Urban wastewater could be converted into energy if microbial electrochemical technologies (METs) like microbial dual-chamber electrolysis cells (MDEC) or microbial fuel cells (MFC) are applied as a treatment method. Mathematical modelling of MFC and MDEC for wastewater treatment and energy recovery has been developed in this study. The Radaue method has been used to solve ordinary differential equations (ODEs), and the model outputs were successfully validated with previous experimental and modelling data. A case study in Montreal, Canada, has also been considered for testing the application of METs on an urban scale with a total daily wastewater flow of 75,000 L/day. The results show that from 1 m3 of wastewater, MDEC and MFC can generate 0.077 kg H2 and 0.033 kWh, respectively.

Supercritical carbon dioxide (SCO2) is widely used in many fields of energy and power engineering, such as nuclear reactors, solar thermal power generation systems, and refrigeration systems. In practical applications, SCO2 undergoes a cooling process significantly when it is cooled near the pseudo−critical point. Because of the drastic variations in thermo−physical properties, the heat transfer characteristics fluctuate, affecting the heat exchange and overall cycle performance. This paper summarizes extensive experiments and numerical simulations on the cooling process of SCO2 in various application scenarios. The effects of various working conditions, such as mass flow, working pressure, pipe diameter, flow direction, and channel shapes, are reviewed. The applicability and computational results using different numerical methods under different working conditions are also summarized. Furthermore, empirical correlations obtained in experiments at different conditions are included. The... [more]

In recent years, with the rapid development of distributed photovoltaic systems (DPVS), the shortage of data monitoring devices and the difficulty of comprehensive coverage of measurement equipment has become more significant, bringing great challenges to the efficient management and maintenance of DPVS. Virtual collection is a new DPVS data collection scheme with cost-effectiveness and computational efficiency that meets the needs of distributed energy management but lacks attention and research. To fill the gap in the current research field, this paper provides a comprehensive and systematic review of DPVS virtual collection. We provide a detailed introduction to the process of DPVS virtual collection and identify the challenges faced by virtual collection through problem analogy. Furthermore, in response to the above challenges, this paper summarizes the main methods applicable to virtual collection, including similarity analysis, reference station selection, and PV data inference.... [more]

Battery degradation is a main concern for electric vehicle (EV) users, and a reliable capacity estimation is of major importance. Every EV battery management system (BMS) provides a variety of information, including measured current and voltage, and estimated capacity of the battery. However, these estimations are not transparent and are manufacturer-specific, although measurement accuracy is unknown. This article uses extensive measurements from six diverse EVs to compare and assess capacity estimation with three different methods: (1) reading capacity estimation from the BMS through the central area network (CAN)-bus, (2) using an empirical capacity estimation (ECE) method with external current measurements, and (3) using the same method with measurements coming from the BMS. We show that the use of BMS current measurements provides consistent capacity estimation (a difference of approximately 1%) and can circumvent the need for costly experimental equipment and DC chargers. This dat... [more]

With the rapid expansion of new energy in China, the large-scale grid connection of new energy is increasing, and the operating safety of the new energy power system is being put to the test. The static security and stability region (SSSR) with hyper-plane expression is an effective instrument for situational awareness and the stability-constrained operation of power systems. This paper proposes a hybrid improved particle swarm optimization (IPSO) and recursive least square (RLS) approach for rapidly approximating the SSSR boundary. Initially, the operating point data in the high-dimensional nodal injection space is examined using the IPSO algorithm to find the key generators, equivalent search space, and crucial points, which have a relatively large impact on static stability. The RLS method is ultimately utilized to fit the SSSR border that best suits the crucial spots. Consequently, the adopted algorithm technique was used to rapidly approximate the SSSR border in power injection sp... [more]

The bidirectional dc-dc converter is a critical component for extending the use of renewable energy and improving the efficiency of high-power electronic systems. This paper presents the analysis of the stray inductance of a commutation loop and the commutation behavior of IGBT devices in a flying capacitor three-level bidirectional DC-DC converter (FC-3L-BDC) phase-leg power electronic building block (PEBB). An FC-3L-BDC phase-leg PEBB was designed as an example, which can be used to build 400 kW to MW-grade light rail train chargers, battery energy storage interface converters, or metro regenerative braking energy recovery converters with a single PEBB or several PEBBs interleaved parallel. In order to optimize the stray inductance of commutation paths and realize snubberless operation, a five-layer laminated bus bar was carefully designed, and the stray inductance of the bus bar was extracted by three-dimensional finite element analysis simulation. To obtain higher accuracy, the str... [more]

The key goal of this research was to figure out the short and long run relationship between environmental degradation caused by carbon dioxide (CO2) emissions and energy consumption, the level of GDP economic growth, and urbanization in the Visegrad Region countries (V4). The study used data from the years 1996−2020. In the methodological area, ARDL bound test, and ARDL and ECM models were used to determine the directions and strength of interdependence. The results show that in the case of some V4 countries (Poland, Slovakia, and Hungary), changes in the urbanization rate affect CO2 emissions. Moreover, it was confirmed that the phenomenon of urbanization influences the enhanced energy consumption in the studied countries. In the case of individual countries, these relationships were varied, both unidirectional and bidirectional. Their nature was also varied—there were both long and short-term relationships. These findings suggest that the V4 countries should increase renewable and ec... [more]

In this paper, an integrated system based on low-concentrated photovoltaic/thermal (LCPV/T) technology and efficient vacuum membrane distillation (VMD) seawater desalination utilizing the energy of solar is established. Through a theoretical analysis and a series of experiments, this paper explores the temperature change of a single VMD process, and the variation trend of single-day membrane flux with solar irradiation and temperature parameters. In addition, the changes in solar irradiation, temperatures of the integrated system, membrane flux, and thermoelectric properties in different seasons are also analyzed. A mathematical model was established to calculate the relationship between membrane flux and temperature difference. The experimental results show that the membrane flux of VMD is 2.73 L/(m2·h); the simulated seawater can achieve a desalination rate of 99.9%. After economic analysis, the operating incomes of the system under sunny weather conditions in different seasons were... [more]

A cooling tower is an important guarantee for the proper operation of a solar system. To ensure proper operation of the system and to maintain high-efficiency points, the cooling tower must operate year-round. However, freezing is a common problem that degrades the performance of cooling towers in winter. For example, the air inlet forms hanging ice, which clogs the air path, and the coil in closed cooling towers freezes and cracks, leading to water leakage in the internal circulation. This has become an intractable problem that affects the safety and performance of cooling systems in winter. To address this problem, three methods of freeze protection for cooling towers are studied: (a) the dry and wet mixing operation method—the method of selecting heat exchangers under dry operation at different environments and inlet water temperatures is presented. The numerical experiment shows that the dry and wet mixing operation method can effectively avoid ice hanging on the air inlet. (b) The... [more]

Marine renewable sources can make a significant contribution to the development of electrical energy generation and can increase the power supply reliability of mineral complexes. The development of alternative energy sources is happening at a fast pace, and this is due to the improvement of technologies that allow for generating more energy and operating in more extreme conditions, with almost no negative effect on the environment. However, currently, renewable sources are not able to meet all the energy requirements of the platforms. Hence, a key point is to gradually introduce and develop new technologies. This article explores the advantages of combining power generation by wave converters and offshore wind turbines. It investigates the possibilities of improving the combined systems’ reliabilities through justification of their mutual topology and accounting for the shadow effect from the wave installations.

Today, one of the main priorities in Europe is to introduce measures to increase environmental protection. Therefore, SMEs operating in the branch related to renewable energy are essential for several EU priorities. SMEs can also be vulnerable, especially during times of crisis, which could negatively affect renewable energy development. Therefore, this paper aims to evaluate and analyze the financial security management of renewable energy SMEs during the COVID-19 pandemic. The research is conducted on SMEs operating in the renewable energy sector in Poland. The research periods are 2019 (before the COVID-19 crisis) and 2020 (during the crisis). By analyzing different financial performance ratios, we found that SMEs operating in the energy sector have been able to stabilize and maintain their current economic position compared to the past. The results of this study indicate that the receivables collection period, cash conversion cycle, and operating cycle could have been insignificant... [more]

The objective of this review paper is to provide an overview of the current state-of-the-art in solar road deployment, including the availability of anti-reflection and anti-soiling coating materials for photovoltaic (PV) technology. Solar roads are built using embedded PV panels that convert sunlight into electricity, which can be stored for later use. Prototypes of solar roads have been tested on various continents, but the lack of suitable PV materials has limited their effectiveness compared to conventional PV systems. By analyzing the existing literature on solar roads and PV materials, including anti-reflection and anti-soiling coatings, we aim to identify gaps in knowledge and propose an action plan to improve the resiliency, durability, and reliability of PV panels in solar road applications. This will enable the deployment of solar roads as a clean, renewable energy source.

The publication presents a proposal of methodology for the evaluation of electric vehicle energy storage, based on examples of three types of batteries. Energy stores are evaluated in different categories such as cost, reliability, total range, energy density, battery life, weight, dependency on ambient temperature, and requirements of battery conditioning system. The performance of the battery systems were analyzed on exemplary 4 × 4 vehicle with 4 independent drives systems composed of inverters and synchronous in-wheel motors. The studies showed that the best results were obtained for energy storage built on LFP prismatic batteries, and the lowest ranking was given to energy storage built on cylindrical NMC batteries. The studies present the method of aggregation of optimization criteria as a valuable methodology for assessing design requirements and the risk of traction batteries in electric vehicles.

Natural gas hydrate is easy to decompose and leak due to the changes in temperature and pressure during drilling, which causes safety accidents. Early monitoring of wellhead overflow is a practical and effective measure to prevent overflow blowouts and other accidents. Herein, a wellhead methane monitoring system for the open-circuit drilling of marine natural gas was designed. The system consisted of an overwater acoustic reception part and an underwater self-contained methane monitoring part, matching the construction environment of marine natural gas hydrate exploitation. Compared with the existing gas logging technology (measurement while drilling), the monitoring and early warning of wellhead methane content were realized at all stages of drilling, casing running, cementing, completion and fracturing in the process of natural gas hydrate exploitation. System communication and data acquisition tests were completed at different water depths through sea trials, which verified the eff... [more]

Renewable energy development is growing fast and is expected to expand in the next decades in West Africa as a contribution to addressing the power demand and climate change mitigation. However, the future impacts of climate change on solar PV and the wind energy potential in the region are still unclear. This study investigates the expected future impacts of climate change on solar PV and wind energy potential over West Africa using an ensemble of three regional climate models (RCMs). Each RCM is driven by three global climate models (GCMs) from the new coordinated high-resolution output for regional evaluations (CORDEX-CORE) under the RCP8.5 scenario. Two projection periods were used: the near future (2021−2050) and the far future (2071−2100). For the model evaluation, reanalysis data from ERA5 and satellite-based climate data (SARAH-2) were used. The models and their ensemble mean (hereafter Mean) show acceptable performance for the simulations of the solar PV potential, the wind po... [more]

The increasingly widespread use of electric vehicles requires proper planning of the charging infrastructure. In addition to the correct identification of the optimal positions, this concerns the accurate sizing of the charging station with respect to energy needs and the management of power flows. In particular, if we consider the presence of a renewable energy source and a storage system, we can identify strategies to maximize the use of renewable energy, minimizing the purchase costs from the grid. This study uses real charging data for some public stations, which include “normal” chargers (3 kW and 7 kW) and “quick” ones (43 kW and 55 kW), for the optimal sizing of a photovoltaic system with stationary storage. Battery degradation due to use is included in the evaluation of the overall running costs of the station. In this study, two different cost models for battery degradation and their influence on energy flow management are compared, along with their impact on battery life.

The thermal regulation of a silicon photovoltaic (PV) solar system is essential as the module surface temperature beyond 25 °C deteriorates its Power Conversion Efficiency (PCE). The intensity of solar radiation seems to have a crucial impact on the PCE of a PV solar system. The present study aims to assess the effect of solar radiation variations on the PCEs of PV modules integrated with and without passive cooling systems. The used passive cooling systems are (a) multi-pipe copper frame filled with Phase Change Material (PCM) and (b) multi-pipe copper frame filled with ZnO-doped PCM. The tests were conducted at the University of Jeddah in the month of March at various local times. The results show that the ambient and module surface temperatures are directly dominated by solar radiations. The conventional PV solar system presents a higher module surface temperature as compared to that of a PV system integrated with ZnO/PCM. The enhanced module surface temperature decreases the open c... [more]

The subject of the article is issues related to innovative indices for power system stabilizers (PSSs). These new indices will be able to quickly show which PSS (among many other PSSs) is not working properly and that advanced optimization and simulation methods should be used to improve the PSS settings. The authors note the fact that the acceptance requirements for PSSs are different in various power systems. Moreover, the authors pay attention to the fact that transmission system operators (TSOs) often have different PSS requirements (tests) even though they work in the same large power system. The article reviews the requirements for the PSSs used by TSOs of various power systems. The need to supplement the required tests with new qualitative indices is demonstrated. In the paper, new performance indices are proposed to improve the evaluation of the PSS and to check the desired performance of the stabilizer. These indices are derived from the active power frequency response charact... [more]

The gasification kinetics of pellets obtained from organic solid wastes (OWS) and raw materials were studied using the Coats−Redfern and DAEM methods. The different methods were comparatively analyzed for mutual verification, and the similar activation energies obtained by each method affirmed the accuracy of the kinetics calculation. Overall, the activation energies of the char gasification stage ranged from 200 to 265 kJ mol−1, higher than those of the devolatilization stage, which ranged from 130 to 200 kJ mol−1 for all pellets and raw materials. During the devolatilization stage, the activation energies of the pellets were invariably higher than those of their corresponding raw materials, which was the opposite for the char gasification stage. A detailed comparison between the calculation results from the Coats−Redfern and DAEM methods confirmed that the devolatilization stage is controlled by one-dimensional diffusion, and the gasification stage is controlled by two-dimensional or... [more]

Decreasing production and rising prices of cars, especially those with electric drive, lead to longer use of cars with internal combustion engines. It can be assumed that in the future, more and more cars powered by such engines with high mileage and therefore high wear will be used. Engine wear leads to reduced efficiency and increased emissions. This paper analyzes the impact of wear of the piston−rings−cylinder system components on energy losses associated with gas leakage from the combustion chamber and friction of the rings against the cylinder liner in a car spark-ignition engine. A ring pack model was used for the analyses. The input data for the simulation were gained in measurements made on the engine test stand and measurements of the wear of the engine components used in the car. The energy losses associated with blow-by in an unworn engine ranged from 1.5% of the indicated work at high load to almost 5% at low load. In the engine after 300,000 km, these losses increased to... [more]

The article considers the main tendencies of development of alternative liquid fuels used in aviation, land transport, and for the needs of power generation sector. An overview of the main constraints to the development of alternative fuel technologies in these technical areas was carried out. The main groups of the most promising components and fuel compositions capable of effectively replacing conventional liquid fuels have been generalized. The basic criteria for evaluating alternative fuels are formulated. Environmental indicators of fuel combustion are of paramount importance for aviation. Rheological characteristics, calorific value, and environmental friendliness are critical for land transport engines. The effectiveness of alternative fuels for the power generation sector needs to be assessed in terms of such factors as economic, environmental, rheological, and energy to find an optimal balanced formulation. The list of potential components of alternative liquid fuels is extrem... [more]

The aim of this work is to analyse the dependence of carbon dioxide (CO2) emissions on total energy consumption, the energy produced from renewable sources, the energy produced in nuclear power plants and the gross domestic product (GDP) in 22 European countries, over the period 1992−2019. The fully modified ordinary least squares model (FMOLS) and dynamic OLS (DOLS) were used to estimate the long-term cointegration relationship between the variables. First differenced (FD) general moments methods (GMM) were used in the estimation of short-run relationship dynamics. The results suggest that energy produced from renewable sources causes a reduction in CO2 emissions per capita. On the other hand, total energy consumption increases CO2 emissions in the long run. Although the mitigation effect of nuclear power was not found to be significant across the entire block of countries studied, a closer look at countries utilising nuclear energy reveals that nuclear energy positively affects the r... [more]

Green ammonia has potential as a zero-emissions energy vector in applications such as energy storage, transmission and distribution, and zero-emissions transportation. Renewable energy such as offshore wind energy has been proposed to power its production. This paper designed and analyzed an on-land small-scale power-to-ammonia (P2A) production system with a target nominal output of 15 tonnes of ammonia per day, which will use an 8 MW offshore turbine system off the coast of Nova Scotia, Canada as the main power source. The P2A system consists of a reverse osmosis system, a proton exchange membrane (PEM) electrolyser, a hydrogen storage tank, a nitrogen generator, a set of compressors and heat exchangers, an autothermal Haber-Bosch reactor, and an ammonia storage tank. The system uses an electrical grid as a back-up for when the wind energy is insufficient as the process assumes a steady state. Two scenarios were analyzed with Scenario 1 producing a steady state of 15 tonnes of ammonia... [more]

To improve the energy density of lithium-ion battery packs, lithium-ion batteries are gradually advancing towards large-size structures, which has become one of the dominant development trends in the battery industry. With large-size blade lithium-ion batteries as the research object, this paper develops a high-precision electro-thermal coupling model based on the relevant parameters obtained through basic performance experiments, explores the mechanism of battery inhomogeneity from a simulation perspective, and further proposes a design management method. First of all, the optimal intervals of capacity and temperature, as well as the characteristics of the inhomogeneity distribution for large-size cells, are determined by essential performance and inhomogeneity tests; subsequently, the electrochemical and thermal characteristics of the large-size battery are described precisely through a 3D thermoelectric coupling mechanism model, and the inhomogeneity of the temperature distribution... [more]

Quality in healthcare service is essential in giving rural dwellers a good standard of living. It has been established that many rural locations in Sub-Saharan Africa away from the grid connection have difficulty accessing electricity. The inaccessibility of reliable energy and essential medical equipment was the leading barrier to improved healthcare delivery in these rural locations. The deficiency of basic medical equipment to power essential services due to limited or unreliable electricity access has reduced rural healthcare workers’ care capabilities, resulting in higher mortality rates. This paper, therefore, reviews the existing energy solutions for rural healthcare facilities, thereby analysing different approaches and the geographical energy mix and ascertaining the effectiveness of various techniques and energy mix as solutions to effective healthcare delivery in healthcare centres. Hybrid Renewable Energy Sources (HRES) microsystems, like microgrids incorporated with solar... [more]