to... [more]
Life Cycle Performance of Various Energy Sources Used in the Czech Republic
Markéta Šerešová, Jiří Štefanica, Monika Vitvarová, Kristina Zakuciová, Petr Wolf, Vladimír Kočí
April 4, 2023 (v1)
Subject: Environment
Keywords: electricity generation, environmental impacts, environmental performance, life cycle assessment
As both the human population and living standards grow, so does the worldwide electricity demand. However, the power sector is also one of the biggest environmental polluters. Therefore, options are currently being sought aimed at reducing environmental impacts, one of the potential tools for which concerns the use of life cycle assessment. This study, therefore, focuses on the most commonly used nonrenewable (black coal, lignite, natural gas and nuclear) and renewable sources (wind, hydro and photovoltaic) in the Czech Republic in terms of their construction, operation, and decommissioning periods. Environmental impacts are assessed via the use of selected impact categories by way of product environmental footprint methodology. The results highlight the potential environmental impacts associated with electricity generation for each of the primary energy sources. Black coal and lignite power plants were found to contribute most to the global warming, resource use, energy carriers and r... [more]
Fluctuation Suppression of DC-Link Voltage Using Control of Converters Connected with DC Distributed Generation
Sang-Jae Choi, Sung-Hun Lim
April 4, 2023 (v1)
Keywords: DC power system, DC voltage fluctuation suppression, DC-linked battery, LVRT (low voltage ride through), renewable energy sources
Due to the increase in DC load and DC Power generation, the need for DC power system is emerging. Accordingly, FRT (fault ride through) and LVRT (low voltage ride through), which are related regulations for renewable energy sources, have been enacted, and operation algorithms of each converter are required for this. However, the operation of the converter according to LVRT regulations causes DC voltage fluctuations. In the current study, DC voltage fluctuation is suppressed through converter control of DC-linked battery. The controller was designed from the relational equation between DC voltage and instantaneous power of battery. The pattern of DC voltage fluctuations to the output of the PV (photovoltaic), which is a DC power generation source, was confirmed, and voltage fluctuation suppression was verified by applying the designed converter cooperation algorithm and controller.
Numerical Investigation of Performance and Flow Characteristics of a Tunnel Ventilation Axial Fan with Thickness Profile Treatments of NACA Airfoil
Yong-In Kim, Sang-Yeol Lee, Kyoung-Yong Lee, Sang-Ho Yang, Young-Seok Choi
April 4, 2023 (v1)
Keywords: axial fan, inlet recirculation, National Advisory Committee for Aeronautics (NACA) 3512, performance, thickness, tip leakage flow (TLF)
An axial flow fan, which is applied for ventilation in underground spaces such as tunnels, features a medium−large size, and most of the blades go through the casting process in consideration of mass production and cost. In the casting process, post-work related to roughness treatment is essential, and this is a final operation to determine the thickness profile of an airfoil which is designed from the empirical equation. In this study, the effect of the thickness profile of an airfoil on the performance and aerodynamic characteristics of the axial fan was examined through numerical analysis with the commercial code, ANSYS CFX. In order to conduct the sensitivity analysis on the effect of the maximum thickness position for each span on the performance at the design flow rate, the design of experiments (DOE) method was applied with a full factorial design as an additional attempt. The energy loss near the shroud span was confirmed with a quantified value for the tip leakage flow (TLF) r... [more]
Energy and Resource Efficiency in Apatite-Nepheline Ore Waste Processing Using the Digital Twin Approach
Maksim Dli, Andrei Puchkov, Valery Meshalkin, Ildar Abdeev, Rail Saitov, Rinat Abdeev
April 4, 2023 (v1)
Keywords: apatite-nepheline ore waste processing, computational intelligence for modeling and control, digital twin, energy and resource efficiency
The paper presents a structure of the digital environment as an integral part of the “digital twin” technology, and stipulates the research to be carried out towards an energy and recourse efficiency technology assessment of phosphorus production from apatite-nepheline ore waste. The problem with their processing is acute in the regions of the Russian Arctic shelf, where a large number of mining and processing plants are concentrated; therefore, the study and creation of energy-efficient systems for ore waste disposal is an urgent scientific problem. The subject of the study is the infoware for monitoring phosphorus production. The applied study methods are based on systems theory and system analysis, technical cybernetics, machine learning technologies as well as numerical experiments. The usage of “digital twin” elements to increase the energy and resource efficiency of phosphorus production is determined by the desire to minimize the costs of production modernization by introducing... [more]
Consumers’ Intention and Cognition for Low-Carbon Behavior: A Case Study of Hangzhou in China
Yongliang Yang, Yiyang Guo, Suqing Luo
April 4, 2023 (v1)
Subject: Energy Policy
Keywords: low-carbon behavior, low-carbon cognition, low-carbon intention
The influencing factors of the low-carbon consumption behavior of urban residents have become popular. This paper explored the factors of consumers’ low-carbon behavior through a questionnaire survey. Using Hangzhou as a case study city, which yields 786 valid responses, the results indicated that urban consumers generally had a high perception of low-carbon behavior. At the same time, low-carbon cognition and low-carbon intention had a positive impact on residents’ low-carbon behavior. In particular, the level of awareness of global warming adjusted residents’ understanding of low-carbon behavior. From a policy point of view, this research contributes to insights into the promotion of guiding residents’ low-carbon behavior and improving the response to global warming.
Experimental Study of Three-Bed Adsorption Chiller with Desalination Function
Karol Sztekler, Wojciech Kalawa, Wojciech Nowak, Lukasz Mika, Slawomir Gradziel, Jaroslaw Krzywanski, Ewelina Radomska
April 4, 2023 (v1)
Keywords: adsorption chiller, coefficient of performance, desalination, Energy Efficiency, low-temperature heat, silica gel, specific cooling power, waste heat recovery
Energy efficiency is one of the most important topics nowadays. It is strictly related to energy demand, energy policy, environmental pollution, and economic issues. Energy efficiency can be increased and operating costs reduced by using waste heat from other processes. One of the possibilities is to use sorption chillers to produce chilled water and desalinated water. Low-temperature waste heat is not easy to utilize because of the low energy potential. Using adsorption chillers in low-temperature conditions allows utilizing waste heat and producing useful products in many regions of the world. The paper presents the results of an experimental study carried out on a three-bed adsorption chiller with desalination function, using silica gel and water as a working pair. The laboratory test stand included one evaporator, one condenser, and three separate tanks for water, desalinated water, and brine, respectively. The test stands scheme and description were presented. All results were obt... [more]
Effect of Diatomaceous Biosilica and Talc on the Properties of Dielectric Elastomer Based Composites
Ewa Olewnik-Kruszkowska, Weronika Brzozowska, Arkadiusz Adamczyk, Magdalena Gierszewska, Izabela Wojtczak, Myroslav Sprynskyy
April 4, 2023 (v1)
Subject: Materials
Keywords: composites, diatomaceous biosilica, dielectric constant, dielectric elastomer, talc
Currently, scientists are still looking for new polymeric materials characterized by improved mechanical, thermal as well as dielectric properties. Moreover, it should be stressed that new composites should be environmentally friendly. For this reason, the aim of this work is to establish the influence of natural fillers in the form of diatomaceous biosilica (B) and talc (T) on the properties of dielectric elastomer (DE)-based composites. The dielectric elastomer-based materials have been tested taking into account their morphology, thermal and mechanical properties. Moreover, the dielectric constant of the obtained materials was evaluated. Obtained results revealed that the presence of both diatomaceous biosilica and talc significantly increases dielectric properties while having no significant effect on the mechanical properties of the obtained composites. It should be stressed that the performed analyses constitute a valuable source of knowledge on the effective modification of the... [more]
Economic Energy Efficiency of Food Production Systems
Bartłomiej Bajan, Aldona Mrówczyńska-Kamińska, Walenty Poczta
April 4, 2023 (v1)
Keywords: agriculture, Energy Efficiency, energy intensity, energy use, food industry, food production, food systems
The current global population growth forecast carries with it a global increase in demand for food. In order to meet this demand, it is necessary to increase production, which requires an increase in energy consumption. However, forecasted energy production growth is insufficient and traditional sources of energy are limited; hence, it is necessary to strive for greater energy efficiency in food production systems. The study aimed to compare the economic energy efficiency of food production systems in selected countries and identify the sources of diversification in this field. As a measure of energy efficiency, the indicators of the energy intensity of food production were used in this study. To calculate these indicators, a method based on input-output life-cycle assessment assumptions was used, which enables researchers to obtain fully comparable results between countries. The study showed that despite an increase in energy consumption in the food production systems of the analyzed... [more]
Polymer Electrolyte Fuel Cell Degradation Mechanisms and Their Diagnosis by Frequency Response Analysis Methods: A Review
Antonio Sorrentino, Kai Sundmacher, Tanja Vidakovic-Koch
April 4, 2023 (v1)
Keywords: degradation, frequency response analysis, impedance, PEMFC diagnosis, polymer electrolyte membrane fuel cell
Several experimental techniques involving dynamic electrical variables are used to study the complex behaviour of polymer electrolyte membrane fuel cells in order to improve performance and durability. Among them, electrochemical impedance spectroscopy (EIS) is one of the most employed methods. Like any frequency response analysis (FRA) methodology, EIS enables one to separate the contribution of many processes to performance losses. However, it fails to identify processes with a similar time constant and the interpretation of EIS spectra is often ambiguous. In the last decade, alternative FRA methodologies based on non-electrical inputs and/or outputs have been developed. These studies were mainly driven by requirements for a better diagnosis of polymer electrolyte membrane fuel cells (PEMFCs) faulty operation conditions as well as better component and material design. In this contribution, a state-of-the-art EIS and novel FRA techniques for PEMFC diagnosis are summarised. First, comm... [more]
Numerical Calculation and Uncertain Optimization of Energy Conversion in Interior Ballistics Stage
Tong Xin, Guolai Yang, Liqun Wang, Quanzhao Sun
April 4, 2023 (v1)
Subject: Optimization
Keywords: energy calculation of gun firing system, Energy Conversion, energy distribution, Energy Efficiency, uncertain optimization
Gun firing is a process that converts propellant chemical energy to projectile kinetic energy and other kinds of energies. In order to explore the energy conversion process, firstly, the interior ballistics mathematical model and the barrel-projectile finite element model are built and solved. Then, the related variable values and energy values are obtained and discussed. Finally, for improving energy efficiency, the interval uncertainty optimization problem is modeled, and then solved using the two-layer nested optimization strategy and back-propagation (BP) neural network surrogate model. Calculation results show that, after optimization, the heat efficiency raises from 31.13% to 33.05% and the max rifling stress decreases from 893.68 to 859.76 Mpa, which would improve the firing performance and prolong the lifetime of the gun barrel.
Frequency-Domain Modeling of Harmonic Interactions in Voltage-Source Inverters with Closed-Loop Control
Malte John, Axel Mertens
April 4, 2023 (v1)
Keywords: closed-loop control, frequency-domain model, harmonic analysis, power converters, pulse-width modulation (PWM), voltage-source inverter (VSI)
Power electronic converters, together with their loads, sources, and controls, form a coupled system that includes many nonlinear interactions, for instance due to pulse-width modulation (PWM) and feedback control. In this paper we develop a complete, nonlinear modeling approach for voltage-source inverters in the frequency domain, taking into account the harmonic components introduced into the system from the inputs and from the nonlinear digital PWM. The most important contribution is a method for analyzing how these harmonics propagate through the nonlinear system in steady state. To enable this, an analytic model of PWM with arbitrary, multiple-frequency input is necessary. A revised model of Asymmetrical regularly-sampled double-edge PWM (AD-PWM) is proposed and its incorporation into the system model regarding sampling effects is discussed. The resulting nonlinear equation system is numerically and simultaneously solved, yielding the spectra of all relevant signals in the convert... [more]
Thermal Performance of an Energy Pile Group with a Deeply Penetrating U-Shaped Heat Exchanger
Weidong Lyu, Hefu Pu, Jiannan (Nick) Chen
April 4, 2023 (v1)
Keywords: deeply penetrating U-shaped configuration, energy piles, geothermal energy, heat exchanger, parametric analysis, pile group
This study presents a novel heat exchanger configuration, called a deeply penetrating U-shaped configuration, for energy piles. The outlet water temperature, temperature variation along the tube, and heat transfer rate are simulated and computed using Comsol Multiphysics software. The simulations are for the cooling mode. The proposed configuration is compared with traditional U-shaped and W-shaped configurations to prove its superiority. The thermal performance of the pile group is compared with that of a single pile to investigate the effects of the pile group on the heat transfer. A parametric analysis is performed to investigate the effects of several important parameters (i.e., pile spacing, pile diameter, soil type, and thermal parameters) on the heat transfer performance of an energy pile group with the proposed deeply penetrating U-shaped configuration. The results indicate that the corner pile indicates a nonnegligible heat transfer rate 6.8% and 9.9% higher than the central p... [more]
Explaining the Diffusion of Energy-Efficient Lighting in India: A Technology Innovation Systems Approach
Danish Ahmad Mir, Christopher N.H. Doll, Robert Lindner, Muhammad Tabish Parray
April 4, 2023 (v1)
Keywords: developing countries, energy-efficient technologies, LED, low-carbon technology transfer, Renewable and Sustainable Energy, technology innovation systems (TIS)
Electricity consumption from lighting accounts for about 15% of total power demand and 5−6% of greenhouse gas emissions in developing countries. It is therefore a promising avenue to achieve considerable energy savings through technological innovation and upgrading. India has been very successful in recent years with a nationwide roll-out of modern light-emitting diode (LED) applications. This study uses the framework of technology innovation systems to identify the actors, institutions, and processes behind the diffusion of this technology. Our findings indicate that national innovation strategies, along with low-carbon technology (LCT) transfer policies, helped to bring down the cost of LED lamps in a rapidly expanding domestic market. Based on the findings, we further explore lessons for broader issues of low-carbon technology transfer and suggest an emerging intermediate step between north−south and south−south technology transfer.
Dynamic Response Analysis of a Semi-Submersible Floating Wind Turbine in Combined Wave and Current Conditions Using Advanced Hydrodynamic Models
Takeshi Ishihara, Yuliang Liu
April 4, 2023 (v1)
Keywords: combined wave and current conditions, directional spreading function, dynamic response, hydrodynamic models, mooring tension, semi-submersible floating offshore wind turbine
In this study, advanced hydrodynamic models are proposed to predict dynamic response of a floating offshore wind turbine (FOWT) in combined wave and current conditions and validated by laboratory and full-scale semi-submersible platforms. Firstly, hydrodynamic coefficient models are introduced to evaluate the added mass and drag coefficients in a wide range of Reynolds numbers. An advanced hydrodynamic model is then proposed to calculate the drag force of cylinder in combined wave and current conditions. The proposed model is validated by the water tank tests in the current-only, wave-only and current-wave conditions and is used to investigate the effect of current on the dynamic response of FOWT. Finally, the full-scale semi-submersible platform used in the Fukushima demonstration project is investigated. It is found that the predicted dynamic responses of platform by the proposed hydrodynamic models are improved by the directional spreading function of the sea wave spectrum and show... [more]
Bioclimatic Architecture and Urban Morphology. Studies on Intermediate Urban Open Spaces
Alessandra Battisti
April 4, 2023 (v1)
Keywords: adapting to change, climate performance, innovative technologies, resilience, urban regeneration
This paper deals with the interactions between biophysical and microclimatic factors on the one hand with, on the other, the urban morphology of intermediate urban open spaces, the relationship between environmental and bioclimatic thermal comfort, and the implementation of innovative materials and the use of greenery, aimed at the users’ well-being. In particular, the thermal comfort of the open spaces of the consolidated fabrics of the city of Rome is studied, by carrying out simulations of cooling strategies relating to two scenarios applied to Piazza Bainsizza. The first scenario involves the use of cool materials for roofs, cladding surfaces, and pavement, while the second scenario, in addition to the cool materials employed in the first scenario, also includes the use of greenery and permeable green surfaces. The research was performed using summer and winter microclimatic simulations of the CFD (ENVI-met v. 3.1) type, in order to determine the different influences of the materia... [more]
A Model for Cost−Benefit Analysis of Privately Owned Vehicle-to-Grid Solutions
Jesús Rodríguez-Molina, Pedro Castillejo, Victoria Beltran, Margarita Martínez-Núñez
April 4, 2023 (v1)
Keywords: cost–benefit analysis, electric vehicle, vehicle-to-grid
Although the increasing adoption of electric vehicles (EVs) is overall positive for the environment and for the sustainable use of resources, the extra effort that requires purchasing an EV when compared to an equivalent internal combustion engine (ICE) competitor make them less appealing from an economical point of view. In addition to that, there are other challenges in EVs (autonomy, battery, recharge time, etc.) that are non-existent in ICE vehicles. Nevertheless, the possibility of providing electricity to the power grid via vehicle-to-grid technology (V2G), along with lower maintenance costs, could prove that EVs are the most economically efficient option in the long run. Indeed, enabling V2G would make EVs capable of saving some costs for their vehicle owners, thus making them a better long-term mobility choice that could trigger deep changes in habits of vehicle owners. This paper describes a cost−benefit analysis of how consumers can make use of V2G solutions, in a way that th... [more]
Modeling of Working Machines Synergy in the Process of the Hybrid Electric Vehicle Acceleration
Konrad Prajwowski, Wawrzyniec Golebiewski, Maciej Lisowski, Karol F. Abramek, Dominik Galdynski
April 4, 2023 (v1)
Keywords: acceleration, engine, generator, hybrid electric vehicle, Modelling, motor
There are many different mathematical models that can be used to describe relations between energy machines in the power-split hybrid drive system. Usually, they are created based on simulations or measurements in bench (laboratory) conditions. In that sense, however, these are the idealized conditions. It is not known how the internal combustion engine and electrical machines work in real road conditions, especially during acceleration. This motivated the authors to set the goal of solving this research problem. The solution was to implement and develop the model predictive control (MPC) method for driving modes (electric, normal) of a hybrid electric vehicle equipped with a power-split drive system. According to the adopted mathematical model, after determining the type of model and its structure, the measurements were performed. There were carried out as road tests in two driving modes of the hybrid electric vehicle: electric and normal. The measurements focused on the internal comb... [more]
Experimental Investigation of the Air Exchange Effectiveness of Push-Pull Ventilation Devices
Sven Auerswald, Carina Hörberg, Thibault Pflug, Jens Pfafferott, Constanze Bongs, Hans-Martin Henning
April 4, 2023 (v1)
Keywords: air exchange efficiency, decentralised ventilation, push-pull, ventilation effectiveness
The increasing installation numbers of ventilation units in residential buildings are driven by legal objectives to improve their energy efficiency. The dimensioning of a ventilation system for nearly zero energy buildings is usually based on the air flow rate desired by the clients or requested by technical regulations. However, this does not necessarily lead to a system actually able to renew the air volume of the living space effectively. In recent years decentralised systems with an alternating operation mode and fairly good energy efficiencies entered the market and following question was raised: “Does this operation mode allow an efficient air renewal?” This question can be answered experimentally by performing a tracer gas analysis. In the presented study, a total of 15 preliminary tests are carried out in a climatic chamber representing a single room equipped with two push-pull devices. The tests include summer, winter and isothermal supply air conditions since this parameter v... [more]
Development and Application of a Flexible Modeling Approach to Reference Buildings for Energy Analysis
Younghoon Kwak, Jeonga Kang, Sun-Hye Mun, Young-Sun Jeong, Jung-Ho Huh
April 4, 2023 (v1)
Keywords: building stock, energy analysis, flexible modeling approach, non-residential buildings, reference building
This paper proposes a flexible modeling approach to develop a theoretical reference building (RB) for energy analysis. We designed an RB for five non-residential buildings, using dynamic simulation from statistically analyzed data of building stock in South Korea. For modeling, four subsets of data—form, envelope, system, and operation—were assessed. This study uses the autosizing function within EnergyPlus, to develop the RB. The proposed approach allows for a flexible design where capacities and flow rates of the heating, ventilation, and air-conditioning (HVAC) system match the newly defined RB model. This approach would be ideal for closing the gap between the architectural data and equipment elements. The RB developed in this study allows for performing energy performance analysis by end-use. The analysis results by the end-use can provide support for country-level greenhouse gas (GHG)-mitigation-strategy development.
Showing records 8018 to 8042 of 9292. [First] Page: 1 318 319 320 321 322 323 324 325 326 Last
(0.06 seconds)
Change year: 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | 2026
Change month: January | February | March | April | May | June | July | August | September | October | November | December

[0.08 s]