The electricity market in Brazil is basically organized under two parts: the regulated market, where energy is traded through auctions, and the free market, where market participants freely negotiate the price and quantity of electricity. Although revenues obtained in the regulated market tend to be lower than in the free market, the auctions’ results show that investors still value the lesser degree of uncertainty associated with the regulated market. However, a growing interest in the free market by investors is recognized since the price of electricity tends to be higher. Therefore, this study investigates four free market price scenarios to assess the expected return for investors, using the traditional discounted cash flow approach complemented with Monte Carlo simulation to address market uncertainty. The study breaks new ground by capturing the weekly price fluctuations and including the price elasticity of demand of the free market. The results seem to indicate that the disclos... [more]

State-mandated renewable portfolio standards affect substantial portions of the total U.S. electricity supply. Renewable portfolio standards are environmentally motivated policies, yet they have the potential to greatly impact economy. There is not an agreement in the literature on the impact of renewable portfolio standards policies on regional economies, especially on job creation. By integrating various methodologies including econometrics, geographic information system, and input−output analysis into a unique system dynamics model, this paper estimates the economic and environmental impacts of various renewable portfolio standards scenarios in the state of New Mexico, located in Southwestern U.S. The state is endowed with traditional fossil fuel resources and substantial renewable energy potential. In this work we estimated and compared the economic and environmental tradeoffs at the county level under three renewable portfolio standards: New Mexico’s original standard of 20% renew... [more]

Sustainable development can be achieved when economic development does not produce environmental deterioration. In this context, the aim of the paper is to evaluate the effects of economic development on GHG emissions in the Baltic States (Latvia, Letonia, and Lithuania), and in Hungary, the Czech Republic, Slovakia, and Poland (the Visegrád Group or V4 countries) in the period of 1996−2019. The study introduces dynamic ARDL panels in the context of the traditional environmental Kuznets curve (EKC) and renewable Kuznets curve (RKC). The results indicated an inverse-N-shaped and a U-shaped pattern. Energy consumption and labour productivity enhanced pollution, while domestic credit to the private sector, as a share of GDP, and renewable energy consumption supported environmental protection. The implications of these results might help these countries to achieve the targets of the European Green Deal related to the reduction of pollution and the attainment of net zero emissions by 2050.... [more]

LCA analysis with 16 impact categories was used for the comparison of two developed combustion technologies: Scenario I—the combustion of meat bone meal produced from all types of meat waste; Scenario II—the combustion of meat bones from the production of meat products. The key hotspots determined were electricity and natural gas consumption, covering as much as 98.2% of the total influence on the environment in Scenario I and 99.3% in Scenario II. Without taking into account the environmental burdens avoided, the LCA analysis showed that Scenario I was assessed to have 71.2% less environmental impact. The avoided burdens approach changed the relationship between the two scenarios. The absolute value score for the overall environmental impact shows that Scenario II can be more environmentally beneficial than Scenario I; however, Scenario I allowed the elimination of all types of Polish meat waste, and Scenario II could only be carried out in meat production units for the elimination of... [more]

For decades, among other industries, the construction sector has accounted for high energy consumption and emissions. As the energy crisis and climate change have become a growing concern, mitigating energy usage is a significant issue. The operational and end of life phases are all included in the building life cycle stages. Although the operation stage accounts for more energy consumption with higher carbon emissions, the embodied stage occurs in a time-intensive manner. In this paper, an attempt has been made to review the existing methods, aiming to lower the consumption of energy and carbon emission in the construction buildings through optimizing the construction processes, especially with the lean construction approach. First, the energy consumption and emissions for primary construction materials and processes are introduced. It is followed by a review of the structural optimization and lean techniques that seek to improve the construction processes. Then, the influence of thes... [more]

China recently implemented a “Green Mine” policy focused on promoting the filling method, aiming to mitigate the environmental impacts of underground mining; nevertheless, quantitative inventories have rarely been provided to support or negate such promotion, especially from a life-cycle perspective. Accordingly, this paper proposes a bottom-up model for estimating life-cycle greenhouse gas (GHG) emissions from underground metal mines using either filling or caving methods. Two filling-based (Luohe and Longtangyan) and two caving-based (Maogong and Xiaowanggou) iron mines were studied; their direct GHG emissions were 0.576, 0.278, 2.130, and 1.425 tons of carbon dioxide equivalent per kiloton-extracted ore (t CO2 eq/kt), respectively. When indirect GHG emissions were considered, the results increased to 17.386, 15.211, 5.554, and 5.602 t CO2 eq/kt, respectively. In contrast to popular belief, such results demonstrate that promoting the filling method can potentially raise the overall G... [more]

Although the technologies involved in converting saline gradient energy (SGE) are rapidly developing, few studies have focused on evaluating possible environmental impacts. In this work, the environmental impacts of a hypothetical 50 kW RED plant installed in La Carbonera Lagoon, Yucatan, Mexico, are addressed. The theoretical support was taken from a literature review and analysis of the components involved in the pressure retarded osmosis (PRO) and reverse electrodialysis (RED) technologies. The study was performed under a three-stage scheme (construction, operation, and dismantling) for which the stress-inducing factors that can drive changes in environmental elements (receptors) were determined. In turn, the possible modifications to the dynamics of the ecosystem (responses) were assessed. Since it is a small-scale energy plant, only local impacts are expected. This study shows that a well-designed SGE plant can have a low environmental impact and also be of benefit to local ecotou... [more]

This article presents the research on the analysis of the impact of social isolation caused by the COVID-19 pandemic on gaseous air pollutant concentrations. For this purpose, the authors presented (thermal maps) and analyzed the concentrations of selected gases such as NO2, CO, SO2, and PM2.5 particles during the strict quarantine period in Poland and other EU countries. Statistical analysis of the concentration level of these gases was performed. It was noticed that in Poland, Germany, and France, the concentrations of such gases as CO, NO2, and PM2.5 particles decreased, while in Italy and Spain, the tendency was the opposite. To verify whether the discovered dependencies are not a natural continuation of the trends shaping the given phenomenon, the time series of gas and PM2.5 particle emissions were analyzed. On this basis, the emission forecast up to 2023 was created, using the ARIMA class models. The obtained results allowed to construct five scenarios for the development of NO2... [more]

Deteriorating air quality is one of the most important environmental factors posing significant health risks to urban dwellers. Therefore, an exploration of the factors influencing air pollution and the formulation of targeted policies to address this issue are critically needed. Although many studies have used semi-parametric geographically weighted regression and geographically weighted regression to study the spatial heterogeneity characteristics of influencing factors of PM2.5 concentration change, due to the fixed bandwidth of these methods and other reasons, those studies still lack the ability to describe and explain cross-scale dynamics. The multi-scale geographically weighted regression (MGWR) method allows different variables to have different bandwidths, which can produce more realistic and useful spatial process models. By applying the MGWR method, this study investigated the spatial heterogeneity and spatial scales of impact of factors influencing PM2.5 concentrations in m... [more]

In the face of contemporary ecological problems, including the influence of transport and mobility on the greenhouse effect, policy makers see a solution in the technology of electric vehicles (EVs). This innovation has appeared in the automotive market around the world. In this article, Rogers’ innovation diffusion concept was used to determine if and when EVs could replace combustion engine vehicles. The aim of the article is to analyze the current situation of innovative electric vehicle (EV) technology on the European Union (EU) market and the potential and possible directions of its market diffusion. As a result of the analysis of the current situation of the EU automotive markets, three groups of countries with different market conditions regarding the development of EV technology were distinguished. The classification was carried out using the K-means clustering algorithm, based on the current level of innovation and the level of development of the LPG-(Liquefied Petroleum Gas)... [more]

The issue of environmental management systems in food processing companies is gaining importance due to the need to reduce water withdrawal, wastewater, air emissions, and waste generation. New technological solutions and innovations can reduce the negative effects of the enterprises’ production facilities on the environment. In Poland, the phenomenon of increasing use of the amount of renewable energy sources is influenced by, e.g., adopted national and EU legislation, development of new technologies in the field of energy, and increasing awareness of producers and consumers in the field of ecology and environmental protection. It is also important that the state creates favorable conditions for the use of renewable energy in micro-installations. The application goal of the study is to develop a procedure for improvement of the environmental management systems for food processing companies and increase the awareness of potential use and implementation of renewable energy sources by fo... [more]

The future of the energy sector depends on the younger generation. The paper presents the results of the study, the aim of which was to determine to what extent younger generation is pro-ecological and pro-social, and whether they will include pro-ecological and pro-social activities in the management of energy companies. It is especially important to implement sustainable management in the energy sector. The study found that only 33.9% of young people are highly pro-ecological and 28.6% highly pro-social. As many as 83.0% of the younger generation show low and medium interest in environmental protection. Declarations of young people concerning high degree of inclusion of pro-ecological and pro-social activities in management are at the level of 49.9% and 58.1%. However, in many cases, these intentions do not coincide with the high pro-ecological and pro-social attitude of young people. This means that their future activity for sustainable management may be low. According to the survey... [more]

Covalent organic frameworks comprise a unique class of functional materials that has recently emerged as a versatile tool for energy-related, photocatalytic, environmental, and electrochromic device applications. A plethora of structures can be designed and implemented through a careful selection of ligands and functional units. On the other hand, porous materials for heavy metal absorption are constantly on the forefront of materials science due to the significant health issues that arise from the release of the latter to aquatic environments. In this critical review, we provide insights on the correlation between the structure of functional covalent organic frameworks and their heavy metal absorption. The elements we selected were Pb, Hg, Cr, Cd, and As metal ions, as well as radioactive elements, and we focused on their removal with functional networks. Finally, we outline their advantages and disadvantages compared to other competitive systems such as zeolites and metal organic fra... [more]

The building sector is responsible for 43% of France’s final energy consumption and is strongly associated with a high environmental impact due to its high consumption of energy and natural resources. These impacts are significant in isolated islands. Due to its geographical isolation and an area of 2512 km2, Reunion Island has a heavily carbon-based economy with a high import rate of raw materials for the building sector. This study aimed to investigate the effect of electricity mix decarbonization on residential house environmental impact. The methodology consists of three parts: (i) evaluating environmental impacts of Single-Family Houses (SFH) using life cyce assessment(LCA), (ii) defining SFH typologies using the K-means clustering algorithm, and (iii) implementing energy scenario in LCA of SFH to assess decarbonization effect. The environmental results were particularly sensitive in the operational phase, with a decrease of 83% between 2020 to 2040 of the global warming potential... [more]

Economic growth, urbanization, and financial market development (FMD) may increase energy demand in any economy. Non-renewable sources of energy consumption, i.e., oil consumption and natural gas consumption (NGC), could have environmental consequences. We examine the effects of economic growth, urbanization, and FMD on the oil consumption and NGC in Middle East countries using the period 1975−2019. In the panel results, we found a positive effect of income and a negative effect of income-squared on oil and natural gas consumption. Hence, we corroborate the existence of the environmental Kuznets curve (EKC) hypothesis in oil and natural gas consumption models of the Middle East region. Urbanization has a positive effect on oil and natural gas consumption. FMD has a positive effect on oil consumption and has a negative effect on NGC. From the long-run, country-specific results, we validate the existence of the EKC hypothesis in the oil consumption models of Iran and Iraq. The EKC is als... [more]

The article deals with the problem of adaptation of the Russian oil and gas company (Novatek, Russia) to the rapidly changing external environment, the avalanche of data from competitors, and the need to filter important information for business development and the prosperity of the industry as a whole. The approach is based on the system of integrated software monitoring of key business processes at the enterprise developed by the authors—from the formation of the idea of a new product to its implementation to paying customers. The scientific novelty lies in the use of an optimization model that allows for minimizing the maximum losses of the investor at all levels of decision-making, from the distribution of capital between companies, to the optimization of internal reserves to increase the competitiveness of the company. The toolkit is a minimax model that allows you to redistribute the shares of investor influence at the portfolio level, and then within the business processes of ea... [more]

This paper examines the environmental Kuznets curve (EKC) in Vietnam between 1977 and 2019. Using the autoregressive distributed lag (ARDL) approach, we find an inverted N-shaped relation between economic growth and carbon dioxide emissions in both the long- and short-run. The econometric results also reveal that energy consumption and urbanization statistically positively impact pollution. The long-run Granger causality test shows a unidirectional causality from energy consumption and economic growth to pollution while there is no causal relationship between energy consumption and economic growth. These suggest some crucial policies for curtailing emissions without harming economic development. In the second step, we also employed the back-propagation neural networks (BPN) to compare the work of econometrics in carbon dioxide emissions forecasting. A 5-4-1 multi-layer perceptron with BPN and learning rate was set at 0.1, which outperforms the ARDL’s outputs. Our findings suggest the p... [more]

Photovoltaic systems represent a leading part of the market in the renewable energies sector. Contemporary technology offers possibilities to improve systems converting sun energy, especially for the efficiency of modules. The paper focuses on current concentrated photovoltaic (CPV) technologies, presenting data for solar cells and modules working under lab conditions as well as in a real environment. In this paper, we consider up-to-date solutions for two types of concentrating photovoltaic systems: high-concentration photovoltaics (HCPV) and low-concentration photovoltaics (LCPV). The current status of CPV solar modules was complemented by the preliminary results of new hybrid photovoltaic technology achieving records in efficiency. Compared to traditional Si-PV panels, CPV modules achieve greater conversion efficiency as a result of the concentrator optics applied. Specific CPV technologies were described in terms of efficiency, new approaches of a multijunction solar cell, a tracki... [more]

As the complexity of automated driving systemss (ADSs) with automation levels above level 3 is rising, virtual testing for such systems is inevitable and necessary. The complexity of testing these levels lies in the modeling and calculation demands for the virtual environment, which consists of roads, traffic, static and dynamic objects, as well as the modeling of the car itself. An essential part of the safety and performance analysis of ADSs is the modeling and consideration of dynamic road traffic participants. There are multiple forms of traffic flow simulation software (TFSS), which are used to reproduce realistic traffic behavior and are integrated directly or over interfaces with vehicle simulation software environments. In this paper we focus on the TFSS from PTV Vissim in a co-simulation framework which combines Vissim and CarMaker. As it is a commonly used software in industry and research, it also provides complex driver models and interfaces to manipulate and develop custom... [more]

An environmental life cycle assessment was conducted to compare proposed municipal solid waste treatment systems with the existing system in Visakhapatnam, India. Five waste alternative treatment systems, including open dumping of municipal solid waste (S1), landfill without gas recovery [LFWGR] (S2), landfill with gas recovery (S3), anaerobic digestion + LFWGR (S4), and incineration + LFWGR (S5). EASETECHTM was considered for assessment using ReCiPE Midpoint (Heuristic) world environmental impact assessment method. Global warming potential (GWP), terrestrial acidification (TA), freshwater eutrophication (FEW), marine water eutrophication (ME), human toxicity (HTP), terrestrial ecotoxicity (TE), freshwater ecotoxicity (FWT), and marine ecotoxicity (MET) impacts were determined for each option. The existing MSW disposal practice in Visakhapatnam city (baseline scenario, S1) has the highest GWP (1107 kg CO2 eq.), which can potentially be reduced to 68.2%, 81.5%, 98.2%, and 94.5% by alter... [more]

Access to safe drinking water is essential to good health, a basic human right, and a component of effective policy for health protection. Improving the quality of local public water and waste services is one of the United Nations Sustainable Development Goals (Goal 6: Clean Water and Sanitation). This study aims to know the degree of satisfaction of domestic users who receive services related to water and waste in municipalities with less than 20,000 inhabitants in the province of Badajoz (Spain). We carry out this research because the perception of municipal services provided by the public administration is usually negative and deficient. The case study PROMEDIO, the consortium formula, is described as a successful partnership to improve the quality of local public water and waste services. For this purpose, a detailed analysis of the different aspects involved in the relationship between the users and the services provided is carried out. The consortium was found to increase citizen... [more]

In this study, we assumed that 28 European countries (Decision Making Units (DMUs)) aimed to accomplish higher economic outputs, using fewer resources and producing fewer emissions in the form of environmental degradation. In this context, we studied the drivers of total factor productivity change (TFPCH) in DMUs, associated with either managerial capabilities (efficiency change (EC)) or innovations (technical change (TC)) in resource-saving production methods, before and after the integration of CO2 (carbon dioxide) emissions as an additional variable (undesirable output) in the initial model of one output (gross domestic product (GDP)) and five inputs (labor, capital, energy, domestic material consumption and recycled municipal waste). The primary focus of this study is to identify best practices that policymakers can adopt as they attempt to reduce productivity loss. Our results highlight the weak areas of individual countries and seem to indicate the action that should be taken to... [more]

Given the effects of steep dips and large lateral variations in seismic velocity beneath the Vancouver Island continental shelf, seismic processing and travel time inversion are inadequate to obtain a detailed velocity model of the subsurface. Therefore, seismic full waveform inversion is applied to multichannel seismic reflection data to obtain a high-resolution velocity model beneath the Tofino fore-arc basin under the continental shelf off Vancouver Island margin. Seismic velocities obtained in this study help in understanding the shallow shelf sediment structures, as well as the deeper structures associated with accreted terranes, such as Pacific Rim and Crescent terranes. Shallow high velocities, as large as ∼5 km/s, were modeled in the mid-shelf region at ∼1.5−2.0 km depth. These coincide with an anticlinal structure in the seismic data, and possibly indicate the shallowest occurrence of the volcanic Crescent terrane. In general, seismic velocities increase landward, indicating s... [more]

The environmental footprint (EF) indicator has emerged as a tool to measure human demand for productive land and water and it is used for the evaluation of the impact of products or economic activities on the environment. There are many indicators that are used in the decision making for the investment in the power sector, however, predominant are the economic indicators which underestimate the depreciation of natural capital (environment) and the value added generated by the public services. Many research studies have been carried out in an attempt to demonstrate the versatility of the EF by extending its applicability not only to environmental assessment, but also to use it, among other economic indicators, when assessing sustainable investment. Sustainable investment (SI) combines fundamental analysis and engagement with an evaluation of environmental, social and corporate governance (ESG) factors. The purpose of this article is, upon evaluating the EF, to identify the opportunities... [more]

This article describes the effect of high-power electromagnetic environments (HPEMs) on the operation of all basic elements of electrical power networks. Frequency bands are defined for the HPEM environments. Attention is focused particularly on directed energy weapons (DEWs) and intentional electromagnetic interference (IEMI). A classification of DEW and IEMI generators in terms of E-field level and target distance from the DEW or IEMI generator antenna aperture is also described. The main focus of this article is on the design and testing of a low-tech DEW generator used to determine the electromagnetic immunity of standard electronic circuits. In addition, verification of electromagnetic immunity for a simple electronic circuit without adequate protection against the E-field is also explained. The outcome of this article is the determination of the E-field limits for fault-free operation, for malfunctioning states of the tested circuits and for irreversible destruction of the circui... [more]