The determination of methane content of coal seams is conducted in hard coal mines in order to assess the state of methane hazard but also to evaluate gas resources in the deposit. In the world’s mining industry, natural gas content in coal determination is usually based on direct methods. It remains the basic method in Poland as well. An important element in the determination procedure is the gas loss that occurs while collecting a sample for testing in underground conditions. In the method developed by the authors, which is a Polish standard, based on taking a sample in the form of drill cuttings, this loss was established at a level of 12%. Among researchers dealing with the methane content of coal, there are doubts related to the procedures adopted for coal sampling and the time which passes from taking a sample to enclosing it in a sealed container. Therefore, the studies were designed to evaluate the degree of degassing of the sample taken in the form of drill cuttings according... [more]

Supercritical water gasification (SCWG) is a promising technology for the valorization of wet biomass with a high-water content, which has attracted increasing interest. Many experimental studies have been carried out using conventional heating equipment at lab scale, where researchers try to obtain insight into the process. However, heat transfer from the energy source to the fluid stream entering the reactor may be ineffective, so slow heating occurs that produces a series of undesirable reactions, especially char formation and tar formation. This paper reviews the limitations due to different factors affecting heat transfer, such as low Reynolds numbers or laminar flow regimes, unknown real fluid temperature as this is usually measured on the tubing surface, the strong change in physical properties of water from subcritical to supercritical that boosts a deterioration in heat transfer, and the insufficient mixing, among others. In addition, some troubleshooting and new perspectives... [more]

Inter-provincial power transmission in China solved the problem of electricity production and consumption spatial mismatch, which also facilitated Chinese green energy transition and sustainable development. Aiming to understand the spatial patterns and main driving factors, this paper accounted the aggregate carbon intensity per electricity produced by each province, built the inter-provincial Out−Destination matrixes of carbon emission embodied in power transmission among 27 provincial areas of 2006 and 2019, and quantitatively analyzed the change in spatial patterns of carbon flow and carbon intensity difference between power inward and outward provinces. We found that the inter-provincial power transmission has led to the reduction in the national average carbon intensity per electricity produced from 0.855 kg/kWh in 2006 to 0.628 kg/kWh in 2019 and the green energy transition of all provinces. The spatial morphology characteristics of carbon flow show the ‘three corridors of West-... [more]

The primary objective of this paper is to identify the possibilities of using sugar beet pulp as feedstock to produce a variety of added-value products. Such an application of the sugar production byproducts contributes to implementing circular bio-economy, which is a source of many economic, social, and environmental benefits. Specific objectives of this paper are: (1) Presenting the concept and meaning of circular bio-economy. (2) Characterizing properties of the sugar beet pulp from the perspective of using them as feedstock. (3) Determining the volume of production of the sugar beet pulp and the current methods of using them. (4) Determining the methods of obtaining attractive bioproducts and renewable energy from sugar beet pulp. Special attention was given to the amount of sugar beet pulp produced in Polish sugar refineries. Poland is among the European countries in which the volume of produced sugar is especially high. Therefore, the problem of appropriate waste management in th... [more]

Remote and hybrid working models and accelerated digitalization of the human resources processes were introduced in most organizations worldwide as a consequence of the COVD-19 pandemic. This digital revolution at the workplace was forced by extraordinary circumstances, thus its impact had not been anticipated before. This motivated the authors to study the new work reality. The research was based on a hypothesis that the digitalization of work and the human resources processes, approaches organizations to the sustainable development ideal. Sustainability is here understood as maintaining a balance between economic, environmental, and social factors. The authors analyzed the impact between the digital processes and the way of working on the following areas: CO2 emissions, creating plastic waste, saving energy, creating a gender-diverse and inclusive workplace. To verify the hypothesis, the authors used their own original and desk research. The original research was conducted within a B... [more]

Poland is dynamically changing its energy mix. As a result of this process, solar energy is increasing its share in energy production. The development of the solar energy market is determined by numerous factors. This paper aims to develop a roadmap for further development of the photovoltaic (PV) energy market in Poland. The scope of the research covers five areas of PV technology and market development in Poland: (i) technology; (ii) power grids; (iii) law; (iv) economic conditions; and (v) social conditions. With the use of a Technology Roadmapping Methodology (TRM), for each of the determined areas, several factors were analyzed, and their development paths were described. In addition, the article focuses on technological challenges (regarding PV cells, modules, components, power conversion and monitoring and management system, optimizers, batteries, and other energy storage systems), grid efficiency, recycling, production costs, subsidies, public awareness and education, and the e... [more]

This Special Issue titled “Advanced Wastewater Treatment and Biomass Energy” aims to compile the latest research and challenges in the field of wastewater treatment and energy production to reduce the impact of human activities on the environment [...]

Solar energy is planned to undergo large-scale deployment along with Thailand’s transformation to a carbon neutral society in 2050. In the course of energy transformation planning, the issue of energy infrastructure adaptation to climate change has often been left out. This study aims to identify climate-related risks and countermeasures taken in solar power plants in Thailand using thematic analysis with self-administered observations and structured interviews in order to propose points of consideration during long-term energy planning to ensure climate adaptation capacity. The analysis pointed out that floods and storms were perceived as major climate events affecting solar power plants in Thailand, followed by lightning and fires. Several countermeasures were taken, including hard countermeasures that require extensive investment. Following policy recommendations were derived from the climate-proofing investment scenario study. Policy support in terms of enabling regulations or fina... [more]

Recent trends in the photovoltaic (PV) technology industry are moving towards utilizing bifacial PV panels. Unlike traditional PV panels, bifacial PV panels can yield energy from both sides of the panel. Manufacturers specify that bifacial PV panels can harness up to 30% more energy than traditional PV panels. Hence, bifacial PV panels are becoming a common approach at low solar irradiance conditions to yield more energy. However, a bifacial PV panel increases PV inverter loading. The PV inverter is the most unreliable component in the entire PV system. This results in a negative impact on PV system reliability and cost. Hence, it is necessary to anticipate the inverter’s reliability when used in bifacial PV panels. This paper analyzes the reliability, i.e., lifetime, of PV inverters, considering both monofacial and bifacial PV panels for the analysis. Results showed that the increase in bifacial energy yield could significantly affect PV inverter reliability performance, especially in... [more]

Despite its recent growth in popularity, actively heated clothing still lacks the ability to cope with demanding user scenarios. As many of these deficiencies stem from an absence of automatic control, the authors propose a novel approach using a set of sensors embedded in the clothing to provide data about thermal comfort. Available sensors suffer from a lack of accuracy, as for practical reasons, they cannot be attached to the skin, whose temperature is usually used as a comfort indicator. To determine the magnitude of the problem, the authors conducted experiments, and a thermal model was proposed based on experimental findings; the output from the model was compared with the experimental reference data for three different upper body undergarments. The overall accuracy was found to be good: in most cases, the difference between the computed and reference skin temperatures did not exceed 0.5 °C. Furthermore, the model does not rely on unrealistic assumptions regarding the availabilit... [more]

An investigation of the effects of wind gusts on the directly interconnected wind generators is reported, and techniques toward the mitigation of the wind gust negative influences have been proposed. Using a directly interconnected system approach, wind turbine generators are connected to a single synchronous bus or collection grid without the use of power converters on each turbine. This bus can then be transformed for transmission onshore using High Voltage Alternating Current, Low-Frequency Alternating Current or High Voltage Direct Current techniques with shared power conversion resources onshore connecting the farm to the grid. Analysis of the potential for instability in transient conditions on the wind farm, for example, caused by wind gusts is the subject of this paper. Gust magnitude and rise time/fall time are investigated. Using pitch control and the natural damping of the high inertial offshore system, satisfactory overall system performance and stability can be achieved du... [more]

In the last decades, a large focus is being placed on the sustainability and safety of the power transformer spectrum. Ester liquids, which have interesting properties such as high fire point and biodegradability, are gaining needed attraction. Since in-service condition, thermal aging deteriorates the physicochemical and electrical properties of liquid dielectrics, it is important to study their long-term behavior. In this contribution, the pre-breakdown and breakdown behavior of ester fluids (synthetic and natural) under AC stress are investigated. Important characteristics, such as partial discharge pre-inception voltage, partial discharge inception voltage, breakdown voltage, average streamer velocity, and inception electric field, were assessed. The influence of the radius of curvature (of high voltage needle electrode) as well as the thermal degradation of typical ester liquids are also discussed. Mineral oil was also included in the tests loop as a benchmark for comparative purp... [more]

In this paper, a two-bladed medium-sized floating wind turbine with variable speed and power regulation by stall is studied. For floating offshore wind turbines, the major challenges are related to the dynamical behavior of the system in response to combined wind and wave loading. Especially for smaller systems, the coupling of aerodynamic and wave forces may lead to large amplitude motions. Coupled aero-hydro-servo-elastic simulations are carried out in OpenFAST. The goal of the study is to investigate the global dynamic response of the hypothetical wind turbine with stall regulation. Stall regulation concept is proposed and the structural loads are computed and results are presented and discussed.

From the environmental perspective, wooden structures are favorable insulators that are suitable for carbon fixation and wooden-related products are considered the most sustainable material. Research has indicated that wooden structures have superior energy-saving performance compared to reinforced concrete (RC) structures. In this study, a CLT-based hybrid structure system that potentially improves the efficiency of energy consumption is proposed. The proposed hybrid structure system, which preserved original RC beams, columns and replaced CLT floors and walls, has less building weight compared to the original RC building. Additionally, less energy required for the manufacturing of building materials in the renovation of the aged building is achieved, compared to building a new CLT building. The energy consumptions for buildings with heights of 10 stories were compared. CLT and RC were selected as benchmark building materials to compare the energy-saving efficiencies with the proposed... [more]

This article presents the influence of climatic conditions on surface water quality. The research methodology, including physicochemical analysis from the Gołdapa and Bludzia rivers, is presented. The research lasted for two years. The results of the physicochemical studies of the Gołdapa and Bludzia rivers in early spring, spring, and autumn show that each of these seasons impacts the quality of surface waters. Moreover, it was proven that all the parameters are strongly correlated with the air temperature, the sum of daily precipitation, and water levels. For detailed analysis, the obtained results of own research were compared with meteorological and hydrological data from the last 15 years (2005−2021) for the region of north-eastern Poland. It was proven that temperature changes contribute to increased surface water pollution in the north-eastern part of Poland. Waters from areas that humans have not developed are of better quality than those that drain the urban area, which is ref... [more]

A distributed electric vehicle (EV) charging scheduling strategy with transactive energy (TE) management is presented in this paper to deal with technical issues in distribution network operation and discuss the economic benefits of EV charging. At an individual EV level, EV owners propose bids to actively participate in the distribution system operation. At the node level, an electric vehicle aggregator (EVA) optimally allocates the available charging power to meet EV charging requirements and cost benefits. At the distribution network level, a distribution system operator (DSO) integrates an electricity price market clearing mechanism with the optimal power flow (OPF) technique to ensure the reliability of the distribution network. Moreover, a distributed algorithm is discussed for solving the EV charging problem with transactive energy management (TEM). The clearing electricity price is achieved through a negotiation process between the DSO and EVAs using the alternating direction m... [more]

The recovery of oil and gas from underground reservoirs has a pervasive impact on petroleum-producing companies’ financial strength. A significant cause of the low recovery is the plugging of reservoir rocks’ interconnected pores and associated permeability impairment, known as formation damage. Formation damage can effectively reduce productivity in oil- and gas-bearing formations—especially in sandstone reservoirs endowed with clay. Therefore, knowledge of reservoir rock properties—especially the occurrence of clay—is crucial to predicting fluid flow in porous media, minimizing formation damage, and optimizing productivity. This paper aims to provide an overview of recent laboratory and field studies to serve as a reference for future extensive examination of formation damage mitigation/formation damage control technology measures in sandstone reservoirs containing clay. Knowledge gaps and research opportunities have been identified based on the review of the recent works. In additio... [more]

The present work performed a comprehensive investigation to find the effects of a dual-bleeding port recirculation channel on the aerodynamic performance of a single-stage transonic axial compressor, NASA Stage 37, and optimized the channel’s configuration to enhance the operating stability of the compressor. The compressor’s performance was examined using three parameters: The stall margin, adiabatic efficiency, and pressure ratio. Steady-state three-dimensional Reynolds-averaged Navier−Stokes analyses were performed to find the flow field and aerodynamic performance. The results showed that the addition of a bleeding channel increased the recirculation channel’s stabilizing effect compared to the single-bleeding channel. Three design variables were selected for optimization through a parametric study, which was carried out to examine the influences of six geometric parameters on the channel’s effectiveness. Surrogate-based design optimization was performed using the particle swarm op... [more]

The implementation of a dual electric system that is capable of operating with either constant current and variable voltage, or constant voltage and variable current appliances, is one of the possible options to solve low-intensity stochastic energy utilization problems from renewable energy sources. This research paper analyzes the potential benefit of a novel three-phase dual system power inverter over the conventional inverter used in a solar power plant. The concept of such a power inverter is explained, and the digital twin model is created in a MATLAB Simulink environment. The efficiency characteristic of the simulated inverter is compared to the efficiency characteristic of a real conventional inverter. A standalone data logging system and an additional data acquisition system were used to collect and process data from the real inverter. Comparison of the digital twin inverter and the real conventional inverter shows the potential benefit of this novel inverter technology. It is... [more]

The study posed a research question: did the situation caused by COVID-19 affect the economic position of energy companies? The aim of the study is to investigate the impact of the situation of the epidemic state introduced in 2020 on the activities of the efficiency of energy sector companies. The subject of the research will be the ten largest Polish power plants in terms of electricity production, including four capital groups to which they belong. Financial data from 2014 to 2020 will be used for the research. To test the effectiveness, the tools of the ratio analysis will be used. The analysis of the financial statements in terms of investments in manufacturing activities confirms the hypothesis that companies investing in new solutions and technologies will be best prepared for an exceptional situation. The results of the research show that those capital groups which in the period preceding the outbreak of the epidemic made the largest investment outlays and at the same time thei... [more]

Located in a semi-arid to arid region, Morocco is confronting increasing water scarcity challenges. In the circular economy paradigm, the reuse of treated wastewater in agriculture is currently considered a possible solution to mitigate water shortage and pollution problems. In recent years, Morocco has made significative progress in urban wastewater treatment under the National Wastewater Program (PNA). However, rural sanitation has undergone significant delays. Therefore, an alternative technology for wastewater treatment and reuse in rural areas is investigated in this review, considering the region’s economic, social, and regulatory characteristics. Constructed wetlands (CWs) are a simple, sustainable, and cost-effective technology that has yet to be fully explored in Morocco. CWs, indeed, appear to be suitable for the treatment and reuse of wastewater in remote rural areas if they can produce effluent that meets the standards of agricultural irrigation. In this review, 29 studies... [more]

Economical and environmental concerns have forced the oil and gas industry to consider reusing flowback and produced water for fracturing operations. The major challenge is that the high-salinity of flowback water usually prevents its compatibility with several fracturing fluid additives. In this paper, the authors explored an economic and effective method to prepare guar fracturing fluids with different salinity waters. The main research idea was to use chelating agents to mask metal ions, such as calcium and magnesium, that are harmful to crosslinking. Firstly, a complexometric titration test was conducted to measure the chelating ability of three chelating agents. Secondly, through viscosity, crosslinking, and hanging tests, it was verified that the complex masking method could cope with the problem of high-valence metal ions affecting crosslinking. Thirdly, the preferred chelating agent was mixed with several other additives, including thickeners, crosslinkers, and pH regulators, t... [more]

Solar-powered aircraft can perform long-term flights with clean solar energy. However, the energy derived from solar irradiation is influenced by the time of year and latitude, which limits the energy acquisition ability of solar aircraft with a straight-wing configuration. Hence, unconventional configurations based on increasing wing dihedral to track the sun are proposed to improve energy acquisition at high-latitude regions in winter, which may involve power loss caused by mismatch in the photovoltaic system. However, mismatch loss is seldom considered and may cause energy to be overestimated. In this paper, the energy acquisition characteristics of a joint-wing configuration are presented based on the simulation of an energy system to investigate the mismatch power loss. The results indicate a 4~15% deviation from the frequently used estimation method and show that the mismatch loss is influenced by the curved upper surface, the severity of shading and the circuit configuration. Th... [more]

Waste heat recovery is considered as one of the most promising options to improve the efficiency and sustainability of industrial processes. Even though industrial waste heat is abundantly available and its utilization is not a new concept, the implementation rate of waste-heat recovery interventions in industrial facilities is still low, due to several real or perceived barriers. Foremost challenges are represented by technical, economic, financial and regulatory factors. An additional prominent barrier lies in the lack or incompleteness of information concerning the material and energy flows within the factories, and the types and characteristics of waste heat sources and possible sinks for their internal or external reuse. With the aim to overcome some of the information barriers and increase the willingness of companies to approach waste heat recovery and reuse, a methodology to map waste heat sources and sinks in industrial processes is proposed in this study. The approach here pr... [more]

The aim of the proposed paper is the development of an electro-thermal model of semiconductor component using an indirect modelling approach. The approach is based on the integration of the component’s electrical properties considering non-linear behavior of a V-A characteristic. In this way, the identification of semiconductor material properties considering non-linear dependencies and semiconductor volume is provided. The main aim of the presented approach is simplification of the electro−thermal interaction within finite-element modelling of the semiconductor components. In this way, it is possible to omit more complex boundary definitions and the setting of the semiconductor-based physics. The proposed methodology is presented within the development of a simulation model based on a small high-frequency rectifying diode, taking into account its geometric dimensions and the internal arrangement of its structure. Simulation was performed as a transient analysis, while the results from... [more]