The three-phase flow in a aeration tank driven by an inverted umbrella aerator is relatively complex, including the processes of the hydraulic jump, air entrainment, and sludge particle sedimentation. A three-phase flow test bench for an inverted umbrella aerator is established for studying its influence on aeration performance. The experiment mainly studies the changed law of aeration performance under different immersion depths or sludge concentrations and measures the flow rate and sludge concentrations in the aeration tank in different working conditions. The results are as follows. (1) The total oxygen transfer coefficient, standard oxygenation capacity, and standard power efficiency increase with the increase in rotational speed. The total oxygen transfer coefficient and standard-charge oxygen capacity first increase and then decrease with the decrease in immersion depth, reaching a maximum at −20 mm immersion depth. The standard dynamic efficiency has a similar trend and reaches... [more]

The multiphase flow in the mold has a significant impact on the surface quality of the slab. In this paper, the multiphase flow in the mold is studied by establishing a one-quarter scale water mold, with the aid of a high-speed camera and particle image velocimetry (PIV). The oil phase will make the liquid surface velocity around the nozzle smaller. The greater the viscosity of the oil, the greater the critical water model casting speed and the shallower the critical immersion depth of submerged entry nozzle (SEN). Blowing will enhance the turbulence of the flow field in the mold and have a suppressing effect on the surface velocity. However, the vertical velocity of the narrow surface does not change significantly. The randomness of the bubble entering the mold from the nozzle can easily cause asymmetry of the instantaneous flow. The number of bubbles with a diameter less than 1 mm increase with the increase in gas flow rate. The larger the bubble size, the more buoyant around the noz... [more]

The drag coefficient CD plays an important role in studying the interaction forces between individual particles and fluid. Due to the irregular particle shape of natural sands, studying the sedimentation characteristics and drag coefficient model of irregular particles is of great significance in explaining natural phenomena, predicting the sedimentation process, and calculating the interphase forces between individual particles and fluid. In this paper, firstly, an experimental system for measuring the settling velocity was built, the settling velocity of 67 tests of spheres with different particle Reynolds number Res in the Newtonian fluid were obtained, and the CD−Res correlation of sphere settling in the Newtonian fluid was established. The proposed CD−Res correlation was in good agreement with the existing classical CD−Res correlations, which proves the reliability of the experimental system and data processing method. Existing literature shows that the previous models are only su... [more]

Cardiopulmonary resuscitation (CPR) is an emergency procedure performed on a person experiencing cardiac arrest to manually preserve brain function until spontaneous breathing and blood circulation can be restored. If performed timely and properly, it can improve the survival rate of a person experiencing cardiac arrest. The promotion of CPR has always been an important task for countries around the world. Countries around the world often hold relevant study camps and seminars to improve the public’s awareness of CPR. On the basis of this rationale, this paper proposes an interactive teaching aid kit for CPR that uses a CPR manikin and tutoring software to facilitate CPR learning among trainees. The CPR manikin is equipped with sensors that determine whether the CPR steps are performed correctly. Data from the sensors are sent to the tutoring software through wireless transmission. The software provides video demonstrations and textual instructions concerning the standard CPR procedure... [more]

A transiting test using vehicle-driving passive wind is a novel experimental technique to perform aerodynamic tests, proposed by the authors. However, this low-cost, short-cycle, and symmetrical test method can be influenced by many factors. In this paper, a comparative study on the influence of road types on a transiting test of aerodynamic coefficient measurements is presented. The tests were carried out on three different roads (expressway, viaduct highway, and tunnel highway); for each road type, structure models with and without end plates were investigated. For all the road types, measured turbulence intensity (around 4%) was similar to that of the wind tunnel test under the following conditions: 3 °C temperature, 42% humidity, 0.28 m/s natural wind speed, vehicle driving in a straight line with stable speed, and no traffic flow. All the tests were conducted under the above conditions. To deal with the interference components in the original data signals obtained from a viaduct h... [more]

SLAM algorithms generally use the last system posture to estimate its current posture. Errors in the previous estimations can build up and cause significant drift accumulation. This accumulation of error leads to the bias of choosing accuracy over robustness. On the contrary, sensors like GPS do not accumulate errors. But the noise distribution in the readings makes it difficult to apply in high-frequency SLAM systems. This paper presents an approach which uses the advantage of both tightly-coupled SLAM systems and highly robust absolute positioning systems to improve the robustness and accuracy of a SLAM process. The proposed method uses a spare reference trajectory frame to measure the trajectory of the targeted robotic system and use it to recover the system posture during the mapping process. This helps the robotic system to reduce its accumulated error and able the system to recover from major mapping failures. While the correction process happens whenever a gap is detected betwee... [more]

Deep eutectic solvents (DESs) have been used for the pretreatment of lignocellulose and showed selective dissolution for different lignocellulosic components. In this study, six new ternary DESs were synthesized on the basis of anhydrous oxalic acid DES by adding alcohol, acid, and deionized water, respectively, including choline chloride/anhydrous oxalic acid/ethylene glycol (ChCl-OA-EG), choline chloride/anhydrous oxalic acid/glycerol (ChCl-OA-G), choline chloride/anhydrous oxalic acid/lactic acid (ChCl-OA-LA), choline chloride/anhydrous oxalic acid/malonic acid (ChCl-OA-MA), choline chloride/anhydrous oxalic acid/10% H2O (v/v) (ChCl-OA + 10% H2O), and choline chloride/anhydrous oxalic acid/20% H2O (v/v) (ChCl-OA + 20% H2O). The lignin in bagasse was extracted and separated with these ternary DESs, and Fourier Transform Infrared (FTIR), Scanning electron microscope (SEM), X-ray diffraction (XRD), Two-dimensional Heteronuclear Single Quantum Coherence (2D HSQC), and Thermogravimetric... [more]

The motion of non-spherical particles with sharp edges, as they are commonly involved in practice, was characterized by residence time distribution (RTD) measurement in a continuous drum. Particles with two sizes, 6 and 10 mm, and two densities, 750 and 2085 kg/m3, were used in the experiments. The effects of rotation speed (3−11 rpm), incline angle (2−4°), feed rate, and mixture composition were investigated and compared to the results of other researchers on particles without sharp edges. We also fitted the RTD with an axial dispersion model to obtain a better insight into the flow behavior. MRT of non-spherical particles with sharp edges depends on ω−α similar to other shapes, while the value of alpha is higher for particles with sharp edges (0.9 < α < 1.24), especially at high incline angles. The MRT depends on incline angle, β−b, where b varies between 0.81 (at low ω) and 1.34 (at high ω), while it is close to 1 for other shapes. Feed rate has a slight effect on the MRT of p... [more]

The collective behavior of quantum particles is one of the most intriguing phenomena in quantum optics. In particular, superradiance refers to spontaneous collective emissions from a group of quantum particles behaving collectively as a whole due to the buildup of macroscopic quantum coherence. An important question is whether macroscopic quantum coherence is constructed by means of a quantum synchronization (i.e., a quantum analog of classical synchronization) or not. The purpose of this article is to draw attention to this question from the author’s perspective. A few selected studies relevant to synchronized atoms and molecules are discussed. The author concludes that collective behaviors of quantum particles may be formulated as quantum synchronizations, but extensive studies are still needed to confirm this hypothesis.

In order to dispose of large quantities of mineral tailings, paste backfill is proposed and widely adopted. Paste backfill, which has high concentration and yield stress and behaves as a non-Newtonian fluid, is prepared at the surface plant and then transported underground. Vertical pipelines are more likely to suffer various failures, such as pipe breaks, wear and plugging, during the transport process. Few present studies focus on the flow behavior of paste slurry flowing in vertical pipes. In this work, two L-shaped pipeline systems with internal diameters (ID) of 40 mm and 65 mm with electrical resistance tomography (ERT) were manufactured to visualize flow regimes and measure the axial velocity and pipe pressure of slurry flowing in the upper and lower zones of vertical pipes. Flow regimes were extracted from ERT-reconstructed images stacked by time-series. Based on this, four typical flow regimes were summarized, and the characteristics of velocity and pressure change with vertic... [more]

This article mainly considers the coexistence of physical sales channels and online sales channels. Online retailers with online sales channels consider whether to provide return policies and whether to provide consumers with return insurance. The research established four return strategy models that: do not provide returns; provide returns but do not provide return insurance; provide return insurance, but the cost is borne by online retailers; and provide return insurance, but the cost is borne by consumers. The authors then studied the online retailers’ optimal return and shipping insurance selection strategies. The results show that when the proportion of residual return value after the value reduction of unit returned products was large, online retailers set higher sales prices and provided return policies, while offline retailers needed to reduce sales prices in order to attract more consumers. When the consumer unit product return compensation was relatively large, online retaile... [more]

The aim of this article is to determine the effect of the biaxial loading of a car seat, in vertical and horizontal directions, on seating comfort. We measured the transfer characteristic in the vertical direction with a free load. The method of laboratory testing of the car seat was chosen due to the simple repetition of the tests, ensuring the same test conditions, with high accuracy of their reproduction. To determine the effect, tests with uniaxial loading were compared with tests with biaxial loading. The resulting characteristic was the transfer characteristic in the vertical direction. The effect of horizontal loading on the transfer characteristic of a car seat was determined.

Understanding chemical processes at the single-molecule scale represents the ultimate limit of analytical chemistry. Single-molecule detection techniques allow one to reveal the detailed dynamics and kinetics of a chemical reaction with unprecedented accuracy. It has also enabled the discoveries of new reaction pathways or intermediates/transition states that are inaccessible in conventional ensemble experiments, which is critical to elucidating their intrinsic mechanisms. Thanks to the rapid development of single-molecule junction (SMJ) techniques, detecting chemical reactions via monitoring the electrical current through single molecules has received an increasing amount of attention and has witnessed tremendous advances in recent years. Research efforts in this direction have opened a new route for probing chemical and physical processes with single-molecule precision. This review presents detailed advancements in probing single-molecule chemical reactions using SMJ techniques. We s... [more]

Using the MTS816 rock mechanics servo tester, an acoustic emission monitoring system and high-speed digital photographic equipment, uniaxial compression tests were conducted on granite specimens containing single fracture slabs after repeated treatment (treatment times 1, 5, 10, 15 and 20) with three types of high temperature (250, 350 and 450 °C) water cooling, respectively, to analyze the basic mechanical parameters, acoustic emission change characteristics and fracture evolution of the specimens during the uniaxial compression process. It is shown that the heating temperature and the number of treatments not only have a deteriorating effect on the basic mechanical parameters of the specimens but also have an important effect on the changes in the basic parameters of acoustic emission at different compression stages. At 250 °C, the acoustic emission characteristics of the specimens at the initial tightening stage tended to decrease (N = 1 and 5 times) then, increase (N = 10 and 15 ti... [more]

Liquid ammonia as a non-aqueous medium has many physical properties close to water, such as small molecular weight and strong permeability. It has been widely used for the ecological processing of cellulosic fibers to improve their luster, softness and dyeing properties. However, there are few reports on the dyeing of wool treated with liquid ammonia, especially at a lower temperature. Herein, a continuous liquid ammonia finishing machine was used to batch process wool followed by dyeing in a commonly-used wool dyeing machine. The results showed that many scale flakes and some cuticle cracking were seen on the fiber surface, and the disulfide bonds of cystine were broken down after liquid ammonia treatment, which promoted the diffusion of dyestuff into the fiber. Moreover, the uptakes and K/S value of wool dyed with Lanaset and Lanasol CE dyes were higher than the untreated wool, and the dyeing temperature could decrease to 85 °C, while the degree of fiber strength reduction merely dec... [more]

The adsorption pore structure is the key affecting the technology of enhanced coal bed methane recovery (ECBM). In this paper, nitrogen adsorption measurement (NAM) and low-field nuclear magnetic resonance (NMR) methods are used to test the structural parameters of adsorption pores of four coal samples with different metamorphic degrees. Combining with the fractal theory, the applicability and the physical significance of fractal dimensions obtained from different models are analyzed. Finally, the main factors affecting the complexity of the pore size structure and the influence of fractal characteristics on the adsorption properties of coal are discussed. The results show that with the increase in the degree of metamorphism, the ranking order of the volume and the specific surface area of adsorption pores of four coal samples are long flame coal > anthracite > gas coal > coking coal. The fractal dimension D2 calculated by the Frenkel−Halsey−Hill (FHH) fractal model ranges from 2.5 to... [more]

This paper investigates the effects of the machining process on the thrust force and mechanical characteristics for the direct drive feed system driven by the flat permanent magnet synchronous linear motor (PMSLM) in machine tools considering the electromechanical couplings. Firstly, the cutting force in the machining process is researched. Then, the analytical model of the direct drive feed system is established and analyzed. The electromechanical couplings between the mechanical system and servo system in the direct drive feed system are studied. Furthermore, the influences of the cutting force on different couplings are analyzed, and the thrust force characteristic is analytically represented. Finally, the validity of the theoretical analysis is verified by the experiments, and the effects of the machining process on the dynamic precision of the feed system are discussed. The results show that the electromechanical couplings in the direct drive system will aggravate the effects of t... [more]

This paper explains the project’s objectives, identifies the key stakeholders, defines the project manager’s authority and provides a preliminary breakdown of roles and responsibilities. For the project’s future, it acts as a source of authority. This paper’s objective is to record the justifications for starting the project, its goals, limitations, solution instructions and the names of the principal stakeholders. This manuscript is meant to be used as a “Project Management Plan Light” for small and medium-sized projects when it would be uneconomical to prepare an entire collection of documents that make up a project management plan. A global media cloud will be provided and managed by the ABC cloud company inside of a consumer’s current premises. In this paper, the authors explain the end-to-end delivery of cloud and compute services. The article mainly focuses on the delivery of virtual machines (VMs), graphics processing unit (GPUs), cloud storage, transcoding, packaging, 24/7 cust... [more]

A growing demand for cheap, strong, and lightweight structures has resulted in an increasing need for materials incorporating macroscopic structures such as surface textures in the form of dimples or internal non-uniformities such as porosity. This has highlighted the potential for misleading results when applying the current standards for the determination of yield strength to materials incorporating such non-uniformities. In the present study, discontinuous, continuous, and severely continuous (departure from linearity significantly prior to macroscopic yield) yield behaviours during tensile loading have been explored with respect to the determination of yield strength. This has clearly shown the limitations of standard measures as well as the incompatibility of different measures, making the comparison of yield strengths deceptive. Therefore, a novel derivative yield method has been proposed. Based on the second derivative of stress with respect to strain, this method is independent... [more]

A method of encapsulation of inorganic additives with organic materials was developed to improve the fine power flowability and film quality for powder coating. The flowability tests angle of repose (AOR) and avalanche angle (AVA) were conducted for the coating samples to characterize the effectiveness of the encapsulated additives on group C fine powder flowability. The results show that both AOR and AVA are significantly affected by the encapsulating materials, the encapsulating material weight percentage, as well as the total loading ratios of additives added in fine powders. Polyester shows the best performance on the modification of the additive due to the high similarity to host powder coating. AOR/AVA first decreases and then decreases with the encapsulating material weight. An optimum percentage exists at approximately 10%. A similar trend is observed with the additive loading ratio, and the minimal AOR/AVA is obtained at additive loading ratios between 0.5% and 0.8%. The effec... [more]

Oxidative stress (OS) and neuroinflammatory stress affect many neurological disorders. Despite the clinical significance of oxidative damage in neurological disorders, still, no effective and safe treatment methods for neuro diseases are available. With this, molecular hydrogen (H2) has been recently reported as an antioxidant and anti-inflammatory agent to treat several oxidative stress-related diseases. In animal and human clinical trials, the routes for H2 administration are mainly categorized into three types: H2 gas inhalation, H2 water dissolving, and H2-dissolved saline injection. This review explores some significant progress in research on H2 use in neurodegenerative diseases (NDs), including Alzheimer’s disease, Parkinson’s disease, neonatal disorders of the brain, and other NDs (retinal ischemia and traumatic brain injury). Even though most neurological problems are not currently curable, these studies have shown the therapeutic potential for prevention, treatment, and mitig... [more]

The impulse water turbine is a promising energy conversion device that can be used as mechanical power or a micro hydro generator, and its application can effectively ease the current energy crisis. This paper aims to clarify the mechanism of liquid acting on runner blades, the hydraulic performance, and energy conversion characteristics in the runner domain of an impulse water turbine with a splitter blade by using experimental tests and numerical simulations. The runner was divided into seven areas along the flow direction, and the power variation in the runner domain was analyzed to reflect its energy conversion characteristics. The obtained results indicate that the critical area of the runner for doing the work is in the front half of the blades, while the rear area of the blades does relatively little work and even consumes the mechanical energy of the runner to produce negative work. The high energy area is concentrated in the flow passage facing the nozzle. The energy is gradua... [more]

Coconut endosperm waste (CEW) was treated by Rhizopus oligosporus via in situ and ex situ fermentations together with bioconversion into valuable black soldier fly larval biomass. The ex situ fermentation could overall enrich the nutritional compositions of CEW by hydrolyzing its complex organic polymers and exuding assimilable nutrients to enhance the black soldier fly larvae (BSFL) growth. Nevertheless, the larval gut bacteria were competing with Rhizopus oligosporus in in situ fermentation, derailing the hydrolysis processes and larval growth. Accordingly, the highest growth rates achieved were around 0.095 g/day, as opposed to only 0.065 g/day whilst using 0.5 wt% of Rhizopus oligosporus to perform ex situ and in situ fermentations, respectively. These were also underpinned by the greater amount of total CEW consumed when employing ex situ fermentation, with comparable metabolic costs to feeding on in situ-fermented CEW. The mature BSFL were subsequently harvested and the amounts o... [more]

Black soldier fly larvae (BSFL) have been employed for valorizing organic waste materials as the larvae are able to consume organic waste and transform it into valuable larval biomass. In this study, BSFL were found to potentially reduce blended sewage sludge. The addition of palm kernel expeller (PKE) fortified the protein and lipid content in blended sewage sludge substrates, leading to larval growth enhancement. In addition, the larval weight also influenced the lipid yield and fatty acid methyl ester (FAME) profile. However, the optimum ratio of sewage sludge to PKE had to be determined as excess PKE content could become a threat to larval growth by contributing to the reduction of non-fiber carbohydrates content in the feed, thereby resulting in the decrease in lipid yield and FAME content. In this work, a sewage sludge to PKE ratio of 2:3 proffered the highest larval weight gained at 46.99 ± 2.09 mg/larva. Meanwhile, a proportion of 3:2 of sewage sludge to PKE was able provide th... [more]

Microencapsulation is a well-known technology for the lipid delivery system. It prevents the oxidation of fatty acids and maintains the quality of lipid after extraction from oil seed and processing. In flaxseed oil, the amount of ω-3 and ω-6 polyunsaturated fatty acids are 39.90−60.42% and 12.25−17.44%, respectively. A comprehensive review article on the microencapsulation of flaxseed oil has not been published yet. Realizing the great advantages of flaxseed oil, information about different technologies related to the microencapsulation of flaxseed oil and their characteristics are discussed in a comprehensive way, in this review article. To prepare the microcapsule of flaxseed oil, an emulsion of oil-water is performed along with a wall material (matrix), followed by drying with a spray-dryer or freeze-dryer. Different matrices, such as plant and animal-based proteins, maltodextrin, gum Arabic, and modified starch are used for the encapsulation of flaxseed oil. In some cases, emulsif... [more]