Biobutanol can be produced by Clostridia via an acetone−butanol−ethanol (ABE) fermentation under strictly anaerobic conditions. Oxygen-free nitrogen (OFN) gas is typically used to create anaerobic conditions for ABE fermentations. However, this method is not appropriate for large-scale fermentations as it is quite costly. The aim of this work was to study the feasibility of butanol production from sweet sorghum juice (SSJ) by Clostridium beijerinckii TISTR 1461 using various methods to create anaerobic conditions, i.e., growth of a strictly aerobic bacterium, an Arthrobacter sp., under different conditions and a chemical method using sodium dithionite (SDTN) to consume residual oxygen. SSJ containing 60 g/L of total sugar supplemented with 1.27 g/L of (NH4)2SO4 was used as a substrate for butanol production. The results showed that 0.25 mM SDTN could create anaerobic conditions, but in this case, C.beijerinckii TISTR 1461 could produce butanol at a concentration (PB) of only 8.51 g/L w... [more]

Hair follicles harbor a heterogeneous regenerative cell pool and represent a putative low-to-non-invasively available source of stem cells. We previously reported a technology for culturing human melanocytes from the hair follicle outer root sheath (ORS) for autologous pigmentation of tissue engineered skin equivalents. This study translated the ORS technology to horses. We de-veloped a culture of equine melanocytes from the ORS (eMORS) from equine forelock hair follicles cultured by means of an analogue human hair follicle-based in vitro methodology. The procedure was adjusted to equine physiology by addition of equine serum to the culture medium. The hair follicles were isolated by macerating forelock skin rests, enzymatically digested and subjected to air-medium-interface cultivation method. The procedure resulted in differentiated equine melanocytes, which exhibited typical morphology, presence of melanosomes, expression of cytoskeleton proteins vimentin, α-SMA, Sox2, S100ß and tyr... [more]

Alpha-lipoic acid (ALA, thioctic acid), a naturally-occurring essential dithiol compound, has become a common ingredient in many pharmaceutical and food supplement products (FSP), used in oxidative stress-dependent pathologies; oral bioavailability of ALA is limited by pharmacokinetic particularities that reduce its therapeutic efficacy-reduced solubility, lack of gastric stability and hepatic degradation, doubled by formulation hinders. The objectives were to develop a solid oral 600 mg ALA FSP to obtain an optimal pharmaceutical profile compared to a reference listed drug (RLD) with a similarity factor f2 50. A comparative dissolution study was performed; an HPLC method was used for ALA quantification. After planning combinatory simulations (formulation stage), two prototype formulas (#1 and #2) were manufactured and further optimized by adjusting ALA physical characteristics and the excipients quantities (#3 and #4) in order to achieve the Quality Target Product Profile. A misshapen... [more]

The main objective of this study is the synthesis, use, and reuse of magnetic copper ferrite nanospheres (CFNS) for extra-heavy oil viscosity reduction. The CFNS were synthesized using a solvothermal method resulting in mean particle size of 150 nm. Interactions of CFNS with the crude oil were evaluated through asphaltene adsorption isotherms, as well as static and dynamic rheology measurements for two cycles at 25 °C. Adsorption and desorption experiments corroborated that most of the asphaltenes adsorbed can be removed for nanoparticle reuse. During the rheology tests, nanoparticles were evaluated in the first cycle at different concentrations from 300 to 1500 mg/L, leading to the highest degree of viscosity reduction of 18% at 500 mg/L. SiO2 nanoparticles were evaluated for comparison issues, obtaining similar results regarding the viscosity reduction. After measurements, the CFNS were removed with a magnet, washed with toluene, and further dried for the second cycle of viscosity re... [more]

In order to exploit a fast-growing Paulownia hardwood as an energy crop, a xylose-enriched hydrolysate was obtained in this work to increase the ethanol concentration using the hemicellulosic fraction, besides the already widely studied cellulosic fraction. For that, Paulownia elongata x fortunei was submitted to autohydrolysis treatment (210 °C or S0 of 4.08) for the xylan solubilization, mainly as xylooligosaccharides. Afterwards, sequential stages of acid hydrolysis, concentration, and detoxification were evaluated to obtain fermentable sugars. Thus, detoxified and non-detoxified hydrolysates (diluted or not) were fermented for ethanol production using a natural xylose-consuming yeast, Scheffersomyces stipitis CECT 1922, and an industrial Saccharomyces cerevisiae MEC1133 strain, metabolic engineered strain with the xylose reductase/xylitol dehydrogenase pathway. Results from fermentation assays showed that the engineered S. cerevisiae strain produced up to 14.2 g/L of ethanol (corre... [more]

Diesel fuel mixtures with high concentrations of biodiesel have been investigated to analyze the technical feasibility of their use in diesel cycle engines regarding thermal and oxidative properties. The results of combined techniques of oxidative stability, high Pressurized Differential Scanning Calorimetry (P-DSC), Calculated Cetane Index (CCI), and calorific power were used to verify the effect of the thermal-oxidative stability as a function of the percentage of biodiesel in the mixtures. The obtained results evidenced that the thermal and oxidative stability decreased with the addition of biodiesel from 50 to 5% v/v. Low stability fuels require rapid use as the oxidation compounds degrade the product and impair vehicle performance, as well as lead to corrosion and clogging problems in various mechanical systems.

Continuous manufacturing opens up new operation windows with improved product quality in contrast to documented lot deviations in batch or fed-batch operations. A more sophisticated process control strategy is needed to adjust operation parameters and keep product quality constant during long-term operations. In the present study, the applicability of a combination of spectroscopic methods was evaluated to enable Advanced Process Control (APC) in continuous manufacturing by Process Analytical Technology (PAT). In upstream processing (USP) and aqueous two-phase extraction (ATPE), Raman-, Fourier-transformed infrared (FTIR), fluorescence- and ultraviolet/visible- (UV/Vis) spectroscopy have been successfully applied for titer and purity prediction. Raman spectroscopy was the most versatile and robust method in USP, ATPE, and precipitation and is therefore recommended as primary PAT. In later process stages, the combination of UV/Vis and fluorescence spectroscopy was able to overcome diffi... [more]

This study deals with wave-induced unsteady pressure on a ship moving with a constant forward speed in regular head waves. Two different numerical methods are applied to solve wave−ship interaction problems: a Rankine panel method which adopts velocity potential, and a Cartesian-grid method which solves the momentum and mass conservation equations under the assumption of inviscid and incompressible fluids. Before comparing l1ocal pressure distributions, the computational methods are validated for global quantities, such as ship motion responses and added resistance, by comparison with available experimental data. Then, the computational results and experimental data are compared for hydrodynamic pressure, particularly focusing on the magnitude of the first-harmonic component in different sections and vertical locations. Furthermore, the Cartesian-grid method is used to simulate the various wave-amplitude conditions, and the characteristics of the zeroth-, first-, and second-harmonic co... [more]

Fundamental studies involving divalent ion intercalated graphene-based hydrogel are still lacking in terms of their adsorption behavior towards dye pollutants. In this study, we prepared a self-assembled Mg2+ and Ca2+ intercalated reduced graphene hydrogel (rGH) using hydrothermal treatment to evaluate the intercalation impact on the adsorption capability towards cationic dyes, methylene blue and rhodamine B. The morphological, structural, thermal, and textural properties of the divalent ion intercalated reduced graphene hydrogels were studied using Fourier transform infrared spectrometer, thermogravimetric analysis, Raman spectroscopy, scanning electron microscope-energy dispersive spectroscopy, X-ray photoelectron spectroscopy, Brunauer−Emmett−Teller surface area analysis, and X-ray diffraction. The increased adsorption capacity of the divalent ion intercalated reduced graphene-based hydrogels towards the dye molecules resulted from the increase in the specific surface area and pore... [more]

A cost-effective and environmentally friendly method was formulated for rapid dopamine (DA) detection that was based on the fluorescence (FL) quenching of carbon quantum dots (C-dots). Upon adding DA to the C-dots’ solution, we noticed a regular reduction in their fluorescence intensity. The effects of pH, amount of C-dots, reaction temperature and time on the determination of DA were investigated. Under the optimized experimental conditions, trace amounts of DA could be analyzed. Furthermore, dopamine hydrochloride injection and human urine samples with and without spiked DA were analyzed using the developed sensing system. The procedure was validated following the guidelines of the European Medicines Agency (EMA) in terms of the following: calibration range (0.3−100 μM), linearity (R2 = 0.9991), limit of detection (LOD) (93 nM). Recoveries of dopamine with spiked samples at three different levels were between 95.0 and 105.9%, and the relative standard deviations (RSDs) were within 2.... [more]

As an alternative to gasoline, bioethanol can be produced from lignocellulosic biomass through hydrolysis using an ionic solution containing zinc chloride (ZnCl2). This method allows for a high yield of glucose from lignocellulose, but entails the removal of ZnCl2 from the hydrolysate using multiple nanofiltration membranes before the fermentation of glucose. This paper presents a mathematical technique for designing such a multistage membrane separation system. The optimization model for the synthesis of membrane networks is based on a superstructure with all feasible interconnections between the membrane units, and consists of mass balances, logical constraints and product specifications. A case study of the separation of a bagasse hydrolysis solution is used to demonstrate the application of the proposed model. Results show that using both types of nanofiltration membranes allows higher ZnCl2 removal ratios at each membrane unit, hence a decrease in the number of membrane units requ... [more]

We previously developed a conjugate consisting of 10B cluster BSH and tri-arginine peptide (BSH-3R). This could potentially be used as a boron agent for boron neutron capture therapy; however, it possesses poor water solubility and thus needs to be improved for use as medicine. In this study, we devised several means of improving the water solubility of BSH-3R. As one of them, we used cyclodextrin (CD), which was expected to improve the water solubility resulting from interaction of the BSH-3R with CD. We evaluated the solubility of BSH-3R in aqueous CD solution by using reverse-phase high-performance liquid chromatography. As we expected, the solubility of BSH-3R was increased in a manner dependent on the addition of β-CD and γ-CD in aqueous solution. Furthermore, we synthesized BSH conjugated to oligoarginine having various chain lengths (BSH-nR) and BSH-3R with ethylene glycol linkers introduced between BSH and 3R (BSH-nEg-3R). The water solubility of these BSH peptides was also eva... [more]

Partial least squares (PLS) and linear regression methods are widely utilized for quality-related fault detection in industrial processes. Standard PLS decomposes the process variables into principal and residual parts. However, as the principal part still contains many components unrelated to quality, if these components were not removed it could cause many false alarms. Besides, although these components do not affect product quality, they have a great impact on process safety and information about other faults. Removing and discarding these components will lead to a reduction in the detection rate of faults, unrelated to quality. To overcome the drawbacks of Standard PLS, a novel method, MI-PLS (mutual information PLS), is proposed in this paper. The proposed MI-PLS algorithm utilizes mutual information to divide the process variables into selected and residual components, and then uses singular value decomposition (SVD) to further decompose the selected part into quality-related an... [more]

Maize by-product from the bioethanol industry (distiller’s dried grains with solubles, DDGS) is a source of ferulated arabinoxylan (AX), which is a health-promoting polysaccharide. In the present study, AX from DDGS was fermented by a representative colonic bacterial mixture (Bifidobacterium longum, Bifidobacterium adolescentis, and Bacteroides ovatus), and the effect of the fermented AX (AX-f) on the proliferation of the cell line Caco-2 was investigated. AX was efficiently metabolized by these bacteria, as evidenced by a decrease in the polysaccharide molecular weight from 209 kDa to < 50 kDa in AX-f, the release of ferulic acid (FA) from polysaccharide chains (1.14 µg/mg AX-f), and the short-chain fatty acids (SCFA) production (277 µmol/50 mg AX). AX-f inhibited the proliferation of Caco-2 cells by 80−40% using concentrations from 125−1000 µg/mL. This dose-dependent inverse effect was attributed to the increased viscosity of the media due to the polysaccharide concentration. The... [more]

Over the last decades, nanomechanical sensors have received significant attention from the scientific community, as they find plenty of applications in many different research fields, ranging from fundamental physics to clinical diagnosis. Regarding biological applications, nanomechanical sensors have been used for characterizing biological entities, for detecting their presence, and for characterizing the forces and motion associated with fundamental biological processes, among many others. Thanks to the continuous advancement of micro- and nano-fabrication techniques, nanomechanical sensors have rapidly evolved towards more sensitive devices. At the same time, researchers have extensively worked on the development of theoretical models that enable one to access more, and more precise, information about the biological entities and/or biological processes of interest. This paper reviews the main theoretical models applied in this field. We first focus on the static mode, and then conti... [more]

Synthetic fuel production via gasification of residual biomass streams from the pulp and paper industry can be an opportunity for the mills to enable improved resource utilization and at the same time reduce the production of excess heat. This paper summarizes initial oxygen-blown gasification experiments with two bark residues from a European pulp and paper mill, i.e., a softwood bark and a hardwood bark. The gasification process was characterized by measuring syngas yields and process efficiency to find optimum operating conditions. In addition, impurities in the syngas and ash behavior were characterized. Maximum yields of CO and H2 were obtained from softwood bark and amounted to approximately 29 and 15 mol/kg fuel, respectively. Optimum cold gas efficiency was achieved at an oxygen stoichiometric ratio of λ = 0.40 and was approximately 76% and 70% for softwood bark and hardwood bark, respectively. Increased λ had a reducing effect on pollutants in the syngas, e.g., higher hydrocar... [more]

Forty years after the discovery of metallocene catalysts, there are still several aspects that remain unresolved, especially when the “conventional” alkylaluminum activators are not used. Herein, we systematically investigated the synthesis of polyethylene (PE) via three different zirconocene catalysts, with different alkyl substituents, activated via different organoboron compounds. The polymerization behavior, as well as the properties of the materials, were evaluated. The results demonstrate that the highest catalytic activity is shown by bis(cyclopentadienyl)dimethylzirconium activated by trityl tetra(pentafluorophenyl)borate. Additionally, it was found that toluene is the optimum solvent for these systems and at these reaction conditions. Moreover, to validate our experimental results, a comprehensive mathematical model was developed on the basis of thermodynamic and kinetic principles. The concentration of ethylene transferred to the solvent phase (toluene) in a liquid−vapor equi... [more]

Food waste accounts for a substantial portion of the organic waste generated at an increasing rate worldwide. Organic waste, including food waste, is largely subjected to landfill disposal, incineration, and anaerobic digestion; however, more sustainable methods are needed for treating it. Treatment of organic waste using black soldier fly (Hermetia illucens) larvae is an environmentally safe and cost-efficient method that has been attracting increasing attention worldwide. Black soldier fly decomposes various types of organic waste and converts them into high-value biomasses such as oils and proteins. This review introduces the trends in research related to the treatment of organic waste by black soldier fly (Hermetia illucens) larvae (BSFL) and their bioconversion efficiencies in Asian countries. Perspectives on the growth of BSFL during waste treatment operation and optimal rearing conditions are provided. The trends in studies related to the application of BSFL as biofuel and anima... [more]

Low-carbon transition pathways oriented from different transition targets would result in a huge variation of energy system deployment and transition costs. Hydrogen is widely considered as an imperative energy carrier to reach carbon neutral targets. However, hydrogen production, either from non-fossil power or fossil fuels with carbon capture, is closely linked with an energy supply system and has great impacts on its structure. Identifying an economically affordable transition pathway is attractive, and energy infrastructure is critical due to massive investment and long life-span. In this paper, a multi-regional, multi-period, and infrastructure-based model is proposed to quantify energy supply system transition costs with different low-carbon targets and hydrogen production alternatives, and China is taken as a case study. Results show that, fulfilling 2-degree and 1.5-degree temperature increase targets would result in 84% and 151% increases in system transition costs, 114% and 2... [more]

This paper investigates the optimum extraction temperature for enhanced total phenolic yields extracted from avocado fruit flesh (Persea americana) using subcritical water extraction, as well as the impact of fruit ripeness on phenol extraction efficiency. Additionally, extraction yield against extraction time was investigated for time intervals of 10 min over an overall extraction time of 30 min. The subcritical water conditions studied were 18 bar, 87 mL/min, and temperatures of 105 °C, 120 °C, and 140 °C. The total phenolic compounds content was compared for week one avocado flesh and ripe (week four) avocado flesh, with a four-week ripening period between the two samples. The results show that extracting with subcritical water at 105 °C provides the highest phenolic compounds yields of 0.11% and 0.26% by dried mass for week one and ripe fruit (week four), respectively. The experimental results also indicate that the implementation of lower extraction temperatures on week four avoca... [more]

H2 production through dry reforming of methane (DRM) is a hot topic amidst growing environmental and atom-economy concerns. Loading Ni-based reducible mixed oxide systems onto a thermally stable support is a reliable approach for obtaining catalysts of good dispersion and high stability. Herein, NiO was dispersed over MOx-modified-γ-Al2O3 (M = Ti, Mo, Si, or W; x = 2 or 3) through incipient wetness impregnation followed by calcination. The obtained catalyst systems were characterized by infrared, ultraviolet−visible, and X-ray photoelectron spectroscopies, and H2 temperature-programmed reduction. The mentioned synthetic procedure afforded the proper nucleation of different NiO-containing mixed oxides and/or interacting-NiO species. With different modifiers, the interaction of NiO with the γ-Al2O3 support was found to change, the Ni2+ environment was reformed exclusively, and the tendency of NiO species to undergo reduction was modified greatly. Catalyst systems 5Ni3MAl (M = Si, W) comp... [more]

Agriculture has long been considered a great source of nitrogen (N) to surface waters and a major cause of eutrophication. Thus, management practices at the farm-scale have since attempted to mitigate the N losses, although often limited in tile-drained agricultural catchments, which speed up the N transport, while minimizing natural removal in the landscape. In this context, surface-flow constructed wetlands (SFWs) have been particularly implemented as an edge-of-field strategy to intercept tile drains and reduce the N loads by re-establishing ecosystems services of previously drained water ponded areas. These systems collect the incoming water volumes in basins sufficiently large to prolong the hydraulic residence time to a degree where biogeochemical processes between the water, soil, sediments, plants, macro and microorganisms can mediate the removal of N. Despite their documented suitability, great intra and inter-variability in N treatment is still observed to date. Therefore, it... [more]

The aim of this study was to find out what kind of “Bianca” wine could be produced when using organic yeast, what are the dynamics of the resulting alcoholic fermentation, and whether this method is suitable for industrial production as well. Due to the stricter rules and regulations, as well as the limited amount and selection of the permitted chemicals, resistant, also known as interspecific or innovative grape varieties, can be the ideal basic materials of alternative cultivation technologies. Well-designed analytical and organoleptic results have to provide the scientific background of resistant varieties, as these cultivars and their environmentally friendly cultivation techniques could be the raw materials of the future. The role of the yeast in wine production is crucial. We fermented wines from the “Bianca” juice samples three times where model chemical solutions were applied. In our research, we aimed to find out how organic yeast influenced the biogenic amine formation of thr... [more]

This study aimed to assess and compare the quality of groundwater in the city of Al-Marj in Libya with the international standard guidelines for drinking water recommended by the World Health Organisation. An evaluation of the groundwater wells in the study area was conducted. Standard techniques, such as Minitab (v. 16) and ArcGIS (v.10.2), were used for the analytics of the physicochemical and biological parameters of the groundwater samples. An assessment of the calculation of groundwater quality was conducted on the basis of temperature, pH, turbidity, electrical conductivity, total dissolved solids, chloride, sulphate, bicarbonate, total hardness, calcium, potassium, magnesium, ammonia, ammoniacal nitrogen, nitrate, sodium, copper, iron, dissolved oxygen, biochemical oxygen demand, chemical oxygen demand, total suspended solids, Escherichia coli and total coliform bacteria. Results indicated that most groundwater wells in the study area display a higher concentration of several pa... [more]

The Sogunjung decoction (SGJD) is a traditional herbal formula that has been used to treat constipation and improve the constitution of infirm children in Korea. In this study, simultaneous quantification of gallic acid (1), magnoflorine (2), albiflorin (3), paeoniflorin (4), liquiritin apioside (5), liquiritin (6), liquiritigenin (7), coumarin (8), cinnamaldehyde (9), benzoylpaeoniflorin (10), and glycyrrhizin (11) was conducted using fast and sensitive liquid chromatography−tandem mass spectrometry (LC−MS) multiple-reaction monitoring to develop a quality-control protocol for the SGJD. A Waters Acquity UPLC BEH C18 column (2.1 × 100 mm, 1.7 μm) was used for the chromatographic separation of the 11 marker compounds in the SGJD using two mobile phases (5 mM ammonium acetate in distilled water containing 0.1% (v/v) formic acid, and acetonitrile). The MS parameters for a simultaneous analysis were capillary voltage (3.0 kV), source temperature (150 °C), desolvation temperature (500 °C),... [more]