Different multilevel converter topologies have been presented for achieving more output voltage steps, hence improving system performance and lowering costs. In this paper, a hybrid multilevel inverter (MLI) topology is proposed for active-power-filter applications. The proposed MLI is a combination of two standard topologies: the cascaded H-bridge and the three-phase cascaded voltage source inverter. This configuration enhances the voltage levels of the proposed MLI while using fewer switches than typical MLI topologies. The proposed MLI was developed in the MATLAB/Simulink environment, and a closed-loop control technique was used to achieve a unity power factor connection of the PV modules to the grid, as well as to compensate for harmonics caused by nonlinear loads. To demonstrate that the configuration was working correctly and that the control was precise, the proposed MLI was constructed in a laboratory. A MicroLabBox real-time controller handled data acquisition and switch gatin... [more]

In 2010, the Energy Performance of Buildings Directive announced that all new buildings are to be nearly zero-energy as of January 2021. Having reached year 2022, it can be said that the transition has proven to be slower than anticipated. Transition research has long acknowledged the potential impact of the human factor in the process of change. While there is a relative wealth of literature on end-users and their perceptions as recipients of change within the demand end of the market, research on professionals and their perceptions as actors in the process of change is limited. Thus, this study looks at the human factor in the supply end of the market by bringing professionals’ perceptions to the forefront in its investigation of barriers to the implementation and uptake of nearly zero-energy housing in practice. As part of the project entitled Housing 4.0 Energy: Affordable and Sustainable Housing through Digitization, data were collected through a focus group and semi-structured in... [more]

Explosives are commonly used in the mining industry to extract minerals from hard rock deposits. Therefore, an efficient explosive should ensure that the appropriate blast outcome is achieved, taking into account the desired rock-breaking parameters and the costs of drilling and blasting works. Depending on the type of deposit and follow-up processes, a proper blast result may be characterized by fragmentation, muckpile shape, overbreaks, etc. Industry has struggled to respond to the demand for bulk emulsion explosives with improved energetic parameters, having so far been unable to do so safely, effectively, and cost-efficiently. Methods of improving blasting parameters mainly rely on introducing a variety of additives to the emulsion explosive formulation during production, which creates additional hazards at that stage. Alternative, safe methods of achieving an improved energetic performance of emulsion explosives are, therefore, highly desirable. This paper is focused on one such p... [more]

Many European and some other developed countries have addressed the use of geothermal energy systems as a renewable source of energy worthy of investment and development. Geothermal energy is a non-intermittent and potentially inexhaustible source that can be used for energy saving and environmental energy production, as well as to provide heating and cooling to buildings, by increasing the energy efficiency of conventional systems. This editorial paper collects the most significant and recent studies, dealing with geothermal source exploitation, the possible role of geothermal systems in the building retrofit measures, the use of shallow geothermal sources, and specific aspects of systems that exploit geothermal energy.

Nowadays, increased urbanization is visible in most European Union countries. At the same time, it can be noticed that in the studied period (2000−2018), GDP per capita increased, and CO2 emissions per capita and energy consumption per capita decreased. These trends should be assessed in an unequivocally positive way. Considering these trends, especially with regard to economic development, our research goal is to answer the following questions: is there a long-run relationship between urbanization, energy consumption, economic growth, and carbon dioxide emissions, and what roles do urbanization and energy consumption play in the concept of the environmental Kuznets curve? This study aims to contribute to this growing area of research by exploring the European Union countries in the period covering the accession of new member states from Central Europe that needs intensifying European environmental policy. In order to test cointegration, we used Pedroni and Westerlund’s panel tests. To... [more]

To avoid a sharp rise in temperature in the cabin of parked vehicles exposed to solar radiation, experienced drivers leave some windows partly open when the vehicle is parked in the sunlight to achieve cooling through natural ventilation. However, the effectiveness of this measure to reduce the temperature under different weather conditions has not been verified. To this end, this study investigates the effect of open windows on the thermal environment of a vehicle under different environmental conditions. A field measurement, in which two identical vehicles with and without window gaps were used, was carried out in Daxing District, Beijing. The measurements were conducted for 15 days under different window gaps and ambient conditions. The results revealed that open windows resulted in a maximum temperature reduction of 6.7 °C in cabin air temperature under high temperature and high solar radiation, while only 0.6 °C can be reduced under low temperature and low solar radiation. The res... [more]

In the modern era societies adopt further restrictions imposed via climate or global changes and are engaged in a dynamic innovative set of dealings. The environment site is inhabited by numerous artists, who perform in a synergic manner by placing emphasis on and implementation of actual sustainable development. In this perspective, we value environmental resource-conservation efforts (ERCE) of all actors, populations, mass media and specialists. This paper aims to analyze how different energy firms accomplished sustainable development through environmental resource-conservation efforts. In this study we discover that pollution reduction is directly linked with both variables and also plays a mediating role. A cross-sectional data collection technique was used. For testing study hypotheses, we selected energy firms. Results showed that sustainable development of energy firms are forecasted by environmental resource-conservation efforts. The findings confirmed that ERCE are directly li... [more]

The present day is marked by the economic expansiveness of societies and the adoption and adaptation of intelligent technologies. In this hyper-world, customers expect a personalized offer enhanced with customized service, which results in the introduction of sustainable and intelligent solutions—among other services. What becomes important is not so much the “Primum non nocere” of creation as much as the “go smart to the future” in creating. The smart logistics concept is a representation of this trend. The subject of the article is an analysis of the impact of the application of the smart idea in the field of sustainable development on changes in logistics in customer service at the last-mile stage. The source of this article is exploratory research of secondary sources, including books, articles, and reports, which has been subjected to a critical content analysis. The obtained results made it possible to design and implement an explanatory study of online-buying habits of people ba... [more]

It is known that the energy transition can be achieved not only with the use of renewable energy sources but also with a new conception and management of the electricity system. Renewable energy communities are then introduced as organizations for maximizing the self-consumption of energy produced from renewable energy sources. To ensure that these energy communities can operate, there is a need for enabling technologies that allow for monitoring, data and algorithms processing as well as the enabling of the same algorithms. There exists a huge confusion in the actual technologies useful to implement the energy communities. This paper first describes and groups the main enabling technologies, analyzing the services that can be offered. The scope is to emphasize the importance of having accurate, efficient and effective technologies that allow the implementation of such communities, underlining how such technologies interact with each other. Using such technologies is important to obser... [more]

As a country with not only significant production potential but also fragmented land ownership, the Kyrgyz Republic struggles with environmental efficiency, which is a strategic element of environmental management in agricultural production. The objective of this study was to assess the environmental efficiency of sheep’s wool when used as a fertilizer in bean production in northern Kyrgyzstan. In this study, the efficiency indicator was taken to be GHG emissions per functional unit of product, using a proprietary methodology for calculating GHG emissions to determine the true value of this material as a source of soil nutrients and organic matter. Two experimental factors were used in the experiment: fertilizer type and fertilizer rate. Fertilization with sheep wool resulted in a 15% higher bean yield compared to when fertilized with mineral fertilizers at a comparable rate, converted to pure nitrogen. By using sheep wool as a source of mineral nutrients for the plants, the carbon foo... [more]

The Carboniferous reservoir KT-II layer in the Eastern margin of the Pre-Caspian Basin was formed in the open platform sedimentary environment and marked by a complicated pore-throats structure. Understanding the main controls on the carbonate reservoir quality is of great significance for reservoir classification and a relevant production prediction. This study focuses on revealing reservoir pore-throats structure’s fractal characteristics by analyzing the mercury intrusion capillary pressure (MICP), with the integration of the pore-throats radius’ distribution data. The relationship between fractal dimensions and reservoir parameters such as physical properties, mercury median saturation pressure (Pc50) and the proportion of large-size (radius > 0.1 μm) pores demonstrate that the lower fractal dimension corresponds not only to core plug samples with higher permeability, but also to lower Pc50 and a higher proportion of large pore-throats. Three classes of carbonate reservoir with dif... [more]

This article presents the results of experimental and computational studies of the performance of a car with a gasoline engine with spark ignition when retrofitted with a system of liquefied petroleum gas (LPG). To analyze the impact of the use of LPG instead of gasoline, the mathematical model of the car’s movement according to the modes of the European driving cycle has been refined. It was established that when using LPG for a car in the driving cycle, fuel consumption in energy units decreases by 10.38%. Gas consumption, determined in mass units, is lower than gasoline consumption. In load modes, this difference is about 8% and in idle mode, it reaches 16−18%. The adequacy of the mathematical model is confirmed by experimental studies of the car on modern equipment with the measurement of fuel efficiency and environmental performance in motion, according to the specified cycle. The deviation of the calculated fuel consumption from the results of experimental studies does not exceed... [more]

The potential impacts and the environmental performance of the semi-aerobic landfill technology were assessed through the Life Cycle Assessment (LCA) methodology. Project data that referred to a hypothetical Italian plant design were used and ISO 14040/14044 standards were applied. All the life cycle phases were considered, from landfill construction to filling, aftercare, closure and conversion for future use. All the landfill processes and the inflow of materials, energy and rainwater, and the outflow of biogas and leachate, were included in the system boundaries. The results show that the overall environmental impacts associated to semi-aerobic landfill are primarily due to the filling and aftercare phases, but the impacts related to construction and closure phases are not negligible. The contribution analysis underlines the processes with major responsibility within the environmental profile, while the normalization of results demonstrates what are the environmental categories on w... [more]

In comparison to other methods, valorising food waste through pyrolysis appears to be the most promising because it is environmentally friendly, fast, and has a low infrastructure footprint. On the other hand, understanding the pyrolytic kinetic behaviour of feedstocks is critical to the design of pyrolysers. As a result, the pyrolytic degradation of some common kitchen vegetable waste, such as tomato, cucumber, carrot, and their blend, has been investigated in this study using a thermogravimetric analyser. The most prevalent model fitting method, Coats−Redfern, was used for the kinetic analysis, and the various mechanisms have been investigated. Some high-quality fitting mechanisms were identified and used to estimate the thermodynamic properties. As the generation of pyrolysis gases for chemical/energy production is important to the overall process applicability, TGA-coupled mass spectrometry was used to analyse the pyrogas for individual and blend samples. By comparing the devolatil... [more]

In the era of Industry 4.0, manufacturing and production systems were revolutionized by increasing operational efficiency and developing and implementing new business models, services, and products. Concretely, the milestone set for Industry 4.0 was to improve the sustainability and efficiency of production systems. By extension, the emphasis was focused on both the digitization and the digitalization of systems, providing room for further improvement. However, the current technological evolution is more system/machine-oriented, rather than human-oriented. Thus, several countries have begun orchestrating initiatives towards the design and development of the human-centric aspect of technologies, systems, and services, which has been coined as Industry 5.0. The impact of Industry 5.0 will extend to societal transformation, which eventually leads to the generation of a new society, the Society 5.0. The developments will be focused on the social and human-centric aspect of the tools and te... [more]

The aim of this article is to identify important factors that determine the strategy of the energy sector. It has been assumed that the determinants of this strategy are goals related to the energy security of a European Union member state and the reduction of environmental pollution and anthropogenic pressures. Therefore, this article uses the method of the strategic analysis of critical success factors (CSFs), applied to the energy sector. As the name implies, in this method, factors that determine energy strategies, relating to the economic, technological, political, social and ecological spheres, were identified. Poland served as a case study. Research was carried out by experts in the energy sector and people working with this sector in order to determine the significance of the most important CSFs related to the energy security strategy. This approach is based on an evolutionary approach to creating a security strategy. The proposed analysis is a new proposal for a sectorial anal... [more]

The application of intelligent equipment and technologies such as robots and unmanned vehicles is an important part of the construction of intelligent mines, and has become China’s national coal energy development strategy and the consensus of the coal industry. Environment perception and instant positioning is one of the key technologies destined to realize unmanned and autonomous navigation in underground coal mines, and simultaneous location and mapping (SLAM) is an effective method of deploying this key technology. The underground space of a coal mine is long and narrow, the environment is complex and changeable, the structure is complex and irregular, and the lighting is poor. This is a typical unstructured environment, which poses a great challenge to SLAM. This paper summarizes the current research status of underground coal mine map construction based on visual SLAM and Lidar SLAM, and analyzes the defects of the LeGO-LOAM algorithm, such as loopback detection errors or omissio... [more]

The successful and fast development and deployment of renewable energy and greenhouse gas reduction technologies is a continuing and structural challenge. The deployment of these technologies is slowed down and sometimes even stalled due to societal challenges like public resistance, lack of appropriate policy and regulations, unsolid business cases and uncertainty concerning the impact on the environment. In this paper we elaborate on societal aspects that influence technology development and deployment and introduce the societal embeddedness level (SEL) framework. Building upon the technology readiness level (TRL), the SEL framework enables the assessment of the current level of societal embeddedness of energy technologies in order to identify the societal aspects which need to be taken into account to accelerate deployment of energy technologies. The SEL framework takes into account four societal dimensions (impact on the environment, stakeholder involvement, policy and regulations,... [more]

Excess heat can make an important contribution to reduce greenhouse gas emissions in the heating and cooling sector. Due to the local character of heat, the local excess heat potential is decisive for using excess heat. However, the spatially distributed potential and the subdivision of the potential into different subsectors have not been sufficiently investigated in Germany. Here we analyse the excess heat potential in Germany according to different subsectors and spatially distributed to the municipal level. We use data of more than 115,000 records on exhaust gas and fuel input from over 11,000 industrial sites. We calculate the site-specific excess heat potential and check its plausibility using the fuel input of the respective industrial sites. Finally, we compare the excess heat potential with the residential heat demand at the municipal level. Our results show that the excess heat potential in Germany is about 36.6 TWh/a, and that in 148 municipalities, the annual excess heat po... [more]

The Jianghan Basin is a lacustrine basin in central China developing multiple salt bearing deposits in the Eocene with the success of shale oil exploration in the Qianjiang Formation. The lower member of the Xingouzui Formation in the Chentuokou Depression has become another exploration target. However, rapid changes in lithofacies and strong sedimentary heterogeneity limit the exploration progress. This study aimed to explore the sequence division, lithofacies characteristics, and sedimentary environment using sedimentological, X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyses. The sequence stratigraphic analysis indicates that the low member of the Xingouzui Formation is divided into two third-order sequences, namely SQ1 and SQ2, and four system tracts, including highstand systems tract (HST), lake expanding system tract (EST), early highstand system tract (EHST), and late highstand system tract (LHST). Moreover, a total of nine major lithofacies and five lithofacies asso... [more]

Solar-powered adsorption chillers are a particularly interesting alternative to energy-intensive conventional refrigeration systems. Integration of the adsorption chiller with solar collectors is a very promising concept since the increase in solar radiation coincides with the increased demand for cooling. Such a solution is very economical and environmentally friendly. It also fits in with current trends related to energy policy and sustainable development. The article presents the results of tests conducted for a two-bed adsorption chiller integrated with solar collectors. The tests were performed on selected days of the summer period (July and August) at the KEZO Research Centre PAS in Jablonna (Poland). Based on the results obtained, the performance parameters of the adsorption chiller were determined, and the problems associated with the integration of all components of the system were identified and discussed. The values of the determined Coefficient of Performance (COP) and cool... [more]

Many countries are pursuing energy security (ES) in their economies while implementing sustainable development goals (SDGs). Relevant policies may include: (1) access to efficient alternative and preferably renewable energy sources (RESs); and (2) reductions in conventionally obtained energy consumption. As the demand for energy is growing and alternative energy resources are expensive, new ways of financing projects to improve ES are of special interest, e.g., issuing green bonds. In such cases, the obtained funds are allocated to projects that can both improve ES and help to achieve SDGs. The aim of the study was to explore the dependences (in the sense of Granger causality) between the green bond (GB) market, different aspects of sustainable development, as measured by global indicators taken from a family of environmental NASDAQ OMX indices, and ES represented by crude oil prices. The methodology is based on the vector autoregression model. The findings reveal evidence of a short-t... [more]

The purpose of this work is to analyze the electron−nuclear interactions of the vanadyl-porphyrin (VP) complexes in oil asphaltenes. Asphaltenes from the Athabasca oil sands were studied by HYperfine Sublevel CORrelation Spectroscopy (HYSCORE) electron paramagnetic resonance (EPR). It makes it possible to resolve and interpret complex hyperfine spectra of intrinsic VP with strong and weak hyperfine interactions between the electron magnetic moment and various nuclear spins (1H, 14N, 51V). The main parameters of spin-Hamiltonian for the VP spin system are determined. The axially symmetric structure of the VP complexes is revealed, and the local nuclear environment of the paramagnetic center is investigated. The results can be used for the study of asphaltene electron−nuclear structure and asphaltene aggregates with the aim of elucidating asphaltenes’ transformation(s) under the influence of external treatment.

Among the alternatives for improving the thermal comfort conditions inside buildings are the thermally activated building systems (TABS). They are embedded in different building components to improve the indoor air temperature. In this work, a review and analysis of the state of the art of TABS was carried out to identify their potential to improve thermal comfort conditions and provide energy savings. Furthermore, this study presents the gaps identified in the literature so that researchers can develop future studies on TABS. The articles found were classified and analyzed in four sections, considering their implementation in roofs, walls, floors, and the whole envelope. In addition, aspects related to the configuration of the TABS and the fluid (speed, temperature, and mass flow rate) were analyzed. It was found that when TABS are implemented in roofs, walls, and floors, a reduction in the indoor temperature of a building of up to 14.4 °C can be obtained. Within the limitations of th... [more]

China’s high-quality economic development is hampered by market distortions, and promises to achieve peak carbon emissions by 2030, meaning that its economic growth faces serious environmental constraints. We use a heterogeneous stochastic frontier model to analyze the impact of factor market distortions and carbon dioxide emissions on economic growth, and to evaluate the Chinese energy industry’s chain technical efficiency under the influence of factor distortions and carbon dioxide emissions. Finally, the counterfactual measurement method is used to calculate the factor market distortions and loss of the energy industry chain technology efficiency as a result of carbon dioxide emissions. The main research results show that China’s energy technology efficiency is 0.959, and the average energy industry chain technical efficiency for each region from the highest to the lowest is east (0.961), center (0.957), northeast (0.955), and west (0.950). The space for efficiency improvement is 3.... [more]