The submission includes SimaPro project for LCA of SOFCs with 10-year replacement plan, a text file explaining how to run the SimaPro file, and SOFC inventory tables provided in an Excel file.

In the last years the greenhouse effect has been significantly intensified due to human activities, generating large additional amounts of Greenhouse gases (GHG). The fossil fuels are the main causes of that. Consequently, the attention on the composition of the national fuel mix has significantly grown, and the renewables are becoming a more significant component. In this context, biomass is one of the most important sources of renewable energy with a great potential for the production of energy. The study has evaluated, through an LCA (Life Cycle Assessment) study, the attitude of alfalfa (Medicago sativa) as “no food” biomass alternative to maize silage (corn), in the production of biogas from anaerobic digestion. Considering the same functional unit (1 m3 of biogas from anaerobic digestion) and the same time horizon, alfalfa environmental impact was found to be much comparable to that of corn because it has an impact of about 15% higher than corn considering the total score from di... [more]

Nowadays, there is a growing promotion to label products ecologically in European markets. Knowing that daily products have relevant environmental impact associated with their production, it is of utmost importance to analyse all the related production processes for a better understanding of each process impact. The present study analysed the potential environmental impacts of a Portuguese regional product, the Beira Baixa cheese, coming from the largest national sheep milk region. So, a life cycle assessment (LCA) methodology is used from -cradle-to -gate, including the supplying of the animal feedstock. Impact calculations are performed using the ReCiPe midpoint 2008 method, allowing an analysis of the environmental impacts contributing to climate change, terrestrial acidification, freshwater and marine eutrophication of all productive processes. The results have shown that the greatest impacts occur within the milk production process for all four selected impact categories. This hap... [more]

This study investigated the degradation of the herbicides diquat (DQ) and paraquat (PQ) by a solar photo-Fenton process that is mediated by Fe(III)-oxalate complexes at circumneutral pH = 6.5 in compound parabolic collectors (CPC)-type reactors. The photo-Fenton process operates efficiently at acidic pH; however, circumneutral operation was key to overcome drawbacks, such as acidification and neutralization steps, reagent costs, and the environmental footprint of chemical auxiliaries. This work revealed a remarkable reduction of total organic carbon for PQ (87%) and DQ (80%) after 300 min (at ca. 875 kJ L−1). Phytotoxicity assays confirmed that the treatment led to a considerable increase in the germination index for DQ (i.e., from 4.7% to 55.8%) and PQ (i.e., from 16.5% to 59.7%) using Cucumis sativus seeds. Importantly, treatment costs (DQ = USD$8.05 and PQ = USD$7.72) and the carbon footprint of the process (DQ = 7.37 and PQ = 6.29 kg CO2-Eqv/m3) were within the ranges that were rep... [more]

This study describes the technological processes and characteristics of biomass direct combustion power generation, biomass gasification power generation, biomass mixed combustion power generation, and biomass biogas power generation in terms of their importance and application in China. Under the perspective of environmental and economic sustainability, the life cycle assessment (LCA) method and dynamic analysis method based on time value are used to simulate and evaluate the environmental loads and economic benefits of different power generation processes. By comparing with coal-fired power generation systems, the environmental and economic benefits of different biomass power generation technologies are illustrated. The results shows that biomass gasification power generation has the best environmental benefits, with a total load of 1.05 × 10−5, followed by biomass biogas power generation (9.21 × 10−5), biomass direct combustion power generation (1.23 × 10−4), and biomass mixed combu... [more]

Empty fruit bunch (EFB) utilization to produce valuable bio-chemicals is seen as an economical and sustainable alternative to waste management in palm oil industries. This work proposed an integrated biorefinery configuration of EFB valorization considering sustainability pillars—namely, economic, environmental, and safety criteria. Techno-economic analysis, life cycle assessment, and hazard identification ranking methods were used to estimate annual profit, global warming potential (GWP), fire explosion damage index (FEDI), and toxicity damage index (TDI) of the proposed integrated biorefinery. A multi-objective optimization problem was then formulated and solved for simultaneous maximization of profit and minimization of GWP, FEDI and TDI. The resulting Pareto-optimal solutions convey the trade-off among the economic, environmental, and safety performances. To choose one of these optimal solutions for implementation, a combined approach of fuzzy analytical hierarchy process and a tec... [more]

Waste recycling is an essential part of waste management. The concrete industry allows the use of large quantities of waste as a substitute for a conventional raw material without sacrificing the technical properties of the product. From a circular economy point of view, this is an excellent opportunity for waste recycling. Nevertheless, in some cases, the recycling process can be undesirable because it does not involve a net saving in resource consumption or other environmental impacts when compared to the conventional production process. In this study, the environmental performance of conventional absorption porous barriers, composed of 86 wt % of natural aggregates and 14 wt % cement, was compared with barriers composed of 80 wt % seashell waste and 20 wt % cement through an attributional cradle-to-grave life cycle assessment. The results show that, for the 11 environmental impact categories considered, the substitution of the natural aggregates with seashell waste involves higher e... [more]

This study utilizes life cycle analysis to compare three steel manufacturing off-gas utilization systems: a status quo system, which produces electricity via a low-pressure steam turbine; a combined cycle power plant (CCPP) system, which produces electricity using gas and steam turbines; and a methanol (MeOH) system, which converts coke oven gas (COG) and blast furnace gas (BFG) into MeOH (CBMeOH). This research seeks to compare the environmental impacts of each system based on equivalent raw material inputs. Since the systems have different products, system expansion is used to ensure that they have the same outputs and are therefore comparable. The system boundary consists of a combination of cradle-to-gate and gate-to-gate boundaries. The environmental effects of each system are compared at five locations—Ontario, the USA, Finland, Mexico, and China—using TRACI, CML-IA baseline, ReCiPe2016, and IMPACT2002+ in SimaPro v9. The results show that in Ontario, Finland, and China, CBMeOH s... [more]

Anaerobic digestion is a promising alternative to valorize agrifood wastes, which is gaining interest under an environmental sustainability overview. The present research aimed to compare anaerobic digestion with olive pomace oil extraction, by using life cycle assessment, as alternatives for the valorization of the olive mill solid waste generated in the centrifugation process with a two-outlet decanter from oil mills. In the case of olive pomace oil extraction, two cases were defined depending on the type of fuel used for drying the wet pomace before the extraction: natural gas or a fraction of the generated extracted pomace. The anaerobic digestion alternative consisted of the production of biogas from the olive mill solid waste, heat and electricity cogeneration by the combustion of the generated biogas, and composting of the anaerobic digestate. The life cycle assessment showed that anaerobic digestion was the best alternative, with a global environmental impact reduction of 88.1... [more]

Life Cycle Analysis (LCA) has long been utilized for decision making about the sustainability of products. LCA provides information about the total emissions generated for a given functional unit of a product, which is utilized by industries or consumers for comparing two products with regards to environmental performance. However, many existing LCAs utilize data that is representative of an average system with regards to life cycle stage, thus providing an aggregate picture. It has been shown that regional variation may lead to large variation in the environmental impacts of a product, specifically dealing with energy consumption, related emissions and resource consumptions. Hence, improving the reliability of LCA results for decision making with regards to environmental performance needs regional models to be incorporated for building a life cycle inventory that is representative of the origin of products from a certain region. In this work, we present the integration of regionalized... [more]

The life cycle human health (HH) impacts related to aviation biofuels have been understood in a limited way. Life cycle impact assessment (LCIA) methods for assessing HH are often associated with a high level of uncertainty and a low level of consensus. As a result, it remains challenging to perform a robust assessment of HH impacts with a suitable LCIA method. This study aims to systematically compare six commonly used LCIA methods for quantifying HH impacts, in order to empirically understand the potential impacts of aviation biofuel production on HH and how the results are affected by the choice of methods. Three aviation biofuel production pathways based on different feedstocks (sugarcane, eucalyptus, and macauba) were analyzed and compared to fossil aviation biofuels, on the basis of a functional unit of 1 MJ aviation fuel. The majority of the LCIA methods suggest that, in respect to midpoint impacts, macauba-based biofuel is associated with the lowest impacts and eucalyptus-based... [more]

In this study, a well-to-wheels life cycle assessment was conducted to determine the environmental impacts from disposing of petroleum coke by converting it into liquid fuel. Specifically, three processes for converting petroleum coke and natural gas to Fischer Tropsch diesel were investigated, both with and without carbon capture and sequestration (CCS). Impact categories were calculated using the EPA’s TRACI 2.1 US-Canada 2008 midpoint method in SimaPro software. In addition, the impact of grid emissions on the overall process was assessed using two representative Canadian locations with high (Alberta) and low (Ontario) grid emissions. The results of each impact category were compared among the designs and against conventional petroleum and oil-sands derived diesel. Key findings showed that the proposed designs when operated using CCS in the low-emissions-grid location had lower life cycle GHG emissions than conventional petroleum and oil-sands derived diesel. Nevertheless, the vario... [more]

This is a submission of source file of the life cycle analysis of steel manufacturing off-gas utilization systems using SimaPro V9. It includes five locations: Ontario, the USA, Finland, Mexico, and China.

Carbon emissions are inevitably linked to lifestyle and consumption behaviours, and the concept of “carbon footprinting” is now well-recognised beyond academia. Life cycle assessment (LCA) is one of the primary tools for assessing carbon footprints. The aim of this paper is to present a systematic review of literatures focusing on carbon footprint calculated with life cycle assessment. We used CiteSpace software to draw the knowledge map of related research to identify and trace the knowledge base and frontier terminology. It was found that the LCA application in respects of carbon footprint studies was completed mainly for the following aspect: beef production and dairy industry, seafood and fishery, nutrition, urban structure and energy use. The CiteSpace analysis showed the development path of the above aspects, for example, beef production and dairy industry has been a long-term topic in this kind of research, while the topic of nutrition appeared in recent years. There was also a... [more]

Six municipal solid waste management (MSWM) options (A1−A6) in Harare were developed and analyzed for their global warming, acidification, eutrophication and human health impact potentials using life cycle assessment methodology to determine the least impactful option in Harare. Study findings will aid the development of future MSWM systems in Harare. A1 and A2 considered the landfilling and incineration, respectively, of indiscriminately collected MSW with energy recovery and byproduct treatment. Source-separated biodegradables were anaerobically treated with the remaining non-biodegradable fraction being incinerated in A3 and landfilled in A4. A5 and A6 had the same processes as in A3 and A4, respectively, except the inclusion of the recovery of 20% of the recoverable materials. The life cycle stages considered were collection and transportation, materials recovery, anaerobic digestion, landfilling and incineration. A5 emerged as the best option. Materials recovery contributed to imp... [more]

The petroleum coke gasification integrated gasification combined cycle power plant (petcoke-IGCC) is a promising avenue for disposal of the ever-growing amount of stockpiled petroleum coke. In this work, we present a novel techno-economic and life cycle assessment of the process operated with carbon capture and sequestration. The proposed petcoke-to-electricity plant is designed and simulated in Aspen Plus v10. The proposed power plant was compared against coal integrated gasification combined cycle (coal-IGCC) and supercritical pulverized coal power plants operated with carbon capture and sequestration. The results showed that although the efficiency of the coal-IGCC plant is higher than the petcoke-IGCC plant, the higher energy density of the petcoke and lower resource costs were such that the levelized cost of electricity of petcoke-IGCC was lower than coal-IGCC. Furthermore, the feed flow rate of petcoke to the petcoke-IGCC process is approximately 15% lower than the coal feed rate... [more]

This presentation makes the case for the development of a new ISO standard for conduction eco-technoeconomic analyses (eTEAs) within the field of energy systems engineering and chemical process systems engineering. The talk provides a motivating example of a recent study that showed how standardization of eTEAs made it possible to make fair comparisons between different types of power plants using carbon capture and sequestration by using eTEAs reported in the literature that have been converted to certain standards. That lead to informed decisions which were not possible without standardization methods, because it major variables are controlled such that analyses can focus on the value of the process concept itself rather than external factors like size, financing, and case-specific assumptions. Then, the talk outlines how the proposed ISO standards would work, their goals and scope, examples of standard practices, methods, and assumptions that could be used and what they might look l... [more]

This work investigates the environmental and economic performances of a membrane reactor for hydrogen production from raw biogas. Potential benefits of the innovative technology are compared against reference hydrogen production processes based on steam (or autothermal) reforming, water gas shift reactors and a pressure swing adsorption unit. Both biogas produced by landfill and anaerobic digestion are considered to evaluate the impact of biogas composition. Starting from the thermodynamic results, the environmental analysis is carried out using environmental Life cycle assessment (LCA). Results show that the adoption of the membrane reactor increases the system efficiency by more than 20 percentage points with respect to the reference cases. LCA analysis shows that the innovative BIONICO system performs better than reference systems when biogas becomes a limiting factor for hydrogen production to satisfy market demand, as a higher biogas conversion efficiency can potentially substitut... [more]

With the rapid increase in production of lithium-ion batteries (LIBs) and environmental issues arising around the world, cathode materials, as the key component of all LIBs, especially need to be environmentally sustainable. However, a variety of life cycle assessment (LCA) methods increase the difficulty of environmental sustainability assessment. Three authoritative LCAs, IMPACT 2002+, Eco-indicator 99(EI-99), and ReCiPe, are used to assess three traditional marketization cathode materials, compared with a new cathode model, FeF₃(H₂O)₃/C. They all show that four cathode models are ranked by a descending sequence of environmental sustainable potential: FeF₃(H₂O)₃/C, LiFe0.98Mn0.02PO₄/C, LiFePO₄/C, and LiCoO₂/C in total values. Human health is a common issue regarding these four cathode materials. Lithium is the main contributor to the environmental impact of the latter three cathode materials. At the midpoint level in different LCAs, the toxicity and land issues for LiCoO₂/C, the non-... [more]

One of the largest engineering challenges of our time is finding technical solutions that permit the use of our energy resources in a sustainable way. In order to achieve meaningful and positive change, new energy systems must adhere to the triple bottom line of sustainability. This means that new technical solutions must be economically, socio-politically, and environmentally sustainable, such that they can be rapidly adopted and accepted. The engineering literature is full of a great many technical proposals for new energy systems, but it turns out to be quite hard to objectively look at them all, see through the hype, and decide which are the best and most promising technologies in which to invest our research and development dollars. In this talk, I will present a case study with the results of our recent meta-study covering over 100 candidate electricity generation systems with carbon dioxide capture, in order to determine which are the most promising classes of technologies. I wi... [more]

In this paper, the environmental and economic impacts of the life cycle of an advanced lithium based energy storage system (ESS) for a battery electric vehicle are assessed. The methodology followed to perform the study is a Multiregional Input⁻Output (MRIO) analysis, with a world IO table that combines detailed information on national production activities and international trade data for 40 countries and a region called Rest of the World. The life cycle stages considered in the study are manufacturing, use and recycling. The functional unit is one ESS with a 150,000 km lifetime. The results of the MRIO analysis show the stimulation that the life cycle of the EES has in the economy, in terms of production of goods and services. The manufacturing is the life cycle stage with the highest environmental load for all the impact categories assessed. The geographical resolution of the results show the relevance that some countries may have in the environmental performance of the assessed pro... [more]

The construction of two marine bulk terminals in the Pacific Northwest region of the United States are currently under review and would open up additional thermal coal exports to Asia on the order of almost 100 million additional tonnes per year. The major exporters of coal to Asian markets include Indonesia and Australia. This life cycle analysis (LCA) seeks to understand the role of transportation and mining in the cradle-to-busbar environmental impacts of coal exports from the Powder River Basin (PRB) to Asian countries, when compared to the competitor countries. This LCA shows that: (1) the most significant greenhouse gas (GHG) impacts in the cradle-to-busbar life cycle of coal for power generation come from the combustion of coal in a power plant, even when 90% carbon capture is applied; (2) for non-GHG air impacts, power plant combustion impacts are less dominant and variations in upstream impacts (mining and transportation) are more important; and (3) when comparing impacts betw... [more]

The combustion of fossil fuels in the transport sector leads to an aggravation of the air quality along city roads and highways. Urban air quality is a serious problem nowadays as the number of vehicles increases on a yearly basis. With stricter Euro emission regulations, vehicle manufacturers are not meeting the imposed limits and are also disregarding the non-exhaust emissions. This paper highlights the relevance of non-exhaust emissions of passenger vehicles, both conventional (diesel and petrol) or electric vehicles (EV), on air quality levels in an urban environment in Belgium. An environmental life cycle assessment was carried out based on a real-world emission model for passenger cars and fuel refinery data. A cut-off was applied to the models to highlight what emissions, both from the refinery to the exhaust and electricity production for EV, do actually occur within Belgium’s borders. Results show that not much progress has been made from Euro 4 to 6 for conventional vehicles.... [more]

Turkey’s electricity mix is dominated by fossil fuels, but the country has ambitious future targets for renewable and nuclear energy. At present, environmental impacts of electricity generation in Turkey are unknown so this paper represents a first attempt to fill this knowledge gap. Taking a life cycle approach, the study considers eleven impacts from electricity generation over the period 1990⁻2014. All 516 power plants currently operational in Turkey are assessed: lignite, hard coal, natural gas, hydro, onshore wind and geothermal. The results show that the annual impacts from electricity have been going up steadily over the period, increasing by 2⁻9 times, with the global warming potential being higher by a factor of five. This is due to a four-fold increase in electricity demand and a growing share of fossil fuels. The impact trends per unit of electricity generated differ from those for the annual impacts, with only four impacts being higher today than in 1990, including the glob... [more]

A life cycle assessment (LCA) methodology was used to evaluate the cumulative energy demand and the related environmental impact of three large-power stand-alone photovoltaic (PV) irrigation systems ranging from 40 kWp to 360 kWp. The novelty of this analysis is the large power of these systems as the literature up to now is restricted to modeled PV pumping systems scenarios or small power plants, where the size can be a critical factor for energy and environmental issues. The analysis shows that the yearly embodied energy per unit of PV power ranged from 1306 MJ/kWp to 1199 MJ/kWp depending of the PV generator size. Similarly, the related yearly carbon dioxide impacts ranged from 72.6 to 79.8 kg CO₂e/kWp. The production of PV modules accounted for the main portion (about 80%) of the primary energy embodied into the PV irrigation system (PVIS). The outcomes of the study also show an inverse trend of the energy and carbon payback times respect to the PV power size: In fact, energy payba... [more]