To respond to the dire need for miniaturization and process simplification of continuous-flow PCR (CF-PCR) device, this paper represents design and operation guide of a novel metal alloy assisted hybrid microdevice (polydimethylsiloxane (PDMS) and glass) for CF-PCR employing one heater. In this research, the specific objectives are to determine whether one heater chip design will be flexible enough when the size of DNA base pair is varied and to investigate whether one heater CF-PCR device will be able to resolve the longstanding problem of thermal crosstalk. Furthermore, the parametric study is performed to determine which of the fourteen parameters have the greatest impact on the performance of one heater CF-PCR device. The main objective of this parametric study is to distinguish between the parameters that are either critical to the chip performance or can be freely specified. It is found that substrate thickness, flow rate, channel spacing, aspect ratio, channel pass length and ex... [more]

The thermal performances based on the interaction of nanoparticles are the topic of great interest in recent years. In the current continuation, we have utilized the activation energy and thermal radiation consequences in the bioconvection flow of magnetized Oldroyd-B nanoparticles over a stretching cylinder. As a novelty, the second order slip features (Wu’s slip) and convective Nield boundary assumptions are also introduced for the flow situation. The heat performances of nanofluids are captured with an evaluation of the famous Buongiorno’s model which enables us to determine the attractive features of Brownian motion and thermophoretic diffusion. The suggested thermal system is based on the flow velocity, nanoparticles temperature, nanoparticles volume fraction and motile microorganisms. The governing flow equations for the flow problem are constituted with relevant references for which numerically solution is developed via shooting algorithm. A detailed graphically analysis for the... [more]

As an important over-current component of the waterjet propulsion system, the main function of a nozzle is to transform the mechanical energy of the propulsion pump into the kinetic energy of the water and eject the water flow to obtain thrust. In this study, the nozzle with different geometry and parameters was simulated based on computational fluid dynamics simulation and experiment. Numerical results show a good agreement with experimental results. The results show that the nozzle with a circular shape outlet shrinks evenly. Under the designed flow rate condition, the velocity uniformity of the circular nozzle is 0.26% and 0.34% higher than that of the elliptical nozzle and the rounded rectangle nozzle, respectively. The pump efficiency of the circular nozzle is 0.31% and 0.14% higher than that of the others. The pressure recovery and hydraulic loss of the circular nozzle are superior. The hydraulic characteristics of the propulsion pump and waterjet propulsion system are optimal wh... [more]

The unsteady flow process of waterjet pumps is related to the comprehensive performance and phenomenon of rotating stall and cavitation. To analyze the unsteady flow process on the unsteady condition, a computational domain containing nozzle, impeller, outlet guide vane (OGV), and shaft is established. The surface vortex of the blade is unstable at the valley point of the hydraulic unstable zone. The vortex core and morphological characteristics of the vortex will change in a small range with time. The flow of the best efficiency point and the start point of the hydraulic unstable zone on each turbo surface is relatively stable. At the valley point of the hydraulic unstable zone, the flow and pressure fields are unstable, which causes the flow on each turbo surface to change with time. The hydraulic performance parameters are measured by establishing the double cycle test loop of a waterjet propulsion device compared with numerical simulated data. The verification results show that the... [more]

This work presents a numerical investigation on natural convection in a circular enclosure with an internal flat plate at Ra = 106. The cross-section area of the plate was fixed at three values, H·W/D2 = 0.01, 0.04, and 0.09, in which H and W are the height and width of the plate and D is the diameter of the enclosure while the aspect ratio changes, which makes the plate vertically placed (H > W) or horizontally placed (H < W). The objective of this work was to explore the effects of the orientation and aspect ratio of the plate on the characteristics of natural convection in various aspects. The numerical results reveal that the overall heat transfer rate is higher for the vertically placed plate and increases with the cross-section area, while the width of the plate has almost no effect for the horizontally placed plate, especially for the plate with a relatively large cross-section area. Depending on the orientation and aspect ratio, there can be one primary vortex, one primary a... [more]

Ice slurry is a potential secondary refrigerant for commercial refrigeration systems because of its remarkable thermal properties. It is necessary to optimize the heat transfer process of ice slurry to reduce the energy consumption of the refrigeration system. Thus, this study investigates the heat transfer performance of single-phase (aqueous solution) and two-phase (ice slurry) refrigerants in a straight horizontal tube. The numerical simulations for ice slurry were performed with ice mass fraction ranging from 5% to 20%. The effects of flow velocity and ice concentration on the heat transfer coefficient were examined. The results showed that heat transfer coefficient of ice slurry is considerably higher than those of single-phase flow, particularly at high flow velocity and ice content, where increase in heat transfer with a factor of two was observed. The present results confirmed that ice slurry heat transfer ability is considerably affected by flow velocity and ice concentration... [more]

COREX is one of the commercialized smelting reduction ironmaking processes. It mainly includes two reactors, i.e., a (reduction) shaft furnace (SF) and a melter gasifier (MG). In comparison with the conventional blast furnace (BF), the COREX MG is not only equipped with a more complicated top charging system consisting of one gimbal distributor for coal and eight flap distributors for direct reduction iron (DRI), but also the growth mechanism of its burden pile is in a developing phase, rather than that in a fully-developed phase in a BF. Since the distribution of charged burden plays a crucial role in determining the gas flow and thus in achieving a stable operation, it is of considerable importance to investigate the burden distribution influenced by the charging system of COREX MG. In the present work, a mathematical model is developed for predicting the burden distribution in terms of burden layer structure and radial ore/coal ratio within the COREX MG. Based on the burden pile wid... [more]

This study systematically investigates the pressure fluctuation in the riser of a dual interconnected circulating fluidized bed (CFB) representing a 10 kWth cold-flow model (CFM) of a chemical-looping combustion (CLC) system. Specifically, a single-species system (SSS) and a binary-mixtures system (BMS) of particles with different sizes and densities were utilized. The pressure fluctuation was analyzed using the fast Fourier transform (FFT) method. The effect of introducing a second particle, changing the inventory, composition (i.e., 5, 10 to 20 wt.%), particle size ratio, and fluidization velocity were investigated. For typical SSS experiments, the results were similar to those scarcely reported in the literature, where the pressure fluctuation intensity was influenced by varying the initial operating conditions. The pressure fluctuations of BMS were investigated in detail and compared with those obtained from SSS experiments. BMS exhibited different behaviour; it had intense pressur... [more]

Two advanced removal methods (adsorption and photocatalysis) were compared for the elimination of an ethoxylated alkylphenol (nonylphenol polyethylene glycol, NPEG). For the adsorption process, zeolites were used in their natural state, and the process was characterized by DRX (X-ray diffraction) and SEM−EDS (Scanning electron microscopy). The analysis of the results of the adsorption kinetics was carried out using different isotherms to interpret the removal capacity of zeolites. The Temkin kinetic model better predicted the experimental data and was satisfactorily adjusted to models of pseudo-second order (PSO). On the other hand, for photocatalysis, nano-particles of Ag (silver) were deposited on titanium oxide (TiO2) Degussa-P25 by photo-deposition, and the catalyst was characterized by diffuse reflectance and SEM−EDS. The data obtained using the two removal techniques were analyzed by UV−Vis (ultraviolet-visible spectrophotometry) and total organic carbon (TOC). The kinetic data w... [more]

The objective of this paper was to study the transport and deposition of non-spherical oblate and prolate shaped particles for the flow in a tube with a radial suction velocity field, with an application to experiments related to composite manufacturing. The transport of the non- spherical particles is governed by a convective diffusion equation for the probability density function, also called the Fokker−Planck equation, which is a function of the position and orientation angles. The flow is governed by the Stokes equation with an additional radial flow field. The concentration of particles is assumed to be dilute. In the solution of the Fokker−Planck equation, an expansion for small rotational Peclet numbers and large translational Peclet numbers is considered. The solution can be divided into an outer region and two boundary layer regions. The outer boundary layer region is governed by an angle-averaged convective-diffusion equation. The solution in the innermost boundary layer regi... [more]

The secondary settling tank is an essential unit for the biochemical treatment of domestic sewage, and its operational effect influences the quality of effluent. Under the influence of the confluence of rainwater and sewage, wastewater use habits, etc., the inflow of the secondary sedimentation tank changes over time. In this paper, OpenFOAM, an open-source computational fluid dynamics package, was used to study the dynamic behaviors of solid−liquid two-phase flow in the tank under influent flow rate variations. A coupled method including a mixture model, drift equation and a dynamic boundary method is proposed. Numerical investigations were carried out for a 2D axisymmetric sedimentation tank using 12 cases. With increasing influent flow rate, sludge accumulates continuously in the bottom left side of the tank, sludge hopper, and inlet; the sludge blanket thickness near the right end of the tank increases continuously; and the sludge concentration in the tank approximately linearly in... [more]

Computational Fluid Dynamics (CFD) has been firmly established as a fundamental discipline to advancing research on energy engineering. The major progresses achieved during the last two decades both on software modelling capabilities and hardware computing power have resulted in considerable and widespread CFD interest among scientist and engineers. Numerical modelling and simulation developments are increasingly contributing to the current state of the art in many energy engineering aspects, such as power generation, combustion, wind energy, concentrated solar power, hydro power, gas and steam turbines, fuel cells, and many others. This review intends to provide an overview of the CFD applications in energy and thermal engineering, as a presentation and background for the Special Issue “CFD Applications in Energy Engineering Research and Simulation” published by Processes in 2020. A brief introduction to the most significant reviews that have been published on the particular topics is... [more]

An internal circulation (IC) anaerobic reactor is widely used in the treatment of municipal and industrial wastewater with high volumetric loading rates. The performance of an IC reactor is closely related with hydrodynamic behaviors of anaerobic granules. Typically, anaerobic granules work in swarms and the settling behavior of a granule is disturbed by other granules. However, the research on anaerobic granule swarms is insufficient. In this work, Computational Fluid Dynamics (CFD) method was employed to study the hydrodynamic behaviors of anaerobic granule swarms with various voidages. The simulated results showed that the average velocity inside granules increased significantly as the voidage of granule swarm decreased and as the Reynolds number increased. The maximum shear stress on the granule’s surface increased with decreasing voidage and increasing Reynolds number. Based on the hydrodynamic behaviors of anaerobic granule swarms, an improved model of drag force coefficient for... [more]

The hydrodynamics of droplets passing through metal foam is investigated using the lattice Boltzmann method (LBM). The accurate 3D porous structure for the simulation is generated by X-ray micro-computed tomography. The simulated results are in good agreement with the experimental ones using high-speed video. The simulated results show that for droplets passing metal foam, there is a critical capillary number, Cac (around 0.061), above which the droplet continues to deform until it breaks up. The simulated results show that the capillary number, droplet size, pores diameter, and thickness of metal foam have the significant effect of droplets deforming and breaking up when the droplets pass through the metal foam. To avoid the calescence of two droplets at the inlet zone of the metal foam, the distance between droplets should be larger than three times the diameter of the droplet.

In recent years and with the increasing rigor of the International Maritime Organization (IMO) emission regulations, the shipping industry has focused more on environment-friendly and efficient power. Low-pressure dual-fuel (LP-DF) engine technology with high efficiency and good emissions has become a promising solution in the development of marine engines. This engine often uses pre-combustion chamber (PCC) to ignite natural gas due to its higher ignition energy. In this paper, a parametric study of the LP-DF engine was proceeded to investigate the design scheme of the PCC. The effect of PCC parameters on engine performance and emissions were studied from two aspects: PCC nozzle diameter and PCC nozzle angle. The results showed that the PCC nozzle diameter affected the propagation of the flame in the combustion chamber. Moreover, suitable PCC nozzle diameters helped to improve flame propagation stability and engine performance and reduce emissions. Furthermore, the angle of the PCC no... [more]

The physical and chemical processes in the raceway zone of the COREX melter−gasifier express are similar to those inside the blast furnace. Based on the research achievements on blast furnaces, the unsteady numerical simulation of a gas-solid two-phase in the raceway was carried out by using computational fluid software. The formation process of the raceway in the COREX melter−gasifier was simulated. The shape and size of the raceway were obtained. Then, the effect of gas flow on the depth and height of the raceway was analyzed in this paper.

The traditional treatment of waste incineration flue gas is mostly carried out in low temperatures, but there are some problems such as corrosion of the heating surface at high and low temperatures, re-synthesis of dioxins, and low efficiency. Therefore, it is necessary to remove the pollutants at high temperatures. For the grate waste incinerator, this study proposes an adiabatic cyclone flue arranged at the exit of the first-stage furnace of the grate waste incinerator to pre-remove the fly ash at high temperatures, so as to alleviate the abrasion and corrosion of the tail heating surface. In this paper, computational fluid dynamics (CFD) method is applied to study the performance of a cyclone flue under different structural parameters, and the comprehensive performance of the cyclone flue is evaluated by the technique for order preference by similarity to an ideal solution (TOPSIS) method. The results show that particle separation efficiency increases at first and then decreases wit... [more]

Unreinforced masonry walls are extensively used in the petrochemical industry and they are one of the most vulnerable components to blast loads. To investigate the failure modes and improve the blast resistances of masonry walls, four full-scale field tests were conducted using unreinforced and spray-on polyurea-reinforced masonry walls subjected to gas explosions. The results suggested that the primary damage of the unreinforced masonry wall was flexural deformation and the wall collapsed at the latter stage of gas explosion. The presence of polyurea coatings could effectively improve the anti-explosion abilities of masonry walls, prevent wall collapses, and retain the flying fragments, which would reduce the casualties and economic losses caused by petrochemical explosion accidents. The bond between the polymer and masonry wall was critical, and premature debonding resulted in a failure of the coating to exert the maximum energy absorption effect. A numerical model for masonry walls... [more]

The current continuation aim is to explore the rheological consequences of Eyring Powell nanofluid over a moving surface in the presence of activation energy and thermal radiation. The bioconvection of magnetized nanoparticles is executed with the evaluation of motile microorganism. The most interesting Wu’s slip effects are also assumed near the surface. The evaluation of nanoparticles for current flow problems has been examined by using Buongiorno’s model. The governing equations for the assumed flow problem are constituted under the boundary layer assumptions. After converting these equations in dimensionless form, the famous shooting technique is executed. A detailed physical significance is searched out in the presence of slip features. The variation of physical quantities, namely velocity, nanoparticles temperature, nano particles concentration, motile microorganism density, skin friction coefficient, local Nusselt number and motile organism density number are observed with detai... [more]

The injection pressure of the gasoline direct injection vehicle is currently developing from the low pressure to the high pressure, and the increase of the injection pressure has brought various damage problems to the high pressure pump structure. These problems should be solved urgently. In this paper, the damage problem of the high pressure pump unloading valve ball in a gasoline direct injection vehicle under high pressure conditions is studied. The theoretical calculation of the force of the pressure relief valve is carried out. Firstly, the equivalent friction coefficient is obtained by decoupling analysis of the statically indeterminate model. Based on this, a finite element model is established. The equivalent stress is obtained by numerical simulation. The equivalent stress is compared with the yield strength of the valve ball material to determine that the valve ball damage is a non-static damage. At the same time, the s-N curve of the probability of destruction of one-million... [more]

The objective of this article is to investigate the impacts of thermo-diffusion effect on unsteady axisymmetric Casson flow over a time-dependent radially stretching sheet with a multi-slip parameter and the force of chemical reaction. We employed an established similarity transformation to this non-linear partial differential system to convert it into a system of ordinary differential equations. The numerical results are attained for this system by using KELLER-BOX implicit finite difference scheme. It has great reliability and accuracy even a very short time period for computational simulation. The impacts of influential flow parameters on fluid flow are sketched through graphs and the numerical results are thoroughly argued. The temperature, velocity and wall concentration control parameters are analyzed. (i) It is witnessed that chemical reaction is not favorable to enhance the velocity profile. (ii) Multi-slip parameters vary inversely with velocity profile. (iii) The fluid concen... [more]

The pathogenesis of Parkinson’s disease (PD) is closely associated with the aggregation of α-synuclein (αS) protein. Finding the effective inhibitors of αS aggregation has been considered as the primary therapeutic strategy for PD. Recent studies reported that two neurotransmitters, dopamine (DA) and norepinephrine (NE), can effectively inhibit αS aggregation and disrupt the preformed αS fibrils. However, the atomistic details of αS-DA/NE interaction remain unclear. Here, using molecular dynamics simulations, we investigated the binding behavior of DA/NE molecules and their structural influence on αS44−96 (Greek-key-like core of full length αS) protofibrillar tetramer. Our results showed that DA/NE molecules destabilize αS protofibrillar tetramer by disrupting the β-sheet structure and destroying the intra- and inter-peptide E46−K80 salt bridges, and they can also destroy the inter-chain backbone hydrogen bonds. Three binding sites were identified for both DA and NE molecules interacti... [more]

An equilibrium model is applied to study the effect of forced temperature gradients introduced through heat exchange via specific segments of the wall of a chromatographic column operating with a liquid mobile phase. For illustration of the principle, the column is divided into two segments in such a manner that the first segment is kept at a fixed reference temperature, while the temperature of the second segment can be changed stepwise through fixed heating or cooling over the column wall to modulate the migration speeds of the solute concentration profiles. The method of characteristics is used to obtain the solution trajectories analytically. It is demonstrated that appropriate heating or cooling in the second segment can accelerate or decelerate the specific concentration profiles in order to improve certain performance criteria. The results obtained verify that the proposed analysis is well suited to evaluate the application of forced segmented temperature gradients. The suggeste... [more]

The extraction of phytochemical compounds from intact red sorghum grains was developed as an alternative process for producing bioactive material in the pharmaceutical industry. A mechanistic model is needed to better understand the process and enable predictive simulations for designing commercial-scale extraction systems. This paper presents a mathematical model for predicting phytochemical concentrations in the solvent and inside the pericarp of the grain at different positions during the extraction. The model is based on the mass transfer mechanism from inside the pericarp to its solid surface by diffusion, and then from the surface to a solvent during the extraction of bioactive compounds. It was numerically solved while using finite-difference approximation. The parameters considered were effective diffusivity inside the pericarp (Dep), mass transfer coefficient from the pericarp surface to the solvent (kc), and distribution coefficient (H). The model simulates the extraction per... [more]

The sleeve regulating valve is widely used in the pipeline systems of process industries to control fluid flow. When flowing through the sleeve regulating valve, the water is easy to reach cavitation because of the pressure drop in the partial region, which may cause serious damage to pipeline system. In this paper, the pressure drop and cavitation characteristics in the sleeve regulating valve for different pressure differences and valve core displacements are investigated using a multiphase cavitation model. The pressure drop, velocity and vapor volume distribution in the regulating valves are obtained and analyzed. The total vapor volumes are also predicted and compared. The results show that the decrease of the valve core displacement induces the enlargement of the vapor distribution region and the increase of the vapor density. The increase of the pressure difference induces a more serious cavitation. The pressure difference has a slight influence on the cavitation intensity and d... [more]