Tailpipe emissions from vehicles consist of CO2 and other greenhouse gases, which contribute immensely to the rise in global temperatures. Green hydrogen produced from the gasification of biomass can reduce the amount of CO2 emissions to zero. This study aims to provide a modelling framework to optimize the production of hydrogen from biomass waste obtained from different cities, for use in the road transport sector in Nigeria. A gasification model with post-treatment shift conversion and CO2 removal by adsorption is proposed. In this study, six cities are simulated based on technical and environmental considerations, using the Aspen Plus software package. The results revealed that Kaduna has the highest hydrogen generation potential of 0.148 million metric tons per year, which could reduce CO2 emissions to 1.60 and 1.524 million metric tons by the displacement of an equivalent volume of gasoline and diesel. This amounts to cost savings of NGN 116 and 161.8 billion for gasoline and die... [more]

This review article discusses the effects of inorganic content and mechanisms on raw biomass and char during gasification. The impacts of the inherent inorganics and externally added inorganic compounds are summarized based on a literature search from the most recent 40 years. The TGA and larger-scale studies involving K-, Ca-, and Si-related mechanisms are critically reviewed with the aim of understanding the reaction mechanisms and kinetics. Differences between the reaction pathways of inorganic matter, and subsequent effects on the reactivity during gasification, are discussed. The present results illustrate the complexity of ash transformation phenomena, which have a strong impact on the design of gasifiers as well as further operation and process control. The impregnation and mixing of catalytic compounds into raw biomass are emphasized as a potential solution to avoid reactivity-related operational challenges during steam and CO2 gasification. This review clearly identifies a gap... [more]

The giant miscanthus (Miscanthus × giganteus) is one of the most essential energy plants. It also finds various alternative uses, including installing belts to prevent soil erosion. Biomass from such belts should be removed and rationally managed every year. The parameters of miscanthus biomass were investigated in terms of its suitability for combustion and anaerobic fermentation. Under the conditions of the experiment, miscanthus achieved a stable yield already in the second year of vegetation, mainly due to the high planting density. Energy parameters turned out to be typical for straw biomass (calorific value 18.06 MJ/kg). Relatively low ash melting temperatures (<1400 °C) and their chemical composition meant a high risk of contamination depositing on heating devices, which is often indicated as a shortcoming of biomass compared to hard coal. Miscanthus silage can be a valuable substrate for anaerobic digestion, but it requires a sufficiently early harvest, which affects the yie... [more]

The paper investigates the optimization of ecosystem services of podzolized heavy loamy chernozem (black soil) as a result of the cultivation of the perennial energy culture of Miscanthus x giganteus. The research was conducted on an experimental land plot during 2016−2021. No fertilization was applied to the soil during the experiments, and over the years of research, the growing seasons were accompanied by abnormal droughts, but even under such conditions, the plants of Miscanthus x giganteus gradually increased their yield. At the initial stage of research, in the third year of cultivation, dry biomass of Miscanthus x giganteus was obtained at 14.3 t/ha, in the fourth year−18.6 t/ha, and already in the fifth and sixth years, 21.7 and 24.5 t/ha, respectively. That is, energy-wise, the harvest for the last year was equivalent to 15.9 tons of coal or 12,618 m3 of natural gas. Cultivation of Miscanthus x giganteus on black soil for six years has improved the provision of its ecosystem s... [more]

Residential biomass combustion has been pointed out as one of the largest sources of atmospheric pollutants. Rising awareness of the environmental effects of residential biomass combustion emissions boosted the development of different emission reduction devices that are currently available on the market for small-scale appliances. However, detailed studies on the efficiency of these devices in different combustion systems available in Southern European countries are lacking. In this study, two pollution control devices (catalytic converter and electrostatic precipitator) were tested in two different combustion systems (batch mode operated woodstove and automatically fed pellet stove) in order to assess the emission reduction potential of the devices. Pine firewood was used to fuel the woodstove. One commercial brand of pellets and an agricultural fuel (olive pit) were taken for the experiments in the pellet stove. While the efficiency of the electrostatic precipitator in reducing PM10... [more]

Rapid climate change and forecasted damage from fossil fuel combustion, forced researchers to investigate renewable and clean energy sources for the sustainable development of societies throughout the world. Biomass-based energy is one of the most important renewable energy sources for meeting daily energy needs, which are gaining in popularity daily. Gasification-based bioenergy production is an effective way to replace fossil fuels and reduce CO2 emissions. Even though biomass gasification has been studied extensively, there is still much opportunity for improvement in terms of high-quality syngas generation (high H2/CO ratio) and reduced tar formation. Furthermore, the presence of tar has a considerable impact on syngas quality. Downdraft gasifiers have recently shown a significant potential for producing high-quality syngas with lower tar concentrations. This article presents a comprehensive review on the advancement in biomass downdraft gasification technologies for high-quality s... [more]

This work presents new data on the life cycle impact assessment of various lignocellulosic biomass types in Mexico. A comparative life cycle assessment model of biomass densification systems was conducted. An integrated approach that incorporated various process variables, such as technology and variations in feed properties, within the analysis was employed to evaluate the environmental impact of producing 1 MJ of energy-containing densified fuel. The results show that the densification unit and curing (fuel drying) have the highest impact on the life cycle’s operational energy and the total life cycle energy, respectively. Of all the 33 biomass types from the 17 species sources considered in this study, sweet sorghum and sandbur grass have the highest global warming potential, 0.26 and 0.24 (kg CO2-eq), and human toxicity 0.58 and 0.53 (kg 1,4-dichlorobenzene-eq), respectively, while coffee pulp and cooperi pine wood have the least impact in both categories, with values of 0.08 and 0... [more]

Currently, hydrogen energy is the most promising energy vector, while gasification is one of the major routes for its production. However, gasification suffers from various issues, including slower carbon conversion, poor syngas quality, lower heating value and higher emissions. Multiple factors affect gasification performance, such as the selection of gasifiers, feedstock’s physicochemical properties and operating conditions. In this review, the status of gasification, key gasifier technologies and the effect of solid-fuel (i.e., coal, biomass and MSW) properties on gasification performance are reviewed critically. Based on the current review, the co-gasification of coal, biomass and solid waste, along with a partial utilisation of CO2 as a reactant, are suggested. Furthermore, a technological breakthrough in carbon capture and sequestration is needed to make it industrially viable.

The combustion of waste biomass is becoming a key challenge for the energy sector, especially in times of growing energy demand and increasing environmental awareness of society. Processing such fuels is usually demanding. Mathematical modeling makes it possible to adapt the course of the process. The best option is to use appropriate fuel mixtures. The aim of this work was to develop a simple model that would allow the pre-selection of the mixture of two types of digestate. Residues from methane fermentation of maize and apple pomace were used in the study. The paper presents both a mathematical model and laboratory tests. The practical part was to check the validity of the model estimates. The model works on the basic data from physicochemical analysis. Laboratory tests included combustion of the samples of different mixtures. We used image analysis of thermograms to determine changes during combustion, which allowed us to determine when and where the main combustion occurs. Results... [more]

This paper presents results that show the effect of hydrothermal carbonization and subsequent cold plasma jet treatment with helium and argon on the structure and sorption properties of a material—spent brewery grain. Treatment of activated carbon, with a cold atmospheric plasma jet, was used comparatively. The effect of activation on the pore structure of the materials was carried out by the volumetric method at low pressure (N2, 77 K). The specific surface area as well as the total pore volume, average pore size, and pore size distribution were determined using different theoretical models. A high improvement in the sorption capacity parameter was obtained for hydrochars after cold atmospheric plasma jet treatment with an increase of 7.5 times (using He) and 11.6 times (using Ar) compared with hydrochars before cold atmospheric plasma jet treatment. The increase in specific surface area was five-fold (He) and fifteen-fold (Ar). For activated carbon, such a large change was not obtain... [more]

Alkali metal compounds are released during the thermal conversion of biofuels and fossil fuels and have a major impact on the efficiency of conversion processes. Herein, we describe a novel method for the simultaneous characterization of alkali release and mass loss from materials used in combustion and gasification processes including solid fuels, fluidized bed materials, and catalysts for gas reforming. The method combines the thermogravimetric analysis of selected samples with the on-line measurement of alkali release using a surface ionization detector. The technique builds on the careful treatment of alkali processes during transport from a sample to the downstream alkali monitor including the losses of alkali in the molecular form to hot walls, the formation of nanometer-sized alkali-containing particles during the cooling of exhaust gases, aerosol particle growth, and diffusion losses in sampling tubes. The performance of the setup was demonstrated using biomass samples and flui... [more]

TG/FT-IR techniques, UV-spectroscopy, microwave extraction, XRD and SEM were used to study how densification of the three types of agricultural biomass wastes (wheat straw, soft wood, and sunflower husk) changes the composition and structure of their pyrolysis products. It was determined that densification changes the composition of volatile products of pyrolysis at the temperature of 420 °C: sunflower husk emits 4.9 times less saturated and unsaturated hydrocarbons and 1.9 times less compounds with carbonyl group; soft wood emits 1.8 times more saturated and unsaturated hydrocarbons and compounds with carbonyl groups and 1.3 times more alcohols and phenols; and wheat straw emits 2 times more compounds with carbonyl groups. These changes are probably caused by the differences in interaction of formed volatiles with the surface of chars. These differences can be caused by distinct places of cumulation of inorganic components in the densified samples. In the densified char, the inorganic... [more]

The conversion of biomass to olefin by employing gasification has recently gained the attention of the petrochemical sector, and syngas composition is a keystone during the evaluation of process design. Process simulation software is a preferred evaluation tool that employs stoichiometric and kinetic approaches. Despite the available literature, the estimation errors of these simulation methods have scarcely been contrasted. This study compares the errors of stoichiometric and kinetic models by simulating a downdraft steam gasifier in PRO/II. The quantitative examination identifies the model that best predicts the composition of products for the gasification of Japanese wood waste. The simulation adopts reaction mechanisms, flowsheet topology, reactions parameters, and component properties reported in the literature. The results of previous studies are used to validate the models in a comparison of the syngas composition and yield of products. The models are used to reproduce gasificat... [more]

Charcoal is produced in large quantities in the Portuguese region of Alentejo mainly using traditional brick kilns. Information about this type of carbonization technology is scarce, which makes it urgent to characterize the process as a starting point for performance improvements. In this context, this study aims to characterize the operation of a cylindrical brick kiln (≈80 m3) during regular wood carbonization cycles. Relevant process parameters were monitored along with the yields and/or composition of the main products (carbonization gas, charcoal, and charcoal fines) to evaluate the mass balance of the process. The results show that the bulk of the kiln operates at temperatures below 300 °C, which greatly limits the quality of the charcoal. For instance, the fixed carbon content of charcoal can easily be as low as 60 wt.%. The yield of charcoal is also low, with values below 25 wt.% of dry wood feed. This means that significant quantities of by-products are generated in the proce... [more]

This work evaluates the effect of feedstock type and composition on the conversion of lignin to liquid by solvolysis with formic acid as hydrogen donor (LtL), by analyzing the yields and molecular composition of the liquid products and interpreting them in terms of both the type and the preprocessing of the lignocellulosic biomass using chemometric data analysis. Lignin samples of different types and purities from softwood, hardwood, and grasses (rice straw and corn stover) have been converted to bio-oil, and the molecular composition analyzed and quantified using GC-MS. LtL solvolysis was found to be a robust method for lignin conversion in terms of converting all samples into bio-oils rich in phenolic compounds regardless of the purity of the lignin sample. The bio-oil yields ranged from 24−94 wt.% relative to lignin input and could be modelled well as a function of the elemental composition of the feedstock. On a molecular basis, the softwood-derived bio-oil contained the most guaia... [more]

Biomass gasification is a versatile thermochemical process that can be used for direct energy applications and the production of advanced liquid and gaseous energy carriers. In the present work, the results are presented concerning the H2 production at a high purity grade from biomass feedstocks via steam/oxygen gasification. The data demonstrating such a process chain were collected at an innovative gasification prototype plant coupled to a portable purification system (PPS). The overall integration was designed for gas conditioning and purification to hydrogen. By using almond shells as the biomass feedstock, from a product gas with an average and stable composition of 40%-v H2, 21%-v CO, 35%-v CO2, 2.5%-v CH4, the PPS unit provided a hydrogen stream, with a final concentration of 99.99%-v and a gas yield of 66.4%.

Renewable energy consumption is the call by United Nation Sustainable Development Goals, and sustainable consumption is the only solution for the future. This study found that the solution to the framed problem has a requirement to categorize the green consumer value parameters in hierarchy of importance for five specific RESs and their alignment with environment policy based on a comparison of Poland and India. The study revealed the importance of each criterion for renewable energy sources providing, a comparative table of Poland and India. The methodological approach used secondary data for selecting countries, and primary data are used for statistical analysis of Automatic Linear Modelling. The research concludes that the CRITERIA4 is one of the most important that emerged with all five RESs for Poland and three RESs for India. Both countries are aligned with the UN sustainable development goals and are switching over to all means of sustainability. Poland scores a higher value of... [more]

Pellets are solid biofuels with a combustion efficiency of 85−90%, low CO2 emissions and costs, great comfort and versatility. However, the ash generated during combustion can present sintering and fusibility, decreasing boiler efficiency and potentially malfunctioning. Ash composition indexes can be useful to predict observed ash sintering and fusion but require further analysis for a variety of feedstocks. The objective of this work was to determine the effect of the mineral composition of pellet ash from 15 biomasses of forest and agro-industrial sources on observed pellet ash slagging using a laboratory test. The chemical composition of pellets and the indexes B, NaK/B, SiP/CaMg and SiPNaK/CaMg at 550 and 1000 °C were determined. Pearson correlation tests were also performed between cumulative percentages of slag at different sieve sizes. The concentrations of CaO ranged from 4.49 to 65.95%, MgO varied from 1.99 to 17.61%, and the SiO2 concentration was between 16.11 and 28.24% and... [more]

When designing biomass-to-biofuel supply chains, the biomass uncertainty, seasonality and geographical dispersion that affect economic viability need to be considered. This work presents a novel methodology that can optimize the design of biofuel supply chains by adopting a decentralized network structure consisting of a mix of fixed and mobile processing facilities. The model considers a variable biomass yield profile and the mobile fast pyrolysis technology. The mixed-integer linear programming model developed identifies the optimal biofuel production and biomass harvesting schedule schemes under the objective of profit maximization. It was applied in the case study of marginal lands in Scotland, which are assumed to be planted with Miscanthus. The trade-offs observed between economies of scale against the transportation costs, the effect of the relocation costs and the contribution of storage capacity were investigated. The results showed that, in most cases, harvesting is most conc... [more]

The pH and substrate-to-inoculum ratio (S/I) are important parameters in the anaerobic fermentation of agroindustrial residues, and therefore the optimization of these two parameters is needed for a stable, efficient, and sustainable reactor operation. In this work, the parameters pH (5−9) and S/I (0.5−3 gVS gVS−1) were optimized to produce biobased volatile fatty acids (VFAs) from hydrothermally pretreated olive mill solid waste (HPOMSW). The response variables evaluated in the Doehlert design were total VFAs concentration (tVFAs) (mg L−1) and amounts (%) of isobutyric, butyric, isovaleric, and valeric acids on the VFAs profile. The pH was the variable that most influenced the mixed culture fermentation of HPOMSW, proving to be a key parameter in the process. Microbial community analyses of conditions 1 (S/I = 3 gVS gVS−1 and pH = 7) and 4 (S/I = 1.13 gVS gVS−1 and pH = 5) showed that Proteobacteria and Firmicutes accounted for more than 87% of the total microorganisms identified for... [more]

One of the unconventional, innovative ways of using biomass is using it as a component of high-energy material. According to conceptual assumptions, biomass can act as an energy carrier in modified high-energy materials-explosives (EX). Modification of the composition of the explosive requires the development of a method of introducing an additional component and changes its explosive and operational parameters (including safety). Thermodynamic calculation programs allow you to model the predicted energetic parameters of an explosive in order to select prospective compositions without the need to carry out a large number of costly and time-consuming field tests. This enables more effective design of new explosives compositions by narrowing down the scope of field tests using the “in situ” method. The use of renewable biomass as a corrector of EX properties may be a pro-environmental approach and reduces the production costs of the product. The thermodynamic simulations performed showed... [more]

Experimental studies have shown that bioethanol production from biomass sources has been reported to be influenced by several process parameters. It is not entirely known, however, how the interaction of these factors affects the concentration of bioethanol production. In this study, the use of Gaussian Process Regression (GPR) in predictive modeling of bioethanol production from fountain grass has been investigated. Parametric analysis showing the interaction effect of time, pH, temperature, and yeast extract on the bioethanol production was examined. The effect of kernel functions on the performance of the GPR in modeling the prediction of bioenergy output was also examined. The study shows that the kernel function, namely, rotational quadratic (RQGPR), squared exponential (SEGPR), Matern 5/2 (MGPR), exponential (EGPR), and the optimizable (Opt.GPR.), had varying effects on the performance of the GPR. Coefficients of determination (R2) of 0.648, 0.670, 0.667, 0.762, and 0.993 were ob... [more]

Micro-cogeneration (micro-combined heat and power) is a technology that simultaneously produces decentralized thermal and electrical energy with a power of less than 50 kWel. This technology consists of using the waste heat generated by a thermodynamic process to meet the heating and hot water demands of buildings. The use of biomass as a fuel offers important advantages: use of a renewable energy, carbon neutrality, availability, and low cost. Furthermore, the analysis and optimization of hybrid energy systems, which include existing micro-cogeneration systems powered by renewable energy, is a scientific challenge needing experimental characterization of such micro-cogeneration systems. In this context, a biomass Stirling micro-CHP unit (μCHP), was tested to characterize its energy performance. A dynamic model based on these experimental investigations was developed to evaluate its thermal power output and energy efficiencies. The dependence of the nominal load on the water flow rate... [more]

The present work focuses on the quality of char and primary tar produced from fast pyrolysis in N2 and CO2 of lignocellulosic biomasses: walnut shells (lignin-rich), straw (hemicellulose-rich) and pinewood (cellulose-rich). Heat treatments are carried out in a heated strip reactor (HSR) at 1573 and 2073 K for 3 s, with a heating rate of 104 K/s. The equipment allows for quenching the volatiles as soon as they are emitted. Chars are analyzed by thermogravimetric analysis in air. Results are compared with the products obtained from raw lignin, pure cellulose and pure hemicellulose. Cellulose and hemicellulose tars are dominated by anhydrous monosaccharides, which are scarce in straw tar and abundant in walnut shells tar. Polycyclic aromatic hydrocarbons PAHs are present in the primary products, in particular for walnut shells. The most reactive char is the one obtained from straw and the least reactive is the walnut shells char. Severe heat treatment and a CO2 atmosphere generate additio... [more]

In this article, we present the possibility of applying the concept of elasticity in the system of sustainable energy development through the use of wood biomass. We used a dual (socio-ecological and economic) approach to sustainable energy development. The research was carried out using the methods of reduction reasoning, scientific observation, and examination of source documents. We identified crisis threats in the context of sustainable energy development. Then, we analyzed the supply of wood biomass in Poland, taking into account its geographical location. As a result, we identified and characterized the causal relationships between the assumptions of the concept of resistance and the sustainable development of energy with the use of wood biomass. We found that the concepts of resilience can be adapted to assessing energy sustainability. This adaptation is based on resilience, flexibility, and strategic ability to revitalize the country. We found that five key threats (extreme wea... [more]