The outbreak and rapid spread of the COVID-19 pandemic has hit the global financial markets, including the energy sector. Alternative energy belongs to the economy’s key sectors concerning environmental issues and seems to be a full-fledged alternative for fossil-based conventional energy. This paper aims to assess the impact of COVID-19 on the stock market indices related to the alternative and conventional energy sector. We use daily data on the Morgan Stanley Capital International (MSCI) Global Alternative Energy Index, the MSCI All Country World Index (ACWI) Energy Index, and self-developed Average-49 COVID-19 New Cases Index and Average-49 Stringency Index. The research covers the period January−October 2020. The average level of the MSCI Global Alternative Energy Index in COVID-19 year was more than a quarter higher than in 2019 while the MSCI ACWI Energy fell almost one-third in the same period. Based on the Markov-switching model, we show that both the MSCI Global Alternative E... [more]

The geometrical and mechanical properties of non-persistent joints as well as the mechanical behavior of intact rock (rock bridges) are significantly effective in the shear strength of weakness planes containing non-persistent joints. Therefore, comprehensive knowledge of the shear mechanism of both joints and rock bridges is required to assess the shear strength of the planes. In this study, the shear behavior of specimens containing a single non-persistent rough joint is investigated. A novel procedure was used to prepare cast specimens embedding a non-persistent (disc-shaped) rough joint using 3D printing and casting technology, and the shear strength of the specimens was examined through an extensive direct shear testing program under constant normal load (CNL) condition. Three levels for three different variables of the joint roughness, rock bridge ratio, and normal stress were considered, and the effects of these factors on the shear behavior of prepared samples were tested. The... [more]

Carbon quantum dots (CQDs) are nanomaterials with a particle size range of 2 to 10 nm. CQDs have a wide range of applications such as medical diagnostics, bio-imaging, biosensors, coatings, solar cells, and photocatalysis. Although the effect of various experimental parameters, such as the synthesis method, reaction time, etc., have been investigated, the effect of different feedstocks on CQDs has not been studied yet. In this study, CQDs were synthesized from hydroxymethylfurfural, furfural, and microcrystalline cellulose via hydrothermal carbonization at 220 °C for 30 min of residence time. The produced CQDs showed green luminescence behavior under the short-wavelength UV light. Furthermore, the optical properties of CQDs were investigated using ultraviolet-visible spectroscopy and emission spectrophotometer, while the morphology and chemical bonds of CQDs were investigated using transmission electron microscopy and Fourier-transform infrared spectroscopy, respectively. Results showe... [more]

The aim of this paper is to present a methodology for dimensioning an energy storage system (ESS) to the generation data measured in an operating wave energy generation plant connected to the electric grid in the north of Spain. The selection criterion for the ESS is the compliance of the power injected into the grid with a specific active-power ramp-rate limit. Due to its electrical characteristics, supercapacitor (SC) technology is especially suitable for this application. The ESS dimensioning methodology is based on a mathematical model, which takes into account the power generation system, the chosen ramp-rate limit, the ESS efficiency maps and electrical characteristics. It allows one to evaluate the number of storage cabinets required to satisfy the needs described, considering a compromise between the number of units, which means cost, and the reliability of the storage system to ensure the grid codes compliance. Power and energy parameters for the ESS are obtained from the calc... [more]

The new generation of capsules that circulate through vacuum tubes at speeds up to 1200 km/h, which is being developed, demands communication systems that can operate at these speeds with high capacity and quality of service. Currently, the two technologies available are the new generation of 802.11ax networks and 5G NR. Using these technologies at such high speeds in a confined environment requires a careful study and design of the configuration of the network and optimization of the physical interface. This paper describes the requirements for critical and business communications, proposing a WLAN and 5G network design based on the analysis of the propagation characteristics and constraints of vacuum tubes and using propagation measurements and simulations made in similar environments at frequencies of 2.5/5.7/24 GHz. These measurements and simulations show that propagation losses in this environment are low (4−5 dB/100 m), as a consequence of the guided propagation, so that the use... [more]

The behaviours of individual flow structures have become a relevant matter of study in turbulent flows as the computational power to allow their study feasible has become available. Especially, high instantaneous Reynolds Stress events have been found to dominate the behaviour of the logarithmic layer. In this work, we present a viability study where two machine learning solutions are proposed to reduce the computational cost of tracking such structures in large domains. The first one is a Multi-Layer Perceptron. The second one uses Long Short-Term Memory (LSTM). Both of the methods are developed with the objective of taking the the structures’ geometrical features as inputs from which to predict the structures’ geometrical features in future time steps. Some of the tested Multi-Layer Perceptron architectures proved to perform better and achieve higher accuracy than the LSTM architectures tested, providing lower errors on the predictions and achieving higher accuracy in relating the st... [more]

The determination of natural gas content in coal seams is essential to safe mining activities and to estimate gas resources. It is used to estimate methane emissions into workings, which is very important when using preventive measures of methane ignition and explosion. Methane content in a coal seam is mostly determined using a direct method. However, a problem with estimation of gas loss during collecting a sample in a mine occurs in each method. That gas loss is estimated using different procedures. In the Polish mining industry, methane content in a coal seam is mostly determined during roadway advancing faces in coal seams. The differences in procedures for determining methane content in coal in various laboratories gave rise to starting research into developing a new method. This article presents results of study of gas loss unification for the determination of methane content in coal seams. The research focused mainly on determining a uniform method for estimating gas loss using... [more]

More than 150 municipal utilities (so-called Stadtwerke) were established in Germany from the beginning of the millennium, bringing the total number of Stadtwerke currently established within the country to approximately 900. With responsibility for more than half of the supply of electricity, gas and heat in Germany, these Stadtwerke play a central role in the transformation of the energy sector, or Energiewende. In addition, due to their local and regional ties, Stadtwerke have a particular role to play in energy politics, the economy and across society. This article focuses on the motives behind, and grounds for, the current wave of newly established Stadtwerke. Further, it discusses the factors that were critical to the successful formation of new Stadtwerke in recent years. The results of our survey indicate that the establishment of municipal Stadtwerke is a suitable measure to implement the energy transition at the local level, whereby the concept of public value has a high leve... [more]

The COVID-19 pandemic and the associated lockdown can be regarded as a forced social experiment, the results of which show how to use energy under specific conditions. During this period, there was a reduction in electricity consumption at the level of the power system, but a different specificity distinguishes the group of household users. The article aims at presenting and analysing the identified issues concerning residential electricity users based on the experience from the COVID-19 pandemic lockdown. Data from energy meters from almost 7000 flats in Warsaw’s housing estates during the lockdown in 2020 and the analogous period before the pandemic were used. The analysis showed that, on average, residential users staying practically the whole day in their flats increased their energy consumption, but without increasing their average daily peak power, smoothing the profile in the morning hours to the level reaching the peak power that had occurred in the analogous period before the... [more]

Lithium-ion capacitors (LICs) have gained significant attention in recent years for their increased energy density without altering their power density. LICs achieve higher capacitance than traditional supercapacitors due to their hybrid battery electrode and subsequent higher voltage. This is due to the asymmetric action of LICs, which serves as an enhancer of traditional supercapacitors. This culminates in the potential for pollution-free, long-lasting, and efficient energy-storing that is required to realise a renewable energy future. This review article offers an analysis of recent progress in the production of LIC electrode active materials, requirements and performance. In-situ hybridisation and ex-situ recombination of composite materials comprising a wide variety of active constituents is also addressed. The possible challenges and opportunities for future research based on LICs in energy applications are also discussed.

In recent years, the dynamic development of renewable energy has been visible all over the world, including Poland. Wind energy is one of the most used renewable energy sources. In Poland, by 2030, it is planned to commission at least six offshore wind farms with a total capacity of 3.8 GW. It is estimated that these investments will increase Poland’s GDP by approximately PLN 60 billion and increase tax revenues by PLN 15 billion. Therefore, they could be a strong stimulus for the development of the Polish economy and may be of great importance in recovering from the crisis caused by the economic constraints related to the COVID-19 pandemic. The aim of the article is a multi-criteria evaluation of the investments planned in Poland in offshore wind farms and identification of potentially the most economically effective investments. To account for the uncertainty in this decision problem, a modified fuzzy Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method w... [more]

In this paper, we apply the Failure Modes, Effects, and Criticality Analysis (FMECA) approach to the criticality and risk analysis of the efficiency, safety/reliability, environment, and financial criteria of the high voltage transmission line. In the efficiency analysis, the weighting-scoring method and analytical hierarchy process are applied to obtain the line renovation index, which is interpreted as efficiency severity. The safety/reliability severity relates to the system impacts are caused by failure of the equipment and the system. The environmental severity takes social impacts and pollution into consideration. The financial severity involves the cost of spare parts and maintenance costs, which are interpreted as the financial severity of the lines. Twenty practical transmission lines in Thailand with actual data for 115, 230, and 500 kV were studied. The transmission line components are divided into eight components including the conductor, conductor accessories, insulator, s... [more]

This century registers a significant expansion in the wind power market. However, the vast majority of these investments are concentrated in large wind turbines. The century begins with an installed capacity of about 20 GW, which reaches 650 GW in 2019. On the other hand, it is important to highlight that small wind turbines have not followed this virtuous path, a fact that is evident in Brazil’s reality. In this context, the article aims at evaluating the current situation of the wind energy market for Small Wind Turbines in Brazil (SWT) and its future perspectives, identifying the main characteristics of the sector, its challenges, and opportunities. It is an exploratory−explanatory research study that investigates the theme, generating knowledge that turns to practical application, as it seeks answers to solve local interests. This methodological approach provides objective evidence that the production of knowledge about the use of SWT in Brazil still remains embryonic, shaded by th... [more]

Japan’s energy consumption in 2018 was about 2.5 times that in 1975, with the increase in the household sector being the largest at 28%. Most of primary energy is still fossil fuel, and it is urgent to reduce energy consumption in the household sector. The purpose of this paper was to identify ways to reduce household energy consumption without compromising the quality of life in residence. However, the reduction methods vary by region, building specifications, household type, equipment specifications, season, and weather. The value of this paper is based on a systematic analysis of home energy management systems (HEMS) data from about 50,000 households under various conditions. We are analyzing ways to reduce energy consumption. Few studies have analyzed this much back-up data, which is likely to lead to a reduction in CO2 emissions across the household sector. To explore ways to reduce energy consumption in this sector, the company has introduced and provided services for home energy... [more]

One of the recent trends that concern renewable energy sources and energy storage systems is the concept of virtual power plants (VPP). The majority of research now focuses on analyzing case studies of VPP in different issues. This article presents the investigation that is based on a real VPP. That VPP operates in Poland and consists of hydropower plants (HPP), as well as energy storage systems (ESS). For specific analysis, cluster analysis, as a representative technique of data mining, was selected for power quality (PQ) issues. The used data represents 26 weeks of PQ multipoint synchronic measurements for 5 related to VPP points. The investigation discusses different input databases for cluster analysis. Moreover, as an extension to using classical PQ parameters as an input, the application of the global index was proposed. This enables the reduction of the size of the input database with maintaining the data features for cluster analysis. Moreover, the problem of the optimal number... [more]

Among the variety of problems encountered in transmission lines, the outer jacket degradation-derived faults of communication cables in railway applications have a significant impact on the transmission line parameters, especially if the cables are exposed to extremely varying environmental conditions, such as temperature deviation and humidity changes. In this paper, an advanced model of a twisted pair communication cable is proposed, together with approximated degradation functions for distributed parameters of the model, such as the shielding inductance, resistance, and capacitance per meter of cable length. This allows for gathering the distributed parameters for the proposed model under specific environmental conditions. The degradation functions for the parameters have been identified and compared with simulation results, including the communication speed and frequency band, and it has been confirmed that the transmission reliability depends on the cable condition. The authors di... [more]

The drastic consequences of emergencies force us to look for ways to increase the stability of the device operation at overhead power transmission lines (OHPTL). It can be achieved by developing new algorithms for determining the protection operation setpoints and detecting the damage location. Fault detection at OHPTL of 10 kV and above is mainly carried out by the devices based on the measurement of emergency mode parameters. For fault detecting one should analyze the parameters of not only current and voltage at the accident time, but also of the overhead power line. Specific active resistance, specific reactance, specific active conductivity and specific reactive conductivity are used to characterize the overhead power transmission lines. As a rule, these parameters are normalized to the unit of length of the overhead line (OHL) and linear values are used in the calculations. When analyzing power lines, tabular approximate values of longitudinal and transversal parameters in equiva... [more]

In this paper, a device with swinging plate electrodes has been proposed to measure contact electrification of a liquid sample. The proposed structure is composed of two parallel metallic plates immersed in a dielectric liquid. One of the plates is swinging with a constant frequency in a range from 0.4 to 4 Hz. The paper investigates the dependence in time and frequency of electrode velocity and streaming electrification. The measured current occurs for a very low intermittent velocity of less than 10 mm/s. In this range, the electrification current is around 50 pA. For higher velocities of up to 150 mm/s, the current is at the level of 1200 pA. The time−frequency characteristic using short-time Fourier transform shows no temporal changes in the frequency spectrum. The dependence of electrification on shuttle speed was calculated and it can be approximated with a second order polynomial model with the determination coefficient higher than 0.9. The advantage of the sensor is the ability... [more]

The drilling process is complex because unexpected situations may occur at any time. Furthermore, the drilling system is extremely long and slender, therefore prone to vibrations and often being dominated by long transient periods. Adding the fact that measurements are not well distributed along the drilling system, with the majority of real-time measurements only available at the top side and having only access to very sparse data from downhole, the drilling process is poorly observed therefore making it difficult to use standard control methods. Therefore, to achieve completely autonomous drilling operations, it is necessary to utilize a method that is capable of estimating the internal state of the drilling system from parsimonious information while being able to make decisions that will keep the operation safe but effective. A solution enabling autonomous decision-making while drilling has been developed. It relies on an optimization of the time to reach the section total depth (TD... [more]

Fast development of centralized agricultural biogas plants leads to high amounts of digestate production. The treatment and disposal of liquid fractions after on-site digestate solid−liquid separation remains problematic due to their high organic, nutrient and aromatic contents. This work aims to study the variability of the remaining compounds in the digestate liquid fractions in relation to substrate origin, process parameters and solid−liquid separation techniques. Twenty-nine digestates from full-scale codigestion biogas plants and one waste activated sludge (WAS) digestate were collected and characterized. This study highlighted the combined effect of the solid−liquid separation process and the anaerobic digestion feedstock on the characteristics of liquid fractions of digestates. Two major clusters were found: (1) liquid fractions from high efficiency separation process equipment (e.g., centrifuge and others with addition of coagulant, flocculent or polymer) and (2) liquid fracti... [more]

In the context of the European Green Deal, the manufacturing industry faces environmental challenges due to its high demand for electrical energy. Thus, measures for improving the energy efficiency or flexibility are applied to address this problem in the manufacturing industry. In order to quantify energy efficiency or flexibility potentials, it is often necessary to predict or forecast the energy consumption. This paper presents a systematic review of state-of-the-art of existing approaches to predict or forecast the energy consumption in the manufacturing industry. Seventy-two articles are classified according to the defined categories System Boundary, Modelling Technique, Modelling Focus, Modelling Horizon, Modelling Perspective, Modelling Purpose and Model Output. Based on the reviewed articles future research activities are derived.

The importance and awareness of accurate online water quality measurements increase every year in the oil and gas sector, whether it is for reducing oil discharge, preparing produced water for reinjection, or improving operational performance. For online measurement techniques to yield valuable analytical information, an understanding of their outputs must be established. Produced water reinjection has gained increasing attention in the last decade, as it can minimize negative environmental impacts by reducing oil discharge and has the potential to extend the economic life of reservoirs. To increase the amount of produced water that can be reinjected, the water must be maintained at a sufficient quality to prevent unintended formation damage. This review paper thoroughly describes different water quality issues related to suspended solids that can occur in an injection water treatment system and how the issues are often interlinked. A case study of measuring the total suspended solids... [more]

The cost of solar-generated electricity and battery costs have been decreasing significantly. These developments can be combined to introduce solar-powered charging networks with demand management prices (DMP) to enable electric vehicle (EV) customers to help utilities to manage renewable energy. As solar-generated electricity becomes the cheapest source of power, the need to increase demand for electricity during the day can be met by charging EVs at an attractive DMP in parking lots with solar panels and charging stations that are connected to the electrical grid. The demand for electricity can be managed and controlled by the utility with the goal of increasing demand for power as needed so that all electricity that is generated can be sold. The proposal is to introduce a new DMP rate that is only implemented when the utility wants to increase demand and sell power at this low rate in order to make full use of the supply. As utilities strive to reach 100% renewable electrical power... [more]

Offshore wind is considered a crucial part in the future energy supply. However, influenced by weather conditions, the maintenance of offshore wind turbine system (OWTs) equipment is challenged by poor accessibility and serious failure consequences. It is necessary to study the optimized strategy of comprehensive maintenance for offshore wind farms, with consideration of the influences of incomplete equipment maintenance, weather accessibility and economic relevance. In this paper, a Monte Carlo algorithm-improved factor is presented to simulate the imperfect preventive maintenance activity, and waiting windows were created to study the accessibility of weather conditions. Based on a rolling horizon approach, an opportunity group maintenance model of an offshore wind farm was proposed. The maintenance correlations between systems and between equipment as well as breakdown losses, maintenance uncertainty, and weather conditions were taken into account in the model, thus realizing coordi... [more]

This study investigates geometric parameters of commercially available or recently published models of catalyst substrates for passenger vehicles and provides a numerical evaluation of their influence on heat-up behavior. Parameters considered to have a significant impact on the thermal economy of a monolith are: internal surface area, heat transfer coefficient, and mass of the converter, as well as its heat capacity. During simulation experiments, it could be determined that the primary role is played by the mass of the monolith and its internal surface area, while the heat transfer coefficient only has a secondary role. Furthermore, an optimization loop was implemented, whereby the internal surface area of a commonly used substrate was chosen as a reference. The lengths of the thin wall and high cell density monoliths investigated were adapted consecutively to obtain the reference internal surface area. The results obtained by this optimization process contribute to improving the hea... [more]