The dynamic development of aviation is associated with many benefits, but also, unfortunately, with negative effects. One of the adverse consequences is the exhaust emissions that have a negative impact on human health. It particularly affects the residents of areas neighboring airports, as airport activity deteriorates local air quality. Using the Emissions and Dispersion Modeling System, the activity of the Nicolaus Copernicus Airport was assessed in terms of the flight operations’ contribution to air contamination in the area adjacent to the airport. Emissions from three sources were compared: aircraft, ground support equipment and auxiliary power units. The concentrations of pollutants in inhabited areas located in three different directions in relation to the airport were also estimated. In addition, the effect of distance from the airport on contaminant concentrations was assessed as a function of wind direction. It was noticed that small values of pollutant concentrations, origi... [more]

The paper examines the impact of the COVID-19 pandemic on human resource management processes in project-oriented companies. It is proposed to use formal transformations on groups of performers. The use of formal transformations will reduce the influence of the subjective factor and improve the quality of sustainability management decisions made when forming a project team. The formalization of the selection process of applicants and the distribution of work among the performers have been considered. The existing methods of forming a project team with functional redundancy are approximate. Methodological support for the process of forming a project team with functional redundancy, based on a logical-combinatorial approach, and allowing to form project teams under given constraints, is proposed. A method of forming a functionally redundant project team based on formal transformations of groups of performers has been developed. The use of the apparatus of symbolic sequences for the forma... [more]

Quantifying frequency converters’ residual phase noise is essential in various applications, including radar systems, high-speed digital communication, or particle accelerators. Multi-input signal source analyzers can perform such measurements out of the box, but the high cost limits their accessibility. Based on an analysis of phase noise transmission theory and the capabilities of popular instrumentation, we propose a technique extending the functionality of single-input devices. The method supplements absolute noise measurements with estimates of the phase noise transfer function (also called the jitter transfer function), allowing the calculation of residual noise. The details of the hardware setup used for the method verification are presented. The injection of single-tone and pseudo-random modulations to the test signal is examined. Optional employment of a spectrum analyzer can reduce the time and number of data needed for characterization. A wideband synthesizer with an integra... [more]

Thermal energy storage based on phase change materials (PCMs) can improve the efficiency of energy utilization by eliminating the mismatch between energy supply and demand. It has become a hot research topic in recent years, especially for cold thermal energy storage (CTES), such as free cooling of buildings, food transportation, electronic cooling, telecommunications cooling, etc. This paper summarizes the latest research progress of the PCMs-based CTES. Firstly, the classification of PCMs for low temperature storage is introduced; the thermal physical properties (e.g., phase change temperature (PCT) and latent heat) of suitable PCM candidates (−97 to 30 °C) for CTES are summarized as well. Secondly, the techniques proposed to enhance the thermal properties of PCMs are presented, including the addition of nanomaterials, the microencapsulation and the shape stabilization. Finally, several representative applications (−97 to 65 °C) of PCMs in different CTES systems are discussed. The pr... [more]

This paper presents the results of the technological and economic analysis of mine water treatment systems before their discharge into the environment. The following analysis enabled us to determine the profitability of the investment, taking into account the TSS (total suspended solids) concentration in mine water. The simulation results showed that it is economically profitable to apply a water treatment system if natural sedimentation carried out in underground mine water passages, or in sedimentation tanks located on the ground, is ineffective for TSS removal. Economic and financial parameters allow us to conclude that all analyzed variants of the application of a pre-treatment system are characterized by high economic effectiveness. This mainly results from the high profitability of an analyzed investment, comparatively low capital expenditure, and present low market percentage rates. The most profitable variant (TSS concentration is 1000 mg/dm3) brings significant economic indica... [more]

This paper presents a method to design active suspension controllers for a 7-Degree-of-Freedom (DOF) full-car (FC) model from controllers designed with a 2-DOF quarter-car (QC) one. A linear quadratic regulator (LQR) with 7-DOF FC model has been widely used for active suspension control. However, it is too hard to implement the LQR in real vehicles because it requires so many state variables to be precisely measured and has so many elements to be implemented in the gain matrix of the LQR. To cope with the problem, a 2-DOF QC model describing vertical motions of sprung and unsprung masses is adopted for controller design. LQR designed with the QC model has a simpler structure and much smaller number of gain elements than that designed with the FC one. In this paper, several controllers for the FC model are derived from LQR designed with the QC model. These controllers can give equivalent or better performance than that designed with the FC model in terms of ride comfort. In order to use... [more]

Heating, ventilating, and air conditioning (HVAC) units account for a significant consumption share in buildings, namely office buildings. Therefore, this paper addresses the possibility of having an intelligent and more cost-effective solution for the management of HVAC units in office buildings. The method applied in this paper divides the addressed problem into three steps: (i) the continuous acquisition of data provided by an open-source building energy management systems, (ii) the proposed learning and predictive model able to predict if users will be working in a given location, and (iii) the proposed decision model to manage the HVAC units according to the prediction of users, current environmental context, and current energy prices. The results show that the proposed predictive model was able to achieve a 93.8% accuracy and that the proposed decision tree enabled the maintenance of users’ comfort. The results demonstrate that the proposed solution is able to run in real-time in... [more]

The development of technologies to improve the performance of photovoltaic (PV) module integrated converters (MICs) is fundamental to increase the use of distributed generation systems with photovoltaic power source in large urban centers, mainly for complex residential roofs. For two-stage PV MICs, high step-up DC-DC converters are required to boost the low PV module voltage to a higher voltage, in order to suit the DC bus voltage requirements of grid-tied inverters. Thus, to support researchers interested in developing DC-DC power conversion for PV microinverters, this paper classifies the DC-DC converters according to their operational and constructive characteristics and presents some elementary voltage-boosting techniques to aid in analyzing and understanding more complex topologies. Finally, high step-up DC-DC converters based on magnetic coupling and switched capacitor widely cited by important works related to PV applications are presented, with their principles of operation an... [more]

Building energy waste has become one of the major challenges confronting the world today, so specifications and targets for building energy efficiency have been put forward in countries around the world in recent years. The schematic design stage matters a lot for building energy efficiency, while most architects nowadays are less likely to make energy efficiency design decisions in this stage due to the lack of necessary means and methods for analysis. An integrated multi-objective multivariate framework for optimization analysis is proposed for the schematic design stage in the paper. Here, the design parameters of the building morphology and the design parameters of the building envelope are integrated for analysis, and an integrated performance prediction model is established for low-rise and medium-rise residential buildings. Then, a comparison of the performance indicators of low-rise and medium-rise residential buildings under five typical urban climatic conditions is carried ou... [more]

The worldwide transformation from fossil fuels to sustainable energy sources will increase the demand for biomass. However, the ash content of many available biomass sources exceeds the limits of national standards. In this study, short-rotation coppice willow biomass was hydrothermally treated at 150, 170 and 185 °C. The higher heating value increased by 2.6% from x¯ = 19,279 J × g−1 to x¯ = 19,793 J × g−1 at 185 °C treatment temperature. The mean ash content was reduced by 53% from x¯ = 1.97% to x¯ = 0.93% at 170 °C treatment temperature, which was below the limit for category TW1b of the European pellet standard for thermally treated biomass. The nitrogen, sulfur and cadmium concentrations were reduced below the limits for category TW1b of the European biomass pellet standard (N: from 0.52% to 0.34%, limit at 0.5%; S: from 0.051% to 0.024%, limit at 0.04%; Cd: from 0.83 mg × kg−1 to 0.37 mg × kg−1, limit at 0.5 mg × kg−1). The highest reduction rates were sampled for phosphor (80−84... [more]

Hotels emit large amounts of CO2 when providing services. Carbon neutrality objectives and the growth of homestays have forced hotel managers to pay more attention to carbon reduction. First, this paper adopted the input−output method to calculate hotel CO2 emissions. It was found that the amount of CO2 emissions in the hotel industry decreased from the year of 2016 to 2018, and there are structural differences in the CO2 emissions of the hotel industry in China. Furthermore, this paper adopted the three-stage SBM-DEA model to evaluate hotel CO2 emission efficiency in 30 provinces in China. The results show that CO2 emission efficiency increased significantly when environmental factors were eliminated. A close observation of different regions shows that the eastern region has a higher CO2 emission efficiency than the western and middle regions. The emergence of homestays has led to increased input slacks in the labor and energy consumption of hotels, which has a negative effect on effi... [more]

In the era of globalization and rapid economic growth, affecting most world economies, increased production and consumption are leading to higher levels of energy production and consumption. The growing demand for energy means that energy resources from conventional sources are not sufficient; moreover, its production generates high costs and contributes to the emission of greenhouse gases and waste. In view of the above, many countries have opted to implement an energy transformation. The energy transition allows the transition from an energy system based on conventional fuels to an energy system based mainly on renewable energy (RE) and low-emission sources. In the EU, the development of a “green economy” has become a strategic goal in the fight against climate change. The development of RE offers the possibility to improve the energy security of a given country and the entire EU. New, innovative technologies of RE also increase the attractiveness and competitiveness of the economies... [more]

Renewable energy has a crucial role in facing climate change. One promising strategy is the creation of energy communities that require active involvement from a bottom-up perspective. Their implementation is difficult, as they currently rely on local policies, community readiness, and technological availability. The objective of this paper is to provide a qualitative overview of energy community concepts and strategies at the European level. The aim is to identify common approaches that are framing the development of energy communities, and to understand the most successful steps leading to their creation and growth. To achieve this objective, a threefold methodology is provided: (1) an updated review on policies dealing with energy communities at the European and Italian level; (2) a qualitative overview of European-funded projects under the Horizon 2020 work program; and (3) a qualitative overview of some of the most successful existing energy communities in Europe. The results outl... [more]

Elevated emissions of hydrogen chloride (HCl) from the combustion of biomass in utility boilers are a major issue because they can cause corrosion problems and deposit molten alkali chloride salts on boilers’ water tubes, resulting in further corrosion. Pyrolysis is a good pre-treatment for solving this problem. This work conducted pyrolysis and co-pyrolysis of pulverized corn straw and lignite coal in a horizontal muffle furnace, with compositions typical of power plant combustion effluents (5% O2, 15% CO2, 80% N2) at different temperatures. Cl compounds were monitored in fuel, flue gas, and solid production of pyrolysis. The co-pyrolysis significantly affected Cl release from fuel. Cl release from corn straw into fuel gas was reduced during biomass co-pyrolysis with lignite. Co-pyrolysis had little influence on the release of organic Cl and KCl. Furthermore, at moderate-temperature pyrolysis, O2 promoted HCl release, when compared with pyrolysis under a N2 atmosphere.

The Paris Agreement requires building retrofitting practices to be more efficient and effective. However, the current practice for building energy retrofitting is lacking behind, and one reason for that is the time-consuming process of energy credit evaluation. Energy performance assessment such as BREEAM-NL in the Netherlands could apply a more automatic approach with the help of building information modelling (BIM) for an efficient building energy retrofitting evaluation process. However, to what extent BIM can help in accelerating energy performance evaluation in the BREEAM-NL certification process is under-examined. This paper first combines literature findings with practical interviews from a case study organization to present a holistic overview of the potential for automating energy-related credits evaluation in BREEAM-NL using BIM. To understand the possible impacts of such transition, a responsible, accountable, consulted, and informed (RACI) matrix is developed to map the imp... [more]

With possible new use cases and demanding requirements of future 5th generation (5G) and beyond cellular networks, the future of mobile communications sounds promising. However, the propagation medium has been considered a randomly acting agent between the transmitter and the receiver. With the advent of the digital age of wireless communications, the received signal quality is degrading due to the uncontrollable interactions of the transmitted radio waves with the surrounding artifacts. This paper presents a comprehensive literature review on reconfigurable intelligent surfaces (RISs) and assisted application areas. With the RIS, the network operators can control radio waves’ scattering, reflection, and refraction characteristics by resolving the harmful properties of environmental wireless propagation. Further, the RIS can effectively control the wavefront, such as amplitude, phase, frequency, and even polarization, without requiring complex encoding, decoding, or radio wave processi... [more]

The Brushless Doubly Fed Reluctance Machine (BDFRM) is an emerging alternative for variable speed drive systems, providing a significant downsizing of the power electronics converter. This paper proposes a new view on the machine equations, allowing the reuse of the standard control system design for conventional synchronous and asynchronous machines: a cascade control system with an inner current control- and outer speed control loop. The assumptions and simplifications made on the machine model allow for a simple, model-based approach to set the controller gains in a brushless doubly fed machine drive system. The cascade control scheme is combined with an Unscented Kalman Filter as a state observer, capable of estimating the load torque and losses. The performance of the proposed control system design is checked in simulation and tested in real-time on a low power BDFRM prototype.

Accurate computation of the performance of a horizontal-axis wind turbine (HAWT) using Blade Element Momentum (BEM) based codes requires good quality aerodynamic characteristics of airfoils. This paper shows a numerical investigation of transitional flow over the DU 91-W2-250 airfoil with chord-based Reynolds number ranging from 3 × 106 to 6 × 106. The primary goal of the present paper is to validate the unsteady Reynolds averaged Navier-Stokes (URANS) approach together with the four-equation transition SST turbulence model with experimental data from a wind tunnel. The main computational fluid dynamics (CFD) code used in this work was ANSYS Fluent. For comparison, two more CFD codes with the Transition SST model were used: FLOWer and STAR-CCM +. The obtained airfoil characteristics were also compared with the results of fully turbulent models published in other works. The XFOIL approach was also used in this work for comparison. The aerodynamic force coefficients obtained with the Tra... [more]

In the power and heat sectors, the uncertainty of energy and carbon prices plays a decisive role in the rationale for decommissioning/repurposing coal-fired CHP (combined heat and power) systems and on investment decisions of energy storage units. Therefore, there is a growing need for advanced methods that incorporate the stochastic disturbances of energy and carbon emission prices into the optimization process of an energy system. In this context, this paper proposes an integrated method for investigating the effects of uncertain energy and carbon prices on the operational patterns and financial results of CHP systems with thermal energy storage units. The approach combines mathematical programming and Monte Carlo simulation. The computational process generates feasible solutions for profit maximization considering the technical constraints of the CHP system and the variation of energy and carbon emission prices. Four scenarios are established to compare the operational patterns and... [more]

For vessel-based transport of liquid CO2 in carbon capture and storage chains, transport at 8 bar(a) enable significant cost reductions compared to transport at higher pressures for most transport distances and volumes. Transport at even lower pressures could further reduce the costs. There are, however, concerns related to dry ice formation and potential clogging in parts of the chain that could lead to operational issues when operating close to the triple point pressure of CO2. In this paper, results from an experimental campaign to de-risk and gain operational experience from the low-pressure CO2 liquefaction process are described. Six experiments using pure CO2 or CO2/N2 mixtures are presented. In four of the experiments, the liquid product pressure was continuously lowered until dry ice was detected and eventually clogged the system. In the final two experiments, the liquefaction process was run in steady-state at low liquefaction pressures for five hours to ensure that there is n... [more]

Energy-related investments gain increasing attention nowadays, particularly in Poland due to clean-energy investment needed to limit greenhouse gas emissions (GHG) and counteract climate change. However, economic appraisal is problematic: the longevity of impacts inextricably involves intergenerational ethical considerations. A crucial parameter is the choice of a discount rate. The predominant approach to estimate the discount rate in EU countries is the Ramsey rule, based on macroeconomic data, but not referring directly to society’s preferences. Those are considered by studies using surveys to elicit individual discount rates (IDR), but rarely concentrating on intergenerational time frame. The paper aims at delivering an insight into the intergenerational intertemporal preferences for Poland (households, n = 471) focusing on whether respondents are willing to declare zero discount rate intergenerationally and whether their choices differ between the short- and long-term perspectives... [more]

Earth-to-air heat exchangers (EAHEs) can be used in the ventilation systems of various types of buildings. Multipipe structures can be found in large-volume buildings, yet scientific analysis of such systems is rare. Annual energy gains and electricity consumption for equivalent single-pipe and multipipe systems are typically not available. This paper bridges this gap, presenting the results of experimental studies on pressure losses in three-, five- and seven-pipe EAHEs and analysis for the annual energy gains and electric energy consumption as compared to a single-pipe exchanger. The results showed that the multipipe EAHE can be successfully replaced by a single-pipe structure with the same thermal performance and similar pressure losses if a tube with the appropriate diameter is used. However, multipipe heat exchangers can also use pipes of larger diameter (manifolds and/or branches), which improves their energy efficiency and may then make them more advantageous than single-pipe st... [more]

At the beginning of 2020, the Strategy of the Republic of Croatia until 2030 with an outlook to 2050 was adopted. The Strategy analyzes two energy transition scenarios, the accelerated energy transition and the moderate energy transition. The Strategy is guided and defined by goals set out by the European Union (EU), which primarily states to decrease greenhouse gas emissions and increase the share of renewable energy sources. In order to reach these goals, it is necessary to substitute fossil fuel capacities with new capacities for the production of electricity from renewable sources. In order to do so, a new wave of investments is needed. The Strategy does not detail the macroeconomic effects of investments in renewable sources on the Croatian economy, generally quantified through GDP growth and employment. This paper analyzes the macroeconomic effects of announced investments in renewable energy sources for electricity production. The analysis encompasses the time period 2021−2030.... [more]

The article presents an active bridge system that enables the solution of a significant problem consisting in ensuring correct indications of temperature values in a wide measuring range for a Pt100 temperature sensor with properties defined by the standard (EN-60751 + A2). The presented active bridge system combines the properties of the measuring amplifier with the stabilization of the current value in the branch in which the Pt100 sensor was placed. The article focuses on the comparison of the temperature measurement in a typical resistance bridge and the measurement made in the developed active bridge, which has also become the subject of a patent. For the performed tests, in which the correctness of the temperature measurement system operation was verified, and on the basis of the obtained results, the quality of temperature measurements was compared in a wide range of changes.

One of the strategic objectives of the European Union is a reduction in greenhouse gas emissions and improvement of energy efficiency by at least 32.5% in different areas of the economy by 2030. However, little is known about the impact of payment in retail on energy consumption. The purpose of this paper is to assess the chain of losses of time and energy, and therefore financial losses, that occur due to the imperfection of payment infrastructure and instruments using data of cashiers’ working time. The research is based on a regression analysis method, where the energy cost per payment transaction is considered in this study as a function of the number of customers per hour and the energy cost. The results of the panel models highlight that the number of customers per hour has a negative impact on the cost of energy per payment transaction. Furthermore, modern means and methods of payment, including cryptocurrencies, do not solve the problem of the excessive time that it takes to se... [more]