The article presents the methodology of isolating aperiodic phenomena constituting the basis of the energy balance of vehicles for the analysis of electromobility system indicators. The symptom observation matrix (SOM) and experimental input data are used to analyze periodic phenomena symptoms. The multidimensional nature of the engine efficiency shortage has been well defined and analyzed in terms of errors in the general model using neural networks, singular value decomposition, and principal component analysis. A more difficult task is the analysis of a multidimensional decision-making process. The research used a data fusion method and the concept of symptom reliability, which is applied to the generalized failure symptom obtained by applying the singular value decomposition (SVD). The model research has been based on the gray system theory (GST) and GM forecasting models (1,1). Input data were obtained from the assessment of driving cycles and analysis of the failure frequency for... [more]

In the context of the 2030 Agenda for Sustainable Development, by adopting the EU Renewable Energy Directive and the European Green Deal, the European Union aims at an extremely ambitious goal to become climate neutral by 2050. This goal involves a massive investment plan to support this initiative, but also to reduce disparities between Member States, in order to transform the Union into a modern, resource-efficient, and competitive economy. The main objective of this paper is to investigate the sustainable development and renewable energy sources relationship in EU countries from a new perspective. Based on Eurostat available data and with the help of hierarchical clustering analysis, the Member States were divided in 2019 into five clusters, highlighting the key characteristics of the selected variables. The results of this research revealed high-performing groups of countries, as well as countries that need increased attention and additional support to become more efficient in achi... [more]

Innovative toilets can save resources, but have higher embodied impacts associated with materials and electronic components. This article presents an environmental life-cycle assessment (LCA) of an innovative multifunctional toilet (WashOne) for two alternative configurations (with or without washlet), comparing its performance with those of conventional systems (toilet and bidet). Additionally, two scenario analyses were conducted: (i) user behavior (alternative washlet use patterns) and (ii) user location (Portugal, Germany, the Netherlands, Sweden and Saudi Arabia). The results show that the WashOne with washlet has a better global environmental performance than the conventional system, even for low use. It also reveals that the use phase has the highest contribution to impacts due to electricity consumption. User location analysis further shows that Sweden has the lowest environmental impact, while Germany and the Netherlands have the highest potential for impact reduction when cha... [more]

Various problems often arise in high-rise buildings during the winter months due to the stack effect. In this study, the high-rise building of interest, located in South Korea, was experiencing constant loud noises in the winter due to the stack effect. Thus, we created a noise level reduction plan by creating a method for pressurizing the high-rise zones of the building according to outdoor conditions. To discover the appropriate pressurization operating modes, we applied a two-year commissioning process to the 50-story building of interest. The 1st- and 47th-floor elevator halls were identified to have the highest noise levels of all other floors. Prior to applying the reduction plan, the maximum noise level on the first floor with the HVAC system turned off was 85 dB(A) and with the HVAC system turned on it was 70 dB(A). Both values exceeded the criteria of 57 dB(A) for a lobby space of a commercial building. In the case of the 47th floor, the maximum noise level with the HVAC syste... [more]

Power-to-methane (P2M) technology is expected to have a great impact on the future of the global energy sector. Despite the growing amount of related research, its potential disruptive impact has not been assessed yet. This could significantly influence investment decisions regarding the implementation of the P2M technology. Based on a two-year-long empirical research, the paper focuses on exploring the P2M technology deployment potential in different commercial environments. Results are interpreted within the theoretical framework of disruptiveness. It is concluded that P2M has unique attributes because of renewable gas production, grid balancing, and combined long-term energy storage with decarbonization, which represent substantial innovation. Nevertheless, empirical data suggest that the largest P2M plants can be deployed at industrial facilities where CO2 can be sourced from flue gas. Therefore, a significant decrease of carbon capture technology related costs could enable the dis... [more]

The increasing world population generates huge amounts of wastewater as well as large energy demand. Additionally, fossil fuel’s combustion for energy production causes the emission of greenhouse gases (GHG) and other pollutants. Therefore, there is a strong need to find alternative green approaches for wastewater treatment and energy production. Microalgae biorefineries could represent an effective strategy to mitigate the above problems. Microalgae biorefineries are a sustainable alternative to conventional wastewater treatment processes, as they potentially allow wastewater to be treated at lower costs and with lower energy consumption. Furthermore, they provide an effective means to recover valuable compounds for biofuel production or other applications. This review focuses on the current scenario and future prospects of microalgae biorefineries aimed at combining wastewater treatment with biofuel production. First, the different microalgal cultivation systems are examined, and the... [more]

Covalent organic frameworks (COFs) are emerging crystalline polymeric materials with highly ordered intrinsic and uniform pores. Their synthesis involves reticular chemistry, which offers the freedom of choosing building precursors from a large bank with distinct geometries and functionalities. The pore sizes of COFs, as well as their geometry and functionalities, can be pre-designed, giving them an immense opportunity in various fields. In this mini-review, we will focus on the use of COFs in the removal of environmentally hazardous metal ions and chemicals through adsorption and separation. The review will introduce basic aspects of COFs and their advantages over other purification materials. Various fabrication strategies of COFs will be introduced in relation to the separation field. Finally, the challenges of COFs and their future perspectives in this field will be briefly outlined.

The quality of the indoor environment has become a vital component for buildings due to the time spent indoors. To this extent, the performance of the indoor environment is considered as part of the greenery criteria by green rating schemes such as the Green Building Index in Malaysia. This study aims to investigate and assess the quality of the indoor environment of Platinum-certified office buildings in a tropical climate. This research applied a case study approach over two Platinum-certified office buildings. Post-occupancy evaluation is employed integrating full-scale measurement with an occupants’ survey. The measurement was carried out from May to August, and 112 questionnaires were retrieved to evaluate occupants’ satisfaction with aspects of the indoor environment. Thermal comfort, indoor air quality, acoustic, lighting, furniture, and cleanliness are considered as the main study variables. The findings of full-scale measurement indicated high relative humidity, and low air ve... [more]

This study proposes a multi-objective approach for the optimal design of a sustainable Integrated Biodiesel/Diesel Supply Chain (IBDSC) based on first- (sunflower and rapeseed) and second-generation (waste cooking oil and animal fat) feedstocks with solid waste use. It includes mixed-integer linear programming (MILP) models of the economic, environmental and social impact of IBDSC, and respective criteria defined in terms of costs. The purpose is to obtain the optimal number, sizes and locations of bio-refineries and solid waste plants; the areas and amounts of feedstocks needed for biodiesel production; and the transportation mode. The approach is applied on a real case study in which the territory of Bulgaria with its 27 districts is considered. Optimization problems are formulated for a 5-year period using either environmental or economic criteria and the remainder are defined as constraints. The obtained results show that in the case of the economic criterion, 14% of the agricultur... [more]

The diversity and degradation capacity of hydrocarbon-degrading consortia from surface and deep waters of the Eastern Mediterranean Sea were studied in time-series experiments. Microcosms were set up in ONR7a medium at in situ temperatures of 25 °C and 14 °C for the Surface and Deep consortia, respectively, and crude oil as the sole source of carbon. The Deep consortium was additionally investigated at 25 °C to allow the direct comparison of the degradation rates to the Surface consortium. In total, ~50% of the alkanes and ~15% of the polycyclic aromatic hydrocarbons were degraded in all treatments by Day 24. Approximately ~95% of the total biodegradation by the Deep consortium took place within 6 days regardless of temperature, whereas comparable levels of degradation were reached on Day 12 by the Surface consortium. Both consortia were dominated by well-known hydrocarbon-degrading taxa. Temperature played a significant role in shaping the Deep consortia communities with Pseudomonas a... [more]

The research on the multimodal transport development within the cross-border area is a result of identified gaps in the system solutions and cooperation between stakeholders of three countries: Poland, the Czech Republic and Slovakia. Freight transport is an especially complex problem. It is an area that is not comprehensively recognized in the context of cross-border cooperation. The results of the research presented in this paper are the continuation of analyses performed within the scope of the international project framework TRANS TRITIA. At the moment, transport policy assumes the struggle for the utilization of multimodality within freight transport. This is justified by the need to reduce external transport costs. At the same time, this necessitates actions of a technical, organizational, and legislation nature as well as cooperation between stakeholders. The multimodal transport ecosystem is a vision of the transport within cross-border areas that assumes the increase in the fl... [more]

Superconductor technology has recently attracted increasing attention in power-generation- and electrical-propulsion-related domains, as it provides a solution to the limited power density seen by the core component, electrical machines. Superconducting machines, characterized by both high power density and high efficiency, can effectively reduce the size and mass compared to conventional machine designs. This opens the way to large-scale purely electrical applications, e.g., all-electrical aircrafts. The alternating current (AC) loss of superconductors caused by time-varying transport currents or magnetic fields (or both) has impaired the efficiency and reliability of superconducting machines, bringing severe challenges to the cryogenic systems, too. Although much research has been conducted in terms of the qualitative and quantitative analysis of AC loss and its reduction methods, AC loss remains a crucial problem for the design of highly efficient superconducting machines, especiall... [more]

Energy sustainability constitutes an important goal for development, as declared at the global and the European levels. Some conditions decisive for energy performance, as suggested by the Environmental Kuznets Curve (EKC) hypothesis, may be specified by the sectoral structure of production, as industries vary in the intensity of energy consumption. Nevertheless, sustainability is not automatically induced along with economic development and it is important to identify its determinants. The aim of the study is to empirically verify whether the sectoral structure of an economy differentiates energy sustainability within 28 European Union member states (the EU-28). To fulfil the task, a static approach was adopted and such taxonomic methods as the Ward agglomeration method and linear ordering based on the Hellwig synthetic measure were used. The hypothesis concerning the essential role of structural features in energy achievements was verified by a one-way analysis of variance. Our resul... [more]

It has been proven that to solve the problems that arise in the combinatorial modeling of the prospects for the development of regional renewable energy, an algorithmically simple general combinatorial approach is the most appropriate option. The conceptual express method and corresponding mechanisms of the economic estimation of the efficiency of variants of the formation of regional systems of renewable energy have been suggested. These variants take into account the inflationary factors which serve as a basis of the analysis of investment and innovative projects of renewable energy sources by means of combinatorial modeling methods. To qualitatively analyze the effectiveness of the compared options, the system of existing indicators of the economic efficiency of renewable energy sources at the meso-level has been studied. The system was supplemented by informal and environmental indicators, the need for which is due to the fact that they have a significant impact on renewable energy... [more]

The issue of energy behaviour among Polish consumers, and especially the motives and attitudes they manifest, is relatively under-researched. This article attempts to identify individual attitudes and beliefs of energy consumers using the example of the residents of the province of Silesia (Poland). The authors conducted the expert segmentation of respondents in terms of their motivation for saving energy, based on the results of their proprietary survey. The second stage of the study involved using a classification model that allowed for the characterisation of the obtained groups. Psychological and financial factors were of greatest significance, which is confirmed by the results of other studies. Nonetheless, the obtained results explicitly indicate the specificity of the region, which requires transformation towards a low-emission economy. Despite the initial stage of changes both in the awareness of the consumers and the public interventions of the authorities, it should be emphas... [more]

It is a fact that electric vehicles (EVs) are beneficial for climate protection. However, the current challenge is to decide on whether to reuse an EV battery or to recycle it after its first use. This paper theoretically investigates these areas i.e., recycle and reuse. It was found that there are several commercially used recycling processes and also some are under research to regain maximum possible materials and quantity. The concept of reusing (second life) of the battery is promising because, at the end of the first life, batteries from EVs can be used in several applications such as storing energy generated from renewable sources to support the government grid. However, the cost and life-cycle analysis (LCA) demonstrated that there are several aspects involved in battery reuse applications. Henceforth, one LCA generalised method cannot provide an optimal approach for all cases. It is important to have a detailed study on each of the battery reusing applications. Until then, it i... [more]

Environmental issues in energy policy, especially global warming, have received more attention lately than ever before. Excessive dependence on fossil fuels, deforestation, and land degradation are the three main factors that lead to increased carbon dioxide (CO2) emissions. Consequently, the global average temperature has doubled compared to anticipation. Various international protocols and agendas have been established, pledged to restore the global average temperature to the 1990 level. As a result, energy policies worldwide have also undergone various transformations to align with these protocols since then. As a developing nation, Malaysian’s electricity demand has continuously grown in the past two decades. To date, the electricity sector is still dominated by fossil fuels. Government incentives have been the most influential factor in the nation’s energy mix trend. Several energy policies implemented throughout the past 22 years have seen the shift from natural gas to coal power... [more]

High initial costs hinder innovative technologies for building envelopes. Life Cycle Assessment (LCA) should consider energy savings to show relevant economic benefits and potential to reduce energy consumption and CO2 emissions. Life Cycle Cost (LCC) and Life Cycle Energy (LCE) should focus on investment, operation, maintenance, dismantling, disposal, and/or recycling for the building. This study compares the LCC and LCE analysis of Water Flow Glazing (WFG) envelopes with traditional double and triple glazing facades. The assessment considers initial, operational, and disposal costs and energy consumption as well as different energy systems for heating and cooling. Real prototypes have been built in two different locations to record real-world data of yearly operational energy. WFG systems consistently showed a higher initial investment than traditional glazing. The final Life Cycle Cost analysis demonstrates that WFG systems are better over the operation phase only when it is compare... [more]

The author intended to present the relationship between the standard of living of EU citizens and the level of the development of renewable energy. It is particularly important in the context of the implementation of the sustainable development idea, by ensuring a high standard of living for both current and future generations, with rational use of available natural resources. The first, theoretical part of the article presents the problem related to the impact of renewable energy on the standard of living in a synthetic way. The second part involves empirical research conducted in all countries of the EU. To evaluate the level of renewable energy development and the standard of living, the author constructed original measures based on the TOPSIS method. Variables were selected on the basis of substantive, statistical and formal criteria (primarily the completeness and availability of data in 2019). Within the framework of the conducted study, the author obtained, among other things, a... [more]

Electromobility is a growing technology for land transport, constituting an important element of the concept of sustainable economic development. The article presents selected research results concerning one of the segments of this market-vehicles powered by hydrogen fuel cells. The subject of the research was to gain extensive knowledge on the economic factors influencing the future purchasing decisions of the demand side in relation to this category of vehicles. The research was based on a numerical experiment. For this purpose, a comparative analysis of purchase prices in relation to the TCO of the vehicle after 3−5 years of use was performed. The research included selected models that are powered by both conventional and alternative fuels. The use of this method will allow to assess the real costs associated with the hydrogen vehicle. The authors emphasize the important role of economic factors in the form of the TCO index for the development of this market. The experimental approa... [more]

Through spatial electric field monitoring, it is expected to realize insulator pollution condition monitoring and contamination flashover warning in a non-contact way. Therefore, in this paper, the spatial electric field distribution characteristics of 110 kV composite insulators are simulated, where the effects of different surface states and their discharge levels on the spatial electric field of insulators are analyzed. On this basis, a non-contact monitoring method for composite insulator pollution based on the spatial electric field is proposed. The results show that there are significant differences in the spatial electric field of the composite insulator among three conditions, namely cleaning, pollution layer wetting, and dry band arcing. Increases of pollution layer wetting and dry band arcing would lead to an increase of the amplitude of the spatial electric field of the insulator. Verification experiments well indicated that it is feasible to identify the degree of pollution... [more]

The main goal of this study was to assess the levels of concentration of biological air pollutants in biomass processing power plants, based on the measurements taken in a plant located in Southern Poland. This work shows problems related to the co-combustion of biomass and indicates the health risks to which employees of positions closely related to the processing and combustion of biomass are exposed. Bacterial and fungal aerosol samples were collected using a six-stage Andersen cascade impactor with aerodynamic cut-off diameters of 7.0, 4.7, 3.3, 2.1, 1.1 and 0.65 µm (Tisch Environmental, USA). The highest average concentration level of micro-organisms was recorded in the air in the biomass analysis laboratory, where there was no constant airflow. It was found that the concentration levels of biological agents were below the Polish proposals for threshold limit values in the work environment polluted with organic dust. However, it was observed that the share of the respirable fracti... [more]

This review presents an analysis of three hypotheses. The articles provide a specific perspective on green housing before, during, and post COVID-19. The validations of these hypotheses were performed by analyzing the scientific literature worldwide and by adding a statistical analysis of appropriate articles from the Scopus database. The purpose of this review is to overview the research written on housing developments during the upsurge of COVID-19 along with the responses from the green building sector, because this field appears to be rapidly emerging by the sheer volume of research studies currently undertaken. Foremost peer-reviewed journals covering construction, urban studies, real estate, energy, civil engineering, buildings, indoor air, management, economics, business, environmental studies, and environmental sciences that were published last year were selected for review. The review was conducted by applying a combination of various keywords and the criteria for paper select... [more]

The introduction of stationary storage systems into the Italian electric network is necessary to accommodate the increasing share of energy from non-programmable renewable sources and to reach progressive decarbonization targets. In this framework, a life cycle assessment is a suitable tool to assess environmental impacts during the entire life cycle of stationary storage systems, i.e., their sustainability. A Li-ion battery (lithium−iron−phosphate (LFP), nickel−manganese−cobalt (NMC) 532, and NMC 622) entire life cycle assessment (LCA) based on primary and literature data was performed. The LCA results showed that energy consumption (predominantly during cell production), battery design (particularly binder choice), inventory accuracy, and data quality are key aspects that can strongly affect results. Regarding the battery construction phase, LFP batteries showed better performance than the NMC ones, but when the end-of-life (EoL) stage was included, NMC cell performance became very c... [more]

In the case of developing countries, it is not clear which crisis management tools will ensure sustainable development in a sustainable and environmentally friendly way, as well as reducing CO2 emissions in addition to ensuring GDP growth. The next analysis discusses the details of this issue. The study explores the connection between per capita GDP, emission of CO2, combustible energy, and waste consumption. The Hausman test ratifies that the regression model with the fixed effect is the proper method for the panel balanced data from 1990 to 2019 in the selected 13 countries of the EU. This study ordered the data into three categories (for 13 selected countries, the top nine EU countries (in GDP), and Visegrad countries (Hungary, Slovakia, Czech Republic and Poland)). The study found a significant positive effect of combustible energy and waste consumption and the negative impact of CO2 emission on GDP per capita. The cointegration test confirms that all three variables are cointegrat... [more]