This article presents a solution that strengthens information security in critical infrastructure entities. Critical infrastructure plays a key role in the functioning of the state and the life of its citizens. Therefore, the protection of critical infrastructure is one of priorities in Poland. The aim of this article is to show that designated postal operators may become an important link in the process of information flow and cybersecurity. Based on their multiple-year experience and expended competences, the operators may provide digital services for entities responsible for the energy security infrastructure. Verification of this goal is necessary, since critical infrastructure is exposed to growing threats, both in the area of energy and other sensitive sectors of the economy. Research results presented in the article were obtained by conducting a CATI survey. The study used the purposeful selection method, which allows to influence the structure of a sample in the context of goal... [more]

Currently, the available studies on the prediction of building energy performance and real occupancy data are typically characterized by aggregated and averaged occupancy patterns or large thermal zones of reference. Despite the increasing diffusion of smart energy management systems and the growing availability of longitudinal data regarding occupancy, these two domains rarely inform each other. This research aims at understanding the potential of employing real-time occupancy data to identify better cooling strategies for activity-based-working (ABW)-supportive offices and reduce the overall energy consumption. It presents a case study comparing the energy performance of the office when different resolutions of occupancy and thermal zoning are applied, ranging from the standard energy certification approach to real-time occupancy patterns. For the first time, one year of real-time occupancy data at the desk resolution, captured through computer logs and Bluetooth devices, is used to... [more]

The fault current calculation model of photovoltaic (PV) power stations is usually treated as a capacity weighted equivalent model of a single PV generation unit (PVGU). However, in the same PV power station, different PVGUs have various fault current characteristics. As a result, there are significant differences in fault current characteristics between a PVGU and a PV power station. It means that the existing capacity weighted equivalent model cannot be used for accurately describing the fault current contributions from a practical PV power station. In this paper, the fault behaviors of the PVGUs located at different access points of a PV power station are firstly analyzed. The difference in PVGUs’ fault current contributions is identified and reflected with the activation states of current limiters that are employed for PV inverters. The activation states are represented by a theoretical expression so as to distinguish the PVGUs’ fault contributions. Further, based on the proposed t... [more]

The Electrically Excited Doubly Salient Variable Reluctance Machine (EEDSVRM) is a new type of brushless machine designed according to the principle of air gap reluctance change. There is neither permanent magnet steel nor excitation winding on the rotor. The rotor is made of silicon steel sheets, thus the structure of the variable reluctance machine is very simple. There are many optimization methods for this type of machine optimal design, such as novel machine topology optimization, finite element simulation-based optimization, mathematical analysis-based optimization, intelligent algorithm-based optimization, and multiple fusion-based optimization. Firstly, this article introduces the basic structure and working principle of the EEDSVRM and analyzes both its common regularity and individual difference. Then, the different optimization design methods of EEDSVRM are reviewed, the advantages and disadvantages of the different optimization methods are summarized, and the research inter... [more]

The paper explores the impacts of changes in renewable energy sources (RES) financing in Poland on the profitability of coupled photovoltaic panels and heat pump systems. The profitability analysis is conducted with the use of Net Present Value calculation and the return on investment period. The degree of change in profitability of using photovoltaic panels in Poland is dependent on the method of their financing. The analysis is carried out for two different photovoltaic support schemes: (1) the net-metering scheme currently in force in Poland; (2) the net-billing system scheduled for implementation in the year 2022. It is assumed for the analysis that two alternative heating and electricity supply systems for a single-family building will be operated: (a) a standard solution used in Poland consisting of a natural gas-fired boiler for heating and the purchase of electricity from the power grid, (b) an air/water heat pump used to heat the building, and electricity obtained from photovo... [more]

Carbonate sediments are susceptible to many factors, such as paleostructure, diagenesis, and strong microbial alteration; as such, their sedimentary architecture still calls for further research. In this study, the reef and shoal bodies in the XVm and XVp layers of the Middle−Upper Jurassic Karlov-Oxfordian in the S gas field were used as the object, and the architecture of the reef-shoal facies was studied. Based on the idea of “vertical grading and horizontal boundary”, the interface characteristics of the 6th to 4th levels of reef-shoal bodies in the study area were summarized, as were four ways to determine the boundaries of reef-shoal bodies. Based on the dense well network, we quantitatively described the scale of each small layer of single reef shoal body through the point-line-surface method and established a geological database of the reef shoal bodies in the study area. In addition, we established the width and thickness of the reef shoal body and the empirical formula for re... [more]

Considering the characteristics of narrow underground space and energy distribution, based on blade element momentum theory, Wilson optimization model and MATLAB programming calculation results, the torsion angle and chord length of wind turbine blade under the optimized conditions were obtained. Through coordinate transformation, the data were transformed into three-dimensional form. The three-dimensional model of the blade was constructed, and the horizontal axis wind turbine blade under the underground low wind speed environment was designed. The static structural analysis and modal analysis were carried out. Structural design, optimization calculation and aerodynamic analysis were carried out for three kinds of air ducts: external convex, internal concave and linear. The results show that the velocity distribution in the throat of linear air duct is relatively uniform and the growth rate is large, so it should be preferred. When the tunnel wind speed is 4.3 m/s and the rated speed... [more]

The paper proposes a new electrothermal model of a coupled inductor containing a nanocrystalline core dedicated to the analysis of electrical energy conversion systems. The formulated model has a form of a subcircuit for SPICE. The model takes into account the influence of direct current, frequency, skin effect, temperature, self-heating, and mutual thermal couplings on the parameters and characteristics of the coupled inductors. The form of the developed model and the method of model parameter estimation are presented. The applied measuring system is presented. The results of measurements and calculations made with the use of the proposed model are presented and commented on.

An essential prerequisite for safe transport and use of natural gas is their appropriate odorization. This enables the detection of uncontrolled gas leaks. Proper and systematic odorization inspection ensures both safe use of gas and continuity of the process itself. In practice, it is conducted through, among others, measuring odorant concentrations in gas. Control devices for rapid gas odorization measurements that are currently used on a large scale in the gas industry are equipped with electrochemical detectors selective for sulfur compounds like tetrahydrothiophene (THT). Because the selectivity of electrochemical detector response to one compound (e.g., THT), the available declarations of manufacturers show that detector sensitivity (indirectly also the quality of the measurement result) is influenced by the presence of increased e.g., sulfur or hydrogen compound content in the gas. Because of the lack of sufficient source literature data in this field, it was necessary to experi... [more]

Path planning can be considered the most vital task of the autonomous robot. In this task, selecting an optimal route from the starting to the target position becomes an important problem that must be addressed when multiple competing optimization priorities are considered. Thus, a novel route assessment strategy based on a multi-criteria decision-making approach is proposed. The m-generalized q-neutrosophic PROMETHEE (PROMETHEE-mGqNS) method is applied to aggregate the competing route assessment requirements and choose an optimal route. A case study is investigated to explain the proposed strategy for path planning in a typical environment and indicates the method stability when incomplete input data characteristics are present.

Owing to the recent increase in the number of warning reports and alerts on the dangers of fine dusts, there has been an increasing concern over fine dusts among citizens. In spaces with poor ventilation, the occupants are forced to open the window to initiate natural ventilation via the direct introduction of the outside air; however, this may pose a serious challenge if the external fine-dust concentration is high. The lack of natural ventilation increases the indoor carbon dioxide (CO2) concentration, thus necessitating the installation of mechanical ventilation systems. This study analyzed the frequency of the application of mechanical ventilation systems in the Multi-purpose activity space of elementary schools, which are spaces where children require a higher indoor air quality than adults owing to the rapid increase in the CO2 concentration of the Multi-purpose activity space during activities. In addition, the architectural and equipment factors of the Multi-purpose activity sp... [more]

Due to their low cost, facile fabrication, and high-power conversion efficiency (PCE), dye-sensitized solar cells (DSSCs) have attracted much attention. Ruthenium (Ru) complex dyes and organic solvent-based electrolytes are typically used in high-efficiency DSSCs. However, Ru dyes are expensive and require a complex synthesis process. Organic solvents are toxic, environmentally hazardous, and explosive, and can cause leakage problems due to their low surface tension. This review summarizes and discusses previous works to replace them with natural dyes and water-based electrolytes to fabricate low-cost, safe, biocompatible, and environmentally friendly DSSCs. Although the performance of “eco-friendly DSSCs” remains less than 1%, continuous efforts to improve the PCE can accelerate the development of more practical devices, such as designing novel redox couples and photosensitizers, interfacial engineering of photoanodes and electrolytes, and biomimetic approaches inspired by natural sys... [more]

Monitoring and control systems in the energy sector are specialized information structures that are not governed by the same information technology standards as the rest of the world’s information systems. Such industrial control systems are also used to handle important infrastructures, including smart grids, oil and gas facilities, nuclear power plants, water management systems, and so on. Industry equipment is handled by systems connected to the internet, either via wireless or cable connectivity, in the present digital age. Further, the system must work without fail, with the system’s availability rate being of paramount importance. Furthermore, to certify that the system is not subject to a cyber-attack, the entire system must be safeguarded against cyber security vulnerabilities, threats, and hazards. In addition, the article looks at and evaluates cyber security evaluations for industrial control systems, as well as their possible impact on the accessibility of industrial contro... [more]

Agriculture is the primary source of income in developing countries like India. Agriculture accounts for 17 percent of India’s total GDP, with almost 60 percent of the people directly or indirectly employed. While researchers and planters focus on a variety of elements to boost productivity, crop loss due to disease is one of the most serious issues they confront. Crop growth monitoring and early detection of pest infestations are still a problem. With the expansion of cultivation to wider fields, manual intervention to monitor and diagnose insect and pest infestations is becoming increasingly difficult. Failure to apply on time fertilizers and pesticides results in more crop loss and so lower output. Farmers are putting in greater effort to conserve crops, but they are failing most of the time because they are unable to adequately monitor the crops when they are infected by pests and insects. Pest infestation is also difficult to predict because it is not evenly distributed. In the re... [more]

Precise estimation of total organic carbon (TOC) is extremely important for the successful characterization of an unconventional shale reservoir. Indirect traditional continuous TOC prediction methods from well-logs fail to provide accurate TOC in complex and heterogeneous shale reservoirs. A workflow is proposed to predict a continuous TOC profile from well-logs through various ensemble learning regression models in the Goldwyer shale formation of the Canning Basin, WA. A total of 283 TOC data points from ten wells is available from the Rock-Eval analysis of the core specimen where each sample point contains three to five petrophysical logs. The core TOC varies largely, ranging from 0.16 wt % to 4.47 wt % with an average of 1.20 wt %. In addition to the conventional MLR method, four supervised machine learning methods, i.e., ANN, RF, SVM, and GB are trained, validated, and tested for continuous TOC prediction using the ensemble learning approach. To ensure robust TOC prediction, an ag... [more]

A three-electrode alternating current fused magnesia furnace (AFMF) with advanced control technology was evaluated by combined energy and exergy analysis. To gain insight into the mass flow, energy flow and exergy efficiency of the present fused magnesia furnace, the exergy destruction was analysed to study the energy irreversibility of the furnace. Two different production processes, the magnesite ore smelting process (MOP) and light-calcined magnesia process (LMP), are discussed separately. Two methods were carried out to improve LMP and MOP; one of which has been applied in factories. The equipment consists of an electric power supply system, a light-calcined system and a three-electrode fused magnesia furnace. All parameters were tested or calculated based on the data investigated in industrial factories. The calculation results showed that for LMP and MOP, the mass transport efficiencies were 16.6% and 38.3%, the energy efficiencies were 62.2% and 65.5%, and the exergy destruction... [more]

Fractional slot, PMSM motors with a properly designed electromagnetic circuit allow for obtaining high power density factors (more than 4 kW per 1 kg of total motor weight). The selection of the number of magnetic poles to the specific dimensions and operating conditions of the motor, as well as the number of slots for the selected number of magnetic poles is the subject of the analysis in this article. This issue is extremely important because it affects the mass of the motor, the value of shaft torque, shaft power and the value of rotor losses. The aim of the work is to select solutions with the highest values of power density factor and, at the same time, the lowest values of rotor losses. The object of the study is a fractional slot PMSM motor with an external solid rotor core with surface permanent magnets (SPM). Motor weight is approximately 10 kg, outer diameter is 200 mm and a maximum power is 50 kW at 4800 r/min. The article analyzes the selection of magnetic poles in the rang... [more]

Renewable energy sources are becoming more relevant in recent decades in power generation, leading to investment in developing efficient systems. Specifically, in photovoltaic energy, modular converters are attracting interest since their characteristics enable them to work at high voltage and optimize the generated energy. However, the control strategies found the literature limit the scalability potential of modular converters. The main aim of this paper is to propose a scalable control strategy for a grid-tied CHB (Cascaded H-Bridge) converter for large-scale photovoltaic power plants. The control proposed is able to take full advantage of converter scalability and modularity, being based on the parameters needed for bipolar sinusoidal PWM (Pulse Width Modulation), and thus reducing the calculus required and simplifying its implementation. Power imbalances are overcome including the zero-sequence vector injection to allow power exchange between phases. Furthermore, the parameter use... [more]

Circulating Fluidized Bed gasifiers are widely used in industry to convert solid fuel into liquid fuel. The Artificial Neural Network and neuro-fuzzy algorithm have immense potential to improve the efficiency of the gasifier. The main focus of this article is to implement the Artificial Neural Network and Adaptive Neuro-Fuzzy Inference System modeling approach to estimate solid circulation rate at high pressure in the Circulating Fluidized Bed gasifier. The experimental data is obtained on a laboratory scale prototype in the Chemical Engineering laboratory at COMSATS University Islamabad. The Artificial Neural Network and Adaptive Neuro-Fuzzy Inference System use four input features—pressure, single mean diameter, total valve opening and riser dp—and one output feature mass flow rate with multiple neurons in the hidden layers to estimate the flow of solid particles in the riser. Both Artificial Neural Network and Adaptive Neuro-Fuzzy Inference System model worked on 217 data samples an... [more]

Due to the effects of splitting frequency and cross coupling, the resonant frequency of the WPT system usually deviates from the given frequency band, and the system operating at the given frequency band suffers a very low output power. Ensuring that electric vehicle wireless power transfer (EV-WPT) systems operate at a resonant state is the prerequisite for efficient energy transfer. For this purpose, a novel design method by manipulating the eigenstate parameters is proposed in this paper. The proposed system can make a EV-WPT system with arbitrary coil successfully to resonate at any given bands, not just a single band. Therefore, the method designed in this article cannot only eliminate the problem of low power caused by frequency deviation, but also realize the application requirements of multiple frequency bands. Firstly, this article establishes an accurate state space model of an n-coil fully coupled EV-WPT system, and after that, the analytical current response on each circuit... [more]

Lowering the condensing temperature of the Refrigeration and Air-conditioning (RAC) system has been proven to effectively increase the system’s Coefficient of Performance (COP). This paper revolves around evaluating the energy-saving generated by applying a Thermal Diode Tank (TDT) in the RAC systems. The TDT is a novel invention, which is an insulated water tank equipped with gravity heat pipes. If the TDT was placed outdoors overnight, its inside water would theoretically be at the minimum ambient temperature of the previous night. When the TDT water is used to cool the condenser of RAC systems that operate during the daytime, a higher COP of this TDT assisted RAC (TDT-RAC) system could be achieved compared with the baseline system. In this study, a steady-state performance simulation model for TDT-RAC cycles has been developed. The model reveals that the COP of the TDT-RAC cycle can be improved by 10~59% over the baseline cycle depending on the compressor types. The TDT-RAC cycle wi... [more]

Critical infrastructures have recently been integrated with digital controls to support intelligent decision making. Although this integration provides various benefits and improvements, it also exposes the system to new cyberattacks. In particular, the injection of false data and commands into communication is one of the most common and fatal cyberattacks in critical infrastructures. Hence, in this paper, we investigate the effectiveness of machine-learning algorithms in detecting False Data Injection Attacks (FDIAs). In particular, we focus on two of the most widely used critical infrastructures, namely power systems and water treatment plants. This study focuses on tackling two key technical issues: (1) finding the set of best features under a different combination of techniques and (2) resolving the class imbalance problem using oversampling methods. We evaluate the performance of each algorithm in terms of time complexity and detection accuracy to meet the time-critical requiremen... [more]

We examine the critical pore radius that results in critical gas saturation during pure methane hydrate dissociation within geologic porous media. Critical gas saturation is defined as the fraction of gas volume inside a pore system when the methane gas phase spans the system. Analytical solutions for the critical pore radii are obtained for two, simple pore systems consisting of either a single pore-body or a single pore-body connected with a number of pore-throats. Further, we obtain critical values for pore sizes above which the production of methane gas is possible. Results shown in the current study correspond to the case when the depression of the dissociation temperature (due to the presence of small-sized pores; namely, with a pore radius of less than 100 nm) is considered. The temperature shift due to confinement in porous media is estimated through the well-known Gibbs-Thompson equation. The particular results are of interest to geological media and particularly in the methan... [more]

A thermoelectric module is a device that converts electrical energy into thermal energy through a mechanism known as the Peltier effect. A Peltier device has hot and cold sides/substrates, and heat can be pumped from the cold side to the hot side under a given voltage. By applying it in buildings and attaching it to building envelope components, such as walls, as a heating and cooling device, the heating and cooling requirements can be met by reversing the voltage applied on these two sides/substrates. In this paper, we describe a novel, panelized, ground source, radiant system design for space heating and cooling in buildings by utilizing the Peltier effect. The system is equipped with water pipes that are attached to one side of the panel and connected with a ground loop to exchange heat between the cold/hot sides of the thermoelectric module and the underground region. The ground loop is inserted in boreholes, similar to those used for a vertical closed-loop Ground Source Heat Pump... [more]

This paper presents experimental determination of the heat transfer coefficient and the friction factor in an internally rifled tube. The experiment was carried out on a laboratory stand constructed in the Department of Energy of the Cracow University of Technology. The tested tube is used in a Polish power plant in a supercritical circulating fluidized bed (CFB) boiler with the power capacity of 460 MW. Local heat transfer coefficients were determined for Reynolds numbers included in the range from ~6000 to ~50,000, and for three levels of the heating element power. Using the obtained experimental data, a relation was developed that makes it possible to determine the dimensionless Chilton−Colburn factor. The friction factor was also determined as a function of the Reynolds number ranging from 20,000 to 90,000, and a new correlation was developed that represents the friction factor in internally ribbed tubes. The local heat transfer coefficient and the friction factor obtained during t... [more]