In recent years, an alarming increase in CO2 emissions has been noticed [...]

Offshore geological sequestration of CO2 offers a viable approach for reducing greenhouse gas emissions into the atmosphere. Strategies include injection of CO2 into the deep-ocean or ocean-floor sediments, whereby depending on pressure−temperature conditions, CO2 can be trapped physically, gravitationally, or converted to CO2 hydrate. Energy-driven research continues to also advance CO2-for-CH4 replacement strategies in the gas hydrate stability zone (GHSZ), producing methane for natural gas needs while sequestering CO2. In all cases, safe storage of CO2 requires reliable monitoring of the targeted CO2 injection sites and the integrity of the repository over time, including possible leakage. Electromagnetic technologies used for oil and gas exploration, sensitive to electrical conductivity, have long been considered an optimal monitoring method, as CO2, similar to hydrocarbons, typically exhibits lower conductivity than the surrounding medium. We apply 3D controlled-source electromagn... [more]

Background: Bioenergy attracts much attention due to the global demand for renewable and sustainable energy resources. Waste biomass feedstocks—date pits, coffee waste, and cow dung—require efficient and environmentally friendly waste-management technologies such as pyrolysis. Fast pyrolysis occurs at fast heating rates (10−100 °C/s), generates high bio-oil yields, and is the most widely used process for biofuel generation. The aim of the study is to compare the effect of pyrolysis between single, binary, and ternary feeds on thermal degradation behavior and bio-oil composition. Methods: Thermogravimetric analysis (TGA) was conducted at 30 °C/min from room temperature to 850 °C to understand the thermal degradation behavior of the biomasses. A Pyroprobe® reactor—a micro-scale pyrolyzer—was used to conduct the fast pyrolysis at 500 °C with a heating rate of 10 °C/s, and the volatile contents were quantified using a gas chromatograph−mass spectrometer (GC/MS). Results: The (TGA) showed t... [more]

An energy transition is in progress around the globe, notably led by an increase in the deployment of renewable energy and a shift toward less emissions-intense options, notably in the transportation sector. This research investigates the potential role that new transportation options, namely flying vehicles, may play toward progressing the energy transition. As flying vehicles are a relatively new technology yet to penetrate the market, it is also prudent to consider the ethical, legal, and social issues (ELSI) associated with their implementation, alongside the potential energy and environmental impacts. Through a review of ELSI and energy and environmental literature, we identify research gaps and identify how flying vehicles may impact upon the energy transition over time. Our research identifies several critical aspects of both ELSI and energy and environmental academia relevant to the future deployment of flying vehicles and describes a deployment timeline and the resultant socie... [more]

As a new passive cooling technology, space radiation cooling has great potential for development because the cooling itself has no energy consumption, and the radiation heat exchanger does not affect the appearance, with low noise and low cost. Several rectangular stainless steel plates coated with RLHY-2 material are used as the transmitter for the field test. The experimental results show that, in the case of no windscreen, the increase of outdoor humidity will reduce the cooling effect, and the greater the humidity, the more pronounced the reduction effect. Significantly when the humidity increases from 78% to 90%, the cooling power of the cooler reduces from 102 to 67 W/m2. The thickness of the cloud layer also affects the cooling effect of the space radiative cooler. Compared with the clear weather, the cooling power of the cooler is reduced by 11.65 W/m2 on average under foggy weather conditions. Compared with the force-1 wind and the force-3 wind, the cooling effect of the coole... [more]

Despite the fact that in the mass consciousness nuclear power is associated with increased environmental risks, this type of energy today remains one of the cleanest, most efficient and carbon neutral. Further development of nuclear energy is hampered by the problem of appropriate handling of spent nuclear fuel (SNF). A very attractive concept of the closed nuclear cycle has been developed to solve it. A real-life implementation of this concept requires the development of technological processes for the efficient separation of minor actinides from the rest of the SNF components. Recent progress in this area has been closely associated with N,O-hybrid donor ligands for liquid−liquid extraction. This work systematically reviews the available literature on the topic and provides detailed explanations on the behavior of the most perspective ligands. Notably, another important aspect of the application of N,O-hybrid donor ligands in nuclear cycle analytics through their incorporation in che... [more]

The superparamagnetic Fe3O4 nanoparticles as an absorbent with a size distribution of 4.8−6.4 nm were synthesized using a simple one-pot hydrothermal strategy at 200 °C for 24 h, where iron citrate and distilled were the sum total of raw materials. The as-synthesized Fe3O4 powders showed rapid and efficient adsorption for xylenol orange with a saturated adsorption amount of 42.5 mg/g according to Langmuir linear fitting, and the adsorption reaction between xylenol orange adsorbate and Fe3O4 adsorbent was mostly completed within 10 min. The Fe3O4 nanoparticles not only had superparamagnetism with a saturation magnetization value of 54.9 emu/g at 15 kOe but also possessed strong magnetic response, making them easy to separate easily from aqoeous solution under the attraction of magnet. In this work, the Fe3O4 particles can be totally attracted toward the magnet within 15 s, leaving the suspension a clear solution.

The encouraging Design for Disassembly appears in the literature more and more often. Such a design appears to offer clear environmental advantages. However, there are still not enough research results to support the existence of these benefits. The authors using the Life Cycle Assessment method, which assesses the energy consumption and greenhouse gas emissions during the demolition and operation of steel structure. Steel is completely recyclable and, in terms of tonnage, is the most recycled material worldwide. We assessed three scenarios: (1) complete re-remelting (recycling) of the structure; (2) partial reuse of construction elements + remelting (recovery + recycling); and (3) complete reuse of the structure (recovery). GaBi software was used for the analysis. It was found that the environmental impact varied significantly among the examined scenarios. The first scenario poses the greatest environmental burden. However, compared to Scenario no. 1, Scenario 3’s environmental impact... [more]

Lithium-ion batteries (LIBs) are crucial for consumer electronics, complex energy storage systems, space applications, and the automotive industry. The increasing requirements for decarbonization and CO2 emissions reduction affect the composition of new production. Thus, the entire automotive sector experiences its turning point; the production capacities of new internal combustion engine vehicles are limited, and the demand for electric vehicles (EVs) has continuously increased over the past years. The growing number of new EVs leads to an increasing amount of automotive waste, namely spent LIBs. Recycling appears to be the most suitable solution for lowering EV prices and reducing environmental impacts; however, it is still not a well-established process. This work is the second part of the review collection based on the performed literature survey, where more than 250 publications about “Recycling of Lithium-ion Batteries from Electric Vehicles” were divided into five sections: Recy... [more]

The sustainability index, waste energy ratio and improvement potential of a staggered air jet impingement on the staggered spherical protrusions of a roughened absorber plate were derived for the present study to evaluate exergy losses and irreversibility in the system. The experimental analysis was carried out for selected parameters: relative streamwise pitch, relative spanwise pitch and relative jet diameter to hydraulic diameter ratio. The flow Reynolds number ranged from 4000−18,000. The augmentation in Nusselt number and friction factor compared to a smooth surface was 4.9 and 12.4 times, respectively. The statistical correlation developed determined the maximum thermohydraulic performance parameter and exergetic efficiency be 3.02 and 3.87%, respectively. The magnitude of the sustainability index, waste energy ratio and improvement potential was found to be 1.0347, 0.962 and 10.84, respectively, for the entire range of tested parameters. A cost analysis was also performed to eva... [more]

Comfort temperature is important to investigate because the chosen office indoor temperatures affect the energy used in a building, and a thermally comfortable environment makes the occupants be more productive. The effects of temperature on comfort are broadly recognized for thermal comfort. Japanese office buildings are well equipped with air-conditioning systems to improve the thermal comfort of the occupants. The main objectives of this research were to compare the winter comfort temperature in mixed mode (MM) and heating, ventilation and air-conditioning (HVAC) office buildings and to investigate the relationship between the comfort temperature and the indoor air temperature. This study measured the thermal environmental conditions of the office buildings and surveyed the thermal comfort of the occupants. The field survey was conducted during winter in seven office buildings located in the Aichi prefecture of Japan. In total, 4466 subjective votes were collected from 46 occupants.... [more]

Due to anticipated energy shortages and the need to achieve climate goals, there is an urgent requirement for transition towards a green, resilient system of energy provision. This transition is hampered because important players in energy markets (governments and oligopolies), while supporting large-scale solutions, avoid or block systemic changes. This rejection of systemic change is strengthened by the dominant social paradigm, which ignores systemic vulnerabilities, treating resources as solutions and the environment as a sink. In its turn, the dominant social paradigm is contested by the new ecological paradigm and by attitudes towards sustainable business practices. Understanding this framework may be relevant for identifying decision-makers’ perception of system risk, and thus for supporting a transition towards a more decentralized and resilient energy supply. In this context, this paper presents an empirical study among Polish students of a business university (N = 393), tryin... [more]

E-grocery is fast growing worldwide and represents a relevant issue for city logistics. Although in almost all countries the percentage of food e-buyers was lower than those purchasing other commodity categories, due to the pandemic, they have increased significantly in the last two years, with consequences that are difficult to fathom and estimate. This phenomenon therefore deserves more attention, especially with respect to its environmental impact, mostly at the urban scale. This paper presents a systematic literature review (SLR) on how e-grocery impacts the environment through the CO2 emissions generated and the equivalent energy consumption. The methodology used for the review follows a standard approach, with different combinations of keywords used for the search performed in SCOPUS and the Web of Science databases. Emissions and energy consumption assessments were performed for all of the papers considered. The results point to two different findings: some studies consider onli... [more]

New York State’s (NYS) Climate Leadership and Community Protection Act (CLCPA) requires that 100% of the state’s electricity supply be greenhouse gas emissions-free by 2040 and that 6000 megawatts (MW) of solar energy must be installed in NYS by 2025. This study aims to evaluate the environmental impact of electricity generation from New York State distributed solar photovoltaic systems. This cradle-to-grave life cycle assessment (LCA) follows the International Standardization Organization (ISO) framework for LCA, including the goal and scope definition, inventory analysis, impact assessment, and interpretation. The study is based on operational data from 120 existing solar installations. Global Warming Potential varies substantially by site, with the minimum and maximum impact values varying from 25.2 to 88.5 gCO2eq/kWh, and with a mean of 45.6 gCO2eq/kWh. Regression analysis shows this range is attributable to differences in site location, capacity factor, and system design (i.e., mo... [more]

Using palm oil mill effluent (POME) to produce biogas is an alternative and sustainable way to control POME GHG emissions while also providing economic benefits. The increasing area of oil palm plantations encourages an increase in palm oil production and the generation of POME in Indonesia. This could increase potential GHG emissions and global warming. In contrast, biogas power plants from POME are less attractive for economic investment in Indonesia. However, as the world’s largest palm oil producer, Indonesia still lacks techno-economic and environmental studies of biogas power generation from POME. This study aimed to evaluate the technical, economic, and environmental aspects of the biogas power generation from POME at the study site (Bangka Island, Indonesia). The result shows that the biogas plant at the study site can reduce COD levels of POME by up to 91% and produce biogas at 325,292 m3/month, with a 55% methane content. Biogas can be converted into electrical energy at 696,... [more]

Corporate economic performance and its association with carbon emissions has been the subject of extensive research within the last few decades. The present study examines the economic performance of green firms as reflected in the Financial Times Stock Exchange Environmental Opportunities Index Series (FTSE EO) and its association with carbon emissions, incorporating the role of two more indices, namely the Baltic Clean Tanker Index (BAIT) and EUR/USD exchange rate. The methodology employed is the Bayesian Vector Autoregression Model (BVAR). Our findings confirm the interlinkages among the variables studied. More specifically, based on impulse response analysis, the direction of causality is two-way. The response of carbon emissions to a shock in the other variables is negative for the case of the EUR/USD exchange rate and Baltic Clean Tanker Index (BAIT) (an index representing the conventional energy sources), while it is positive for a shock in the FTSE EO. However, the most importa... [more]

This research uses an inductive inference approach supported by a literature study and deductive reasoning supported by a case study method. This article is based on a comprehensive literature review which was a foundation for preparation a planned research in organizations implementing the EFQM 2020 Model in order to build a strategy for sustainable development and energy conservation. EFQM is an abbreviation for the name of the European Foundation for Quality Management, a member organization associating entities interested in building lasting value and respecting the ethical principles of running a business. EFQM is headquartered in Brussels, and the partners operate in dozens of countries around the world. The case study methodology is used to present a strategic approach to environmental protection and energy conservation in terms of the EFQM 2020 Model guidelines on the example of an international manufacturing company. The main area of activity is the automotive industry, which... [more]

The effect of temporal variation in chemical composition on methane yields of rendering plant wastewater was studied in batch experiments at 37 °C. In total, 14 grab samples were collected from Monday through Friday (Day 1 to 5) from a rendering plant located in Queensland, Australia. Each day, three samples were collected: early morning (S1), midday (S2) and afternoon (S3). Chemical analyses showed that a significant different in total solids (TS), volatile solids (VS), and chemical oxygen demand (COD) was noticed among the samples. TS content ranged from 0.13% to 1.82% w/w, while VS content was between 0.11% and 1.44% w/w. Among the samples, S2 of Day 3 had the highest COD concentration (10.5 g/L) whilst S1 of Day 1 had the lowest COD (3.75 g/L) and total volatile fatty acid (VFA) concentration (149.1 mg/L). In all samples, acetic acid was the dominant VFA and accounted for more than 65−90% of total VFAs. Biochemical methane potential studies showed that the highest methane yield of... [more]

The incessant power outages that characterize the Nigerian power network (NGP), as in all developing countries, are not limited to the shortage of fuel for power generation. However, differential power shortages between the generated power and the load demand are alarming. In this study, we propose a new voltage stability pointer (NVSP) based on a reduced one-line power network to act as a classifier. The NVSP was trained with a support vector machine (SVM) using a medium Gaussian kernel classification toolbox (mGkCT) in the MATLAB environment. This classification is based on the power network susceptibility to voltage instability. NGP 28-bus 330 kV data were extracted and modeled in the MATLAB environment and tested with the NVSP-mGkCT classifier. The NVSP-mGkCT was able to classify the lines viz. stable and unstable lines for the base and contingency cases. Similarly, the linear load dynamics and non-linear load dynamics were evaluated on the basis of critical buses using the NVSP. T... [more]

This paper calculates and analyzes the collision and freezing characteristics of water droplets on the cylindrical conductors with different diameters and deduces the variation law of icing weight change rate on different diameters rotating cylindrical conductors with wind speed, ambient temperature, liquid water content, and median volume diameter. Then, a prediction and value-seeking method of icing environment parameters based on rotating circular conductors is determined. The laboratory test results show that the measured values of ambient temperature T, wind speed U, liquid water content w and median volume diameter MVD are in good conformity with the reference values measured by other instruments, and the average errors of each parameter are 3.41%, 5.44%, 6.08% and 7.20%, respectively. The field natural experiment was carried out at Hunan Xuefengshan Energy Equipment Safety National Observation and Research Station. The obtained icing environmental parameters were substituted int... [more]

Hydrogen is an energy carrier in which hopes are placed for an easier achievement of climate neutrality. Together with electrification, energy efficiency development, and RES, hydrogen is expected to enable the ambitious energy goals of the European Green Deal. Hence, the aim of the article is to query the development of the hydrogen economy in the Visegrad Group countries (V4). The study considers six diagnostic features: sources of hydrogen production, hydrogen legislation, financial mechanisms, objectives included in the hydrogen strategy, environmental impact of H2, and costs of green hydrogen investments. The analysis also allowed to indicate the role that hydrogen will play in the energy transition process of the V4 countries. The analysis shows that the V4 countries have similar approaches to the development of the hydrogen market, but the hydrogen strategies published by each of the Visegrad countries are not the same. Each document sets goals based on the hydrogen production t... [more]

Electric and magnetic fields accompany technical personnel in their working environment (work exposure). That is why many countries have the appropriate regulations. The impact of electric and magnetic fields on humans is still not fully recognized. This is the reason why the limit values of its intensity in many countries differs significantly. The article presents changes in the stress limits of the electric and magnetic fields in Poland at the turn of the last dozen years. The last such change was the result of a Directive of the European Union (2013/35/EU). The effects of changes in limit values on the working conditions of technical personnel performing diagnostics of high voltage transformers or working in the immediate vicinity of such transformers are presented. The article shows that recent changes have improved the working conditions of technical personnel in relation to the electric field and worsened the conditions taking into account the magnetic field.

An increase in the share of renewables in heat supply systems is a promising direction to reach sustainable development goals and decarbonization. Decision makers should consider various factors, including energy market prices, the availability of biofuels, boiler and auxiliary equipment costs, logistic costs, and the taxation system. In the European Union, the energy crisis causes a rapid increase in fossil fuel prices. Moreover, the use of fossil fuels results in greenhouse gas emissions, which threatens the achievement of sustainable development goals. We studied the influence of the delivery cost and the value of environmental tax rates on the levelized cost of heat. Low-capacity boilers (up to 1 MW) and different fossil and renewable fuels were analyzed. An analysis was carried out on the example of Ukraine. The European trends were factored in. The obtained results showed that biofuel boilers had lower levelized costs of heat than fossil fuel boilers. Delivery costs and environme... [more]

The primary objective of this research was to determine the impact of renewable energy, alternative and nuclear energy, urbanization, energy use, and fossil fuel energy consumption on Romanian economic development. To investigate the relation between variables, we employed the Autoregressive Distributed Lag (ARDL) technique in conjunction with FMOLS (Fully Modified Least Squares) and CCR (Canonical Cointegrating Regression). Long-run and short-run findings suggest that alternative and nuclear energy, as well as fossil fuel consumption, has a positive association with economic growth, but renewable energy, urbanization, and energy usage have an adversative relationship with economic growth. Similarly, FMOLS and CCR statistics indicate that alternative and nuclear energy and fossil fuel consumption have a favorable impact on economic development. Renewable energy consumption, urbanization, and energy use, on the other hand, revealed a negative connection with economic progress. Conservat... [more]

The evaporation, autoignition and micro-explosion characteristics of RP-3 kerosene droplets under sub-atmospheric pressure (0.2−1.0 bar) and elevated temperature (473−1023 K) were experimentally investigated using high-speed camera technology. The results showed that the droplet evaporation rate increased monotonically with increasing temperature and pressure under 573−873 K and 0.2−1.0 bar. The decrease of temperature and pressure was obviously detrimental to the successful autoignition of droplets and increased the ignition delay time. Autoignitions at 0.2 bar were very difficult and required an ambient temperature of at least 973 K, which was about 150 K higher than the minimum ignition temperature at 1.0 bar. Sub-atmospheric pressure environment significantly inhibits the formation of soot particle clusters during the autoignition of droplet. Reducing pressure was also discovered to reduce the likelihood of micro-explosions at 673, 773 and 823 K but increase the bubble growth rate... [more]