The aim of this work involved comparing the effect graphite and shungite have on the properties of dielectric elastomer-based materials. For this reason, dielectric elastomer−Sylgard (S) was filled with 1, 3, 5, 10, and 15 wt.% of graphite (G) and shungite (Sh). The structure of the obtained materials was studied by means of scanning electron microscopy and atomic force microscopy. The influence of the introduced additives on the thermal stability of the obtained composites was evaluated using thermogravimetry. Moreover, the mechanical properties and the dielectric constant of the elastomer with an addition of graphite and shungite were determined. Obtained results allowed us to establish that the presence of graphite as well as shungite significantly influences mechanical as well as dielectric properties. Additionally, the optimum mass of additives, allowing to increase the dielectric constant without the significant decrease of strain at break, was indicated. In the case of materials... [more]

In order to deepen the understanding of rotating effects on internal cooling, the flow and heat transfer characteristics of 2-pass rotating rectangular smooth/ribbed channels are investigated by Reynolds-Averaged Navier-Stokes (RANS) simulation. Three rotating numbers (Ro = 0.10, 0.25, and 0.40) are simulated, and the maximum buoyancy parameter (Bo) reaches 5.0. The results show that the rotating buoyancy has significant effects on the flow and heat transfer under high Bo conditions. When Bo > 1.0, rotating buoyancy inducts flow separation near the leading edge (LE) in the first passage, while the air flow in the second passage shows a double-peak profile. With increased Bo, the heat transfer in the first passage is greatly increased, and the maximum growth rate occurs at Bo = 0.6~1.0. However, the heat transfer in the second passage has no obvious changes due to a strong turn effect. In the ribbed channel, rotating effects are much weaker than those in the smooth channel. This researc... [more]

In this study, three different environmentally friendly fouling mitigation technologies are suggested and are investigated in reverse electrodialysis (RED) to develop the most appropriate fouling mitigation technology for RED: applying direct current, flowing a solution with high salt concentration, and periodically switching river and seawater streams in RED. The quantitative level of anion exchange membrane fouling mitigation is evaluated in terms of the power density and the amount of power generation of RED. Applying a direct current electric field with higher voltage than 8 V was not allowed for fouling mitigation in the two-cell-pair bench RED stack due to decomposition of the redox couple. In comparison of the RED operations with two different fouling mitigation methods using firstly 40-min power generation during in-operation and 40-min fouling mitigation stage during out-of-operation as a cycle for 80 min and secondly 80-min forward power generation and 80-min backward power g... [more]

Transition metal dichalcogenide (TMD) MoS2 and WS2 monolayers (MLs) deposited atop of crystalline zinc oxide (ZnO) and graphene-like ZnO (g-ZnO) substrates have been investigated by means of density functional theory (DFT) using PBE and GLLBSC exchange-correlation functionals. In this work, the electronic structure and optical properties of studied hybrid nanomaterials are described in view of the influence of ZnO substrates thickness on the MoS2@ZnO and WS2@ZnO two-dimensional (2D) nanocomposites. The thicker ZnO substrate not only triggers the decrease of the imaginary part of dielectric function relatively to more thinner g-ZnO but also results in the less accumulated charge density in the vicinity of the Mo and W atoms at the conduction band minimum. Based on the results of our calculations, we predict that MoS2 and WS2 monolayers placed at g-ZnO substrate yield essential enhancement of the photoabsorption in the visible region of solar spectra and, thus, can be used as a promising... [more]

Ground source heat pumps (GSHPs), a high-efficiency and energy-saving air-conditioning technology that utilizes shallow geothermal resources for both heating and cooling, are a vital green energy system for residential and commercial buildings. Improving the performance of such a system was the focus of the current research. As soil temperature and thermal radius are two important aspects that affect the performance of ground source heat pump systems, we conducted a new numerical simulation to capture the changes in sensitive factors and propose the optimized paths. The numerical simulation analyzed the thermal characteristics of a borefield under different pre-cooling times and soil types. The results indicated the following: (1) The rate of the ground temperature change with pre-cooling during the discharging period had a faster rise than in the case without pre-cooling. The longer the precooling time was, the smaller the thermal radius became. In particular, when the precooling time... [more]

Short-term load forecasting is an important part of load forecasting, which is of great significance to the optimal power flow and power supply guarantee of the power system. In this paper, we proposed the load series reconstruction method combined improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) with sample entropy (SE). The load series is decomposed by ICEEMDAN and is reconstructed into a trend component, periodic component, and random component by comparing with the sample entropy of the original series. Extreme learning machine optimized by salp swarm algorithm (SSA-ELM) is used to predict respectively, and the final prediction value is obtained by superposition of the prediction results of the three components. Then, the prediction error of the training set is divided into four load intervals according to the predicted value, and the kernel probability density is estimated to obtain the error distribution of the training set. Combining the pre... [more]

Landfills are elements of the waste management system, without possibility of further reclaiming, according to the requirements of a closed-loop economy, but with the possibility of transforming the area into other functions. The research combined monitoring of plant species, suggesting the composition of vegetation cover for pro-ecological management, analysis of functional and infrastructural incorporation of the landfill in the surrounding landscape, and proposals for reclamation and social application. An assessment of geotechnical safety was also made. Modernization of the landfill suggests that the pressure placed on other untouched locations should decrease. The designed space allows reintroducing socio-ecological life into this degraded area. Taking advantage of the character of the area, including variable development and significant landscape potential on the outskirts of a large city in the vicinity of protected areas, there is the possibility of creating new spatial quality... [more]

The thermoelectric refrigeration system is an application of the Peltier effect, and good refrigeration performance is dependent on effective heat dissipation performance. To enhance the cooling performance of the thermoelectric system, this paper designs a new type of finned heat sink, which does not change the overall size of the thermoelectric system. The performance of the refrigeration system under the new fin is tested by experiments under various conditions. During the experiment, the cooling wind speed, the temperature of the hot and cold side of the TEC, the power consumption of the fan, and other parameters were directly recorded through the measuring instrument. The results show that the use of new finned heat sinks can improve the COP of the thermoelectric refrigeration system. Within the scope of the study, the thermal resistance of the new fins can be reduced by 42.6%, and the system COP value can be increased by 22.8%. In addition, increasing the cooling wind speed can f... [more]

Biochar may contribute to both agricultural productivity and atmospheric carbon dioxide removal. However, despite the many potential upsides of adding biochar to amend carbon-depleted soils in sub-Saharan Africa, deployment is largely lacking. This paper explores the socio-economic factors that can explain tendencies to avoid action. Based on a survey of 172 farming households, key informant interviews, and focus group discussions in the Mbeya and Songwe regions of Tanzania, which were targeted for a biochar aid program in 2014, several socio-economic drivers behind the continued use of biochar deployment were identified in this follow-up study. A key deployment driver was the increased crop yields, perceived to be the result of adding biochar to soils, increasing yields from 1 metric ton per hectare to 3 metric tons per hectare. Food security and family income were cited as the main reasons to engage in biochar production and use. Climate change mitigation and increased resilience wer... [more]

This comparative research investigates the influence of a flexible magnetic flux and a chemical change on the freely fluid motion of a (MHD) magneto hydrodynamic boundary layer incompressible nanofluid across an exponentially expanding sheet. Water and ethanol are used for this analysis. The temperature transmission improvement of fluids is described using the Buongiorno model, which includes Brownian movement and thermophoretic distribution. The nonlinear partial differential equalities governing the boundary layer were changed to a set of standard nonlinear differential equalities utilizing certain appropriate similarity transformations. The bvp4c algorithm is then used to tackle the transformed equations numerically. Fluid motion is slowed by the magnetic field, but it is sped up by thermal and mass buoyancy forces and thermophoretic distribution increases non-dimensional fluid temperature resulting in higher temperature and thicker boundary layers. Temperature and concentration, on... [more]

Road transport contributes to almost a quarter of carbon dioxide emissions in the EU. To analyze the exhaust emissions generated by vehicle flows, it is necessary to use specialized emission models, because it is infeasible to equip all vehicles on the road in the tested road sections with the Portable Emission Measurement System (PEMS). However, the currently used emission models may be inadequate to the investigated vehicle structure or may not be accurate due to the used macroscale. This state of affairs is especially related to full hybrid vehicles, since there are none of the microscale emission models that give estimated emissions values exclusively for this kind of drive system. Several automakers over the past decade have invested in hybrid vehicles with great opportunities to reduce costs through better design, learning, and economies of scale. In this work, the authors propose a methodology for creating a CO2 emission model, which takes relatively little computational time, a... [more]

China aims to peak carbon emissions by 2030. As a result, small-scale coal-fired combined heat and power (CHP) units and self-provided units are gradually shut down, and large-scale coal-fired CHP units are a solution to undertake the industrial heat loads. From the perspective of the industrial heat load allocation during the non-heating season, the problems regarding the coal-saving scheduling strategy of coal-fired CHP units are addressed. The steam-water equations of CHP units are established to analyze the heat-power coupling characteristics. The energy utilization efficiency, exergy efficiency and the coal consumption are analyzed. The optimization model of saving coal consumption is established and the adaptive mutation particle swarm optimization (AMPSO) is introduced to solve the above model. The 330 MW coal-fired CHP unit is taken as an example, and the results show that for the constant main flow rate, each increase of 1 t/h industrial steam extraction will reduce the power... [more]

In this paper, a new application of Bonobo (BO) metaheuristic optimizer is presented for PV parameter extraction. Its processes depict a reproductive approach and the social conduct of Bonobos. The BO algorithm is employed to extract the parameters of both the single diode and double diode model. The good performance of the BO is experimentally investigated on three commercial PV modules (STM6-40 and STP6-120/36) and an R.T.C. France silicon solar cell under various operating circumstances. The algorithm is easy to implement with less computational time. BO is extensively compared to other state of the art algorithms, manta ray foraging optimization (MRFO), artificial bee colony (ABO), particle swarm optimization (PSO), flower pollination algorithm (FPA), and supply-demand-based optimization (SDO) algorithms. Throughout the 50 runs, the BO algorithm has the best performance in terms of minimal simulation time for the R.T.C. France silicon, STM6-40/36 and STP6-120/36 modules. The fitnes... [more]

Geothermal energy is a resource that has the potential for development in many countries around the world. Despite its versatility and economic viability, this resource faces numerous obstacles that hinder its deployment and capacity for achieving a similar market share as other renewable and clean energy sources. Both technical and non-technical barriers can be highly detrimental to the implementation of geothermal projects. A social license to operate (SLO) is a tool that can help the deployment of geothermal energy. As a new concept, SLO is little developed in the business literature but is still being adopted in many industries. Its main challenges reside in its context-dependence and the lack of clear frameworks to utilize it. This paper introduces, in a first known attempt, through a qualitative approach, a conceptual model of the social license to operate in the geothermal energy sector. For its development, three case studies, working group discussion and surveying were conduct... [more]

The Republic of Djibouti has untapped potential in terms of renewable energy resources, such as geothermal, wind, and solar energy. This study examines the economic feasibility of green hydrogen production by water electrolysis using wind and geothermal energy resources in the Asal−Ghoubbet Rift (AG Rift), Republic of Djibouti. It is the first study in Africa that compares the cost per kg of green hydrogen produced by wind and geothermal energy from a single site. The unit cost of electricity produced by the wind turbine (0.042 $/kWh) is more competitive than that of a dry steam geothermal plant (0.086 $/kWh). The cost of producing hydrogen with a suitable electrolyzer powered by wind energy ranges from $0.672/kg H2 to $1.063/kg H2, while that produced by the high-temperature electrolyzer (HTE) powered by geothermal energy ranges from $3.31/kg H2 to $4.78/kg H2. Thus, the AG Rift area can produce electricity and green hydrogen at low-cost using wind energy compared to geothermal energy... [more]

Currently, fossil fuels are still the primary fuel source and reducing agent in the steel industries. The utilization of fossil fuels is strongly associated with CO2 emissions. Therefore, an alternative solution for green steel production is highly recommended, with the use of biomass as a source of fuel and a reducing agent. Biomass’s growth consumes carbon dioxide from the atmosphere, which may be stored for variable amounts of time (carbon dioxide removal, or CDR). The pellets used in this study were prepared from a mixture of low-grade iron ore and palm kernel shells (PKS). The reducing reactivity of the pellets was investigated by combining thermogravimetric analysis (TGA) and laboratory experiments. In the TGA, the heating changes stably from room temperature to 950 °C with 5−15 °C/min heating rate. The laboratory experiments’ temperature and heating rate variations were 600−900 °C and 10−20 °C/min, respectively. Additionally, the reduction mechanism was observed based on the X-r... [more]

Building-level electrical distribution systems comprise a myriad of current-carrying equipment, conversion devices, and protection devices that deliver power from the utility or local distributed energy resources to end-use building loads. Electric power has traditionally been generated, transmitted, and distributed in alternating current (AC). However, the last decade has seen a significant increase in the integration of native direct current (DC) equipment that has elevated the importance of DC distribution systems. Numerous studies have comparatively examined the performance of various electrical distribution systems in buildings but have failed to achieve uniform conclusions, primarily because of a lack of consistent and analogous performance evaluation methods. This paper aims to fill this gap by providing a standard set of metrics and measurement boundaries to consistently evaluate the performance of AC, DC, or hybrid AC/DC electrical distribution systems. The efficacy of the pro... [more]

The increase in frequency and intensity of natural disasters is related to the changing global average temperature. Reducing greenhouse gas emissions and the extraction of natural resources is one of the solutions proposed by the European Green Deal and the 17 Sustainable Development Goals (SDGs) approved by the United Nations. The article presents research on municipal solid waste incineration bottom ash (MSWIBA), which is the basis for its circulation in the idea of the circular economy. The MSWIBA study presents differential thermogravimetry (DTG), glassy phase, and mortars using CSA and CEM I. The management of MSWIBA contributes to reducing greenhouse gas emissions and the extraction of natural resources.

Photovoltaic (PV) system installation has encouraged to be further expedited to minimize climate change and thus, rooftop solar PV systems have been sparkled in every corner of the world. However, due to technological constraints linked to voltage and currents, the PV hosting capacity has been substantially constrained. Therefore, this paper proposes a competent approach to maximize PV hosting capacity in a low voltage distribution network based on voltage control and dynamic line rating of the cables. Coordinated voltage control is applied with an on-load tap changing transformer, and reactive power compensation and active power curtailment of PV inverters. A case study with probabilistic and deterministic assessments is carried out on a real Sri Lankan network to show how the PV hosting capacity is constrained. The findings revealed the capability of integrated voltage control schemes and dynamic line rating in maximizing hosting capacity. The study is expanded by incorporating the P... [more]

The article presents tests on the possibility of using ultrasonic transducers for accurate distance measurement in hard coal mines. In order to check the impact of selected disturbing factors on the measurement results, test stands were built, and then a full cycle of measurements with the use of different transducers (AR30 and AR41), which were selected and pre-tested in previous research projects, was realized. The impact of such disturbing factors as airborne dust (coal, stone, lime and mixed dust), changes in temperature and humidity on the propagation of ultrasonic waves, amplitude and measurement accuracy was investigated. The tests were preceded by theoretical analysis. It was found that the transducers selected for the tests had a sufficient accuracy and range, so they can be used in the devices planned to be designed, allowing for the determining of the location of a roadheader in hard coal mine roadways, taking into account technical and legal restrictions. It was also specif... [more]

This paper uses decomposition analysis to investigate the key contributions to changes in greenhouse gas emissions in different scenarios. We derive decomposition formulas for the three highest-emitting sectors: power generation, industry, and transportation (both passenger and freight). These formulas were applied to recently developed 1.5 °C emission scenarios by the Integrated Model to Assess the Global Environment (IMAGE), emphasising the role of renewables and lifestyle changes. The decomposition analysis shows that carbon capture and storage (CCS), both from fossil fuel and bioenergy burning, renewables and reducing carbon intensity provide the largest contributions to emission reduction in the scenarios. Efficiency improvement is also critical, but part of the potential is already achieved in the Baseline scenario. The relative importance of different emission reduction drivers is similar in the OECD (characterised by relatively high per capita income levels and emissions) and n... [more]

This study aimed to assess biomass production costs from perennial energy crops, such as Miscanthus giganteus, Sida hermaphrodita, and coppiced willow, in selected agricultural holdings. This assessment was based on applied technologies for harvesting the biomass of the energy crops mentioned above. The scope of the study included research on ten farms located in Małopolska and establishing the possibility of biomass production from selected energy crops in these entities. Biomass production costs have been estimated using the computer application “Bioalkylation”. The result of the research was the answer to the question: what can be the cost range of biomass production from perennial energy crops for the crops Miscanthus giganteus, Sida hermaphrodita, and coppiced willow as the most popular plants? The study shows that production costs depend primarily on the harvesting technology used and the machinery used in the farm. The harvest with rotary mowers, small presses, and windrows was... [more]

Load forecasting (LF) is essential in enabling modern power systems’ safety and economical transportation and energy management systems. The dynamic balance between power generation and load in the optimization of power systems is receiving increasing attention. The intellectual development of information in the power industry and the data acquisition system of the smart grid provides a vast data source for pessimistic load forecasting, and it is of great significance in mining the information behind power data. An accurate short-term load forecasting can guarantee a system’s safe and reliable operation, improve the utilization rate of power generation, and avoid the waste of power resources. In this paper, the load forecasting model by applying a fusion of Improved Sparrow Search Algorithm and Long Short-Term Memory Neural Network (ILSTM-NN), and then establish short-term load forecasting using this novel model. Sparrow Search Algorithm is a novel swarm intelligence optimization algor... [more]

With the rapid expansion of renewable energy, the penetration rate of behind-the-meter (BTM) solar photovoltaic (PV) generators is increasing in South Korea. The BTM solar PV generation is not metered in real-time, distorts the electric load and increases the errors of load forecasting. In order to overcome the problems caused by the impact of BTM solar PV generation, an extreme gradient boosting (XGBoost) load forecasting algorithm is proposed. The capacity of the BTM solar PV generators is estimated based on an investigation of the deviation of load using a grid search. The influence of external factors was considered by using the fluctuation of the load used by lighting appliances and data filtering based on base temperature, as a result, the capacity of the BTM solar PV generators is accurately estimated. The distortion of electric load is eliminated by the reconstituted load method that adds the estimated BTM solar PV generation to the electric load, and the load forecasting is co... [more]

A fundamental task in the dynamic simulation of parabolic trough power plants (PTPP) is to understand the behavior of the system physics and control loops in the presence of weather variations. This study provides a detailed description of the advanced controllers used in the power block (PB) of a 50 MWel parabolic trough power plant (PTPP). The PB model is achieved using APROS software based on the actual specifications of the existing power plant. To verify the behaviour of the PB model, a comparison between the simulated results and given real data is documented depending on a previous study, and the results indicate a reasonable degree of correspondence. The purpose of this study is to create reference models for the PB. Thereby, developers and engineers will have a better understanding of the state of the art of advanced control loops in these power plants. Moreover, these types of models can be used to specify the most suitable mode of operation for the power plant. In addition,... [more]