Pollutant emissions have been a topic of interest in the last decades. Not only environmentalists but also governments are taking rapid action to reduce emissions. As one of the main contributors, the transport sector is being subjected to strict scrutiny to ensure it complies with the short and long-term regulations. The measures imposed by governments clearly involve all the stakeholders in the logistics sector, from road authorities and logistic operators to truck manufacturers. The improvement of traffic conditions is one of the perspectives in which the reduction of emissions is being addressed. Optimization of traffic flow, avoidance of unnecessary stops, control of the cruise speed, and coordination of trips in an energy-efficient way are necessary steps to remain compliant with the upcoming regulations. In this study, we have estimated the CO2 and NOx emissions in heavy-duty vehicles while traversing signalized intersections, and we examined the differences between various beha... [more]

This paper presents the theoretical analysis and experimental verification of a direct fault harmonic identification approach in a converter-fed electric drive for automated diagnosis purposes. On the basis of the analytical model of the proposed real-time direct fault diagnosis, the fault-related harmonic component is calculated using recursive DFT (RDFT) and Goertzel DFT (GDFT), applied instead of the full spectrum calculations required in the most popular FFT algorithm. The simulation model of an inverter sensorlessly controlled induction motor drive is linked with the induction machine rotor fault model for testing the sensitivity of the GDFT- and RDFT-based fault diagnosis to state variable estimation errors. According to the presented simulation results, the accuracy of the direct identification of a fault-related harmonic is sensitive to the quality of fault harmonic frequency estimation. The sensitivity analysis with respect to RDFT and GDFT algorithms is included. Based on the... [more]

This paper comprehensively reviews the current status of multidisciplinary technologies in electric vehicles. Because the electric vehicle market will expand dramatically in the coming few years, research accomplishments in power electronics technology for electric vehicles will be highly attractive. Challenges in power electronics technology for driving electric vehicles, charging batteries, and circuit topologies are being explored. This paper aims primarily to address the practical issues of the future electric vehicles and help researchers obtain an overview of the latest techniques in electric vehicles, focusing on power electronics-based solutions for both current and future electric vehicle technologies. In this work, different medium-and high-voltage DC-AC inverter topologies are investigated and compared in terms of power losses and component requirements. Recent research on electric vehicle power converters is also discussed, with highlighting on soft-switching and multilevel... [more]

In this study, Response Surface Methodology (RSM) and multi-objective genetic algorithm were used to obtain optimum parameters of the channels with frustum of a cone with better flow and heat transfer performance. Central composite face-centered design (CCF) was applied to the experimental design of the channel parameters, and on this basis, the response surface models were constructed. The sensitivity of the channel parameters was analyzed by Sobol’s method. The multi-objective optimization of the channel parameters was carried out with the goal of achieving maximum Nusselt number ratio (Nu/Nu0) and minimum friction coefficient ratio (f/f0). The results show that the root mean square errors (RSME) of the fitted response surface models are less than 0.25 and the determination coefficients (R2) are greater than 0.93; the models have high accuracy. Sobol’s method can quantitatively analyze the influence of the channel parameters on flow and heat transfer performance of the channels. When... [more]

The permanent magnet synchronous motor (PMSM) is a highly efficient energy saving machine. Due to its simple structural characteristics, good heat radiation capability, and high efficiency, PMSMs are gradually replacing AC induction motors in many industrial applications. The PMSM has a nonlinear system and lies on parameters that differ over time with complex high-class dynamics. To achieve the excessive performance operation of a PMSM, it essentially needs a speed controller for providing accurate speed tracking, slight overshoot, and robust disturbance repulsion. Therefore, this article provides an overview of different robust control techniques for PMSMs and reviews the implementation of a speed controller. In view of the uncertainty factors, such as parameter perturbation and load disturbance, the H∞ robust control strategy is mainly reviewed based on the traditional control techniques, i.e., robust H∞ sliding mode controller (SMC), and H∞ robust current controller based on Hamilt... [more]

In this paper, a low-concentration photovoltaic/thermal (LCPV/T) coupled with air-source heat pump (AHP) system is proposed which fully utilizes the heat generated by LCPV/T and improves the performance of the AHP. The system is built and investigated in the Transient System Simulation Program (TRNSYS) and an experimental room model is established to verify the feasibility of the system. The performance of the system is researched from the perspective of energy and exergy, and the system performance with LCPV/T and without LCPV/T is compared. Finally, the influence of the variation of key parameters of the system is studied. The results indicated that on the coldest day, the electrical efficiency of LCPV/T reached 10% which was equal to the electrical exergy efficiency. The maximum thermal efficiency was 31.88% while thermal exergy efficiency was 2.7%. The maximum coefficient of performance (COP) of AHP was 3.3, and the thermal exergy efficiency was 47%. The indoor temperature was main... [more]

Light-emitting diodes based on quantum dots as an active emission can be considered as a promising next generation for application in displays and lighting. We report a theoretical investigation of green emission at 550 nm of microcavity inorganic−organic light-emitting devices based on Zn (Te, Se) alloy quantum dots as an active layer. Distributed Bragg Reflector (DBR) has been applied as a bottom mirror. The realization of high-quality DBR consisting of both high and low refractive index structures is investigated. The structures applied for high refractive index layers are (ZrO2, SiNx, ZnS), while those applied for low index layers are (Zr, SiO2, CaF2). DBR of ZnS/CaF2 consisting of three pairs with a high refractive index step of (Δn = 0.95) revealed a broad stop bandwidth (178 nm) and achieved a high reflectivity of 0.914.

In order to implement the national need for the optimal allocation of power resources, power load forecasting, as an important research topic, has important theoretical and practical significance. The purpose of this study is to construct a prediction model considering climate factors based on a large amount of historical data, and to prove that the prediction accuracy is related to both climate factors and load regularity. The results of load forecasting are affected by many climate factors, so firstly the climate variables affecting load forecasting are screened. Secondly, a load prediction model based on the IPSO-Elman network learning algorithm is constructed by taking the difference between the predicted value of the neural network and the actual value as the fitness function of particle swarm optimization. In view of the great influence of weights and thresholds on the prediction accuracy of the Elman neural network, the particle swarm optimization algorithm (PSO) is used to opti... [more]

Among numerous functions performed by the battery management system (BMS), online estimation of the state of health (SOH) is an essential and challenging task to be accomplished periodically. In electric vehicle (EV) applications, accurate SOH estimation minimizes failure risk and improves reliability by predicting battery health conditions. The challenge of accurate estimation of SOH is based on the uncertain dynamic operating condition of the EVs and the complex nonlinear electrochemical characteristics exhibited by the lithium-ion battery. This paper presents an artificial neural network (ANN) classifier experimentally validated for the SOH estimation of lithium-ion batteries. The ANN-based classifier model is trained experimentally at room temperature under dynamic variable load conditions. Based on SOH characterization, the training is done using features such as the relative values of voltage, state of charge (SOC), state of energy (SOE) across a buffer, and the instantaneous sta... [more]

We compare sediment vertical methane flux off the Mahia Peninsula, on the Hikurangi Margin, east of New Zealand’s North Island, with a combination of geochemical, multichannel seismic and sub-bottom profiler data. Stable carbon isotope data provided an overview of methane contributions to shallow sediment carbon pools. Methane varied considerably in concentration and vertical flux across stations in close proximities. At two Mahia transects, methane profiles correlated well with integrated seismic and TOPAS data for predicting vertical methane migration rates from deep to shallow sediment. However, at our “control site”, where no seismic blanking or indications of vertical gas migration were observed, geochemical data were similar to the two Mahia transect lines. This apparent mismatch between seismic and geochemistry data suggests a potential to underestimate gas hydrate volumes based on standard seismic data interpretations. To accurately assess global gas hydrate deposits, multiple... [more]

Oil shales are developed in the Shale Member of the Middle Jurassic Shimengou Formation in the Qaidam Basin, China. The oil shales can be classified into three quality groups (low-, medium-, and high-quality oil shales) through a comprehensive analysis protocol that includes Rock-Eval pyrolysis, total organic carbon (TOC) content, proximate analysis, gas chromatography-mass spectrometry (GC-MS), X-ray diffraction (XRD), major and trace element analyses, and maceral analysis. The low-quality oil shales mainly contain type II1 kerogen, the medium-quality oil shales mainly contain type I-II1 kerogen, and the high-quality oil shales mainly contain type I kerogen. All are immature to early thermally mature. The oil yield of the oil shales is directly related to their quality and are positively correlated with TOC content and calorific value. All studied samples were deposited under anaerobic conditions but in different paleoenvironments. The low-quality oil shales were mainly deposited in f... [more]

The mining industry plays an extremely important strategic role in China’s economic and social development. In the new era of pursuing circular/green/efficient development, the evaluation of the total factor environmental efficiency (TFEE) of China’s mining industry is essential for alleviating resource waste and environmental pollution. The Epsilon-Based Measure (EBM) model effectively solves the shortcomings of radial and non-radial DEA models. In addition, the Malmquist−Luenberger (ML) index can measure the dynamic change of efficiency value. Combining the EBM model and the ML productivity index, this paper evaluates the TFEE from the static and dynamic perspective in China’s 31 provincial mining industries over the period 2007−2016. The Theil index is employed to reveal the root of the overall provincial TFEE gap (OGTFEE) in China’s mining industry. The results show that the average total factor static environmental efficiency (TFSEE) of China’s provincial mining industry exhibits... [more]

The potential of solar energy encourages research into new applications of this technology. Access to renewable energy is an important element of modern urban policies aimed at sustainable development and the energy security of residents but also limits energy production from conventional sources due to the pollution associated with them. More and more often, projects of new urban infrastructure facilities include integrated photovoltaic panels. Assessing solar potential is an important step when planning the layout of solar panels, and the increasing number of high-rise buildings increases shaded areas, sometimes even for most of the day. Therefore, a detailed shading analysis can be important for city decision makers, investors and local communities. The results of the 3D spatial analysis presented in the article can be used to optimize the location and analyse the profitability of photovoltaic installations in a city. The aim of the project was to evaluate the effectiveness of photo... [more]

Recent developments in disruptive technologies along with the cost reduction of photovoltaics have been transforming business models in the electricity sector worldwide. The rise of prosumers has led to a more decentralized and open local green energy market through the emergence of peer-to-peer (P2P) energy trading, where consumers and prosumers can buy or sell electricity through an online trading platform. P2P energy trading has the potential to make green energy more accessible at the local level, provide a customer choice that aligns with community values, and promote the use of renewable energy (RE) for local consumption. Although P2P energy trading has already been adopted in some countries, its implementation remains challenging in other countries, including Thailand. In this work, we investigated the drivers and challenges of implementing P2P energy trading in Thailand based on the perspectives of P2P energy trading pilot project developers participating in the regulatory sand... [more]

Electro-hydraulic differential cylinder drives with variable-speed displacement units as their central transmission element are subject to an increasing focus in both industry and academia. A main reason is the potential for substantial efficiency increases due to avoidance of throttling of the main flows. Research contributions have mainly been focusing on appropriate compensation of volume asymmetry and the development of standalone self-contained and compact solutions, with all necessary functions onboard. However, as many hydraulic actuator systems encompass multiple cylinders, such approaches may not be the most feasible ones with respect to efficiency or commercial feasibility. This article presents the idea of multi-cylinder drives, characterized by electrically and hydraulically interconnected variable-speed displacement units essentially allowing for completely avoiding throttle elements, while allowing for hydraulic and electric power sharing as well as the sharing of auxilia... [more]

The effect of manufacturing geometry deviations on the flow past a NACA 64(3)-618 asymmetric airfoil is studied. This airfoil is 3D printed according to the coordinates from a public database. An optical high-precision 3D scanner, GOM Atos, measures the difference from the idealized model. Based on this difference, another model is prepared with a physical output closer to the ideal model. The velocity in the near wake (0−0.4 chord) is measured by using the Particle Image Velocimetry (PIV) technique. This work compares the wakes past three airfoil realizations, which differ in their similarity to the original design (none of the realizations is identical to the original design). The chord-based Reynolds number ranges from 1.6×104 to 1.6×105. The ensemble average velocity is used for the determination of the wake width and for the rough estimation of the drag coefficient. The lift coefficient is measured directly by using force balance. We discuss the origin of turbulent kinetic energy... [more]

Increasing the modulation index by utilizing the negative voltage states of full-bridge submodules (FBSMs) can greatly reduce capacitor usage of modular multilevel converters (MMCs), thereby optimizing the cost and volume. The hybrid MMC is composed of half-bridge submodules (HBSMs) and FBSMs, and the capacitor voltages of the two types of submodules (SMs) have different shapes as long as negative voltage states exist. This condition greatly complicates the analysis and design of the energy storage requirement of the hybrid MMC, which utilizes the negative voltage states of FBSMs to boost the AC voltage. A numerical calculation method for solving the capacitor voltages and designing the capacitances of FBSMs and HBSMs is proposed in order to accurately determine the minimum energy storage requirement considering the difference between the energy variations in FBSMs and HBSMs. In the numerical calculation, the energy storage and voltage of the arm are decomposed into FBSM and HBSM parts... [more]

Wellbore instability resulting from deep mudstone hydration severely restricts the development of oil and gas resources from deep reservoir in western China. Accurate evaluation of drilling fluid inhibition properties plays an important role in selecting drilling fluid that can control deep mudstone hydration and then sustain wellbore stability. The previous evaluations are conducted by qualitative analysis and cannot consider the influence of complex hydration conditions of deep mudstone (high temperature, high pressure and flushing action). The study proposes a quantitative method to evaluate drilling fluid’s inhibition property for deep mudstone under natural drilling conditions. In this method, the cohesive strength of mudstone after hydration is adopted as the inhibition index of the tested drilling fluid. An experimental platform containing a newly designed HPHT (High pressure and high temperature) hydration experiment apparatus and mechanics characterization of mudstone after hy... [more]

In this paper, a DC-DC converter with an innovative topology for automotive applications is proposed. The goal of the presented power converter is the electrical storage system management of an electric vehicle (EV). The presented converter is specifically compliant with a 400 V battery, which represents the high-voltage primary source of the system. This topology is also able to act as a bidirectional power converter, so that in this case, the output section is an active stage, which is able to provide power as, for example, in the case of a low-voltage battery or a supercapacitor. The proposed topology can behave either in step-down or in step-up mode, presenting in both cases a high gain between the input and output voltage. Simulation results concerning the proposed converter, demonstrating the early feasibility of the system, were obtained in a PowerSIM environment and are described in this paper.

The main methods employed for Hosting Capacity (HC) calculations are basically classified into deterministic, stochastic and time series. In this scenario, the authors herein propose a hybrid methodology, which shows efficiency and ease of implementation. Besides the method presented, it is also calculated a hosting capacity of a real feeder which was modeled and analyzed taking into consideration variations in load and power injected by distributed generation sources. The proposed hybrid method deploys just one time series with the feeder power demand data, which are easily obtained from the feeder’s origin substation. Low voltage loads were modeled by the ratio between their maximum demands and the feeder maximum demand, making easier to start up the grid model implementation. Hence, the advantages of the proposed methodology can be summarized in: (a) easy to obtain the input parameters; (b) agility in implementing the study; (c) higher processing speed and (d) results consistent wit... [more]

In this paper, an improved finite control set model predictive current control (FCS-MPCC) is proposed for a two-phase hybrid stepper motor fed by a three-phase voltage source inverter (VSI). The conventional FCS-MPCC selects an optimal voltage vector (VV) from six active and one null VVs by evaluating a simple cost function and then applies the optimal VV directly to the VSI. Though the implementation is simple, it features a large current ripple and total harmonic distortion (THD). The proposed improved FCS-MPCC builds an extended control set consisting of 37 VVs to replace the original control set with only seven VVs. The increase in the amount of VVs helps to regulate the current more accurately. In each control period, the improved FCS-MPCC takes advantage of deadbeat control to calculate a reference VV, and only the three VVs adjacent to the reference VV are predicted and evaluated, which decrease the computational workload significantly. Build waveform patterns for all VVs in the... [more]

Carbon capture and storage (CCS) is a key strategy to reduce carbon dioxide (CO2) emissions from industrial point sources. Gas absorption into aqueous amine solutions is an immediate technology for carbon capture that has been tested in many demonstration plants. One concern of using the amine-based carbon capture process is the environmental impacts and health risk caused by emissions of gaseous amines from the process to the atmosphere. This work applied the knowledge of air dispersion modelling to map out the atmospheric dispersion and resulting ground surface level concentration of gaseous amine, namely Monoethanolamine (MEA), from a coal-fired power plant (with a carbon capture unit) and in surrounding areas, in case of an accidental leaking of amine from the CCS system to the atmosphere. The chosen study area was centered on a coal-fired power plant in the province of Saskatchewan, Canada. The Environmental Protection (EPA) approved air pollution model (CALPUFF), together with me... [more]

The demand response (DR) program is one of the most promising components in the development of the Smart Grid. However, there are many challenges in practical operation to improve the existing and outdated system to comply with the DR programs. In Thailand, the major pain point of the office building owner in the DR program is the additional equipment, modification and operation cost of the existing equipment. Moreover, the sophisticated solution and control are other obstacles that need more measurements and data, and they make the operation difficult to work with. In this paper, we implemented a simple yet cost-effective hardware and software solution targeting an outdated air-conditioning system without voiding the warranty of the outdated equipment and without installing any additional measurements. In addition, the proposed operation is designed to be easy to operate under the equipment limitation and unskilled labor. More importantly, indoor temperature setpoint schedules during... [more]

Occupant behaviour plays a significant role in shaping the dynamics of energy consumption in buildings, but the complex nature of occupant behaviour has hindered a deeper understanding of its influence. A meta-analysis was conducted on 65 published studies that used data-driven quantitative assessments to assess energy-related occupant behaviour using the Knowledge Discovery and Data Mining (KDD) framework. Hierarchical clustering was utilised to categorise different modelling techniques based on the intended outcomes of the model and the types of parameters used in various models. This study will assist researchers in selecting the most appropriate parameters and methods under various data constraints and research questions. The research revealed two distinct model categories being used to study occupant behaviour-driven energy consumption, namely (i) occupancy status models and (ii) energy-related behaviour models. Multiple studies have identified limitations on data collection and p... [more]

This study focused on developing a sustainability project carried out in 11 Federal Institute of Education, Science, and Technology of Goiás (IFG) campuses wherein energy efficiency and distributed generation actions were developed. Energy consumption was optimized by retrofitting the lighting system, installing a photovoltaic (PV) generation system, quantifying the building efficiency, energy monitoring, training, and qualification, and focusing on the efficient use of electric energy. We first present the Brazilian legislation that regulates the Research and Development Program in the electric energy sector. Then, we describe the case study that was applied to the educational institution. In the lighting system, 18,377 inefficient lamps were replaced by lamps with more efficient technology, with an energy saving of 867.9 MWh/year and a peak demand reduction of 309.6 kW. The proposed generation system aimed to install 3076 PV modules on the roofs of selected campus buildings, totaling... [more]