Low-carbon development is one of the more significant problems of the Visegrad Group countries (Czech Republic, Poland, Slovakia, and Hungary). It is related, among others, to the improvement of life quality in economic terms while taking into account activities for environmental protection. The aim of the article is to identify and explain the problems connected with low-carbon development. The purpose of the analyses is also to prove the negative impact of the emission of greenhouse gas emission (GHG) and other harmful substances into the air on the quality of human life and the natural environment. During the research, an assessment of the eco-efficiency of the used energy resources and technologies that negatively affect the environment was carried out. Moreover, the paper also presents methods to use greener energy sources and analyses the potential of implementing solutions supporting low-carbon development. The study recommends actions that may contribute to the reduction of gre... [more]

Heat production from a geothermal energy source is gaining increasing attention due to its potential contribution to the decarbonization of the European energy sector. Obtaining representative results of the environmental performances of geothermal systems and comparing them with other renewables is of utmost importance in order to ensure an effective energy transition as targeted by Europe. This work presents the outputs of a Life Cycle Assessment (LCA) performed on the Rittershoffen geothermal heat plant applying guidelines that were developed within the H2020 GEOENVI project. The production of 1 kWhth from the Rittershoffen heat plant was compared to the heat produced from natural gas in Europe. Geothermal heat production performed better than the average heat production in climate change and resource use, fossil categories. The LCA identified the electricity consumption during the operation and maintenance phase as a hot spot for several impact categories. A prospective scenario an... [more]

Urban soils are the most vulnerable component of the current terrestrial ecosystem. Due to the anthropogenic influence, various pollutants can accumulate in the soils and have a negative effect on the health of citizens. As a result of the degradation of permafrost landscapes, the disappearance of a number of natural ecosystems, as well as urban areas, is possible. In the course of the development of thermokarst processes, problems arise in the urban environment with the destruction of urban buildings and a decrease in agricultural areas. The ecosystem of Yakutsk city is located in the valley of the Lena River and represents the largest urbanized terrestrial biotope, located in the permafrost-affected bioclimatic and geogenic conditions. This work represents relevant datasets on the physico-chemical, toxicological and agrochemical state of soil cover components in various functional zones of the city. An 3excess of the maximum threshold levels for Zn was noted in the area of active min... [more]

This study determined the influence of precipitation occurring in the sewerage catchment basin in Nowy Targ (Poland) on the amount of wastewater inflow to the wastewater treatment plant, and determined the costs resulting from the treatment of accidental (rain) water entering the analyzed sewerage system. The research was conducted from 2016 to 2019, for which daily precipitation and average daily wastewater inflows in the so-called dry, normal, and very wet periods were analyzed. The research period was divided into six characteristic intervals in terms of precipitation. It was found that, on days with different precipitation intensity, the amount of accidental water as a proportion of the total amount of wastewater flowing into the plant ranges from 9.6% to 34.1%. The annual costs incurred by the operator resulting from the environmental fee are 1625.8 EUR/year. Alternatively, the costs resulting from financial expenditures for wastewater treatment processes amount to 337,651 EUR/yea... [more]

The construction sector is one of the most energy-intensive in the industrialized countries. In order to limit climate change emissions throughout the entire life cycle of a building, in addition to reducing energy consumption in the operational phase, attention should also be paid to the embodied energy and CO2 emissions of the building itself. The purpose of this work is to review data on embodied energy and GWP derived from EPDs of different types of windows, to identify the LCA phases, the most impacting materials and processes from an environmental point of view and to perform a critical analysis of the outcomes. The results show a strong dependence on the typology of the frame, with wooden windows having competitive performances: lower average primary energy non-renewable (1123 MJ/FU), higher average primary energy renewable (respectively 817 MJ/FU) and lower global warming potential (54 kgCO2eq/FU). More transparency and standardization in the information conveyed by the program... [more]

The cultivation of short rotation coppice (SRC) is a sustainable and ecological alternative for the production of energy vectors today. For its use, it is necessary to know the thermochemical properties of the biomass produced, as well as the differences between genotypes and varieties. In this work, the thermochemical properties of five different Populus clones grow up in Mediterranean basin, with two different age categories, are analyzed. The moisture content, wood density, heating value, ash content, energy density, composition and the volatile matter were measured, separating wood and crust fractions. The mean crust content for all clones was near to 10% but it is observed that the youngest clones have higher content of crust and humidity. The 3 year-old clones generally show lower humidity and ash content and higher density of wood and fixed carbon, consequently showing a higher heating value. In addition, 3 year-old clones are encouraged since they have a lower content of majori... [more]

The paper will examine, in detail, (a) the norms that can be featured under the category “Green Deal” connected to the European Commission, (b) their application to Spain, and (c) the different patterns of action and development models that have been shaped by this framework over the last 20 years. These patterns are particularly relevant currently, as the COVID-19 crisis has highlighted the importance of advancing towards new patterns of local sustainability endowed with higher resilience. The notion of cognitive sustainability will be one of the added values to the current reflections on sustainability in general, and energetic sustainability in particular.

The consumption of renewable energy has become a substitute for fossil fuels to mitigate environmental degradation. However, this substitution of energy raises many questions regarding its possible impact on economic growth. In this context, this research aims to examine the long-term relationship between economic growth and financial development, non-renewable energy, renewable energy, and human capital in 16 Latin American countries. Panel data techniques during the period 1988−2018 and statistical information compiled by the World Bank and Penn Word Table databases were used. Second-generation econometric techniques (cross-sectionally augmented Dickey−Fuller (CADF) and cross-sectionally augmented IPS (CIPS) were used in the work methodology, which allow the presence of cross-sectional dependence between sections to be controlled. The main results indicate that there is a long-term equilibrium relationship between financial development, non-renewable energy consumption, renewable ene... [more]

The article presents results of the research on the use of chars produced during pyrolysis of residual biomass as a substitutional fuel in the iron ore sintering process. Such an approach allows to implement circular economy and industrial symbiosis to the iron and steel branches. The effect of the substitution of conventional coke breeze fuel used in sintering on final sinter quality and emission was examined. With regard to productivity, fuel consumption, and properties of the sinter it was shown that the share of tested biochars in fuel may be kept at 10, and up to 30 wt.%, depending on the biochar type. It was observed that with the use of the biochars, the content of iron oxide in the sinter decreased, which was advantageous. Moreover, the sinter obtained in the presence of biochars was characterized with better strength and abrasion than the sinter obtained with coke breeze-based fuel, improving the final product quality. The presence of biochar influenced the raw exhaust gas com... [more]

Life cycle assessment is an environmental method which estimates either a process or a building material within the cradle-to-grave cycle. Presently, it is one of a few tools that include all factors which may influence the environment. The authors used this tool to prove effects connected with potential efficient energy levels and a reduction in CO2 emissions within a building’s life cycle. For the purpose of our analyses, several types of single-family building were chosen and they were subjected to analysis in the fixed location of Warsaw. The research scope included a numerical analysis of the buildings concerning the level of embodied energies and the emission of greenhouse gases. The performed analysis proved that, within a 50-year cycle, the difference between the embodied energy from the best and worst building choices can amount to 14.87%, whereas a reduction in embodied carbon emissions can reach 20.65%. Each change in the building’s form and the type of building materials us... [more]

The assessment of life cycle greenhouse gas emissions of motor fuels is important due to the legal obligations and corporate social responsibility of the petroleum industry. Combining the Life-Cycle Assessment with optimization methods can provide valuable support in the decision-making process. In this paper, a mathematical model of a refinery was developed to analyze the impact of process optimization on GHG emissions at the fuel production stage. The model included ten major refinery units. Fuel production costs were minimized by taking into account the number of constraints. The analysis was performed in two steps. First, the model was run for the reference case of fuels composition. Then, more than twelve thousand model runs were performed. In each model, the fuel composition was changed. This change represented the exogenous pressures and resulted in different flows of mass, energy and GHG emission at the refinery. The most favorable results in terms of GHG emissions were then id... [more]

Typhoons and other natural disasters affect the normal operation of power systems thus it is an important goal for strong and intelligent power grid construction to improve the ability of power systems to resist typhoons and other natural disasters. Especially, an effective coordinated and optimized dispatching strategy for a multi-source power system is greatly helpful to cope with the impact of typhoons and other natural disasters on power system operation. Given this background, a typhoon wind circle model considering the temporal and spatial distribution of typhoons is established to obtain the input wind speed of the wind farm at first. Second, based on the initial input wind speed of wind farms, a typical scenario set of wind power output is constructed to reflect its fluctuation and uncertainty. Next, an optimal coordinated dispatching model of a multi-source power system with wind, hydro and thermal power based on the conditional value at risk (CVaR) is established with the tar... [more]

The water−energy−food nexus has captured the attention of many researchers and policy makers for the potential synergies between those sectors, including the development of self-sustainable solutions for agriculture systems. This paper poses a novel design approach aimed at balancing the trade-off between the computational burden and accuracy of the results. The method is based on the combination of static energy hub models of the system components and rule-based control to simulate the operational costs over a one-year period as well as a global optimization algorithm that provides, from those results, a design that maximizes the solar energy contribution. The presented real-world case study is based on an isolated greenhouse, whose water needs are met due to a desalination facility, both acting as heat consumers, as well as a solar thermal field and a biomass boiler that cover the demand. Considering the Almerian climate and 1 ha of tomato crops with two growing seasons, the optimal... [more]

The use of energy is a precondition for global economic and civilisational development. However, the growing demand for energy is depleting traditional energy resources and, most importantly, causing environmental pollution, mainly through the emission of greenhouse gases. As energy is necessary for the functioning of all sectors of the economy, such as industry, services, transport as well as households, these sectors are the largest contributors to energy consumption. Renewable energy sources are an alternative to generating energy from conventional fossil fuels. The main objective of this paper was to determine and compare the level, trends and variation in energy consumption by different economic sectors in countries of the European Union in 2010−2019. An analysis of the share of renewable energy consumption in different economic sectors was also carried out, as well as an assessment of the relationship of these indicators with the level of economic development of the countries and... [more]

In the case of public buildings with ceiling heating and mechanical ventilation, radiant temperature asymmetry caused by the warm ceiling and draught occur simultaneously. The currently available literature does not offer an exhaustive description of the comfort conditions resulting from such a thermal environment. This research focuses on complementing the available knowledge, using instrumental measurements, as well as subject measurements carried out on 20 individuals. Relying on these measurements, the purpose of the research is to support the understanding of the combined mechanisms of action of the two local discomfort parameters. The main result of this research is that, if the predicted percentage dissatified is less than 6%, the radiant temperature asymmetry is in an interval of 5−15 °C, and the draught rate is 15% or 25%, the actual mean vote and the predicted mean vote values differ significantly, and the actual mean vote is always lower, with a few exceptions. In addition,... [more]

Underground mining engineers and planners in our country are faced with extremely difficult working conditions and a continuous shortage of money. Production disruptions are frequent and can sometimes last more than a week. During this time, gate road support is additionally exposed to rock stress and the result is its progressive deformation and the loss of functionality of gate roads. In such an environment, it is necessary to develop a low-cost methodology to maintain a gate road support system. For this purpose, we have developed a model consisting of two main phases. The first phase is related to support deformation monitoring, while the second phase is related to data analysis. To record support deformations over a defined time horizon we use laser scanning technology together with multivariate singular spectrum analysis to conduct data processing and forecasting. Fuzzy time series is applied to classify the intensity of displacements into several independent groups (clusters).

In recent decades, there has been a positive trend in world politics in the field of promoting territories’ sustainable development. At the same time, one of the most relevant areas is to promote the transition to renewable energy sources (RES), which correspond to one of the UN’s goals—Sustainable Development Goal 7 (SDG 7) “Ensuring universal access to affordable, reliable, sustainable and modern energy sources for all”. This article is devoted to the study of the renewable energy sources’ impact on the sustainable development of the Russian Arctic zone. The authors chose the level of carbon dioxide (CO2) emissions as an indicator reflecting the impact of RES on sustainable development, since this factor is one of the main factors for assessing trends in the activities of countries aimed at achieving progress on most of the Sustainable Development Goals of territories. The hypothesis of the relationship between the use of renewable energy sources and the achievement of progress on th... [more]

When developing a sustainability plan in a complex and heavily urbanized territory, one of the most relevant options available is installing rooftop photovoltaic (PV) panels. Thus, it is essential to determine the amount of available surface and the potential impact of such installations on the energy and emission budget of the area. Instead of processing remotely sensed imagery, which is a long process and does not allow considering the buildings’ ownership, this study develops an approach based on a cluster analysis of the urban/morphological characteristics of the municipalities. Once a clear group diversification is obtained, the roof surface of the center of gravity of each cluster is extrapolated to all similar settlements. This, together with the information of local solar irradiation, allowed us to compute each cluster’s potential solar energy production and its capability to respond to the local energy demand, a key parameter to decide about the possibility of a local smart el... [more]

The importance of CO2 removal from the atmosphere has long been an essential topic due to climate change. In this paper, the authors aim to demonstrate the suitability of the underground reservoirs for CO2 storage based on their geological characteristics. The research addressed the potential of geological formations for fossil CO2 storage in the Baltic States to support the goal of achieving carbon neutrality in the region. The geological, technical, and economic feasibility for CO2 storage has been assessed in terms of carbon sequestration in geological structures and the legal framework for safe geological storage of fossil CO2. Results indicate that prospective structural traps in the Baltic States, with reasonable capacity for CO2 storage, occur only in Southwestern Latvia (onshore) and in the Baltic Sea (offshore), whilst other regions in the Baltics either do not meet basic geological requirements, or have no economically feasible capacity for CO2 storage. Based on the examinati... [more]

Fire and explosion accidents of oil-filled electrical transformers are leading to negative impacts, not only on the delivery of energy, but also on workplace health and safety as well as the surrounding environment. Such accidents are still being reported, regardless of applying the regular maintenance strategy in the power plants. The purpose of this paper is to integrate a sustainability perspective into the maintenance strategy. The problem addressed is: how can we approach the relevant cost-effective sustainable maintenance for oil-filled electrical transformers? For this purpose, an empirical study in a power plant in Kuwait was introduced. The first stage was to carry out a sustainability assessment using the ABCD procedure. In this procedure, gaps to approach sustainability were identified and actions prioritized to close these gaps were demonstrated. Applying this procedure yielded an early fault diagnosis (EFD) model for achieving cost-effective sustainable maintenance using a... [more]

The Longtan Formation of the Upper Permian in the Sichuan Basin has become a significant target for shale gas exploration in recent years. Multiple methods, including outcrop observations, thin sections, total organic matter content, X-ray diffraction and scanning electron microscopy were used to investigate the mineralogy, shale lithofacies assemblages and their relationships with the deposition environment. The mineral composition of the Longtan Formation has strong mineral heterogeneity. The TOC values of the Longtan Formation have a wide distribution range from 0.07% to 74.67% with an average value of 5.73%. Four types of shale lithofacies assemblages of the Longtan Formation could be distinguished, as clayey mudstone (CLS), carbonaceous shale (CAS), siliceous shale (SS) and mixed shale (MS) on the basis of mineral compositions. The TOC values of various types of shale lithofacies assemblages in the Longtan Formation varied widely. The shore swamp of the Longtan Formation is most i... [more]

Although the thermal mass of floors in buildings has been demonstrated to help shift cooling load, there is still a lack of information about how floor covering can influence the floor’s load shifting capability and buildings’ demand flexibility. To fill this gap, we estimated demand flexibility based on the daily peak cooling load reduction for different floor configurations and regions, using EnergyPlus simulations. As a demand response strategy, we used precooling and global temperature adjustment. The result demonstrated an adverse impact of floor covering on the building’s demand flexibility. Specifically, under the same demand response strategy, the daily peak cooling load reductions were up to 20−34% for a concrete floor whereas they were only 17−29% for a carpet-covered concrete floor. This is because floor covering hinders convective coupling between the concrete floor surface and the zone air and reduces radiative heat transfer between the concrete floor surface and the surro... [more]

Accurate reliability and residual life analysis is paramount during the designing of reliability requirements and rotation of power measuring equipment (PME). However, the sample dataset of failure is usually sparse and contains inevitable pollution data, which has an adverse effect on the reliability analysis. To tackle this issue, this paper first applies nonlinear regression to fuse the failure rate and environmental features of PME collected from various locations. Then, a novel binary hierarchical Bayesian probability method is proposed to model the failure trend and identify outliers, in which the outlier identification structure is embedded into hierarchical Bayesian. Integrating binary hierarchical Bayesian and the bagging method, a binary hierarchical Bayesian with bagging (BHBB) framework is further introduced to improve predictive performance in a small sample dataset by resampling. Last, the influence of typical environmental features, failure rate, and reliability are obta... [more]

The assessment of performance of water companies is essential for their regulation. In doing so, several variables and models can be employed. This study evaluates and compares the performance of a sample of English and Welsh water companies from the operational, environmental and eco-efficiency perspectives by applying the non-radial data envelopment analysis range adjusted measure model. This methodological approach allows integrating greenhouse gas emissions as undesirable output. The results indicated that the water industry performed well from an operational perspective. However, environmental inefficiency considerably exists which illustrates the difficulties of the water companies in reducing greenhouse gas emissions. The average eco-efficiency was 0.783 which means that while expanding water services, water companies could further reduce costs and carbon emissions by 11.7% on average. Other factors such as water treatment complexity and population density significantly affect w... [more]

Industrial environments are heterogeneous systems that create challenges of interoperability limiting the development of systems capable of working collaboratively from the point of view of machines and software. Additionally, environmental issues related to manufacturing systems have emerged during the last decades, related to sustainability problems faced in the world. Thus, the proposed work aims to present an interoperable solution based on events to reduce the complexity of integration, while creating energetic profiles for the machines to allow the optimization of their energy consumption. A publish/subscribe-based architecture is proposed, where the instantiation is based on Apache Kafka. The proposed solution was implemented in two robotic cells in the automotive industry, constituted by different hardware, which allowed testing the integration of different components. The energy consumption data was then sent to a Postgres database where a graphical interface allowed the opera... [more]