Although many factors affect the investment of individual households in renewable energy sources, we highlight one of them: the local spatial development plan. It is one of the planning tools for implementing development policies at the local level. Since it is on the basis of local spatial plans that investments are carried out on the ground, their role in the implementation of renewable energy sources is one of the most important. This article presents the results of a study of local spatial plans in terms of facilitating, on the one hand, and limiting, on the other hand, the implementation of various renewable energy investments. To a large extent, the focus was on examples of planning acts adopted in Polish communes, but they were compared with examples from other European countries. The authors focused on qualitative assessment, taking into account the regulations applicable to all investors, containing generally binding standards, which specify the development’s land use and deta... [more]

A model reference adaptive control and fuzzy neural network (FNN) synchronous motion compensator for a gantry robot is presented in this paper. This paper proposes the development and application of gantry robots with MRAC and FNN online compensators. First, we propose a model reference adaptive controller (MRAC) under the cascade control method to make the reference model close to the real model and reduce tracking errors for the single axis. Then, a fuzzy neural network compensator for the gantry robot is proposed to compensate for the synchronous errors between the dual servo motors to improve precise movement. In addition, an online parameter training method is proposed to adjust the parameters of the FNN. Finally, the experimental results show that the proposed method improves the synchronous errors of the gantry robot and demonstrates the methodology in this paper. This study also successfully integrates the hardware and successfully verifies the proposed methods.

Leading countries are developing clean energy to replace fossil fuels. In this context, Russia is changing its energy policy towards fostering new energy resources, such as hydrogen and helium. Hydrogen will not only contribute to Russia’s financial revenue by replacing natural gas, but will also provide a basis for it to maintain its dominance over the international energy market by pioneering new energy markets. Russia is aiming to produce more than two million tons of hydrogen fuel for export to Europe and Asia by 2035. However, it is facing many challenges, including developing hydrogen fuel storage systems, acquiring the technology required for exporting hydrogen, and building trust in the fuel market. Meanwhile, South Korea has a foundation for developing a hydrogen industry, as it has the highest capacity in the world to produce fuel cells and the ability to manufacture LNG: (liquefied natural gas) carriers. Therefore, South Korea and Russia have sufficient potential to create a... [more]

With the implementation of the carbon neutral policy, the number of electric vehicles (EVs) is increasing. Thus, it is urgently needed to manage the charging and discharging behavior of EVs scientifically. In this paper, EVs are regarded as agents, and a multiagent cooperative optimization scheduling model based on Roth−Erev (RE) algorithm is proposed. The charging and discharging behaviors of EVs will influence each other. The charging and discharging strategy of one EV owner will affect the choice of others. Therefore, the RE algorithm is selected to obtain the optimal charging and discharging strategy of the EV group, with the utility function of the prospect theory proposed to describe EV owners’ different risk preferences. The utility function of the prospect theory has superior effectiveness in describing consumers’ utility. Finally, in the case of residential electricity, the effectiveness of the proposed method is verified. Compared with that of random charging, this method red... [more]

This paper presents a method of inter-turn short-circuit identification in induction motors during load current variations based on a hybrid analytic approach that combines the genetic algorithm and simulated annealing. With this approach, the essence of the method relies on determining the reference matrices and calculating the distance between the reference matric values and the test matrix. As a whole, it is a novel approach to the process of identifying faults in induction motors. Moreover, applying a discrete optimization algorithm to search for alternative solutions makes it possible to obtain the true minimal values of the matrices in the identification process. The effectiveness of the applied method in the monitoring and identification processes of the inter-turn short-circuit in the early stage of its creation was confirmed in tests carried out for several significant state variables describing physical magnitudes of the selected induction motor model. The need for identifica... [more]

Exchangeability means the possibility of the fuel changing, with conservation of the required energy and environmental criteria. The assessment of fuel exchangeability should be realized by a suitable method, which must reliably present the possibility of the exchangeability of fuels, or reject it. In the presented paper, research on the exchangeability of solid fuels in the field of heating production is surveyed by the case study. Based on the available published knowledge from previous studies on fuel exchangeability, the statistical method was chosen for evaluation. The application of this method is useful. For example, by evaluating the exchangeability of natural gas, the manuscript will describe its application for the field of solid fuels in heat production. The research evaluated and analyzed the sample of 12 fuels. For each fuel sample, 35 gas attributes were measured, which were classified into separate flue gas attribute groups: ash content, combustion heat, heating capacity... [more]

The main aim of the paper was to develop an innovative approach to the preliminary estimation possibility of train energy cooperation based on data from timetables, without traction calculations. The article points out the need to strive for sustainable and environmentally friendly transport. It was pointed out that rail transport using electric traction is one of the more ecological branches of transport. It also offers a number of possibilities for improving energy efficiency and reducing energy consumption, one of which is the recovery and reuse of energy lost in the electrodynamic braking process. The main ways in which such energy can be used are listed, but the focus is mainly on the aspect of the so-called “energy cooperation” of trains. Then, the current state of the research and knowledge on the narrowed scope of rail traffic management and recuperative braking in rail transportation is presented; an innovative approach to the indirect optimization of the amount of recuperated... [more]

Poland has great potential for the development of renewable energy sources. The implementation of support systems dedicated to renewable sources has resulted in the installation of over 10,500 MW of installed capacity. At present, with high electricity prices, stimulated by the costs of CO2 emissions and the costs of fuel purchase, renewable energy sources are of particular importance in the transformation of the Polish power industry. The RES auction system and the My Electricity Program contributed to the growth of entrepreneurship and the development of the economy. Energy consumers, from passive ones, have become active market participants—prosumers. The RES auction system alone contributed to the creation of approx. 5 GWp of installed capacity of photovoltaics (PV) sources in 2016−2021, while the My Electricity Program contributed to the creation of approx. 2 GWp of installed capacity in PV installations in 2019−2021. The aim of the study is to compare the economic and social cost... [more]

One of the most effective methods towards improving the environmental safety of combustion engines is the application of specially prepared water-fuel emulsions (WFE). The application of WFE makes it possible to reduce primary sulfur fuel consumption and reveals the possibility of capturing the pollutants from exhaust gases by applying condensing low-temperature heating surfaces (LTHS). In order to realize such a double effect, it is necessary to investigate the pollution processes on condensing LTHS of exhaust gas boilers (EGB), especially the process of low-temperature condensing a sulfuric acid vapor from exhaust gases to investigate the influence of condensing LTHS on the intensity of pollutants captured from the exhaust gases. The aim of this research is to assess the influence of the intensity of pollutants captured from exhaust gases by condensing LTHS in dependence of water content in WFE combustion. Investigations were carried out at a special experimental setup. The processin... [more]

To reach effective monitoring and control, a physical power grid couples with a communication network and evolves into cyber−physical power systems (CPPS), but this cyber−physical interdependence may exacerbate failure on the physical/cyber side and may turn into a cascading failure. Furthermore, distributed generators (DGs) and plug-in hybrid electric vehicles (PHEVs) introduced into CPPS add uncertainties to both the supply side and demand side of power energy. In this paper, we detail the model of CPPS and its coupling mechanism in operation and discuss the propagation mechanism of cascading failure within and across a physical power grid and a communication network. For uncertainties of power energy in the supply and demand sides, the generation and load of each day are divided into 24 time segments for modeling. In the case study, the well-being criteria and reliability indexes are employed to analyze the effect of DGs and cyber−physical interdependence on the reliability of CPPS... [more]

In search of a more sustainable society, humanity has been looking to reduce the environmental impacts caused by its various activities. The energy sector corresponds to one of the most impactful activities since most energies produced come from fossil fuels, such as oil and coal, which are finite resources. Moreover, their inherent processes to convert energy into electricity emit various pollutants, which are responsible for global warming, eutrophication, and acidification of soil and marine environments. Biofuels are one of the alternatives to fossil fuels, and the raw material used for their production includes vegetable oils, wood and agricultural waste, municipal waste, and waste cooking oils (WCOs). The conventional route for WCO valorization is the production of biodiesel, which, as all recovery technologies, presents advantages and disadvantages that must be explored from a technical and economic perspective. Despite its successful use in the production of biodiesel, it shoul... [more]

This article presents the results of the proposed numerical and analytical analysis of the Wireless Power Transfer System (WPT). The system consists of a transmitting surface and a receiving surface, where each of them is composed of planar spiral coils. Two WPT systems were analysed (periodic and aperiodic) considering two types of coils (circular and square). In the aperiodic system, the adjacent coils were wound in the opposite direction. The influence of the type of coils, the winding direction, the number of turns, and the distance between the coils on the efficiency of the WPT system was compared. In periodic models, higher efficiency was obtained with circular rather than square coils. The results obtained with both proposed methods were consistent, which confirmed the correctness of the adopted assumptions. In aperiodic models, for a smaller radius of the coil, the efficiency of the system was higher in the square coil models than in the circular coil models. On the other hand,... [more]

The article aims to assess the effects of soil temperature measured in situ on the heat loss analyses of a building. Numerical analyses and in situ measurements of soil temperature profiles for real conditions under a residential building (profile I) in Poland and under the area outside the building (profile II) were performed. Based on the measurement results, a proprietary geometric model of the partition was proposed. The heat flux and heat flow results obtained for reliable models are 4.9% and 6.9% higher compared to a model based on a typical meteorological year for the wall−foundation system and 10.0% and 10.1% higher for the slab-on-ground structure for profile I. The adoption of temperatures from the area outside the building as the boundary condition (profile II) results in greater differences between the obtained results. The difference in heat flow obtained in the numerical analyses for profiles I and II is about 2 W/m2, both for the wall−foundation system and for the slab-o... [more]

Biomass-based pellet is an important source of renewable energy. In this study, to obtain the high-quality fuel pellet via the densification of pruned branches of fruit trees, we investigated the optimization of blending ratios for different raw materials using branches from jujube (Ziziphus jujuba Mill.), which is a widely distributed waste biomass resource in China. Through the characterization of raw materials and pellets, the effects of different raw materials on the storage, transportation, and combustion performances of the pellets can be understood. The cost evaluation analysis showed that the two optimized, co-densified pellets had great cost advantages compared with the pure jujube branch pellets. This indicates the potential industrial value of optimized pellets. The results of this study can help to improve the application value of orchard residues and generate an additional profit for fruit plantations, simultaneously avoiding the environmental damage caused by its open com... [more]

Electrical power generation by means of electrochemical systems utilizing wastewaters is a global energy challenge tackling technique for which a creation of novel eco-friendly electrode materials is in high relevance. For this purpose a Rhodophyta algae derived activated biochar anode bound with a flaxseeds mucilage binder (5, 10, 20, 30 wt.%) was formed and characterized by thermogravimetric, Brunauer-Emmett-Teller (BET) analysis as well as conductivity and mechanical resistance determination. Activation technique with KOH prior to carbonization at 800 °C of algae was employed to obtain biocarbon with a large surface area. The highest specific surface area of 1298.49 m2/g was obtained with the binder-free sample and had a tendency to decrease with the increase of the binder content. It was estimated that biochar anodes are thermally stable at the temperature of up to 200 °C regardless of binder concentration. The concentration of the binder on the other hand had a significant influen... [more]

Metamaterials are artificially structured composite media with a unique electromagnetic (EM) response that is absent from naturally occurring materials, which appears counterintuitive and aggravates traditional difficulties in perceiving the behavior of EM waves. The aim of this study was to better understand the interaction of EM waves with metamaterials by virtual visualizing the accompanying physical phenomena. Over the years, virtual visualization of EM wave interactions with metamaterials has proven to be a powerful tool for explaining many phenomena that occur in metamaterials. In this study, we performed virtual visualization of the interaction of an EM plane wave with a split-ring resonator (SRR) metamaterial structure, employing CST Studio software for modeling and comprehensive simulations of high-frequency EM fields of 3D objects. The SRR structure was designed to have its magnetic resonance at the frequency f = 23.69 GHz, which is of interest for antennas supporting wireles... [more]

The process of forming an emulsion is an energy-consuming process. The smaller the internal phase droplets we want to produce and the closer the droplets are in size to each other (monodisperse), the more energy we need to put into the system. Generating energy carries a high economic cost, as well as a high environmental footprint. Considering the fact that dispersive systems are widely used in various fields of life, it is necessary to search for other, less-energy-intensive methods that will allow the creation of dispersive systems with adequate performance and minimal energy input. Therefore, an alternative way to obtain emulsions characterized by small droplet sizes was proposed by using an imbibition process in porous materials. By applying this technique, it was possible to obtain average droplet sizes at least half the size of the base emulsion while reducing the polydispersity by about 40%. Oil-in-water emulsions in which vegetable oil or kerosene is the oily phase were tested... [more]

Due to the increasing penetration of renewable energies in lower voltage level, there is a need to develop new control strategies to stabilize the grid voltage. For this, an approach using deep learning to recognize electric loads in voltage profiles is presented. This is based on the idea to classify loads in the local grid environment of an inverter’s grid connection point to provide information for adaptive control strategies. The proposed concept uses power profiles to systematically generate training data. During hyper-parameter optimizations, multi-layer perceptron (MLP) and convolutional neural networks (CNN) are trained, validated, and evaluated to determine the best task configurations. The approach is demonstrated on the example recognition of two electric vehicles. Finally, the influence of the distance in a test grid from the transformer and the active load to the measurement point, respectively, onto the recognition accuracy is investigated. A larger distance between the i... [more]

Currently, ensuring the correct functioning of the electrical grid is an important issue in terms of maintaining the normative voltage parameters and local line overloads. The unpredictability of Renewable Energy Sources (RES), the occurrence of the phenomenon of peak demand, as well as exceeding the voltage level above the nominal values in a smart grid makes it justifiable to conduct further research in this field. The article presents the results of simulation tests and experimental laboratory tests of an electricity management system in order to reduce excessively high grid load or reduce excessively high grid voltage values resulting from increased production of prosumer RES. The research is based on the Elastic Energy Management (EEM) algorithm for smart appliances (SA) using IoT (Internet of Things) technology. The data for the algorithm was obtained from a message broker that implements the Message Queue Telemetry Transport (MQTT) protocol. The complexity of selecting power set... [more]

The overcoming of the issues on energy crisis and inequality have become the priorities as far developing as developed countries are concerned. Moreover, energy inequality has increased due to the shortage of natural gas and rising energy prices in retaliation to the economic recovery affected by the COVID-19 pandemic. This study aims to verify the linkage between the growth of renewable energy consumption and the country’s economic advancement. In this context, this paper determines the main driving forces of renewable energy consumption in European countries during 2000−2018. The annual data for panel regression analysis are retrieved from the OECD. Stat and World Bank Open Data. This empirical analysis employed a set of estimation procedures such as the panel unit root test (Levin, Lin & Chu; Im, Pesaran, Shin W-Stat; ADF-Fisher Chi-square; and PP-Fisher Chi-square methods), the Pearson correlation, fixed- and random-effects models, generalized method of moments (GMM), Hausman and t... [more]

The paper aims to detect the differences in stock market performance between companies from the alternative energy sector and main stock market sectors in the first and second years of the COVID-19 pandemic. We used Global Industry Classification Standard to analyse eleven main stock market sectors and the alternative energy sector. Based on the one-factor variance analysis—ANOVA, we reveal the statistically significant differences between the analysed stock market sectors in both 2020 and 2021. The analysis implied that the performance of stock market companies during COVID-19 is sector-specific. Tukey’s Honestly Significant Difference (HSD) test for pairwise comparison indicates that the alternative energy sector shows the most differentiation. Its average rate of return in 2020 is the highest and is significantly different for all eleven stock market sectors, while the top constituents from the conventional energy and financial sectors suffered the most. In 2021, a reverse trend in... [more]

Ocean wave power generation techniques (converting wave energy into electrical energy) have been in use for many years. The objective of this paper is to review the design, control, efficiency, and safety of ocean wave power generation systems. Several topics are discussed: the current situation of ocean wave power generation system tests in real ocean waves; the optimization design of linear generator for converting ocean wave energy into electrical energy; some optimization control methods to improve the operational efficiency of ocean wave power generation systems; and the current policy and financial support of ocean wave power generation in some countries. Due to the harsh ocean environment, safety is another factor that ocean wave power generation systems will face. Therefore, before the conclusion of this review, a damping coefficient optimization control method based on the domain partition is proposed to improve the efficiency and safety of ocean wave power generation systems.

In the present study, the real-world performance of a ground-to-air heat exchanger (GAHE) was analyzed in the Polish climate which is characterized by warm summers and cold winters. The heat exchanger’s performance was monitored over a period of three years (2017 to 2019), and real-world conditions were compared with a Typical Meteorological Year (TMY). The aim of the study was to assess the exchanger’s energy-efficiency potential in various ventilation scenarios in a single-family home under variable real-world conditions, rather than to simply determine its heating and cooling capacity. The analyzed single-family home was a modern, single-story building with a usable floor area of 115 m2. The building’s thermal insulation and airtightness met stringent energy-efficiency standards. Energy consumption in a building equipped with a natural ventilation system was compared with three other scenarios: ventilation coupled with a GAHE, mechanical ventilation with heat recovery and a high-eff... [more]

Global climate change and air pollution are critical environmental problems in the modern world. Therefore, the reduction of CO2 emissions has long been a crucial challenge for individual countries. In this area, numerous technological, legal, and economic solutions are used. The purpose of this article is to examine the impact of public spending on the level of CO2 emissions in Polish regions. The study uses the logarithmic mean Divisia index (LMDI) method, proposing a unique proprietary set of factors that influence the level of CO2 emissions. The results of the study confirm that public expenditure contributes to reducing CO2 emissions at the regional level, while environmental expenditure is counterproductive. This tendency is observed mainly in regions with a high level of socioeconomic development, higher energy consumption, and high carbon emissions. The failure of environmental spending to reduce carbon dioxide emissions in Polish regions is explained by the “green paradox” hyp... [more]

In recent years, wind power in Brazil has emerged as an alternative to diversify the country′s energy mix and minimize the emission of pollutants derived from fossil fuels. The state of Rio Grande do Norte, in the Brazilian Northeast, has considerable potential for the generation of wind energy due to the occurrence of strong winds in many areas along the coast and in the interior of the state, in places with higher altitudes. However, wind energy, despite being considered clean and renewable, can cause environmental impacts in those places. Thus, the present study analyzed the perception of environmental impacts caused by the installation of wind farms in the agricultural areas of Northeast Brazil. The study was carried out in the municipality of Serra do Mel, in the western region of the state of Rio Grande do Norte, based on a survey of local farmers. The study concluded that farmers live without major problems and without apparent conflicts with wind farms but have little knowledge... [more]