The research work leading to this paper [...]

This study examines whether oil and gas risk factors are priced in the returns of Malaysian oil and gas stocks employing asset pricing model with improved version of Fama-MacBeth two-stage panel regression. The findings reveal that oil price risk, gas price risk, and exchange rate risk are priced factors in the returns of oil and gas stocks, alongside market-based risk factors. Oil price, gas price and exchange rate factors are found to be associated with positive risk premium implying that they are systematic risk factors in the Malaysian oil and gas industry. Investors demand compensation for exposure to changes in oil price, gas price and exchange rate, implying that the risk cannot be eliminated through diversification. The risk premium for common systematic risk factors such as market, book-to-market, and momentum factors are found to be negative. The results suggest that in the Malaysian oil and gas industry, momentum driven strategy produces negative returns and investors receiv... [more]

The aim of this study was to analyse the effect of different nitrogen increase rates in feedstock on the process stability and conversion efficiency in anaerobic digestion (AD). The research was conducted in continuously stirred tank reactors (CSTR), initially filled with two different inocula: inocula #1 with low and #2 with high nitrogen (N) concentrations. Three N feeding regimes were investigated: the “0-increase” feeding regime with a constant N amount in feeding and the regimes “0.25-increase” and “0.5-increase” where the N concentrations in feedstock were raised by 0.25 and 0.5 g·kg−1, respectively, related to fresh matter (FM) every second week. The N concentration inside the reactors increased according to the feeding regimes. The levels of inhibition (Inhibition) in specific methane yields (SMY), related to the conversion efficiency of the substrates, were quantified. At the N concentration in digestate of 10.82 ± 0.52 g·kg−1 FM measured in the reactors with inoculum #2 and “... [more]

Electricity consumption patterns reveal energy demand behaviors and enable strategY implementation to increase efficiency using monitoring systems. However, incorrect patterns can be obtained when the time-series components of electricity demand are not considered. Hence, this research proposes a new method for handling time-series components that significantly improves the ability to obtain patterns and detect anomalies in electrical consumption profiles. Patterns are found using the proposed method and two widespread methods for handling the time-series components, in order to compare the results. Through this study, the conditions that electricity demand data must meet for making the time-series analysis useful are established. Finally, one year of real electricity consumption is analyzed for two different cases to evaluate the effect of time-series treatment in the detection of anomalies. The proposed method differentiates between periods of high or low energy demand, identifying c... [more]

Renewable energy has become very popular in recent years. The amount of renewable generation has increased in both grid-connected and stand-alone systems. This is because it can provide clean energy in a cost-effective and environmentally friendly fashion. Among all varieties, photovoltaic (PV) is the ultimate rising star. Integration of other technologies with solar is enhancing the efficiency and reliability of the system. In this paper a fuel cell−solar photovoltaic (FC-PV)-based hybrid energy system has been proposed to meet the electrical load demand of a small community center in India. The system is developed with PV panels, fuel cell, an electrolyzer and hydrogen storage tank. Detailed mathematical modeling of this system as well as its operation algorithm have been presented. Furthermore, cost optimization has been performed to determine ratings of PV and Hydrogen system components. The objective is to minimize the levelized cost of electricity (LCOE) of this standalone system... [more]

The paper analyzes the utilization of cable screen currents for earth fault identification and location. Attention is paid on cable and mixed feeders—cable and overhead lines. The principle of operation is based on utilization of 3 criterion values: Ratio of cable screen earthing current and zero sequence cable core current—RF110/15, phase shift between cable screen earthing current and zero sequence cable core current—α and cable screen admittance defined as a ratio of cable screen earthing current and zero sequence voltage—Y0cs. Earth fault location is possible thanks to discovered relation between RF110/15 and α, whereas Y0cs allows for reliable detection of earth faults. Detection and identification are very important because it allows to increase the reliability of supply—reduce downtime and number of consumers affected by the fault. The article presents a phase to ground fault current flow for different power system configurations. At the end solution, which improves location cap... [more]

This paper proposes a fault location method for power distribution networks using phasor measurement units (PMU) and short circuit analysis. In order to improve the problems of the existing studies, we focused on several approaches as follows. First, in order to minimize the number of PMU installations, a fault location estimation of lateral feeders through short circuit analysis was presented. Second, unbalanced faults and impacts of photovoltaic (PV) were considered. The proposed method consists of two stages. In Stage 1, the fault location was estimated for the main feeder using PMU installed at the start and end points of the main feeder. Symmetrical components of voltage and current variation were calculated by considering the impact of PVs interconnected to the lateral feeders. If the result of Stage 1 indicated a connection section of lateral feeder on the main feeder, Stage 2 would be performed. In Stage 2, the fault location was estimated for the lateral feeder by comparing th... [more]

Extensive numerical analysis was performed for the unsteady state, natural convection in the annular cylinders. The cylinder’s boundaries were thermally insulated, except the inner surface. The fluid (water) in the cylinder initially was assumed at a cold temperature while the inner surface was subjected to a high temperature. The time history for the heat transfer by diffusion and advection was studied. The time needed for fully charging the storage tank and rate of heat transfer was calculated. The predicted results were compared with the pure heat diffusion process and with a steady-state convection system. Therefore, CFD simulations were performed for natural convection in the storage tank. The main objective of this study was to establish correlations for the rate of heat transfer as a function of time and other controlling parameters. The correlation is needed in designing a thermal energy storage system for domestic and industrial heating processes. One of the drawbacks of the c... [more]

Farming systems need to be planned to provide suitable levels of economic profitability and, at the same time, ensure an effective energy use, in order to perform environmentally friendly production strategies. The herein present work aims to assess the efficiency of energy use and economic impacts of the main farming methods (conventional, organic and integrated) of Clementine’s crops in Calabria (South Italy), through a combined use of Life Cycle Energy Assessment (LCEA) approach and economic analysis. For this purpose, data were collected from clementine producers by using face-to-face interviews. The results revealed that average energy consumption in the organic farming systems was 72,739 MJ, lower than conventional and integrated systems equal to 95,848 MJ and 94,060 MJ, respectively. This is mainly due to the ban of chemicals. Economic analysis showed that organic farms were more profitable compared with the other farming methods, because of the greater selling price and the EU... [more]

The paper presents the results of a study on chemical composition of ashes from three types of waste biomass in terms of fertilizer usefulness. Waste from the process of corn grain drying, including corn cobs, corn grains and corn husk and their mixtures in the ratio 4:1 (v/v) were examined. The study proved that corn grain was the material with the highest concentration of macroelements among those studied (P—21,452 ppm, K—25,970 ppm, S—5911 ppm) and the mixture of corn cobs with corn grains (Ca—81,521 ppm). When microelements were considered, the highest concentration was recorded for corn cobs (Cu—207 ppm, Mn—844 ppm, Zn—857 ppm) and corn husk (Fe—15,100 ppm). The analysis of toxic elements in the ashes of the biomass studied showed their highest concentration in corn husk ash (Ni—494 ppm, Cr—301 ppm, Pb—42.7 ppm, As—4.62 ppm). The analysis showed that regardless of the type of biomass studied, all ashes were strongly enriched (in relation to the average soil content) with phosphoru... [more]

Higher-voltage-standard and higher-power-rating aerospace power systems are being investigated intensively in the aerospace industry to address challenges in terms of improving emissions, fuel economy, and also cost. Multilevel converter topologies become attractive because of their higher efficiency under high-voltage and high-switching-frequency conditions. In this paper, an asymmetrical-voltage-level back-to-back multilevel converter is proposed, which consists of a five-level (5L) rectifier stage and a three-level (3L) inverter stage. Based on the comparison, such an asymmetrical back-to-back structure can achieve high efficiency and minimize the converter weight on both rectifier and inverter sides. A compact triple-surface-mounted heatsink structure is designed to realize high density and manufacturable thermal management. This topology and structure are evaluated with a full-rating prototype. According to the evaluation, the achieved power density is 2.61 kVA/kg, which is 30% hi... [more]

The global consumption of dairy produce is forecasted to increase by 19% per person by 2050. However, milk production is an intense energy consuming process. Coupled with concerns related to global greenhouse gas emissions from agriculture, increasing the production of milk must be met with the sustainable use of energy resources, to ensure the future monetary and environmental sustainability of the dairy industry. This body of work focused on summarizing and reviewing dairy energy research from the monitoring, prediction modelling and analyses point of view. Total primary energy consumption values in literature ranged from 2.7 MJ kg−1 Energy Corrected Milk on organic dairy farming systems to 4.2 MJ kg−1 Energy Corrected Milk on conventional dairy farming systems. Variances in total primary energy requirements were further assessed according to whether confinement or pasture-based systems were employed. Overall, a 35% energy reduction was seen across literature due to employing a pastu... [more]

This study proposes a fuzzy self-organized neural networks (SOM) model for detecting fraud by domestic customers, the major cause of non-technical losses in power distribution networks. Using a bottom-up approach, normal behavior patterns of household loads with and without photovoltaic (PV) sources are determined as normal behavior. Customers suspected of energy theft are distinguished by calculating the anomaly index of each subscriber. The bottom-up method used is validated using measurement data of a real network. The performance of the algorithm in detecting fraud in old electromagnetic meters is evaluated and verified. Types of energy theft methods are introduced in smart meters. The proposed algorithm is tested and evaluated to detect fraud in smart meters also.

Calcium (Ca)-bearing minerals are of interest for the design of electrode materials required for rechargeable Ca-ion batteries. Here we use classical simulations to examine defect, dopant and transport properties of CaFeSi2O6. The formation of Ca-iron (Fe) anti-site defects is found to be the lowest energy process (0.42 eV/defect). The Oxygen and Calcium Frenkel energies are 2.87 eV/defect and 4.96 eV/defect respectively suggesting that these defects are not significant especially the Ca Frenkel. Reaction energy for the loss of CaO via CaO Schottky is 2.97 eV/defect suggesting that this process requires moderate temperature. Calculated activation energy of Ca-ion migration in this material is high (>4 eV), inferring very slow ionic conductivity. However, we suggest a strategy to introduce additional Ca2+ ions in the lattice by doping trivalent dopants on the Si site in order to enhance the capacity and ion diffusion and it is calculated that Al3+ is the favourable dopant for this proce... [more]

Neighboring stand-alone hybrid microgrids with diesel generators (DGs) as well as grid-feeding photovoltaics (PV) and grid-forming battery storage systems (BSS) can be coupled to reduce fuel costs and emissions as well as to enhance the security of supply. In contrast to the research in control and small-signal rotor angle stability of microgrids, there is a significant lack of knowledge regarding the transient stability of off-grid hybrid microgrids in a cluster environment. Therefore, the large-signal rotor angle stability of pooled microgrids was assessed qualitatively and also quantitatively in this research work. Quantitative transient stability assessment (TSA) was carried out with the help of the—recently developed and validated—micro-hybrid method by combining time-domain simulations and transient energy function analyses. For this purpose, three realistic dynamic microgrids were modelled regarding three operating modes (island, interconnection, and cluster) as well as the conv... [more]

This work is dedicated to the high temperature pyrolysis of municipal plastic waste using Me/Ni/ZSM-5 catalysts. Catalysts were synthetized by wet impregnation. In addition to nickel, synthetic zeolite catalysts contain calcium, ceria, lanthanum, magnesia or manganese. Catalysts were prepared and tested using 0.1, 0.5 and 2.0 Me/Ni ratios. Catalyst morphology was investigated by SEM and surface analysis. Higher concentrations of second metals can block catalyst pore channels due to the more coke formation, which leads to smaller surface area. Furthermore, the chemicals used for the impregnation were among the catalyst grains, especially in case of 2.0 Me/Ni ratios. For pyrolysis, a horizontal tubular furnace reactor was used at 700 °C. The highest hydrogen and syngas yields were observed using ceria- and lanthanum-covered catalysts. The maximum production of syngas and hydrogen (69.8 and 49.2 mmol/g raw material) was found in the presence of Ce/Ni/ZSM-5 catalyst with a 0.5 Me/Ni ratio.

Locating and planning charging stations for Low-Emission Vehicles (LEVs) such as Battery Electric Vehicle (BEV), Hydrogen Fuel-Cell Vehicle (HFCV), and Natural Gas Vehicle (NGV) are becoming increasingly important for LEV users, government, and the automobile industry. Conventional planning approach of charging station usually plans single functional charging station that can only serve one kind of LEVs, and other factors such as fuel type, driving range, initial fuel tank level, and refueling time of the LEV are less considered in the planning stage. In this article, we propose a bi-level planning model to locate and size Multi-Functional Charging Station (MFCS) which can recharge BEV, HFCV, and NGV at the same time in a medium-sized city with different functional areas (e.g., residential area, industrial area, CBD area). We also established a method for generating a daily route considering vehicle attributes and user habits, and we loaded these traveling data into the upper model to... [more]

This paper presents the experimental investigation of a novel cross-compound parabolic concentrator (CCPC). For the first time, a CCPC module was designed to simultaneously work as an electricity generator and collect the thermal energy present in the module which is generated due to the incident irradiation. This CCPC module consists of two regions: an absorber surface atop the rig and a reflective region below that to reflect the irradiation onto the photovoltaic (PV) cell, coupled together to form an absorptive/reflective CCPC (AR-CCPC) module. A major issue in the use of PV cells is the decrease in electrical conversion efficiency with the increase in cell temperature. This module employs an active cooling system to decrease the PV cell temperature, optimizing the electrical performance and absorbing the heat generated within the module. This system was found to have an overall efficiency of 63%, which comprises the summation of the electrical and thermal efficiency posed by the AR... [more]

The turbulent heat transfer enhancement of microfluid as a heat transfer medium in a tube was investigated. Within the Reynolds number ranging from 7000 to 23,000, heat transfer, friction loss and thermal performance characteristics of graphite, Al2O3 and CuO microfluid with the particle volume fraction of 0.25%−1.0% and particle size of 5 μm have been respectively tested. The results showed that the thermal performance of microfluids was better than water. In addition, the graphite microfluid had the best turbulent convective heat transfer effect among several microfluids. To further investigate the effect of graphite particle size on thermal performance, the heat transfer characteristics of the graphite microfluid with the size of 1 μm was also tested. The results showed that the thermal performance of the particle size of 1 μm was better than that of 5 μm. Within the investigated range, the maximum value of the thermal performance of graphite microfluid was found at a 1.0% volume fr... [more]

Operators of commercial anaerobic digestion (AD) plants frequently note the challenge of transferring research results to an industrial setting, especially in matching well-controlled laboratory studies at a constant organic loading rate (OLR) with full-scale digesters subject to day-to-day variation in loadings. This study compared the performance of food waste digesters at fluctuating and constant OLR. In a long-term experiment over nearly three years, variable daily OLR with a range as wide as 0 to 10.0 g VS L−1 day−1 (weekly average 5.0 g VS L−1 day−1) were applied to one laboratory-scale digester, while a pair of control digesters was operated at a constant daily loading of 5.0 g VS L−1 day−1. Different schemes of trace elements (TE) supplementation were also tested to examine how they contributed to process stability. Variable loading had no adverse impact on biogas production or operational stability when 11 TE species were dosed. When TE addition was limited to cobalt and selen... [more]

This study is an elaboration on the conference article written by the same authors, which presented the results of laboratory tests on the biogas efficiency of the following substrates: maize silage (MS), pig manure (PM), potato waste (PW), and sugar beet pulp (SB). This article presents methane yields from the same substrates, but also on a technical scale. Apart from that, it presents an original methodology of defining the Biochemical Methane Potential Correction Coefficient (BMPCC) based on the calculation of biomass conversion on an industrial scale and on a laboratory scale. The BMPCC was introduced as a tool to enable uncomplicated verification of the operation of a biogas plant to increase its efficiency and prevent undesirable losses. The estimated BMPCC values showed that the volume of methane produced in the laboratory was overestimated in comparison to the amount of methane obtained under technical conditions. There were differences observed for each substrate. They ranged... [more]

Oscillating water column wave energy converter arrays can be arranged to enhance the energy production and quality of power delivered to the grid. This study investigates four different array configurations of vented oscillating water columns and their effect on power quality and capacity of the energy storage systems required to absorb power fluctuation. Configuring the array of vented oscillating water columns as a nearshore detached breakwater allows combining the benefits of their complementary features. This increases the economic optimization of wave energy converters, paving the path to the energy market. The operations of the integration schemes are evaluated using the results obtained from simulations carried out using MATLAB/Simulink software. Simulation results show that the array of vented oscillating water columns and array of vented oscillating water columns as nearshore detached breakwater configurations increase the quality of power delivered to the grid and reduce the... [more]

In the next decade, due to the desire for significant reduction in the carbon footprint left by the aviation sector and the development of a sustainable alternatives to petroleum, fuel from renewable sources will play an increasing role as a propellant for turbine aircraft engines. Currently, apart from five types of jet fuel containing synthesized hydrocarbons that are certified by the ASTM D7566 standard, there is yet another synthetic blending component that is at the stage of testing and certification. Hydroprocessed esters and fatty acids enable the production of a synthetic component for jet fuel from any form of native fat or oil. Used feedstock affects the final synthetic blending component composition and consequently the properties of the blend for jet fuel and, as a result, the operation of turbine engines. A specialized laboratory test rig with a miniature turbojet engine was used for research, which is an interesting alternative to complex and expensive tests with full sca... [more]

A novel adaptive high starting torque (HST) scalar control scheme (SCS) for induction motors (IM) is proposed in this paper. It uses a new adaptive-passivity-based controller (APBC) proposed herein for a class of nonlinear systems, with linear explicit parametric dependence and linear stable internal dynamics, which encompasses the IM dynamical model. The main advantage of the HST-SCS includes the ability to move loads with starting-torque over the nominal torque with a simple and cost-effective implementation without needing a rotor speed sensor, variable observers, or parameter estimators. The proposed APBC is based on a direct control scheme using a normalized fixed gain (FG) to fine-tune the adaptive controller parameters. The basic SCS for induction motors (IM) and the HST-SCS were applied to an IM of 200 HP and tested using a real-time simulator controller OPAL-RT showing the achievement of the proposal goal.

Scheduled charging offers the potential for electric vehicles (EVs) to use renewable energy more efficiently, lowering costs and improving the stability of the electricity grid. Many studies related to EV charge scheduling found in the literature assume perfect or highly accurate knowledge of energy demand for EVs expected to arrive after the scheduling is performed. However, in practice, there is always a degree of uncertainty related to future EV charging demands. In this work, a Model Predictive Control (MPC) based smart charging strategy is developed, which takes this uncertainty into account, both in terms of the timing of the EV arrival as well as the magnitude of energy demand. The objective of the strategy is to reduce the peak electricity demand at an EV parking lot with PVarrays. The developed strategy is compared with both conventional EV charging as well as smart charging with an assumption of perfect knowledge of uncertain future events. The comparison reveals that the inc... [more]