With the large-scale grid connection of renewable energy sources, the frequency stability problem of the power system has become increasingly prominent. At the same time, the development of cloud computing and its applications has attracted people’s attention to the high energy consumption characteristics of datacenters. Therefore, it was proposed to use the characteristics of the high power consumption and high flexibility of datacenters to respond to the demand response signal of the smart grid to maintain the stability of the power system. Specifically, this paper establishes a synthetic model that integrates multiple methods to precisely control and regulate the power consumption of the datacenter while minimizing the total adjustment cost. First, according to the overall characteristics of the datacenter, the power consumption models of servers and cooling systems were established. Secondly, by controlling the temperature, different kinds of energy storage devices, load characteri... [more]

The power quality of the Electrical Power System (EPS) is greatly affected by electrical harmonics. Hence, accurate and proper estimation of electrical harmonics is essential to design appropriate filters for mitigation of harmonics and their associated effects on the power quality of EPS. This paper presents a novel statistical (Least Square) and meta-heuristic (Grey wolf optimizer) based hybrid technique for accurate detection and estimation of electrical harmonics with minimum computational time. The non-linear part (phase and frequency) of harmonics is estimated using GWO, while the linear part (amplitude) is estimated using the LS method. Furthermore, harmonics having transients are also estimated using proposed harmonic estimators. The effectiveness of the proposed harmonic estimator is evaluated using various case studies. Comparing the proposed approach with other harmonic estimation techniques demonstrates that it has a minimum mean square error with less complexity and better... [more]

In the rapidly growing economies of Southeast Asia, energy consumption and energy costs in buildings continue to increase. Over the past decade, energy consumption from the commercial building sector in Thailand has increased at an average of 4% per annum and currently represents over 30% of total electricity consumption, second only to the industrial sector. Buildings that exist today will continue to represent most of both energy and greenhouse gas (GHG) emissions from the built environment, with newly constructed buildings representing only a small additional portion. This paper analyzes the environmental, technical, and financial characteristics of energy efficiency retrofit activities in commercial buildings in Thailand through detailed case studies of forty-two projects undertaken over the past 8 years. Our findings suggest that retrofits provide significant opportunities to reduce energy use, energy costs, and GHG emissions while also validating the economic feasibility of inves... [more]

The combination of building energy management technology and technology of the Fourth Industrial Revolution has a significant potential for reducing energy consumption and, hence, CO2 emissions. However, numerous studies have indicated barriers preventing market growth. These challenges are mainly attributed to characteristics of the ecosystem of the building energy management systems (BEMS) industry. Thisstudy aimed to identify the major challenges hindering the deployment of BEMS in combination with Fourth Industrial Revolution technologies and to derive policies conducive to the achievement of the effective BEMS industry ecosystem. An analytic hierarchy process (AHP) survey was conducted on key players in the ecosystem to achieve this. The main elements of the ecosystem, economic, institutional, technology, and social system that earned weight, followed a decreasing trend in this order. Among the sub-elements, the payback period, upfront cost, electricity pricing scheme, energy cons... [more]

Electrical and thermal loads of residential buildings present a unique opportunity for onsite power generation, and concomitant thermal energy generation, storage, and utilization, to decrease primary energy consumption and carbon dioxide intensity. This approach also improves resiliency and ability to address peak load burden effectively. Demand response programs and grid-interactive buildings are also essential to meet the energy needs of the 21st century while addressing climate impact. Given the significance of the scale of building energy consumption, this study investigates how cogeneration systems influence the primary energy consumption and carbon footprint in residential buildings. The impact of onsite power generation capacity, its electrical and thermal efficiency, and its cost, on total primary energy consumption, equivalent carbon dioxide emissions, operating expenditure, and, most importantly, thermal and electrical energy balance, is presented. The conditions at which a... [more]

Despite the introduction of increasingly restrictive regulations, the air quality in Poland is still considered one of the worst in Europe. Two cities (Wroclaw and Cracow) were selected for this study, so they represent a pair of Polish cities with poor air quality, and at the same time are academic cities, popular with tourists. The article focuses on the emission of particulate matter, which is one of the most dangerous components of air pollution. The focus was on particles less than 10 µm in diameter which are most often neglected at measuring stations. We have identified the sources of particulate emissions in selected locations in Wroclaw and Cracow, and then measured particles in terms of their mass and number distribution. It was noted that the PM10 emission values obtained as a result of the measurements were different from the value specified by the Inspectorate of the Environmental Protection in Poland.

While the production costs and logistical benefits of biomass pelleting have been widely discussed in the literature, the downstream economic and environmental benefits of processing pelleted biomass have been largely neglected. To investigate those benefits, we performed a comparative techno-economic analysis and life cycle assessment of producing ethanol using loose and pelleted forms of biomass. Analyses of a 2000 metric tons (dry)/d biorefinery showed that using pelleted biomass is more economical than using loose or baled biomass. The lowest minimum ethanol selling price (MESP) for pelleted biomass was USD 0.58/gal less than the lowest MESP for loose biomass. Among all processing conditions analyzed, MESP for ethanol produced with pelleted biomass was always lower than when produced with loose biomass. Shorter pretreatment and hydrolysis times, higher pretreatment solids loadings, lower ammonia requirements, and reduced enzyme loadings were the primary factors contributing to lowe... [more]

Due to the continuous diurnal, seasonal, and annual changes in the German power supply, prospective dynamic emission factors are needed to determine greenhouse gas (GHG) emissions from hybrid and flexible electrification measures. For the calculation of average emission factors (AEF) and marginal emission factors (MEF), detailed electricity market data are required to represent electricity trading, energy storage, and the partial load behavior of the power plant park on a unit-by-unit, hourly basis. Using two normative scenarios up to 2050, different emission factors of electricity supply with regard to the degree of decarbonization of power production were developed in a linear optimization model through different GHG emission caps (Business-As-Usual, BAU: −74%; Climate-Action-Plan, CAP: −95%). The mean hourly German AEF drops to 182 gCO2eq/kWhel (2018: 468 gCO2eq/kWhel) in the BAU scenario by the year 2050 and even to 29 gCO2eq/kWhel in the CAP scenario with 3700 almost emission-free... [more]

Environmental protection, and in particular air protection against pollution, is an extremely important element of the global policy of many countries. The problem of air pollution is particularly important in Poland, where the heating market is one of the largest in Europe and is based in 74% on the use of fossil fuels, in particular hard coal. One of the technological solutions for the implementation of cleaner fuels is the co-combustion of coal and biomass. This process enables the reduction of harmful pollutants such as CO2, SO2, and can be implemented in existing boilers. Heating boilers achieve the highest design efficiency during optimal load at the level of 85−95% of nominal power. Under such conditions, heat production is most efficient. During operation, boilers are often started, extinguished or run below rated output, resulting in increased emissions. This publication presents the results of measurements of efficiency and concentrations of pollutants in the WR water boiler... [more]

Cellulosic biorefineries have attracted interest due to the growing energy security and environmental concerns related to fossil fuel-based energy and chemicals. Using pelleted biomass as a biorefinery feedstock can reduce their processing inputs while improving biomass handling and transportation. However, it is still questionable whether energy and emission savings from feedstock transportation and processing can justify pelletization. A life cycle assessment approach was used to compare energy consumption and greenhouse gas (GHG) emissions from pelleted and non-pelleted corn stover as a biorefinery feedstock. Operations considered were pelleting, transportation, and soaking in aqueous ammonia (SAA) pretreatment. Despite greater GHG emissions (up to 25 times higher than the transportation) generated from the pelleting process, the model showed a significant opportunity to offset and even reduce overall GHG emissions considering the pretreatment process benefits. Our process energy an... [more]

Attaining a good level of internal comfort is possible by controlling various parameters. Among all, the thermo-hygrometric comfort and the indoor air quality are of fundamental importance. This research is developed with the aim of verifying the indoor air quality following the installation of a passive cooling device in a historic building located in the province of L’Aquila in the municipality of Poggio Picenze in climatic zone E. This research aims to verify the functioning of a ventilation duct installed between the hypogeal and the second level of the structure that was installed to obtain air recirculation by exploiting the inertial potential of the hypogeal room. The first phase of the research was aimed at thermo-hygrometric monitoring using sensors installed on-site and controlled remotely in order to verify the operation of the device. The second-phase object of this text was useful in investigating the acquired indoor air quality level.

Electrolytes are involved in the thermal runaway (TR) process of cells, which is a potential hazard in lithium-ion batteries (LIBs). Therefore, the effects of different mass ratio of carbonate solvents (ethylene carbonate (EC)/propylene carbonate (PC)/ethyl methyl carbonate (EMC)) with LiBF4 and different environmental pressure on the combustion characteristics of electrolyte such as flame centerline temperature, mass loss rate (MLR) and heat release rate (HRR) were analyzed. The combustion process could be divided into four stages: ignition, stable combustion stage, stable combustion with flame color change stage and extinguishing; with the decrease of pressure, the MLR of electrolyte declined and the combustion time prolonged, while the temperature of flame centerline increased.

Greenhouse gas (GHG) emissions related to the Farnsworth Unit’s (FWU) carbon dioxide enhanced oil recovery (CO2-EOR) operations were accounted for through a gate-to-gate life cycle assessment (LCA) for a period of about 10 years, since start of injection to 2020, and predictions of 18 additional years of the CO2-EOR operation were made. The CO2 source for the FWU project has been 100% anthropogenically derived from the exhaust of an ethanol plant and a fertilizer plant. A cumulative amount of 5.25 × 106 tonnes of oil has been recovered through the injection of 1.64 × 106 tonnes of purchased CO2, of which 92% was stored during the 10-year period. An LCA analysis conducted on the various unit emissions of the FWU process yielded a net negative (positive storage) of 1.31 × 106 tonnes of CO2 equivalent, representing 79% of purchased CO2. An optimized 18-year forecasted analysis estimated 86% storage of the forecasted 3.21 × 106 tonnes of purchased CO2 with an equivalent 2.90 × 106 tonnes o... [more]

Anaerobic digestion is considered unsuitable for the bioremediation of tannery effluent due to process inhibition, mainly due to high concentrations of sulfur species, and the accumulation of H2S and/or NH3. This study using the standardized biochemical methane potential protocol showed that efficient processing is possible with slaughterhouse wastewater, provided sufficient functional biomass is present at the start of the process and the SO42− concentration is below inhibition threshold. Methanogenic activity (K = 13.4−17.5 and µm = 0.15−0.27) and CH4 yields were high when reactors were operated ISR ≥ 3 and/or lower SO42− ≤ 710 mg/L while high SO42− ≥ 1960 mg/L and ISR < 3.0 caused almost complete inhibition regardless of corresponding ISR and SO42−. The theoretical optimum operating conditions (922 mg/L SO42−, ISR = 3.72) are expected to generate 361 mL biogas/gVS, 235 mL CH4/gVS with reduction efficiencies of 27.5% VS, 27.4% TS, 75.1% TOC, 75.6% SO42−, and 41.1% COD. This implies t... [more]

This research emphasizes the analysis and assessment of the environmental impact in the construction sector. It aims to propose a model for analyzing the management of environmental resources in the building process. This specific sector presents a significant potential risk of negatively affecting the environment, through pollution, energy consumption, and waste generation. Environmental responsibility involves analyzing the environmental impact and implementing effective solutions for an adequate governance of the environmental resources. Various life cycle assessment methods are employed to design a new model of management of environmental resources, starting from the factors impacting the environment. The resulting model takes these factors into account and carries several advantages from an organizational point of view. One novel result is that the model can be applied at a microeconomic level as well as at a macroeconomic level. By implementing this model, the preconditions for r... [more]

One of the fundamental maintenance tasks of ports is the periodic dredging of them. This is necessary to guarantee a minimum draft that will enable ships to access ports safely. The determination of bathymetries is the instrument that determines the need for dredging and permits an analysis of the behavior of the port bottom over time, in order to achieve adequate water depth. Satellite data processing to predict environmental parameters is used increasingly. Based on satellite data and using different machine learning algorithm techniques, this study has sought to estimate the seabed in ports, taking into account the fact that the port areas are strongly anthropized areas. The algorithms that were used were Support Vector Machine (SVM), Random Forest (RF) and the Multi-Adaptive Regression Splines (MARS). The study was carried out in the ports of Candás and Luarca in the Principality of Asturias. In order to validate the results obtained, data was acquired in situ by using a single bea... [more]

Contemporary research stresses the need to reduce mankind’s environmental impacts and achieve sustainability. One of the keys to this is the construction sector. New buildings have to comply with strict limits regarding resource consumption (energy, water use, etc.). However, they make up only a fraction of the existing building stock. Renovations of existing buildings are therefore essential for the reduction of the environmental impacts in the construction sector. This paper illustrates the situation using a case study of a rural terraced house in a village near Brno, Czech Republic. It compares the life-cycle assessment (LCA) of the original house and its proposed renovation as well as demolition followed by new construction. The LCA covers both the initial embodied environmental impacts (EEIs) and the 60-year operation of the house with several variants of energy sources. The results show that the proposed renovation would reduce overall environmental impacts (OEIs) of the house by... [more]

Nuclear power remains one of the most accessible choices in addressing environmental and social concerns due to the continuously increasing energy needs around the world. While it remains an excellent source of energy due to its low price and low level of emissions, potential accidents remain a serious problem. An example of such is the most recent accident in the Fukushima Daiichi Nuclear Power Plant (2011), which reminded the world of the potential risks of nuclear energy and the consequences of which continue to have a lasting effect. There is no nuclear power plant in Serbia, but there are about 15 nuclear power stations scattered within its neighboring countries. Therefore, the Serbian Government decided to study how the Serbian public perceives the risks related to the potential construction of nuclear power stations in the country, nuclear energy in general, and its possible benefits and risks. The objective of this paper is to present the results of this assessment along with a... [more]

The enrichment of natural gas with hydrogen has been identified as a promising pathway for power-to-gas technology with the potential to reduce emissions while achieving feasible return on investment. The evolving regulatory market in the province of Ontario motivates the analysis of business cases for hydrogen on the industrial microgrid scale. This paper aims to investigate the financial and environmental returns associated with producing and storing electrolytic hydrogen for injection into the natural gas feed of a manufacturer’s combined heat and power plants (CHPs). A mathematical methodology was developed for investigating the optimal operation of the integrated system (power-to-gas along with the current system) by considering hydrogen-enriched natural gas. The result of this simulation is an operation plan that delivers optimal economics and an estimate of greenhouse gas emissions. The simulation was implemented across an entire year for each combination of generation price lim... [more]

This work aimed to estimate the annual methane production from the municipal solid waste disposal sites in Pakistan. In this study, the Intergovernmental Panel on Climate Change (IPCC) default methodology was used to estimate theoretical methane formation potential of the waste disposal sites in major cities of Pakistan. The estimates of this study are based on the last population census conducted in the year 2017 and latest available data regarding the waste generation and management practices in the cities considered in the study. Results showed that 31.18 million tonnes of municipal solid waste (MSW) is generated annually. The top 10 major populated cities in Pakistan (with 20% share in country’s population) contributing 31% share in the total quantity of MSW generated in overall country. On average 50−60% of the MSW generated is collected and openly dumped at the designated waste disposal sites. After analyzing the data, we estimate that annually 12.8 MtCO2-eq of methane is emitted... [more]

Meeting biorefineries’ demands for lignocellulosic biomass will require sourcing feedstock without affecting the food or animal-feed supply. A decision-aid model can assess the dual use of switchgrass (Panicum virgatum L.) to maintain animal production while providing biomass. We simulated a mixed-farm operation with 156 ha of hay+pasture, 96 beef cows (Bos spp.), and poultry (Gallus gallus L.) production wherein the hay land was converted to switchgrass for dual use as biomass and forage. The cow-calf simulator tracked changes in forage and cattle production, economic returns, and net greenhouse gas (GHG) emissions. Dual use of switchgrass consisted of harvesting the first cutting (mid-June) for hay and the second cutting (October-November) for biomass. Dual use required a modest increase in fertilizer application and supplementing cows with corn grain to meet nutritional requirements. Converting hay land to dual-use switchgrass produced 122 Mg of switchgrass, reduced net GHG emission... [more]

The circular economy (CE) as an idea involves applying the concept of sustainable development that has been gaining worldwide support. This shift in perception of energy and resource-use from its linear to circular forms creates a specific business environment, which constitutes the subject of this research. This article aims to analyze the impact of a manager’s energy on organizational wisdom, focusing on its circular business model activity. In the beginning, the article focuses on presenting ideas of the circular economy, emphasizing the manager’s activity in implementing strategic and operational tasks. These activities are identified as energy to launch mechanisms for developing organizational wisdom for sustainable enterprise. Assuming that organizational wisdom consists of two dimensions, organizational learning, and absorptive capacity, the research identifies relationships between them. The study was conducted at VIVE Textile Recycling Ltd., (Kielce, Poland). Empirical data we... [more]

Vehicle exhaust emission tests use exhaust sampling systems that dilute the exhaust gas with ambient air. The dilution factor DF is calculated assuming that the combustion is complete, and that the engine is operated at a stoichiometric air-fuel ratio (AFR). These assumptions are not always met. This is especially true for diesel engines. This article discusses the tests to find out what the average lambda (λ) over the ARTEMIS, WLTC and NEDC driving cycles is and how this affects the result of the emission measurements. Measurements were carried out on a chassis dynamometer equipped with a standard emission measurement system used during the homologation. The λ was calculated using the Brettschneider equation. The dilution ratio DR was also determined by measuring the CO2 concentration in the raw exhaust gas. The CO2-tracer method used for this was modified. The median of the λ for a CI vehicle was 1.23−3.31, which makes the relative percentage difference between the DF and DR (ΔDF) in... [more]

Building performance from an energy and an environmental point of view is fundamental due to the large amount of GHG emissions related to the building sector [...]

In this paper, the effectiveness of lightning overvoltage protection of cables in high voltage overhead cable lines has been analyzed. Because of the high overvoltage level, the cables are protected by surge arresters and by metallic sheath earthing. However, in practice, quite a lot of cases of electricity-evoked damage to the cable outer sheaths are observed, proving that the effectiveness of the protection used is insufficient. As a result, the cables are exposed to environmental factors, especially moisture penetration, which contributes to cable degradation. To explain the causes of this situation, simulation studies were carried out to determine the relevant factors affecting the level of expected overvoltages. The circuit-field model of the overhead cable line in EMTP-ATP, COMSOL and MATLAB software was used for determining overvoltages on the main cable insulation and the outer protective sheath. The studies reveal that the efficiency of the cable insulation overvoltage protect... [more]