Browse
Records Added in April 2023
Records added in April 2023
Change month: January | February | March | April | May | June | July | August | September | October | November | December
8293. LAPSE:2023.27196
Analysis of the Partial Demagnetization Process of Magnets in a Line Start Permanent Magnet Synchronous Motor
April 4, 2023 (v1)
Subject: Other
Keywords: analysis of coupled phenomena, coupled electromagnetic-thermal phenomena, demagnetization of permanent magnets, finite element analysis, influence of temperature on LSPMSM operation, LSPMSM, partial demagnetization, permanent magnet motors
The paper justifies the validity of analyzing the impact of temperature and the process of partial demagnetization of magnets on the operating parameters of machines. To analyze this impact, a field model of coupled electromagnetic and thermal phenomena in a permanent magnet synchronous motor was proposed. The non-linearity of the magnetic circuit, the effect of temperature on the magnetic, electrical and thermal properties of the materials as well as the developed method of modeling the process of partial demagnetization of the magnet were taken into account. Based on this model, an algorithm and software were developed to analyze the effect of temperature and the process of partial demagnetization of magnets on the work of the line start permanent magnet synchronous motor (LSPMSM). The elaborated software was used to study the effect of temperature during the motor starting phase on the magnetization state of the magnets after the start-up process. The calculation results were compar... [more]
8294. LAPSE:2023.27195
Analytical Study of the Solidification of a Phase Change Material in an Annular Space
April 4, 2023 (v1)
Subject: Materials
Keywords: heat accumulator, heat transfer coefficient on solidification front, overheated liquid, phase change material (PCM), solidification in an annular space
In this study, the process of the solidification of a PCM (phase change material) liquid in an annular space was analytically investigated with the use of a simplified quasi-steady-state model. This model described the phase change phenomenon with the cylindrical solidification front and with the solidification liquid overheated above the solidification temperature. One of the important novelties of the applied model was the determination of the coefficient of the heat transfer between the liquid and the solidified layer on the solidification surface, which was calculated as a function of the location of the solidification front. A method for calculating the variable coefficient of heat transfer on the surface of the solidification front during the solidification process is presented. The contact layer between the cold wall and the solidified layer was incorporated into the model and played an important role. The theoretical analytical method describing the solidification process based... [more]
8295. LAPSE:2023.27194
Active Vehicle Suspension with Anti-Roll System Based on Advanced Sliding Mode Controller
April 4, 2023 (v1)
Subject: Process Control
Keywords: active vehicle suspension, hydraulic actuator, optimal controller, sliding mode controller
In the paper authors consider the active suspension of the wheeled vehicle. The proposed controller consists of a sliding mode controller used to roll reduction and linear regulators with quadratic performance index (LQRs) for struts control was shown. The energy consumption optimization was taken into account at the stage of strut controllers synthesis. The studied system is half of the active vehicle suspension using hydraulic actuators to increase the ride comfort and keeping safety. Instead of installing additional actuators in the form of active anti-roll bars, it has been decided to expand the active suspension control algorithm by adding extra functionality that accounts for the roll. The suggested algorithm synthesis method is based on the object decomposition into two subsystems whose controllers can be synthesized separately. Individual suspension struts are controlled by actuators that use the controllers whose parameters have been calculated with the LQR method. The mathema... [more]
8296. LAPSE:2023.27193
Numerical Simulation of Shearer Operation in a Longwall District
April 4, 2023 (v1)
Subject: Process Control
Keywords: control of shearer operation, methane hazard in longwall, mine ventilation, monitoring system
This paper presents a relatively simple method to analyze potential methane hazard and preventive methods based on a computer simulation of the airflow and methane emission on the longwall face and in the goaf. The presented approach considers the operation of a longwall shearer and conveyers and their possible impacts on both direct emissions of methane and migration from adjacent goafs. In this work, an attempt was made to control the advance speed of the virtual mining system based on sample mining data in the longwall 841A area and the abandoned longwall 841B at the Bielszowice Hard Coal Mine. The objective of this study was to verify the suitability of the adopted control algorithm. The results obtained from computer simulations of the mining operation with the developed control algorithm are presented in graphics of methane concentration, shearer advance speed and the speed control system parameters.
8297. LAPSE:2023.27192
Performance Evaluation of a Novel Thermal Power Plant Process with Low-Temperature Selective Catalytic Reduction
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: flue gas cleaning, low-temperature selective catalyst reduction, process model, thermal power plant
We present the concept of a novel thermal power plant process in conjunction with low-temperature selective catalytic reduction (SCR). This process can be employed to achieve modern standards for NOx emissions and solve problems related to post-gas cleaning processes, such as thermal fatigue, catalyst damage, and an increase in differential pressure in the boiler. Therefore, this study is aimed at evaluating the performance of a novel flue-gas cleaning process for use in a thermal power plant, where a low-temperature SCR is implemented, along with the existing SCR. We developed a process model for a large-scale power plant, in which the thermal power plant was divided into a series of heat exchanger block models. The mass and energy balances were solved by considering the heat transfer interaction between the hot and cold sides to obtain the properties of each material flow. Using the process model, we performed a simulation of the new process. New optimal operating conditions were der... [more]
8298. LAPSE:2023.27191
Three-Dimensional Modeling and Fluid Flow Simulation for the Quantitative Description of Permeability Anisotropy in Tidal Flat Carbonate
April 4, 2023 (v1)
Subject: Modelling and Simulations
Keywords: future drilling, outcrop reservoir analog, reservoir performance, reservoir quality prediction, tidal flat
Three-dimensional (3D) facies and petrophysical models were generated from previously published data of carbonate strata in the Dam Formation (eastern Saudi Arabia) to quantitatively investigate, describe, understand, model, and predict the permeability anisotropy in tidal flat carbonate on the basis of a sequence stratigraphic framework. The resulting 3D models were used to conduct fluid flow simulations to demonstrate how permeability anisotropy influences the production of hydrocarbons and ultimately affects decisions concerning future drilling in the exploration and development of carbonate reservoirs with tidal flat strata. The constructed 3D facies model consists of four lithofacies associations, two of which are grain-dominated associations and two of which are mud-dominated associations. These lithofacies associations vary spatially in four reservoir zones (zones 1 to 4), which represent two fourth-order sequences in the uppermost part of the Dam Formation. Zones 1 and 3 consis... [more]
8299. LAPSE:2023.27190
Resonant Network Design Method to Reduce Influence of Mutual Inductance between Receivers in Multi-Output Omnidirectional Wireless Power Transfer Systems
April 4, 2023 (v1)
Subject: Other
Keywords: multi–output, mutual inductance, omnidirectional WPT system, resonant network, wireless power transfer (WPT) system
Many studies have been conducted on multi-output systems that transfer power to multiple receivers in conventional planar-type wireless power transfer (WPT) systems; however, few studies and analyses have taken into account the mutual inductance between receivers in multi-output omnidirectional WPT systems. In this paper, the correlation between the mutual inductance between receivers and the power transfer efficiency (PTE) in a multi-output omnidirectional WPT system is analyzed, and a limitation in terms of a reduction in the PTE with an increase in the influence of the mutual inductance between the receivers is presented. To solve this problem, a resonant network design method is proposed to reduce the influence of mutual inductance between receivers, and appropriate canceling capacitor values are selected using the weighted sum method among multi-objective optimization methods. The proposed method is through simulations and experiments, and it presents the potential for improvement... [more]
8300. LAPSE:2023.27189
Role of Microbial Hydrolysis in Anaerobic Digestion
April 4, 2023 (v1)
Subject: Biosystems
Keywords: anaerobic digestion, biodegradable waste, biogas, biological pretreatment, biomass pretreatment, biorefinery, hydrolysis stage, multi-stage digestion
There is a growing need of substrate flexibility for biobased production of energy and value-added products that allows the application of variable biodegradable residues within a circular economy. It can be used to balance fluctuating energy provision of other renewable sources. Hydrolysis presents one of the biggest limitations during anaerobic digestion. Methods to improve it will result in broader process applicability and improved integration into regional material cycles. Recently, one focus of anaerobic digestion research has been directed to systems with a separate hydrolysis−acidogenesis stage as it might be promised to improve process performance. Conditions can be adjusted to each class of microorganisms individually without harming methanogenic microorganisms. Extensive research of separate biomass pretreatment via biological, chemical, physical or mixed methods has been conducted. Nevertheless, several methods lack economic efficiency, have a high environmental impact or f... [more]
8301. LAPSE:2023.27188
Study on the Hybrid Cooling of the Flame Tube in a Small Triple-Swirler Combustor
April 4, 2023 (v1)
Subject: Process Control
Keywords: experimental investigation, impingement-film cooling, inclined multi-hole, triple-swirler combustor, wall temperature
An experimental and numerical investigation is conducted to study the influence of different cooling schemes on the wall temperature of the flame tube in a small triple-swirler combustor in this paper. Two different cooling structures are adopted: the impingement-film and inclined multi-hole cooling structure (Scheme B, C), and the inclined multi-hole control group (Scheme A). The impact of parameters including inlet temperature (373−423 K), inlet Mach number (Ma) (0.12−0.18), and fuel−air ratio (FAR) (0.02−0.03) are discussed. The results show that the wall temperature of the flame tube rises with the increase in inlet temperature; as the inlet Mach number increases, the wall temperature (Scheme B, C) of the primary zone goes up and is distributed more uniformly; as FAR rises, the wall temperature in Scheme C is nearly unchanged, while it is increased in Scheme A and B. For the range of parameters considered in this study, the lowest wall temperature and the best cooling effect are ob... [more]
8302. LAPSE:2023.27187
Application of Industry 4.0 to the Product Development Process in Project-Type Production
April 4, 2023 (v1)
Subject: Food & Agricultural Processes
Keywords: case study, energy savings, Industry 4.0, product development process, project-type production
Currently, the concept of Industry 4.0 (I4.0) is reaching most companies by changing the characteristics of their production systems. The aim of this study was to determine the possibilities of applying I4.0 concepts and tools to the product development process in a small- to medium-sized enterprise (SME)—a food processing technology supplier that offers individually tailored solutions. The study employs the case study methodology along with conceptual studies. Based on the available I4.0 concepts/technologies, the areas of the process that could be improved were identified. The study concludes with proposing several modifications in the process in the context of I4.0. Some of the process stages can be shortened by implementing I4.0 tools. It was found that the length of the process can be shortened from 36 to 26 months, and possible gains also include energy savings. Technological tools, referred to as augmented/virtual reality, along with simulations and virtual manufacturing, seem t... [more]
8303. LAPSE:2023.27186
Experimental Study on a Hydrogen Stratification Induced by PARs Installed in a Containment
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: hydrogen mitigation, hydrogen stratification, nuclear power plant, passive auto-catalytic recombiner, severe accident
Hydrogen can be produced in undesired ways such as a high temperature metal oxidation during an accident. In this case, the hydrogen must be carefully managed. A hydrogen mitigation system (HMS) should be installed to protect a containment of a nuclear power plant (NPP) from hazards of hydrogen produced by an oxidation of the fuel cladding during a severe accident in an NPP. Among hydrogen removal devices, passive auto-catalytic recombiners (PARs) are currently applied to many NPPs because of passive characteristics, such as not requiring a power supply nor an operators’ manipulations. However, they offer several disadvantages, resulting in issues related to hydrogen control by PARs. One of the issues is a hydrogen stratification in which hydrogen is not well-mixed in a compartment due to the high temperature exhaust gas of PARs and accumulation in the lower part. Therefore, experimental simulation on hydrogen stratification phenomenon by PARs is required. When the hydrogen stratificat... [more]
8304. LAPSE:2023.27185
Where Renewable Energy Sources Funds are Invested? Spatial Analysis of Energy Production Potential and Public Support
April 4, 2023 (v1)
Subject: Energy Policy
Keywords: energy transformation, European funds, policy effectiveness, regional policy, renewable energy potential, Structural Funds
Energy transition in the European Union (EU) is strongly related to public support from structural funds which enable member states to create new and renovate existing renewable energy source (RES) installations. However, in order to maximize benefits of these investments it is crucial to consider where RES funds are allocated, how it corresponds with RES potential in specific locations, and how future implementation of energy policies can be improved. In this study, RES development projects supported by EU funds, implemented in the period 2004−2019 in Poland, were analyzed in relation to solar, wind and biomass energy potential. The study was conducted with the use of agglomeration method and k-mean method to define clusters of local administrative units characterized by similar features of RES funds absorption and renewable energy production potential. The results obtained show that in the case of all energy sources there is no correlation between high RES funds absorption and energy... [more]
8305. LAPSE:2023.27184
Techno-Economic Optimization Analysis of an Autonomous Photovoltaic Power System for a Shoreline Electrode Station of HVDC Link: Case Study of an Electrode Station on the Small Island of Stachtoroi for the Attica−Crete Interconnection
April 4, 2023 (v1)
Subject: Process Design
Keywords: autonomous power system, battery, electrode station, HVDC link, photovoltaic panels
A lot of autonomous power systems have been designed and operated with different power levels and with special requirements for climatic conditions, availability, operation/maintenance cost, fuel consumption, environmental impacts, etc. In this paper a novel design of an autonomous power system with photovoltaic panels and electrochemical batteries for a shoreline electrode station is analyzed. This station will be constructed on the small island of Stachtoroi for the new high voltage direct current (HVDC) link of Attica−Crete in Greece. The general guidelines of the International Council on Large Electric Systems (CIGRE) and of the International Electrotechnical Committee (IEC) for the power system of lighting and auxiliary loads for these HVDC stations are supplied from the medium voltage or the low voltage distribution network, whereas they do not take into account the criticality of this interconnection, which will practically be the unique power facility of Crete island. The signi... [more]
8306. LAPSE:2023.27183
“Oil is the New Data”: Energy Technology Innovation in Digital Oil Fields
April 4, 2023 (v1)
Subject: Energy Policy
Keywords: digital oil field, energy policy, oil exploration and production, oil upstream, technology innovation
Digital oil fields (DOFs) are built on data produced from energy technology innovation during the application of new technologies to oil resource development. In this study, this conversion is examined through the paradigm switch to “oil is the new data”. An analysis of related patents shows that DOF technology is developing through convergence and close links with other industries, specifically the equipment, parts, and material industries. Additionally, it is conjectured that the strategic preemption of standards will emerge as an important policy issue because a standard must be established for the interoperability of the elemental technologies of DOFs. Furthermore, with the expansion of DOF-related technologies, device-related technologies have also been developed. Of these device-related technologies, sensor technology specifically provides new possibilities for the development of DOFs. The significance of this study is that it explains the evolution of DOFs over the course of 10... [more]
8307. LAPSE:2023.27182
An Overview of MnAl Permanent Magnets with a Study on Their Potential in Electrical Machines
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: COMSOL, electrical machines, permanent magnets, rare earth-free, Renewable and Sustainable Energy
In this paper, hard magnetic materials for future use in electrical machines are discussed. Commercialized permanent magnets used today are presented and new magnets are reviewed shortly. Specifically, the magnetic MnAl compound is investigated as a potential material for future generator designs. Experimental results of synthesized MnAl, carbon-doped MnAl and calculated values for MnAl are compared regarding their energy products. The results show that the experimental energy products are far from the theoretically calculated values with ideal conditions due to microstructure-related reasons. The performance of MnAl in a future permanent magnet (PM) generator is investigated with COMSOL, assuming ideal conditions. Simplifications, such as using an ideal hysteresis loop based on measured and calculated saturation magnetization values were done for the COMSOL simulation. The results are compared to those for a ferrite magnet and an NdFeB magnet. For an ideal MnAl hysteresis loop, it wou... [more]
8308. LAPSE:2023.27181
Individual Cylinder Combustion Optimization to Improve Performance and Fuel Consumption of a Small Turbocharged SI Engine
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: 0D-1D engine modeling, combustion optimization, cycle-to-cycle variation, cylinder-to-cylinder variation, experiments, fuel consumption
Stringent exhaust emission and fuel consumption regulations impose the need for new solutions for further development of internal combustion engines. With this in mind, a refined control of the combustion process in each cylinder can represent a useful and affordable way to limit cycle-to-cycle and cylinder-to-cylinder variation reducing CO2 emission. In this paper, a twin-cylinder turbocharged Port Fuel Injection−Spark Ignition engine is experimentally and numerically characterized under different operating conditions in order to investigate the influence of cycle-to-cycle variation and cylinder-to-cylinder variability on the combustion and performance. Significant differences in the combustion behavior between cylinders were found, mainly due to a non-uniform effective in-cylinder air/fuel (A/F) ratio. For each cylinder, the coefficients of variation (CoVs) of selected combustion parameters are used to quantify the cyclic dispersion. Experimental-derived CoV correlations representati... [more]
8309. LAPSE:2023.27180
An Overview of Applications of the Modular Multilevel Matrix Converter
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: AC-to-AC conversion, modular multilevel converters, modular multilevel matrix converters
The modular multilevel matrix converter is a relatively new power converter topology suitable for high-power alternating current (AC)-to-AC applications. Several publications in the literature have highlighted the converter capabilities, such as full modularity, fault-redundancy, control flexibility and input/output power quality. However, the topology and control of this converter are relatively complex to realise, considering that the converter has a large number of power-cells and floating capacitors. To the best of the authors’ knowledge, there are no review papers where the applications of the modular multilevel matrix converter are discussed. Hence, this paper aims to provide a comprehensive review of the state-of-the-art of the modular multilevel matrix converter, focusing on implementation issues and applications. Guidelines to dimensioning the key components of this converter are described and compared to other modular multilevel topologies, highlighting the versatility and co... [more]
8310. LAPSE:2023.27179
Feasibility of a 100% Global Renewable Energy System
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: climate change, EROEI, future, pandemic, Renewable and Sustainable Energy, solar energy, wind energy
Controversy exists as to whether renewable energy (RE) can provide for all the world’s energy needs. The purpose of this paper is to help resolve this vital question. Official forecasts see a resumption of a business-as-usual world after the pandemic-induced recession, with further economic growth out to at least 2050. The novel approach taken in this paper is to assume that such a world is fueled entirely with RE at global energy levels at or above those of today, and then to examine whether this scenario is feasible. Because the intermittent primary electricity sources, wind, and solar power, would have to supply nearly all this energy, a simplification made for this analysis is that they do supply 100% of all energy, including non-electrical energy needs. It is found that the energy that could be delivered by these two sources is much less than often assumed, for several reasons: The declining quality of inputs; the need for inclusion of uncounted environmental costs; the need for e... [more]
8311. LAPSE:2023.27178
Corrosion Behavior of Al in Ethanol−Gasoline Blends
April 4, 2023 (v1)
Subject: Process Control
Keywords: Al, corrosion behavior, ethanol–gasoline blends
The corrosion behavior of pure aluminum (Al) in 20 v/v% ethanol−gasoline blends has been studied using electrochemical techniques. Ethanol was obtained from different fruits including sugar cane, oranges, apples, or mangos, whereas other techniques included lineal polarization resistance, electrochemical noise, and electrochemical impedance spectroscopy for 90 days. Results have shown that corrosion rates for Al in all the blends were higher than that obtained in gasoline. In addition, the highest corrosion rate was obtained in the blend containing ethanol obtained from sugar cane. The corrosion process was under charge transfer control in all blends; however, for some exposure times, it was under the adsorption/desorption control of an intermediate compound. Al was susceptible to a localized, plotting type of corrosion in all blends, but they were bigger in size and in number in the blend containing ethanol obtained from sugar cane.
8312. LAPSE:2023.27177
From Economic to Extrinsic Values of Sustainable Energy: Prestige, Neo-Rentierism, and Geopolitics of the Energy Transition in the Arabian Peninsula
April 4, 2023 (v1)
Subject: Energy Policy
Keywords: energy transition, geopolitics, Gulf Cooperation Council (GCC), nuclear power, political economy, Renewable and Sustainable Energy
Energy transition in the region of the Gulf Cooperation Countries (GCC) has recently commenced and is now being implemented through large-scale renewable projects, nuclear plants, and energy efficiency measures in the built environment. This paper highlights how alternative energies are associated with non-economic factors such as prestige, modernity, and (soft or symbolic) power. It analyzes the specific ways of delivering energy diversification in the Gulf through renewable megaprojects, the reorganization of the energy sector, and the incorporation of nuclear energy as an add-on source. These decisions serve GCC states in showcasing modernity, maintaining centralized control, posturing geopolitically, and extending the rent distribution mechanisms. On one hand, the energy transition in the Gulf has been domesticated through policies and strategies suiting the political systems in the region. This can have an acceleration effect on this transition. On the other hand, the implications... [more]
8313. LAPSE:2023.27176
Performance of Thermoelectric Power-Generation System for Sufficient Recovery and Reuse of Heat Accumulated at Cold Side of TEG with Water-Cooling Energy Exchange Circuit
April 4, 2023 (v1)
Subject: Process Control
Keywords: Energy Conversion, heat recovery, thermoelectric, water-cooling
Aiming to reduce thermal energy loss at the cold side of a thermoelectric generator (TEG) module during thermoelectric conversion, a thermoelectric energy conversion system for heat recovery with a water-cooling energy exchange circuit was devised. The water-cooling energy exchange circuit realized sufficient recovery and reuse of heat accumulated at the cold side of the TEG, reduced the danger of heat accumulation, improved the stability and output capacity of thermoelectric conversion, and provided a low-cost and high-yield energy conversion strategy in energy conversion and utilization. Through the control variable method to adjust the heat generation of the heat source in the thermoelectric conversion, critical parameters (e.g., inner resistance of the TEG, temperatures of thermoelectric modules, temperature differences, output current, voltage, power, and efficiency of thermoelectric conversion) were analyzed and discussed. After using the control variable method to change the rat... [more]
8314. LAPSE:2023.27175
Analysis on Double Quench and Instantaneous Power of SFCL Using Two Magnetically Coupled Windings According to Winding Direction
April 4, 2023 (v1)
Subject: Process Design
Keywords: double quench, fault current limiting characteristics, instantaneous power, superconducting fault current limiter (SFCL), two magnetically coupled windings, winding direction
In this study, the characteristics of the double quench and instantaneous power of a superconducting fault current limiter (SFCL) using two magnetically coupled windings were analyzed. In the proposed model of SFCL, two magnetically coupled windings are wound on the iron core and each winding is connected to one superconducting element. When a fault occurs, the SFCL can limit the fault current by the double quench occurrence of two superconducting elements. In order to analyze the influence of the winding direction on the fault current limiting characteristics of the proposed SFCL, two magnetically coupled windings were designed to allow the same and the reverse directions. From the simulated short circuit experiment, the currents and the voltages of two coupled windings and two superconducting elements were measured and the instantaneous power and the double quench occurrence were analyzed. It was confirmed from the experimental results analysis that the fault current limiting charact... [more]
8315. LAPSE:2023.27174
Comparison of Performance-Assessment Methods for Residential PV Battery Systems
April 4, 2023 (v1)
Subject: Energy Systems
Keywords: inverter efficiency, key performance indicators, laboratory test procedures, performance assessment, photovoltaic systems, PV battery systems, residential battery systems, residential power supply, test profiles
Declining costs for high-performance batteries are leading to a global increased use of storage systems in residential buildings. Especially in conjunction with reduced photovoltaic (PV) feed-in tariffs, a large market has been developed for PV battery systems to increase self-sufficiency. They differ in the type of coupling between PV and battery, the nominal capacities of their components, and their degree of integration. High system performance is particularly important to achieve profitability for the operator. This paper presents and evaluates methods for a uniform determination of PV battery system performance. Already the requirement analysis reveals that a performance comparison of PV battery systems must cover the efficiency and effectiveness during system operation. A method based on a derivation of key performance indicators (KPIs) for these two criteria through an application test is proposed. It is evaluated by comparison to other methods, such as the System Performance In... [more]
8316. LAPSE:2023.27173
Office Building Tenants’ Electricity Use Model for Building Performance Simulations
April 4, 2023 (v1)
Subject: Numerical Methods and Statistics
Keywords: analytical modelling, building simulation, energy modelling, energy performance, HVAC, office buildings, statistical analysis
Large office buildings are responsible for a substantial portion of energy consumption in urban districts. However, thorough assessments regarding the Nordic countries are still lacking. In this paper we analyse the largest dataset to date for a Nordic office building, by considering a case study located in Stockholm, Sweden, that is occupied by nearly a thousand employees. Distinguishing the lighting and occupants’ appliances energy use from heating and cooling, we can estimate the impact of occupancy without any schedule data. A standard frequentist analysis is compared with Bayesian inference, and the according regression formulas are listed in tables that are easy to implement into building performance simulations (BPS). Monthly as well as seasonal correlations are addressed, showing the critical importance of occupancy. A simple method, grounded on the power drain measurements aimed at generating boundary conditions for the BPS, is also introduced; it shows how, for this type of d... [more]
8317. LAPSE:2023.27172
Particle Swarm Optimization-Based Secure Computation Efficiency Maximization in a Power Beacon-Assisted Wireless-Powered Mobile Edge Computing NOMA System
April 4, 2023 (v1)
Subject: Other
Keywords: energy harvesting (EH), mobile edge computing (MEC), non-orthogonal multiple access (NOMA), particle swarm optimization (PSO), secure computation efficiency (SCE), wireless power transfer (WPT)
In this paper, we aim to provide reliable user connectivity and enhanced security for computation task offloading. Physical layer security is studied in a wireless-powered non-orthogonal multiple access (NOMA) mobile edge computing (MEC) system with a nonlinear energy-harvesting (EH) user and a power beacon (PB) in the presence of an eavesdropper. To further provide a friendly environment resource allocation design, wireless power transfer (WPT) is applied. The secure computation efficiency (SCE) problem is solved by jointly optimizing the transmission power, the time allocations for energy transfer, the computation time, and the central processing unit (CPU) frequency in the NOMA-enabled MEC system. The problem is non-convex and challenging to solve because of the complexity of the objective function in meeting constraints that ensure the required quality of service, such as the minimum value of computed bits, limitations on total energy consumed by users, maximum CPU frequency, and m... [more]
[0.09 s]

