Sustainability is a strategic approach to develop a more sustainable economy to support the environment and socio-economic development. Literature on sustainability has been concerned mainly with global warming and environmental degradation issues, whereas the Circular Economy (CE) concept has recently been suggested as an alternative solution to support market sustainability and deal with both environmental and socio-economic challenges. In order to tackle these challenges, countries must switch from linear economies that follow the “take-make-dispose” principle to circular and sustainable economies. This study applies a structural and conceptual literature review to elucidate the most decisive determinants in the formation of circular strategies, particularly in the context of the energy sector. This study examines obstacles that hinder CE adoption and formulates drivers and measures to overcome them. The strategic literature review shows that the circular approach is critical in ach... [more]

The oil & gas transport and storage (OGTS) engineering, from the upstream of gathering and processing in the oil & gas fields, to the midstream long-distance pipelines, and the downstream tanks and LNG terminals, while using supply chains to connect each part, is exploring its way to reduce energy consumption and carbon footprints. This work provides an overview of current methods and technological improvements and the latest trends in OGTS to show how this industry strives to achieve sustainable development goals. The critical analyses are from increasing flexibility, energy saving, emission reduction, and changing energy structure. The study shows the need to focus on improving energy efficiency further, reducing energy/water/material consumption and emissions, and maintaining safety for such an extensive oil & gas network.

To understand hydrocarbon migration in terms of the mechanisms, accumulations and exploration targets, it is essential to correctly identify and characterize the carrier systems that control fluid-migration history and oil/gas reservoir formation. The Yinggehai Basin in China is an important area for natural gas exploration and production. However, due to the argillaceous sand sedimentary environment and the absence of faults from the Neogene thermal subsidence period, traditional migration pathways are absent in the Yinggehai Basin, posing significant challenges to target evaluation in this area. Exploration shows that most of the existing gas reservoirs are associated with vertical migration. In this work, coherence cube and curvature seismic techniques are used in the central diapir zone of the Yinggehai Basin to identify diapir-associated fractures and regional stress. Together with geological analysis, two categories of carrier system are discussed in detail to explain the complex... [more]

The idea of a circular economy (CE) has gained ground over the past ten years as a means of addressing sustainable development and getting around the limitations of the current and linear dominant production and consumption patterns. The primary goal of a CE is to encourage the adoption of closing-the-loop production methods to improve resource use efficiency, modify chemical processes, and increase product and material lifespan. According to the 2030 Agenda for Sustainable Development, which focuses on 17 Sustainable Development Goals, 14 of which call for the appropriate application of green chemistry (GC) concepts and patterns, the role that chemistry may play in the shift toward more sustainable models is critical. By serving as the foundation for novel products made from renewable feedstocks and designed to be reused, recycled, or recovered with the associated minimum energy requirements, green and sustainable chemistry could be the key to unlocking the economic potential of the C... [more]

Long-distance oil and gas pipelines buried in permafrost areas will inevitably encounter typical geological disasters, such as frost heave and thaw settlement and sliding, which easily cause pipeline displacement, bending, or deformation. When there are certain defects in the pipeline, additional complex, external stress will further lead to the failure of the pipeline or weld and can even lead to serious accidents such as pipeline leakage, pipe burst, or fracture. This paper introduces in detail the typical defects and risks of buried pipelines in permafrost areas and summarizes the in-line inspection technologies, off-line inspection technologies, and integrated monitoring systems for pipelines in the pipeline industry. Regarding pipelines in permafrost areas, in-line inspection methods may be employed. These include magnetic flux leakage, electromagnetic eddy current, ultrasonic, IMU, and electromagnetic acoustic transducer inspections. Off-line inspection is also one of the importa... [more]

A detailed review was conducted to explore waste cooking oil (WCO) as feedstock for biodiesel. The manuscript highlights the impact on health while using used cooking oil and the scope for revenue generation from WCO. Up to a 20% blend with diesel results in less pollutants, and it does not demand more modifications to the engine. Also, this reduces the country’s import bill. Furthermore, it suggests the scope for alternate sustainable income among rural farmers through a circular economy. Various collection strategies are discussed, a SWOC (strength, weakness, opportunity, and challenges) analysis is presented to aid in understanding different countries’ policies regarding the collection of WCO, and a more suitable method for conversion is pronounced. A techno-economic analysis is presented to explore the viability of producing 1 litre of biodiesel. The cost of 1 litre of WCO-based biodiesel is compared with costs Iran and Pakistan, and it is noticed that the difference among them is... [more]

The high-efficiency operation of photovoltaic and wind systems is affected by many factors and parameters that should be continuously monitored. Since most of the variable factors are related to weather conditions, they are difficult to predict. Therefore, in order to optimize the operating point of a photovoltaic or wind power plant, it is necessary to observe changes in the subject area. The operation of photovoltaic and wind power plants can complement each other. The results recorded at the hybrid power plant of the Faculty of Electrical Engineering of Bialystok University of Technology are useful for a comprehensive analysis of the power plant operation and the ways to optimize it. This paper presents the influence of environmental factors on the operation of a hybrid photo-voltaic−wind power plant located in the city of Bialystok, Poland. The aim of the study was to present the variable factors on the optimal adjustment of the location of the power plant elements at the stage of... [more]

This work aims to provide an energy and critical analysis of the new “ecological scenario” that sees the world shift the transport sector from the classic fossil-fueled traction towards a purely electric traction. Is it a transition to a cleaner and more environmentally friendly world? This is the central question we need to answer. In this context of forced electrification of passenger vehicles, the authors estimated the electricity surplus needed in Italy to face this transition with a projection up to 2050, considering the electricity demand of purely electric vehicles and for the production of green hydrogen for the fuel supply of fuel cell vehicles. Throughout this investigation, the authors discovered that, in 2050, the surplus of electricity to be produced compared to the current production in Italy (year 2021) is equal to +27.6% (1). This value increases if two limit scenarios are considered: it becomes +40.0% within a limit scenario in which the entire private car fleet is mad... [more]

Being one of the major energy consumers, cooking is a necessary part of daily life. Non renewable cooking fuel sources, such as wood or cow dung cause hazardous pollution and a poor ecosystem worldwide. Over the past few decades, solar-powered cooking has undergone numerous improvements. Solar cooking has been predominantly used as a substitute for reducing oil and gas dependence, increasing environmental sustainability, and reducing global warming threats. This paper talks about the recent development of the box-type solar cooker. The paper discusses the principles and classifications of various parameters that affect the performance, energy, and exergy related to the solar cooking system. In line with the sustainable development goals of the UN agenda 2030 and especially the heed to the accomplishment of SDG 7 and SDG 13, various economic factors, such as the payback period (PP), net present value (NPV), benefit−cost (B−C) ratios, internal rate of return (IRR), levelized cost of heat... [more]

The increasing demand for food, the lack of natural resources and arable land, and the recent restrictions on energy consumption require an immediate solution in terms of agricultural activities. This paper’s objective was to review hydroponics (a new soilless cultivation technology) and compare it with conventional agriculture (soil cultivation) regarding its environmental impact and water and energy consumption. The soil loss, the crop/soil contamination, and the greenhouse gas emissions were the criteria for the environmental comparison of conventional agriculture and hydroponics. As for resource consumption, the water consumption rates (L/kg), energy consumption rates (kWh), and energy required (kW) were the criteria for comparing conventional agriculture with hydroponics. Tomato and cannabis cultivation were used as case studies in this review. The review results showed that the advantages of hydroponics over conventional cultivation include zero-soil cultivation, land-use efficie... [more]

As part of the United Nations’ (UN) Sustainable Development Goal 7 (SDG7), SDG target 7.1 recognizes universal electrification and the provision of clean cooking fuel as two fundamental challenges for global society. Faltering progress toward SDG target 7.1 calls for innovative technologies to stimulate advancements. Hydrogen has been proposed as a versatile energy carrier to be applied in both pillars of SDG target 7.1: electrification and clean cooking. This paper conducts a semi-systematic literature review to provide the status quo of research on the application of hydrogen in the rationale of SDG 7.1, covering the technical integration pathways, as well as the key economic, environmental, and social aspects of its use. We identify decisive factors for the future development of hydrogen use in the rationale of SDG target 7.1 and, by complementing our analysis with insights from the related literature, propose future avenues of research. The literature on electrification proposes th... [more]

Demand response modeling in smart grids plays a significant role in analyzing and shaping the load profiles of consumers. This approach is used in order to increase the efficiency of the system and improve the performance of energy management. The use of demand response analysis in determining the load profile enhances the scheduling approach to the user profiles in the residential sector. In accordance with the behavioral pattern of the user’s profile, incentive-based demand response programs can be initiated in the residential sector. In modeling the behavioral pattern of the user’s profile, the machine learning approach is used to analyze the profile patterns. The incentive-based demand response is demonstrated in order to show the importance of maintaining the privacy of residential users, during interactions between demand- and load-profile patterns. In this work, real-time demand response modeling for residential consumers, with incentive schemes, are analyzed. The incentive sche... [more]

When burning fuel in grate furnaces, supplying the right amount of air to them is as important as the method of air supply. In a furnace with a fixed grate, the supply method of primary air is determined by the distribution of the supplied air stream over time, and in a furnace with a movable grate, the said method involves the distribution of the stream along the active length of the grate. The need to account for air distribution is attributable to complex processes that occur during the combustion process. The paper describes experimental studies aimed at determining the influence of the distribution of the supplied primary air on the emission of CO2, CO, SO2, NOx, and on the content of combustible parts in the slag. In all cases, the total amount of primary air supplied to the process as well as other process control parameters was identical, and only the distribution of primary air was different. The paper proposes the use of a generalized function to describe the distribution of... [more]

Distributed energy resources aggregators (DERAs) are permitted to participate in regional wholesale markets in many counties. At present, new market players such as aggregators participate in China’s power market transactions. However, studies related to market trading strategy have mostly focused on centralized wind power and PV generation units. Few studies have been conducted on the decision-making strategies for DERAs in China’s power market. This paper proposes an auxiliary decision-making model for distributed energy systems to participate in the day-ahead market with more reasonable trading strategies. Firstly, the Gaussian mixture model (GMM) is used to deal with the uncertainties of wind power and photovoltaic (PV) output in the distributed energy system. Secondly, the information gap decision theory (IGDT) is used to deal with the uncertainty of price fluctuations in the spot electricity market. Thirdly, according to the different risk preferences of the DERAs facing market p... [more]

The rising cost and demand for energy have prompted the need to devise innovative methods for energy monitoring, control, and conservation. In addition, statistics show that 20% of energy losses are due to the mismanagement of energy. Therefore, the utilization of energy management can make a substantial contribution to reducing the unnecessary usage of energy consumption. In line with that, the intelligent control and optimization of energy management systems integrated with renewable energy resources and energy storage systems are required to increase building energy efficiency while considering the reduction in the cost of energy bills, dependability of the grid, and mitigating carbon emissions. Even though a variety of optimization and control tactics are being utilized to reduce energy consumption in buildings nowadays, several issues remain unsolved. Therefore, this paper presents a critical review of energy management in commercial buildings and a comparative discussion to impro... [more]

We have been observing large fluctuations and price increases in electricity markets in recent years. The COVID-19 pandemic, rising energy costs, political instability and increasing demand for electricity have been the factors intensifying the problems. This causes uncertainty related to maintaining energy security. Energy security is an element of the national security system. In this context, the question arises whether Polish energy companies are able to adapt to the growing demand for electricity while meeting the growing environmental requirements. Moreover, it remains to be seen how the current energy crisis will affect the financial condition of energy companies in Poland and whether companies from the energy sector will benefit from this crisis. Another issue is the impact of the current crisis on the sense of energy security of consumers. There are many factors affecting energy security. This study focuses on economic and financial factors. The article aims to assess the ener... [more]

There is a significant push to reduce carbon dioxide (CO2) emissions and develop low-cost fuels from renewable sources to replace fossil fuels in applications such as energy production. As a result, CO2 conversion has gained widespread attention as it can reduce the accumulation of CO2 in the atmosphere and produce fuels and valuable industrial chemicals, including carbon monoxide, alcohols, and hydrocarbons. At the same time, finding ways to store energy in batteries or energy carriers such as hydrogen (H2) is essential. Water electrolysis is a powerful technology for producing high-purity H2, with negligible emission of greenhouse gases, and compatibility with renewable energy sources. Additionally, the electrolysis of organic compounds, such as lignin, is a promising method for localised H2 production, as it requires lower cell voltages than conventional water electrolysis. Industrial wastewater can be employed in those organic electrolysis systems due to their high organic content,... [more]

We present the design of an original secondary cavity for use in Small-Scale Fresnel Reflectors in photovoltaic applications. The cavity is similar to the classical V-trough, but the primary reflector system is configured so that there are two focal points on the aperture. The rays coming from each side of the primary system reach the opposite side of the cavity, producing a non-symmetrical distribution of the irradiance. This modifies the acceptance half-angle and allows us to break the maximum limit for the concentration ratio of ideal symmetric concentrators. Our study is analytic, and we provide formulas for any number of reflections. Numerical simulations with a ray-tracing program based on MATLAB are included. We provide a comparison of optical concentration ratio, height and cost parameter between our system and two classical designs with a single focal point: the V-trough and the Compound Parabolic concentrators. This way, we verify that our design yields better concentration r... [more]

Professionals in the building design and operation fields typically look at standards and guidelines as a reliable source of information and guidance with regard to procedural, contractual, and legal scope and requirements that are relevant to accountability issues and compliance necessities. Specifically, indoor environmental quality (IEQ) standards support professionals to bring about comfortable thermal, air quality, acoustic, or visual conditions in buildings. In this context, it appears essential to regularly examine the IEQ standards’ applicability and scientific validity. The present contribution focuses on common thermal comfort standards in view of the reasoning and includes evidence behind their recommendations and requirements. Thereby, several international and national thermal comfort standards are examined via a structured matrix to assess basic parameters, design and performance variables targeted by the standards, suggested value ranges, and both general and specific ev... [more]

Bioenergy represents a viable renewable alternative for the many off-grid remote communities in Northern Canada that rely on diesel-based energy infrastructure. Despite the abundance of forest-based biomass, bioenergy for heat and power in Canada is used primarily in industrial contexts. Community-scale bioenergy, although growing, has been limited. Supply chain challenges, institutional and policy arrangements, and community perspectives indicate a need to better understand the ‘business ecosystem’ for bioenergy in Canada. The ecosystem includes technologies, community contexts, suppliers, developers, and policy makers. In this study, we explore the bioenergy business ecosystem challenges and perspectives from supply-side stakeholders. Interviews were conducted with representatives from the government, industry, and community—all working in bioenergy. The results indicate the following challenges facing the bioenergy ecosystem, with respect to community energy security: lack of cross-... [more]

In this study, the authors assessed the road emissions of several passenger cars using specialised instrumentation, of the PEMS type, to measure particle number emissions in real traffic conditions. The tests were performed on a RDE test route developed and compliant with EU guidelines. The results of the tests were discussed in terms of the direct (created in the internal combustion engine) emission of particulate matter in various road conditions. Additionally, an index was determined that characterizes the number of particles according to their diameter in relation to the content of particles in the air. A characteristic of combustion engines (gasoline, diesel) is that during a cold start of the engine, the concentration of the number of particles with diameters around 100 nm increases more than 200 times (for hybrids—300 times). On this basis, it can be concluded that particle emissions with diameters smaller than 23 nm are significant in motor vehicles powered by combustion engine... [more]

The development of biogas upgrading technologies is now an essential issue in recovering fuel-grade methane. Nowadays, trends in biogas upgrading include investigations of low-cost and renewable materials as sorbents for biogas enrichment to produce biomethane. Therefore, in this work, wastewater anaerobic sludge stabilized with calcium oxide was used as the bio-waste sorbent to capture carbon dioxide from biogas, employing a fixed bed column. The biogas flow rate was the parameter considered for examining the breakthrough responses. It was observed that breakthrough time decreases with increasing biogas inflow rate from 570 ± 10 min at 5 mL/min to 120 ± 12 min at 35 mL/min. The maximum sorption capacity of 127.22 ± 1.5 mg CO2/g TS of sorbent was estimated at 15 mL/min. Biomethane concentration in biogas increased from 56.5 ± 1.7 v% in the raw biogas to 98.9 ± 0.2 v% with simultaneous low carbon dioxide content of 0.44 ± 0.2 v%. A strong positive correlation (R2 = 0.9919) between the s... [more]

Today, science faces the problem of rethinking the incentives for the transition to sustainable development, including the expansion of the “green” economy, renewable energy and recycling of materials, in keeping with the fact that not all the goals set by global organizations in this area [...]

The development of environmentally friendly technologies, including additive technologies, contributes to the formation of sustainable production in city multifloor manufacturing clusters (CMFMCs). This paper discusses an approach to the implementation of energy-intensive technological processes in such clusters using examples of the manufacturing of ceramic and metal−ceramic products. The manufacturing of ceramic and metal−ceramic products in high-temperature furnaces is associated with an increased electricity consumption. The use of modern ceramic micro- and nanopowders makes it possible to switch to more energy-saving technologies by reducing the sintering temperature and shortening the technological cycle. This requires the use of additional activating and inhibiting additives in the initial powder mixtures to obtain products with the necessary physical and mechanical properties. The purpose of this paper is to present a model and indicators to assess the energy efficiency of the... [more]

The G-7 economies comprise a few of the global, mainly economically developed countries. On the other hand, in conjunction with these high economic development performances, the ecological behaviors in G-7 anions have concurrently provoked to elevate deep apprehensions among the stakeholders. Therefore, the present research aims to empirically investigate the environmental influences of nuclear energy, industrialization, fossil fuel energy, and foreign direct investment (FDI) in the G-7 nations between 1991 and 2018. After checking the cross-sectional dependency, this study employed the first-generation ((full modified ordinary least square (FMOLS), dynamic ordinary least square (DOLS)) and second-generation (Driscoll and Kraay (D-K), feasible generalized least square (FGLS)) approaches for robust and reliable findings. The findings explore that nuclear energy production is ineffective in curbing the figure of ecological footprints in the long-run. Moreover, the industrialization proce... [more]