Producing high-fidelity real-time simulations of neutron diffusion in a reactor is computationally extremely challenging, due, in part, to multiscale behaviour in energy and space. In many scientific fields, including nuclear modelling, the application of reduced-order modelling can lead to much faster computation times without much loss of accuracy, paving the way for real-time simulation as well as multi-query problems such as uncertainty quantification and data assimilation. This paper compares two reduced-order models that are applied to model the movement of control rods in a fuel assembly for a given temperature profile. The first is a standard approach using proper orthogonal decomposition (POD) to generate global basis functions, and the second, a new method, uses POD but produces global basis functions that are local in the parameter space (associated with the control-rod height). To approximate the eigenvalue problem in reduced space, a novel, nonlinear interpolation is propo... [more]

In a wireless power transfer (WPT) system, the power transfer efficiency (PTE) decreases sharply with the increase in transfer distance. Metamaterials (MMs) have shown great potential to enhance PTE in mid-range WPT systems. In this paper, we propose two MM slabs of a 3 × 3 array to enhance the magnetic coupling. The MM unit cell was designed by using square spiral patterns on a thin printed circuit board (PCB). Moreover, the asymmetric four-coil WPT system was designed and built based on the practical application scenario of wireless charging for unmanned devices. The simulation and experimental results show that two MM slabs can enhance power transmission capability better than one MM slab. By optimizing the position and spacing of two MM slabs, the PTE was significantly improved at a mid-range distance. The measured PTEs of a system with two MM slabs can reach 72.05%, 64.33% and 49.63% at transfer distances of 80, 100 and 120 cm. When the transfer distance is 100 cm, the PTE of a sy... [more]

The present work considers the dramatic changes the COVID-19 pandemic has brought to the global economy, with particular emphasis on energy. Focusing on the European Union, the article discusses the opportunities policy makers can implement to reduce the climate impacts and achieve the Paris Agreement 2050 targets. The analysis specifically looks at the fossil fuels industry and the future of the fossil sector post COVID-19 pandemic. The analysis first revises the fossil fuel sector, and then considers the need for a shift of the global climate change policy from promoting the deployment of renewable energy sources to curtailing the use of fossil fuels. This will be a change to the current global approach, from a relative passive one to a strategically dynamic and proactive one. Such a curtailment should be based on actual volumes of fossil fuels used and not on percentages. Finally, conclusions are preliminary applied to the European Union policies for net zero by 2050 based on a two-... [more]

This article presents a high-performance lead-free piezoelectric energy harvester (LPEH) system for magnetic field. It based on a Ba0.85Ca0.15Ti0.90Zr0.10O3 + CuO 0.3 wt% (BCTZC0.3) composite was fabricated by sintering at 1450 °C. The BCTZC0.3 composite, which has an enhanced high energy conversion constant (d33×g33), shows improved piezoelectric power-generation performance when compared with conventional piezoelectric energy harvesters. The BCTZC0.3-based LPEH produces instantaneous maximum power of 8.2 mW and an energy density of 107.9 mW/cm3 in a weak magnetic field of 250 μT. This system can be used to charge a capacitor and operate a wireless sensor network (WSN) system to provide temperature sensing and radio-frequency (RF) transmission in a 250 μT magnetic field. The proposed LPEH is a promising green-energy device for potentially self-powering WSN systems when applied.

Ukraine is an energy-dependent country, with less that 50% of its energy consumption fulfilled by its own resources. Natural gas is of paramount importance, especially for industry and society. Therefore, there is an urgent need to search for alternative and potential energy sources, such as gas hydrate deposits in the Black Sea, which can reduce the consumption of imported gas. It is necessary to refine the process parameters of the dissociation of gas hydrate deposits with a heterogeneous structure. The analyzed known geological−geophysical data devoted to the study of the offshore area and the seabed give grounds to assert the existence of a significant amount of hydrate deposits in the Black Sea. An integrated methodological approach is applied, which consists of the development of algorithms for analytical and laboratory studies of gas volumes obtained during the dissociation of deposits with a heterogeneous structure. These data are used for the computer modelling of the dissocia... [more]

The development of a numerical model and design for the innovative construction of a heat exchanger (HE) used in a condensation hood (being a part of the combi-steamer) are described in this work. The model covers an air-steam flow, heat transfer, and a steam condensation process. The last two processes were implemented with the use of an in-house model introduced via User Defined Functions (UDF). As the condensate volume is negligible compared to the steam, the proposed model removes the condensate from the domain. This approach enabled the usage of a single-phase flow for both air and steam using a species transport model. As a consequence, a significant mesh and computation time reduction were achieved. The new heat exchanger is characterised by reorganised fluid flow and by externally finned pipes (contrary to the original construction, where internally finned pipes were used). This allowed a reduction in the number of the pipes from 48 to 5, which significantly simplifies construc... [more]

In this article, the performance of double corrugated tubes applied in a tube-in-shell heat exchanger is analysed and compared to the performance of a heat exchanger equipped with straight tubes. The CFD (computational fluid dynamics) analysis was performed considering a turbulent flow regime at several mass flow rates. It is observed that the double corrugated geometry does not have a significant impact on the pressure drop inside the analysed heat exchanger, while it has the potential to increase its thermal performance by up to 25%. The ε−NTU (effectiveness−number of transfer units) relation also demonstrates the advantage of using double corrugated tubes in tube-in-shell heat exchangers over straight tubes.

This paper presents research on the combustion and emission characteristics of a four-stroke Natural gas−Diesel dual-fuel marine engine at full load. The AVL FIRE R2018a (AVL List GmbH, Graz, Austria) simulation software was used to conduct three-dimensional simulations of the combustion process and emission formations inside the engine cylinder in both diesel and dual-fuel mode to analyze the in-cylinder pressure, temperature, and emission characteristics. The simulation results were then compared and showed a good agreement with the measured values reported in the engine’s shop test technical data. The simulation results showed reductions in the in-cylinder pressure and temperature peaks by 1.7% and 6.75%, while NO, soot, CO, and CO2 emissions were reduced up to 96%, 96%, 86%, and 15.9%, respectively, in the dual-fuel mode in comparison with the diesel mode. The results also show better and more uniform combustion at the late stage of the combustions inside the cylinder when operatin... [more]

In this manuscript, the high-accuracy stator currents tracking issue is considered for a six-phase induction motor subject to external perturbations and uncertainties due to unmeasurable rotor currents and electrical parameter variations. To achieve the control goals, the common two-cascade controllers structure is required for this type of motor. The first controller in the outer loop consists of a proportional integral to regulate the speed. Then, the second is the proposed inner nonlinear stator currents controller based on a robust discrete-time terminal super-twisting algorithm supported by the time-delay estimation method. For the design procedure, the discrete-time stator currents dynamics are derived; for example, the vector of the matched perturbations and unmeasurable rotor currents are specified to simplify the estimation. A detailed stability analysis of the closed-loop error dynamics using Lyapunov theory is given. Finally, a real asymmetrical six-phase induction motor is... [more]

The mutualistic interactions between the oleaginous yeast Lipomyces starkeyi and the green microalga Chloroidium saccharophilum in mixed cultures were investigated to exploit possible synergistic effects. In fact, microalga could act as an oxygen generator for the yeast, while the yeast could provide carbon dioxide to microalga. The behavior of the two microorganisms alone and in mixed culture was studied in two synthetic media (YEG and BBM + G) before moving on to a real model represented by the hydrolysate of Arundo donax, used as low-cost feedstock, and previously subjected to steam explosion and enzymatic hydrolysis. The overall lipid content and lipid productivity obtained in the mixed culture of YEG, BBM + G and for the hydrolysate of Arundo donax were equal to 0.064, 0.064 and 0.081 glipid·gbiomass−1 and 30.14, 35.56 and 37.22 mglipid·L−1·day−1, respectively. The mixed cultures, in all cases, proved to be the most performing compared to the individual ones. In addition, this stu... [more]

The continued growth and evolving lifestyles of the human population require the urgent development of sustainable production in all its aspects. Microalgae have the potential of the sustainable production of various commodities; however, the energetic requirements of algae cultivation still largely contribute to the overall negative balance of many operation plants. Here, we evaluate energetic efficiency of biomass and lipids production by Chlorella pyrenoidosa in multi-tubular, helical-tubular, and flat-panel airlift pilot scale photobioreactors, placed in an indoor environment of greenhouse laboratory in Central Europe. Our results show that the main energy consumption was related to the maintenance of constant light intensity in the flat-panel photobioreactor and the culture circulation in the helical-tubular photobioreactor. The specific power input ranged between 0.79 W L−1 in the multi-tubular photobioreactor and 6.8 W L−1 in the flat-panel photobioreactor. The construction of m... [more]

The increasing penetration of electrical vehicles (EVs), on the way to decarbonizing the transportation sector, presents several challenges and opportunities for the end users, the distribution grid, and the electricity markets. Uncontrollable EV charging may increase peak demand and impact the grid stability and reliability, especially in the case of non-interconnected microgrids such as the distribution grids of small islands. On the other hand, if EVs are considered as flexible loads and distributed storage, they may offer Vehicle to Grid (V2G) services and contribute to demand-side management through smart charging and discharging. In this work, we present a study on the penetration of EVs and the flexibility they may offer for services to the grid, using a genetic algorithm for optimum valley filling and peak shaving for the case of a non-interconnected island where the electricity demand is several times higher during the summer due to the influx of tourists. Test cases have been... [more]

Many islands around the world present considerable energy supply problems, while their energy mixture is controlled by oil products. Meanwhile, several of these isolated islands enjoy excellent RES potential that support actions to maximize RES integration. In order to ameliorate energy supply security and energy autonomy of the Aegean Archipelagos Greek islands, an integrated solution is deployed based on the exploitation of the existing RES potential in conjunction with the application of an appropriate energy storage scheme, as well as complementary smart-grid elements. The proposed solution has been applied for the Greek Tilos island in the framework of the Tilos-Horizon 2020 program. In this context, the implementation of the integrated Tilos energy solution under the current local legislative frame is a great success story introducing several important innovative characteristics in the European market, like the combined operation of a wind turbine and a PV installation, the appli... [more]

The Zn(II) and Mn(II) removal by an ion flotation process from model and real dilute aqueous solutions derived from waste batteries was studied in this work. The research aimed to determine optimal conditions for the removal of Zn(II) and Mn(II) from aqueous solutions after acidic leaching of Zn-C and Zn-Mn waste batteries. The ion flotation process was carried out at ambient temperature and atmospheric pressure. Two organic compounds used as collectors were applied, i.e., m-dodecylphosphoric acid 32 and m-tetradecylphosphoric 33 acid in the presence of a non-ionic foaming agent (Triton X-100, 29). It was found that both compounds can be used as collectors in the ion flotation for Zn(II) and Mn(II) removal process. Process parameters for Zn(II) and Mn(II) flotation have been established for collective or selective removal metals, e.g., good selectivity coefficients equal to 29.2 for Zn(II) over Mn(II) was achieved for a 10 min process using collector 32 in the presence of foaming agent... [more]

Global warming requires a changeover from fossil fuel based to renewable energy sources on the electrical supply side and electrification of the demand side. Due to the transient nature of renewables and fluctuating demand, buffer capacities are necessary to compensate for supply/demand imbalances. Battery energy storage systems are promising. However, the initial costs are high. Repurposing electric vehicle batteries can reduce initial costs. Further, storage design optimization could significantly improve costs. Therefore, a battery control algorithm was developed, and a simulation study was performed to identify the optimal storage design and its economic potential. The algorithm used is based on autonomous (on-site) optimization, which relies on an incentive determining the operation mode (charge, discharge, or idle). The incentive used was the historic day-ahead stock market price for electricity, and the resulting potential economic gains for different European countries were com... [more]

Formic acid is a liquid organic hydrogen carrier giving hydrogen on demand using catalysts. Metal complexes are known to be used as efficient catalysts for the hydrogen production from formic acid decomposition. Their performance could be better than those of supported catalysts with metal nanoparticles. However, difficulties to separate metal complexes from the reaction mixture limit their industrial applications. This problem can be resolved by supporting metal complexes on the surface of different supports, which may additionally provide some surface sites for the formic acid activation. The review analyzes the literature on the application of supported metal complexes in the hydrogen production from formic acid. It shows that the catalytic activity of some stable Ru and Ir supported metal complexes may exceed the activity of homogeneous metal complexes used for deposition. Non-noble metal-based complexes containing Fe demonstrated sufficiently high performance in the reaction; howe... [more]

This article presents the results of noise tests, measurements and proposals of solutions that have an impact for reducing noise at one of the Jastrzębska Spółka Węglowa S.A. mines. All units and workstations at the mechanical coal processing plant were tested. Coal enrichment, aimed at adjusting its quality parameters to the requirements of various customers, is considered as a stage of mineral resources management. The adaptation of the quality of commercial coal products to the needs of specific customers consists in removing useless components from the excavated material. The processes of coal processing are carried out on various machines, the power of which reaches several dozen kilowatts. The energy of these machines, in addition to the useful power, is converted into heat, friction and noise. From the energy point of view, noise is not important, but it is very harmful to employees. The issue of noise pollution, although very dangerous to employees’ health, is often underestima... [more]

A reliable prediction of sustainable energy consumption is key for designing environmentally friendly buildings. In this study, three novel hybrid intelligent methods, namely the grasshopper optimization algorithm (GOA), wind-driven optimization (WDO), and biogeography-based optimization (BBO), are employed to optimize the multitarget prediction of heating loads (HLs) and cooling loads (CLs) in the heating, ventilation and air conditioning (HVAC) systems. Concerning the optimization of the applied algorithms, a series of swarm-based iterations are performed, and the best structure is proposed for each model. The GOA, WDO, and BBO algorithms are mixed with a class of feedforward artificial neural networks (ANNs), which is called a multi-layer perceptron (MLP) to predict the HL and CL. According to the sensitivity analysis, the WDO with swarm size = 500 proposes the most-fitted ANN. The proposed WDO-ANN provided an accurate prediction in terms of heating load (training (R2 correlation =... [more]

Settings of protection are essential to ensure the sensitivity and selectivity needed to detect defects. Making the correct settings requires the calculation of the fault currents with as little error as possible. Fault currents are influenced by the parameters of the electrical networks, including the state of the insulation and the Petersen coil, which changes during their operation electrical networks. This paper analyzes how the insulation parameters of medium voltage power lines, the parameters of the Petersen coil used to treat the neutral of the medium voltage electrical network and the value of the resistance at the fault location influence the fault current in the case of a single-phase fault. The large number of single-phase faults that occur in medium voltage electrical networks justifies this analysis. The symmetrical components method was used to calculate the fault current. The results obtained by calculation were verified experimentally by causing a single-phase-to-groun... [more]

The effect of drying temperature and the application of ultrasound on drying kinetics of Lawsonia inermis (henna) leaves and the extraction of lawsone from the dried samples was addressed. Indeed, henna leaves were dried with and without the application of ultrasound (21.7 kHz, 30.8 kW/m3) at 40, 50 and 60 °C with a constant air velocity (1 m/s). As expected, both the increase of temperature and the application of ultrasound decreased the drying time and increased the rate of extraction of the lawsone. The values of the effective diffusion coefficients obtained were used to quantify this influence showing the value increases with higher drying temperature and the application of ultrasound. Moreover, the influence of temperature was quantified by the estimation of the activation energy from an Arrhenius-type equation (46.25 kJ/mol in the case of drying without ultrasound application and 44.06 kJ/mol in the case of ultrasonically-assisted drying). Regarding the influence of studied varia... [more]

The building sector is the largest consumer of energy, but there are still major scientific challenges in this field. The façade, being the interface between the exterior and interior space, plays a key role in the energy efficiency of a building. In this context, this paper focuses on a ventilated bioclimatic wall for nearly zero-energy buildings (NZEB). The aim of this study is to investigate an experimental setup based on a hot box for the characterization of the thermal performances of the ventilated wall. A specific ventilated prototype and an original thermal metrology are developed. This paper presents the ventilated prototype, the experimental setup, and the experimental results on the thermal performances of the ventilated wall. The influence of the air space thickness and the air flow rate on the thermal performances of the ventilated wall is studied.

In the dual-motor torque synchronization system fed by an indirect matrix converter (IMC), a finite set model predictive control (FCS-MPC) strategy based on a standard quadratic cost function was proposed to solve the open-loop problem of the torque synchronization error in a traditional closed-loop control strategy. Through the unified modeling of a dual-motor system, the torque synchronization error as a new state variable was involved in the switching state selection of the inverter stages, and the space vector modulation method was still used in the rectifier stage. At the same time, based on the unified prediction model, the auxiliary diagonal matrix was constructed, and the weight coefficients were solved offline by using the Lyapunov stability theory to ensure the convergence of each error term in the continuous control period. The proposed FCS-MPC strategy not only solves the problem of weight coefficient setting, but also makes it possible for a multi-motor synchronization sys... [more]

In Thailand, Napier grass is expected to play an important role as an energy resource for future power generation. To accomplish this goal, numerous areas are required for Napier grass plantations. Before introducing crops, the land potential of the country and the impact of crops on the environment should be assessed. The soil and water assessment tool (SWAT) model is very useful in investigating crop impacts and land potential. Unfortunately, the crop growth parameters of Napier grass are yet to be identified and, thus, conducting effective analysis has not been possible. Accordingly, in this study, parameter calibration and SWAT model validation of Napier grass production in Thailand was carried out using datasets from eight sites with 93 samples. Parameter sensitivity analysis was performed prior to parameter calibration, the results of which suggest that the radiation use efficiency and potential harvested index are both highly sensitive. The crop growth parameters were calibrated... [more]

This article substantiates the need to find and implement innovative tools to improve the efficiency of the domestic system for energy sector control. The authors determined that energy policy renewal should consider Ukraine’s commitments to transition to a carbon-neutral economy. The systematization of scientific achievements shows that one of the priority tasks is to minimize the gaps in the energy efficiency of the national economy. It is established that, despite the significant scientific achievements in this area, the scientific community has not adopted a single approach to assessing energy efficiency yet. The purpose of this article is to assess the energy efficiency gaps in the national economy, in order to identify their peak values and the factors causing them, and appropriate mechanisms to minimize them. The energy efficiency gaps are assessed using frontal analysis and Shepard’s energy distance function. Analytical data from the World Bank, the Swiss Institute of Economics... [more]

Although one of the most harmful factors to health is noise, it is often ignored in life cycle assessment (LCA) studies. Most researches regarding noise inclusion in LCA focus on the problem of transport noise, and very few works consider the impact of noise emitted by other sources. This study addresses the effects of noise generated by cogeneration plants. The main objective is to assess the environmental performance of the noise reduction system by considering the health effects of noise due to steam discharge as well as to compare the environmental loss associated with the production and disposal of a steam silencer with the benefits resulting from its application for noise reduction. A method to determine midpoint and endpoint human health indicators for a composition of noise emitted by intermittent stationary source and background noise is developed. The results indicate that the health benefit due to noise reduction is six orders of magnitude greater than the environmental loss... [more]