Biomass can be considered an alternative to coal in the production of heat and electricity. Many types of biomass are waste from agriculture and the food industry. This waste is cheap, readily available, and replenished annually. However, most agricultural and food industry wastes (sugar cane pulp, olive and sunflower oil production wastes, straw, etc.) have ash with a low melting point. This leads to a rapid growth of ash deposits on the heating surfaces of boilers; as a result, the actual efficiency of boilers in which waste from agriculture and the food industry is burned is 45−50%. Known biomass pre-treatment technologies that allow for the fuel characteristics of biowaste. For example, leaching of biowaste in water at a temperature of 80−240 °C makes it possible to drastically reduce the content of alkali metal compounds in the ash, the presence of which reduces the melting point of the ash. However, this biomass pre-treatment technology is complex and requires additional costs fo... [more]

Due to industrialization and an exponential increase in population, the demand for vehicles has increased in Kuwait. Utilizing fossil fuels to power vehicles that are in high demand has posed various environmental and medical implications. Considering the emission-free feature of electric vehicles (EVs), moving towards “EV readiness” is the need of the hour. This can be further enhanced by adopting alternative sustainable technologies such as photo voltaic (PV) charging of EVs, to potentially eliminate or significantly reduce the reliance on fossil fuel while simultaneously decreasing harmful emissions. As Kuwait does not manufacture cars, it imports all vehicles and their parts, including internal combustion engines (ICEs) and EVs. To find out the challenges to uplifting Kuwait’s “EV readiness” this study delved into the performance of a typical EV car in Kuwait’s weather conditions. This includes the investigation of parameters that influence the energy requirements in an electric ve... [more]

Accelerating the promotion of the green transition can help to achieve high-quality development in manufacturing industries. In terms of policies that encourage the transition to green production, carbon trading is a direct and effective means of achieving this goal, and the carbon price is an important regulator in trading. Normally, firms respond to carbon prices by making three behavioral choices: production restrictions, pollution reduction, and the technological transition to green production. This study examines the effect of carbon price volatility on the decision to conduct green production, i.e., transforming to sustainable technologies and processes. In addition, this paper also investigates whether organizational resource slack and organizational technical standards moderate the relationship between the carbon price volatility and firms’ green transitions. The results suggest that a steadily increasing carbon price will motivate firms to make a green transition, but if the c... [more]

Future carbon dioxide capture and storage (CCS) will be impacted by the new scenario in which the energy supply rapidly shifts from oil-based to natural gas-based means, but this shift also presents an opportunity to utilize natural gas hydrates (NGHs). This review discusses the present state of CCS research and development, the advantages of the various approaches, and the barriers to commercialization that exist today. It also provides an evaluation of certain practical small- and large-scale CCS applications. The high initial investment, as well as ongoing maintenance costs, plague today’s commercially accessible CO2 capture technologies, including absorption, adsorption, membranes, and cryogenic separation. Gas hydrate-based capture has the potential to become the dominant method for CO2 separation because of the high recovery rates and purity it provides. Hydrate-based technologies, including CO2 capture, CO2 separation, and transportation, can also be used to reduce greenhouse ga... [more]

In recent years, global automotive industries are going through a significant revolution from traditional internal combustion engine vehicles (ICEVs) to electric vehicles (EVs) for CO2 emission reduction. Very similarly, the aviation industry is developing towards more electric aircraft (MEA) in response to the reduction in global CO2 emission. To promote this technology revolution and performance advancement, plenty of electronic devices with high heat flux are implemented on board automobiles and aircraft. To cope with the thermal challenges of electronics, in addition to developing wide bandgap (WBG) semiconductors with satisfactory electric and thermal performance, providing proper thermal management solutions may be a much more cost-effective way at present. This paper provides an overview of the thermal management technologies for electronics used in automobiles and aircraft. Meanwhile, the active methods include forced air cooling, indirect contact cold plate cooling, direct con... [more]

The purpose of this article was to identify the characteristics of HRM (Human Resources Management) portals that can contribute to building a smart, sustainable society in two countries: Poland and Türkiye. The analyzed countries were selected due to their similar economic situation, as well as differences in terms of culture and customs and varying degrees of ICT (Information and Communications Technology) implementation in the economy. Conducting the survey at this particular moment was intended to objectivize users’ opinions on the HRM portals and their attributes that may contribute to mitigating the effects of the crisis and facilitating economic development toward the creation of a sustainable society. The survey was conducted in April 2022. It was carried out in both countries and covered a group of more than 850 respondents. The CAWI (Computer Assisted Web Interview) method was used in the survey. The differences between results were identified, and the degree of verification o... [more]

The crosslinked polyethylene (XLPE) cable safety is affected by environmental factors and artificial defects during operation. This work proposes an improved locating method based on broadband impedance spectrum (BIS) to locate local defects in XLPE cables. The calculation process of the algorithm has been analyzed. The selection of the incident Gaussian signal and the peak recognition method have been discussed, where the pulse width of the Gaussian signal was found to be determined primarily by the upper limit frequency of the traveling wave transmitting in the cable. The centroid and function fitting methods were established to reduce the peak recognition error caused by the test sampling rate. This work verified the accuracy of the algorithm through experiments. A vector network analyzer (VNA) was used to test the BIS of the cable. A 20 m-long cable containing abrasion and an inserted nail with different depths was measured in the BIS test. It was found that the abrasion and the na... [more]

One quarter of global energy consumption goes towards meeting transport needs. In Europe, the share of energy for transport is much higher and accounts for about a third. Therefore, it is very important to monitor the sustainable development and progress of the sector. This paper seeks to develop a framework for the sustainability assessment of road transport in EU countries and to evaluate the countries’ achievements in the last decade. The research adheres to the provision that the developed framework should be easily applied in future studies. Therefore, significant attention is paid to the selection of indicators and their availability, as well as the selection of the research instrument itself. The multi-criteria decision-making (MCDM) technique TOPSIS has been applied for calculations and countries’ ranking, in order to compare countries’ achievements in the last decade (2010−2020). The last ten years’ analysis allows us to identify the direction of individual countries in develo... [more]

Poly-generation systems are an exciting new technology that provide an alternative to separating existing energy production methods in buildings. A poly-generation system enables the efficient simultaneous production of heating, cooling, fresh water, and electricity, resulting in many technological, economic, energy recovery, and environmental advantages. This study numerically investigates three proposed novel solar-driven poly-generation systems (BS, IS-I, and IS-II) integrated with organic Rankine cycle (ORC), humidification-dehumidification desalination system (HDH), and desiccant cooling system (DCS) with different heat recovery system arrangements. The suggested systems supply residential structures with energy, space conditioning, domestic heating, and fresh water. The effects of system operating circumstances on productivity and performance characteristics and several organic working fluid types (n-octane, R245fa, R113, isopentane, and toluene) on optimum system performance hav... [more]

Fertilization is an essential element in plant cultivation. Supplying the right amounts of nutrients allows plants to grow and develop. Due to the rising price of mineral fertilizers, other fertilizers and soil conditioners are growing in importance. One of these is the digestate produced in agricultural biogas plants. Due to its properties, the digestate can be used directly as a fertilizer. In this case, the effects of application can both change the soil environment and directly affect plant growth. Physical, biological, and thermal transformations can also produce products based on the digestate or its fractions, which can be successfully used for fertilizer purposes. Among other things, this paper discusses the production and use of composts, biocarbon, and/or fertilizer granules from the solid fraction of the digestate. Numerous scientific studies, including the authors’ own research in this article, indicate that digestate can be successfully used as fertilizer, both without pro... [more]

Road transportation has received the attention of researchers due to its higher carbon footprint. Alternative fuels present major advantages in terms of environmental sustainability. For this reason, an enviro-economic analysis of alternative fuels carries great significance. However, scarce attempts have been rendered in order to ascertain the impact of a hydroxy gas (HHO) and compressed natural gas (CNG) mixture on sustainable environmental development. The current study addresses this issue by employing an HHO−CNG mixture and gasoline in spark ignition (SI) engines for the purposes of performance and environmental pollutants measurement. Then, engine emission data were substituted for Weibull distribution in order to establish suitability for 50 and 95% confidence intervals (CIs). The mixture outperformed gasoline in terms of brake-specific fuel consumption (BSFC) and emission contents. On average, hydroxy gas with CNG produced 10.59% lower oxides of nitrogen (NOX) comparative to ga... [more]

Graptolite-rich shale is the main layer of shale gas resources in the southern marine sedimentary basin. Recently, shale gas resources were discovered in the Ordovician marine graptolite-rich strata in the Ordos Basin. The graptolite shale in the study area is different from the marine graptolite shale in the Yangtze plate in southern China, and further exploration is needed. This paper presents core samples of the graptolite-rich shale of the Pingliang Formation in the southwest Ordos Basin as research objects. The graptolite genus and graptolite shale characteristics were studied using core observation, electron microscopy, scanning electron microscopy, and geochemical analysis. We determined the role of the sedimentary environment and thermal maturation of graptolite shale in hydrocarbon formation and explored the possibility of hydrocarbon generation. Many graptolite epidermises provide buried organic matter. The quiet sea and low-energy marine environment create favorable conditio... [more]

With smart grid advances, enormous amounts of data are made available, enabling the training of machine learning algorithms such as deep reinforcement learning (DRL). Recent research has utilized DRL to obtain optimal solutions for complex real-time optimization problems, including demand response (DR), where traditional methods fail to meet time and complex requirements. Although DRL has shown good performance for particular use cases, most studies do not report the impacts of various DRL settings. This paper studies the DRL performance when addressing DR in home energy management systems (HEMSs). The trade-offs of various DRL configurations and how they influence the performance of the HEMS are investigated. The main elements that affect the DRL model training are identified, including state-action pairs, reward function, and hyperparameters. Various representations of these elements are analyzed to characterize their impact. In addition, different environmental changes and scenarios... [more]

The aim of this paper was to evaluate the characteristics and the energy potential for the methane production of fine screenings collected from the primary stage of a municipal wastewater treatment plant, and assess the impact on the properties and the oxygen demand of the aqueous effluents downstream from the sieves. Commercial filter bags with sieve openings of 3000, 1250, 1000, and 300 μm were used for the collection of screenings following a measurement of their biochemical methane potential. It was revealed that solid fractions from the sieves with a large size presented a high net methane production capacity exceeding 900 mL/g VS, but the gas production rate was rather slow, requiring a long time to reach the final value. However, cumulative solid fractions containing particles with a size larger than 300 μm had a lower net methane production, about 700 mL/g VS, but with a faster rate, resulting in almost 80% of the total volume released in 30 days. Aqueous samples downstream fro... [more]

The built environment sector is responsible for a significant proportion of the final global energy consumption [...]

In the research carried out by the authors, an approach to the assessment of the project environment of technologically integrated “European Green Deal” projects using corn waste was developed, which takes into account the changing project environment, which determines the risk of the specific cost of disposal of corn waste. On the basis of the predicted approach and the established trends of changes in the specific volume of corn food products from its yield, as well as the specific cost of disposal of corn waste from its specific volume under the condition of maintaining the balance of organic carbon in the fields, a computer program in the Python 3.9 language was developed. The program makes it possible to speed up calculations and perform a quantitative assessment of the state of the project environment in certain regions of the implementation of projects of the “European Green Deal” (TIP of the EGD) using corn waste. An approach to assessing the state of the project environment of... [more]

As the impacts of environmental change become more severe, reliable and sustainable power generation and efficient aerodynamic power collection of onshore and offshore wind turbine systems present some of the associated key issues to address. Therefore, this review article aims to present current advances and challenges in the aerodynamic power extraction of wind turbines, associated supporting technologies in pitch, yaw, and torque control systems, and their advantages and implications in the renewable energy industry under environmental challenges. To do this, first, mathematical modeling of the environmental characteristics of the wind turbine system is presented. Next, the latest technological advances consider the environmental challenges presented in the literature, and merits and drawbacks are discussed. In addition, pioneering research works and state-of-the-art methodologies are categorized and evaluated according to pitch, yaw, and torque control objectives. Finally, simulati... [more]

In the transition towards a sustainable world with a “green horizon” (something that is also of great importance to the policy of energy self-sufficiency in housing and self-consumption), geothermal energy is seen as quite a feasible alternative for single-family homes. This article focuses on a comparison between the environmental impact and life cycle analysis of three alternatives and provides a base case for the replacement of a conventional type of boiler with a geothermal one for a typical house located in a Mediterranean climate. The first alternative (A) consists of a horizontal catchment system through a field of geothermal probes. The second alternative (B) is a shallow water catchment system, open type, with the return of water to a nearby river. The third option studied (C) is also a shallow water catchment system but with the water, return injected into a well downstream to the underground water flow. The study shows that alternatives A and B have the least environmental i... [more]

A direct absorption parabolic trough solar collector (DAPTC) integrated with porous foam as a volumetric absorber has the potential to be applied as an energy conversion integrant of future renewable energy systems. The present study comprehensively analyzes a DAPTC in terms of exergy, economic, and environmental analysis for different porous configuration inserts in the absorber tube. Ten different arrangements of porous foam are examined at several HTF flow rates (40−120 L/h) and inlet temperatures (20−40 °C). The exergy efficiency, entropy generation, Bejan number, and pumping power are investigated for all cases. Obtained results indicate that fully filling the absorber tube with porous foam leads to a maximum exergy efficiency of 20.4% at the lowest inlet temperature (20 °C) and highest flow rate (120 L/h). However, the Bejan number reaches its minimum value due to the highest pumping power in this case. Consequently, all mentioned performance parameters should be considered simul... [more]

This study presents a simple indoor air quality diagnosis program for school office spaces, which are occupied for long durations by teachers, and indoor sports facilities, whose utilization has been on the rise in response to high concentrations of pollutants in outdoor air. The proposed program was made with Visual Basic for Applications (VBA) and Microsoft Excel. This program requires inputs which can be easily determined or measured even by nonexperts and can check the current status of indoor air quality such as CO2 and PM2.5 concentrations and predict the effect if changes are made. In addition, it is possible to diagnose indoor air quality before and after class and compare it with the initial plan so that if it exceeds the indoor air quality maintenance standard range, it can be improved by using a ventilation system and an air purifier. The development of the program was divided into four stages. First, prior research on the influencing factors was investigated. Second, influe... [more]

The main sources of environmental pollution with heavy (ecotoxic) metals include industry, including utility and municipal power engineering, but also waste incineration plants. Fuel shortages and their constantly growing prices raise concerns that energy will be commonly obtained from waste outside of installations intended for this purpose (i.e., outside waste incineration plants). The greatest concern stems from the risk of burning waste in low-power boilers—domestic boilers. Waste incineration plants and utility power plants are equipped with flue gas cleaning installations (FGD), but low-power boilers are not. The exhaust gases are directly introduced into the atmosphere, which results in the introduction into the air of, inter alia, toxic heavy metals. Therefore, it is necessary to conduct activities aimed at retaining ecotoxic metals in the solid−slag residue. The paper presents the results of laboratory tests of the emission capacity of Cd, Cu, Zn bound in various chemical form... [more]

Successful energy transitions, also referred to as leapfrog development, present enormous prospects for EU nations to become carbon neutral by shifting from fossil fuels to renewable energy sources. Along with climate change, EU countries must address energy security and dependency issues, exacerbated by factors such as the COVID-19 pandemic, rising energy costs, conflicts between Russia and Ukraine, and political instability. Diversifying energy sources, generating renewable energy, increasing energy efficiency, preventing energy waste, and educating the public about environmental issues are proposed as several strategies. The study draws the conclusion that central European countries may transition to a clean energy economy and become carbon neutral on economic and strategic levels by locating alternative clean energy supply sources, reducing energy use, and producing renewable energy. According to the study, the EU energy industry can be decarbonised and attain energy security using... [more]

This study aims to investigate, from a technical and an environmental perspective, various alternatives for acetic acid concentration for maximizing acetic acid production, its purity, and in the meantime, minimizing the energy usage and the environmental impact. Liquid−liquid extraction followed by azeotropic distillation using different solvents such as: (i) ethyl acetate, (ii) isopropyl acetate, and (iii) a mixture containing isopropyl acetate and isopropanol were first explored, using process flow modeling software. The three cases were compared considering various technical key performance indicators (i.e., acetic acid flow-rate, acetic acid purity, acetic acid recovery, power consumption, thermal energy used, and number of equipment units involved) leading to the conclusion that the usage of the isopropyl acetate—isopropanol mixture leads to better technical results. The isopropanol-isopropyl acetate mixture was furthermore investigated in other two cases where process intensific... [more]

Modern environmental problems are caused by increased energy consumption and the urban heat island effect. Urban noise pollution is another big problem in the Megacities. Ensuring safety with reducing hazards in the urban space is one of the priority tasks of the urban city centers. One solution is the use of green technologies in the construction of office and residential real estate. In this research, we provide the analysis of reducing the noise impact through the use of different green wall systems, such as modular, hydroponic and container, analyzing their benefits and disadvantages in terms of operation and maintenance. After that, we chose hydroponic systems as the most efficient ones and examined different conditions of the system and how these types reduce the noise analyzing absorption coefficient. As a result, we found out that the efficiency of the hydroponic green wall system depends on the humidity of the substrate and the presence of the plants, which confirms the import... [more]

Low global warming potential (GWP) refrigerants for the next-generation air conditioning systems have been investigated with target domestic applications. High-GWP refrigerants are mostly used in climate control applications such as heating, ventilation and air conditioning (HVAC) and refrigeration systems. The majority of refrigerants are responsible for significant environmental issues such as ozone layer depletion and global warming. The Montreal Protocol and the Kyoto Protocol have been implemented to address such issues. In the meantime, authorities in many countries have taken the initiative to phase out the usage of environmentally harmful refrigerants in vapor compression refrigeration systems. Following the global warming mitigation scheme by many signatory countries, research interest has been focused on finding alternative refrigerants with low or ultra-low GWP. This study considered the research trend and development of low-GWP refrigerants while examining system performanc... [more]