Doping heteroatoms such as nitrogen (N) and boron (B) into the framework of carbon materials is one of the most efficient methods to improve the electrical performance of carbon-based electrodes. In this study, N-doped carbon has been facilely synthesized using a ZIF-8/polydopamine precursor. The polyhedral structure of ZIF-8 and the effective surface-coating capability of dopamine enabled the formation of N-doped carbon with a hollow structure. The ZIF-8 polyhedron served as a sacrificial template for hollow structures, and dopamine participated as a donor of the nitrogen element. When compared to ZIF-8-derived carbon, the HSNC electrode showed an improved reversible capacity of approximately 1398 mAh·g−1 after 100 cycles, with excellent cycling retention at a voltage range of 0.01 to 3.0 V using a current density of 0.1 A·g−1.

This paper introduces a novel design of an electric vehicle (EV) fast charging station, consisting of a battery energy storage system (BESS) with reconfigurable cell topology. The BESS comprises two battery strings that decouple the power flow between EV and grid, to enable charging powers above the grid capacity. The reconfigurable design is achieved by equipping the battery cells with semiconductor switches and serves two main purposes. First, it aims at solving cell unbalance issues to increase safety, reliability, and lifetime of the battery. Second, it enables the BESS to actively control the EV charging process by changing its cell configuration in a real-time fashion, making a DC-DC converter redundant. The paper presents a modelling approach that captures the reconfigurable design including the controlling algorithm used for cell engagement. The simulation results show that the BESS is able to fulfil the EV request with sufficient accuracy for most of the fast charging process.... [more]

The Atacama Desert receives the highest levels of solar irradiance in the world with an annual average of 2500 kWh/m2 for the global horizontal irradiance and 3500 kWh/m2 for the direct normal irradiance. One of the challenges is the large portion of ultraviolet light. This part of the spectrum be detrimental for the encapsulant materials, reducing their lifetime. To develop a module adapted to the Atacama Desert conditions, it is imperative to have standardized information from first-hand about the typical faults experienced by photovoltaic modules operating in the desert. This work reports on the design and implementation of the Inspection Data Collection Tool to evaluate crystalline silicon-based moules operating in desert climates. The tool brings together novel features of compatibility with current standards, efficient mobile-type instrumentation (equipment and tools), clear procedures/protocols for non-expert users and low development costs. A total of 95 modules were inspected... [more]

An essential line of worldwide research towards a sustainable energy future is the materials and processes for carbon dioxide capture and storage. Energy from fossil fuels combustion always generates carbon dioxide, leading to a considerable environmental concern with the values of CO2 produced in the world. The increase in emissions leads to a significant challenge in reducing the quantity of this gas in the atmosphere. Many research areas are involved solving this problem, such as process engineering, materials science, chemistry, waste management, and politics and public engagement. To decrease this problem, green and efficient solutions have been extensively studied, such as Carbon Capture Utilization and Storage (CCUS) processes. In 2015, the Paris Agreement was established, wherein the global temperature increase limit of 1.5 °C above pre-industrial levels was defined as maximum. To achieve this goal, a global balance between anthropogenic emissions and capture of greenhouse gase... [more]

This paper aims to investigate the usage of waste from Absorbent Hygienic Products (AHP) as a fuel for gasification or pyrolysis, two attractive routes to obtain valuable products and dispose of this kind of waste. The study experimentally investigated the devolatilization of coarsely shredded materials from diapers, in a laboratory-scale bubbling fluidized bed made of sand, as a representative preparatory step of the above-mentioned thermochemical conversions. Two versions of shredded materials were considered: as-manufactured diapers (AHPam, as a reference), and the cellulosic fraction of sterilized used diapers (AHPus). Results were presented, obtained from physical-chemical characterization of AHPam and AHPus (TGA, CHNS/O, proximate and ultimate analyses, XRF, ICP-AES, SEM-EDS), as well as from their devolatilizations at 500−600−700−800 °C under two different atmospheres (air plus nitrogen, or pure nitrogen as a reference). Generally, temperature influenced syngas composition the m... [more]

The tire pyrolysis oil is a waste-derived fuel with a lower cetane number and higher den-sity than diesel fuel, but this is a promising waste-based fuel for compression ignition en-gines. In the European Union, it is necessary to increase the bio-share of fuels, and the second-generation waste-derived blend components are essential for achieving the 2030 goals. The injection characteristics of tire pyrolysis oil and diesel oil were investigated on a Bosch solenoid type common rail (CR) injector. Six different premixed ratios were investi-gated, including in a low volume percentage 250 ppm and higher 10%, 20%, and 100% pyrolysis oil and 100% diesel oil. The simulation investigation was done in the AVL Fire software, the experimental investigations were done on a LDX CR injection test bench, and the videos were taken on an Olympus Ispeed 3 camera. The scope of the research was to record the flow pattern of the fuel mixture, flowing out of the high-pressure injector, from which the mixing... [more]

This paper analyzes the impact of the COVID-19 pandemic on economic growth and electricity consumption and investigates the hypothesis of the influence of this consumption on the gross domestic product (GDP) for Romania. Using time series on monthly electricity consumption and quarterly GDP and a multi-linear regression model, we performed an analysis of the evolution of these indicators for 2007−2020, a comparison between their behavior during the financial crisis vs. COVID-19 crisis, and empirically explore the relationships between GDP and electricity consumption or some of its components. The results of the analysis confirm that the shock of declining activity due to the COVID-19 pandemic had a severe negative impact on electric energy consumption and GDP in the first half of 2020, followed by a slight recovery. By using a linear regression model, long-term relationships between GDP and domestic and non-household electricity consumptions were found. The empirically estimated elasti... [more]

Intensive-stage fracturing in horizontal wells is a potentially new technology for reservoir stimulations of deep shale oil and gas. Due to a strong stress interaction among the dense fractures, the fracture geometry and stress field are very complicated, which are the bottlenecks of this technology. Aiming at simulating the intensive-stage fracturing, a coupled three-dimensional (3D) fracture model of multiple-fracture simultaneous propagation is proposed. The dynamic behavior of the fracture propagation and stress field was analyzed using this model. The perforation parameters were optimized for improving the fracture geometry equilibrium. The results showed that the exterior fractures of the multiple fractures penetrated by the horizontal well become the main fractures, while the interior fractures are drastically restrained. The exterior fracture widths increased with increasing injection time, while the interior fracture widths decreased with increasing injection time. An extruded... [more]

Despite coal being one of the major contributors of CO2, it remains a cheap and stable source of electricity. However, several countries have turned to solar energy in their goal to “green” their energy generation. Solar energy has the potential to displace coal with support from natural gas. In this study, an hourly power flow analysis was conducted to understand the potential, limitations, and implications of using solar energy as a driver for decommissioning coal power plants. To ensure the results’ robustness, the study presents a straightforward weather-driven scenario analysis that utilizes historical weather and electricity demand to generate representative scenarios. This approach was tested in Japan’s southernmost region, since it represents a regional grid with high PV penetration and a fleet of coal plants older than 40 years. The results revealed that solar power could decommission 3.5 GW of the 7 GW coal capacity in Kyushu. It was discovered that beyond 12 GW, solar power... [more]

Rational decision-making requires assessing the advantages and disadvantages of options, including nonmarket effects (such as environmental effects). This also applies to strategic decision-making in the industrial sector to select alternative renewable energy source (RES). Often, a variety of criteria can be used to select a renewable energy source, whereas no ideal family of criteria for renewable energy selection for industry has been defined in the literature. It was concluded that there is a need to support the actions of industrial development based on RES, which will contribute significantly to overcoming the limitations of the negative effect on the environment in terms of greenhouse gas emissions. There is a clear need for a systematic and polyvalent multicriteria approach to planning in industry. Therefore, a method for choosing the preferred renewable source of electricity for industry has been developed, which considers key criteria of RES choice: Expert opinions, the costs... [more]

Electrification offers an opportunity to decarbonize the transport sector, but it might also increase the need for flexibility options in the energy system, as the uncoordinated charging process of battery electric vehicles (BEV) can lead to a demand with high simultaneity. However, coordinating BEV charging by means of smart charging control can also offer substantial flexibility potential. This potential is limited by restrictions resulting from individual mobility behavior and preferences. It cannot be assumed that storage capacity will be available at times when the impact of additional flexibility potential is highest from a systemic point of view. Hence, it is important to determine the flexibility available per vehicle in high temporal (and spatial) resolution. Therefore, in this paper a Markov-Chain Monte Carlo simulation is carried out based on a vast empirical data set to quantify mobility profiles as accurately as possible and to subsequently derive charging load profiles. A... [more]

Automatic generation control (AGC) is primarily responsible for ensuring the smooth and efficient operation of an electric power system. The main goal of AGC is to keep the operating frequency under prescribed limits and maintain the interchange power at the intended level. Therefore, an AGC system must be supplemented with modern and intelligent control techniques to provide adequate power supply. This paper provides a comprehensive overview of various AGC models in diverse configurations of the power system. Initially, the history of power system AGC models is explored and the basic operation of AGC in a multi-area interconnected power system is presented. An in-depth analysis of various control methods used to mitigate the AGC issues is provided. Application of fast-acting energy storage devices, high voltage direct current (HVDC) interconnections, and flexible AC transmission systems (FACTS) devices in the AGC systems are investigated. Furthermore, AGC systems employed in different... [more]

This article discusses the current state and trends in the development of the electric power industry in Kazakhstan. An analysis of the energy supply and energy intensity of Kazakhstan’s GDP is provided in this paper. The results of the foresight of the risks and opportunities of the energy industry are described. This study identifies the relationship between the traditional development of the energy industry and the development of alternative energy sources. In addition, the work examines the risks and consequences of various trends in the development of national and global energy. Previous studies have shown that government efforts are insufficient in developing an alternative energy sector in Kazakhstan. The research results show that there is a need to transform energy production from traditional sources towards greater efficiency and environmental friendliness, as well as the active involvement of the business community in the development of an alternative energy market. This is... [more]

We report the design, fabrication, and characterization of a prototype that meets the form, fit, and function of a household 1.5 V AA battery, but which can be wirelessly recharged without removal from the host device. The prototype system comprises a low-frequency electrodynamic wireless power transmission (EWPT) receiver, a lithium polymer energy storage cell, and a power management circuit (PMC), all contained within a 3D-printed package. The EWPT receiver and overall system are experimentally characterized using a 238 Hz sinusoidal magnetic charging field and either a 1000 µF electrolytic capacitor or a lithium polymer (LiPo) cell as the storage cell. The system demonstrates a minimal operating field as low as 50 µTrms (similar in magnitude to Earth’s magnetic field). At this minimum charging field, the prototype transfers a maximum dc current of 50 µA to the capacitor, corresponding to a power delivery of 118 µW. The power effectiveness of the power management system is approximat... [more]

Considering the necessity of achieving economic development by keeping the quality of the environment, the aim of this paper is to study the impact of economic growth on GHG emissions in a sample of Central and Eastern European (CEE) countries (V4 countries, Bulgaria and Romania) in the period of 1996−2019. In the context of dynamic ARDL panel and environmental Kuznets curve (EKC), the relationship between GHG and GDP is N-shaped. A U-shaped relationship was obtained in the renewable Kuznets curve (RKC). Energy consumption, domestic credit to the private sector, and labor productivity contribute to pollution, while renewable energy consumption reduces the GHG emissions. However, more efforts are required for promoting renewable energy in the analyzed countries.

Cost reductions in nascent forms of Renewable Energy Technology (RET) are essential for them to contribute to the energy mix. Policy intervention can facilitate this cost reduction; however, this may require a significant investment from the public sector. These cost reductions fall into two broad categories: (1) incremental cost reductions through continual improvements to existing technologies, and (2) radical innovation where technologies that significantly differ from the incumbents are developed. This study presents a modelling methodology to integrate radical innovation in RET experience curve and learning investment analysis, using wave energy as an example nascent RET. This aims to quantify the potential effects of radical innovation on the learning investment, allowing the value of successful innovation to be better analysed. The study highlights the value offered by radical innovations in long-term deployment scenarios for wave energy. This suggests that high-risk R&D efforts... [more]

This study was performed to analyze the spray, combustion, and air pollutant characteristic of JP-5 fuel for naval aircraft in a spray visualization system and a single-cylinder CRDI diesel engine that can be visualized. The analysis results of JP-5 fuel were compared with DF. The spray tip penetration of JP-5 showed diminished results as the spray developed. JP-5 had the highest ROHR and ROPR regardless of the fuel injection timings. The physicochemical characteristics of JP-5, such as its excellent vaporization and low cetane number, were analyzed to prolong the ignition delay. Overall, the longer combustion period and the lower heat loss of the DF raised the engine torque and the IMEP. JP-5 showed higher O2 and lower CO2 levels than the DF fuel. The CO emission level increased as the injection timing was advanced in two test fuels, and the CO emitted from the DF fuel, which has a longer combustion period than JP-5, turned out to be lower. NOx also reduced as the fuel injection timin... [more]

Coal combustion is an anthropogenic source of mercury (Hg) emissions to the atmosphere. The strong toxicity and bioaccumulation potential have prompted attention to the control of mercury emissions. Pyrolysis has been regarded as an efficient Hg removal technology before coal combustion and other utilization processes. In this work, the Hg speciation in coal and its thermal stability were investigated by combined sequential chemical extraction and temperature programmed decomposition methods; the effect of coal rank on Hg speciation distribution and Hg release characteristics were clarified based on the weight loss of coal; the amount of Hg released; and the emission of sulfur-containing gases during coal pyrolysis. Five species of mercury were determined in this study: exchangeable Hg (F1), carbonate + sulfate + oxide bound Hg (F2), silicate + aluminosilicate bound Hg (F3), sulfide bound Hg (F4), and residual Hg (F5), which are quite distinct in different rank coals. Generally, Hg enr... [more]

To maximize the performance of power batteries and supercapacitors in a hybrid energy storage system (HESS) and to resolve the conflict between the high power demands of electric vehicles and the limitations of high-current charging and discharging of the power battery, a vehicle power demand model incorporating road slope information has been constructed. This paper takes a HESS composed of power battery and supercapacitor as the object, and a rule-based energy management strategy (EMS) based on road slope information is proposed to realize the reasonable distribution and management of energy under the slope condition. According to the slope information of the road ahead, the energy consumption in the next period was predicted, and the supercapacitor is charged and discharged in advance to meet the energy demand of uphill and the energy recovery capacity of downhill to avoid the high current charge and discharge of the battery. Subsequently, the improved EMS performance was simulated... [more]

The aim of this study was to evaluate the motorization market of electric vehicles powered by hydrogen cells in Poland. European conditions of such technology were indicated, as well as original proposals on amendments to the law to increase the development pace of electromobility based on hydrogen cells. There were also presented economic aspects of this economic phenomenon. Moreover, survey research was conducted to examine the preferences of hydrogen and electric vehicle users in 5 primary Polish cities. In this way, the level of social acceptance for the technological revolution based on hydrogen cells and taking place in the motorization sector was determined.

This manuscript illustrates the measurement results of parameters describing the quality of energy at the PCC (point of common coupling) of a photovoltaic micro-installation that can significantly affect devices in the same power grid. The analyses reflecting heating of selected devices used in domestic installations, which were performed in an isolated laboratory environment, are also indicated. The conducted study aimed at checking the thermal characteristics of the chosen equipment, i.e., AC/DC power supply, LED and fluorescent light sources, a step-down transformer at synergistically higher voltage harmonics and constant component in the network voltage. The tests were carried out at the disturbance levels recorded at the site of the photovoltaic micro-installation. The conducted tests aimed at indicating the presence of an increased level of synergetic disturbances in the vicinity of micro-photovoltaic installations. Based on the research, recommendations were made for photovoltai... [more]

Energy demand has been overgrowing in developing countries. Moreover, the fluctuation of fuel prices is a primary concern faced by many countries that highly rely on conventional power generation to meet the load demand. Hence, the need to use alternative resources, such as renewable energy, is crucial in order to mitigate fossil fuel dependency, while ensuring reductions in carbon dioxide emissions. Algeria—being the largest county in Africa—has experienced a rapid growth in energy demand over the past decade due to the significant increase in residential, commercial, and industry sectors. Currently, the hydrocarbon-rich nation is highly dependent on fossil fuels for electricity generation, with renewable energy only having a small contribution to the country’s energy mix. However, the country has massive potential for renewable energy generation, such as solar, wind, biomass, geothermal, and hydropower. Therefore, the government aims to diversify away from fossil fuels and promote re... [more]

Krakow has an extensive district heating network, which is approximately 900 km long. It is the second largest city in terms of the number of inhabitants in Poland, resulting in a high demand for energy—for both heating and cooling. The district heating of the city is based on coal. The paper presents the conception of using the available renewable sources to integrate them into the city’s heating system, increasing the flexibility of the system and its decentralization. An innovative solution of the use of hybrid, modular heat pumps with power dependent on the needs of customers in a given location and combining them with geothermal waters and photovoltaics is presented. The potential of deep geothermal waters is based on two reservoirs built of carbonate rocks, namely Devonian and Upper Jurassic, which mainly consist of dolomite and limestone. The theoretical potential of water intake equal to the nominal heating capacity of a geothermal installation is estimated at 3.3 and 2.0 MW, r... [more]

It is widely accepted that the market uptake of electric vehicles is essential for the decarbonisation of transport. However, scaling up the roll out of electric vehicles (EV) is challenging considering the lack of charging infrastructure. The latter is, currently, developing in an uneven way across the EU countries. A charging infrastructure with wide coverage addresses range limitations but requires high investment with uncertain returns during the early years of deployment. The aim of this paper is to assess how different policy options affect EV penetration and the involvement of private sector in infrastructure deployment. We propose a mathematical programming model of the decision problem and the interaction between the actors of EV charging ecosystem and apply it to the case of Greece from the time period until 2030. Greece represents a typical example of a country with ambitious targets for EV penetration by 2030 (10% of the total stock) with limited effort made until now. The... [more]

This paper presents an experimental investigation on photovoltaic array (PV array) power output affected by partial shading conditions (PSCs). An experiment setup of a PV array with a series configuration using 2 × 4 photovoltaic modules (PV modules) was built. The power output loss due to the shading effect on the first photovoltaic cells (PV cell) connected with bypass diodes of each photovoltaic module, installed in the PV array in the horizontal direction, was evaluated. Depending on the direction of the sun relative to the PV array configuration, the shading percentage was measured during the test and recorded the current and voltage of the PV array. The performance evaluation of the PV array configurations is referred to with respect to the values of maximum power voltage, the maximum power current, maximum power output, power output losses and fill factor (FF). The experimental results show that 44% shading of the first PV cells affects PV array power output loss by more than 80... [more]