Fuel production from hydrogen and carbon dioxide is considered an attractive solution as long-term storage of electric energy and as temporary storage of carbon dioxide. A large variety of CO2 sources are suitable for Carbon Capture Utilization (CCU), and the process energy intensity depends on the separation technology and, ultimately, on the CO2 concentration in the flue gas. Since the carbon capture process emits more CO2 than the expected demand for CO2 utilization, the most sustainable CO2 sources must be selected. This work aimed at modeling a Power-to-Gas (PtG) plant and assessing the most suitable carbon sources from a Life Cycle Assessment (LCA) perspective. The PtG plant was supplied by electricity from a 2030 scenario for Italian electricity generation. The plant impacts were assessed using data from the ecoinvent database version 3.5, for different CO2 sources (e.g., air, cement, iron, and steel plants). A detailed discussion on how to handle multi-functionality was also ca... [more]

It is well known that nowadays a significant part of the total energy consumption is related to buildings, so research for improving building energy efficiency is very important. This paper presents our investigations about the dimensioning of horizontal overhangs in order to determine the minimum annual consumption of building primary energy for heating, cooling and lighting. In this investigation, embodied energy for horizontal roof overhangs was taken into account. The annual simulation was carried out for a residential building located in the city of Belgrade (Serbia). Horizontal overhangs (roof and balcony) are positioned to provide shading of all exterior of the building. The building is simulated in the EnergyPlus software environment. The optimization of the overhang size was performed by using the Hooke Jeeves algorithm and plug-in GenOpt program. The objective function minimizes the annual consumption of primary energy for heating, cooling and lighting of the building and ene... [more]

Large-scale deployment of both biochemical and thermochemical routes for advanced biofuels production is seen as a key climate change mitigation option. This study addresses techno-economic and environmental aspects of advanced liquid biofuels production alternatives via biomass gasification and Fischer−Tropsch synthesis integrated to a typical sugarcane distillery. The thermochemical route comprises the conversion of the residual lignocellulosic fraction of conventional sugarcane (bagasse and straw), together with eucalyptus and energy-cane as emerging lignocellulosic biomass options. This work promotes an integrated framework to simulate the mass and energy balances of process alternatives and incorporates techno-economic analyses and sustainability assessment methods based on a life-cycle perspective. Results show that integrated biorefineries provide greenhouse gas emission reduction between 85−95% compared to the fossil equivalent, higher than that expected from a typical sugarcan... [more]

One way to perceive the electricity market is as a network of actors connected through transactions and monetary flows. By exploring the monetary flows in the electricity market, one adopts a holistic view which can provide insights on the interactions between different components of the benefits and costs, as well as on the possible conflicts or alliances between the involved actors of the system. The importance of such an analysis becomes even more evident when considering if the system’s state would change due to either the effectuation of a policy measure or a shift in the external drivers of the system. Additionally, by identifying conditions of conflicting interests between the involved actors, one can devise a roadmap of least-resistance for a policy measure to attain its goals. Our work is based on the premise that understanding and quantifying the monetary flows in the electricity market can contribute to the efficiency assessment of policy interventions in the market. We pres... [more]

Synergistic effect of cellulase and hemicellulase (xylanase) was evaluated because lignocellulosic material is a heterogeneous complex of cellulose and hemicellulose. Various effects of HTec2 addition on enzymatic saccharification and fermentation were evaluated using two different substrates such as corn stover and rice straw. Corn stover and rice straw were pretreated by the LMAA (low-moisture anhydrous ammonia) method at the preselected same conditions (90 °C, 120 h, moisture content = 50%, NH3 loading = 0.1 g NH3/g). It was observed that the enzymatic saccharification yield of pretreated corn stover (76.4% for glucan digestibility) was higher than that of pretreated rice straw (70.9% for glucan) using CTec2 cellulase without HTec2 addition. Glucan digestibility of pretreated corn stover was significantly increased from 76.4% to 91.1% when the HTec2/CTec2 (v/v) increased from 0 to 10. However, it was interesting that the ethanol production was decreased from 89.9% to 76.3% for SSF a... [more]

This paper aims to provide a quantitative understanding of the performance of numerical modeling of a wave field equation using general-purpose processors. In particular, this article presents the most important aspects related to the memory workloads and execution time of the numerical modeling of both acoustic and fully elastic waves in isotropic and anisotropic mediums. The results presented in this article were calculated for the staggered grid finite difference method. Our results show that the more realistic the seismic wave simulations that are performed, the more the demand for memory and the computational capacity of the computing environment increases. The results presented in this article allow the estimation of the memory requirements and computational time of wavefield modeling for the considered model (acoustic, elastic or anisotropic) so that their feasibility can be assessed in a given computing environment and within an acceptable time. Understanding the numerical mode... [more]

In this study, the growing scientific field of alternative biofuels was examined, with respect to hydrochars produced from renewable biomasses. Hydrochars are the solid products of hydrothermal carbonization (HTC) and their properties depend on the initial biomass and the temperature and duration of treatment. The basic (Scopus) and advanced (Citespace) analysis of literature showed that this is a dynamic research area, with several sub-fields of intense activity. The focus of researchers on sewage sludge and food waste as hydrochar precursors was highlighted and reviewed. It was established that hydrochars have improved behavior as fuels compared to these feedstocks. Food waste can be particularly useful in co-hydrothermal carbonization with ash-rich materials. In the case of sewage sludge, simultaneous P recovery from the HTC wastewater may add more value to the process. For both feedstocks, results from large-scale HTC are practically non-existent. Following the review, related data... [more]

Cheap and clean energy demand is continuously increasing due to economic growth and industrialization. The energy sectors of several countries still employ fossil fuels for power production and there is a concern of associated emissions of greenhouse gases (GHG). On the other hand, environmental regulations are becoming more stringent, and resultant emissions need to be mitigated. Therefore, optimal energy policies considering economic resources and environmentally friendly pathways for electricity generation are essential. The objective of this paper is to develop a comprehensive model to optimize the power sector. For this purpose, a multi-period mixed integer programming (MPMIP) model was developed in a General Algebraic Modeling System (GAMS) to minimize the cost of electricity and reduce carbon dioxide (CO2) emissions. Various CO2 mitigation strategies such as fuel balancing and carbon capture and sequestration (CCS) were employed. The model was tested on a case study from Pakista... [more]

This paper presents a gain scheduling output feedback control method to reduce driver workload and improve driving performance by considering input saturation. The driver−vehicle system model is developed by considering tire cornering stiffness uncertainties and different driver parameter uncertainties. Meanwhile, the input saturation is also considered in the driver-vehicle system. A quadratic Lyapunov function is designed to solve the optimization problem with uncertainties and input saturation. The results, which are based on the MATLAB-CarSim co-simulation platform, indicate that the robust controller not only improves the convergence rate of the state but also reduces the steering workload of the driver.

The paper presents a general approach to the steady-state efficiency analysis of one degree of freedom (1-DOF) speed increasers with one or two inputs, and one or two outputs, applicable to wind, hydro and marine-current power generating systems. The mechanical power flow, and the efficiency of this type of complex speed increasers, are important issues in the design and development of new power-generating systems. It is revealed that speed increases, with in-parallel transmission of the mechanical power from the wind or water rotors to the electric generator, have better efficiency than serial transmissions, but their efficiency calculus is still a challenging problem, solved in the paper by applying the decomposition method of complex speed increasers into simpler component planetary gear sets. Therefore, kinematic, steady-state torque and efficiency equations are derived for a generic 1-DOF speed increasers with two inputs and two outputs, obtained by connecting in parallel two gear... [more]

Various pulse decay methods are proposed to test tight cores. These methods can be divided into three types. This study compares the performance of these methods to test the permeability of unconventional cores in terms of homogeneous cores, dual-medium cores, and gas adsorption, including the pressure equilibrium time, possible errors caused by conventional analysis methods, and reflections on the characteristics of dual-media. Studies shows that the two test methods with an antisymmetric relationship in the boundary conditions have basically identical test performance. When testing homogeneous cores, regardless of whether the gas is adsorptive or not, the pressure equilibrium time of the first type of method is approximately half of that of the second type of method. The dual-medium parameters seriously affect the pressure equilibrium time of different methods, which may cause the difference of order of magnitude. For homogeneous cores, the permeability errors of the first and second... [more]

We introduce firm solar forecasts as a strategy to operate optimally overbuilt solar power plants in conjunction with optimally sized storage systems so as to make up for any power prediction errors, and hence entirely remove load balancing uncertainty emanating from grid-connected solar fleets. A central part of this strategy is the plant overbuilding that we term implicit storage. We show that strategy, while economically justifiable on its own account, is an effective entry step to achieving least-cost ultra-high solar penetration where firm power generation will be a prerequisite. We demonstrate that in the absence of an implicit storage strategy, ultra-high solar penetration would be vastly more expensive. Using the New York Independent System Operator (NYISO) as a case study, we determine current and future costs of firm forecasts for a comprehensive set of scenarios in each ISO electrical region, comparing centralized vs. decentralized production and assessing load flexibility’s... [more]

Thanks to the support of Inertial Navigation Systems (INS), Global Navigation Satellite Systems (GNSS) provide a navigation positioning solution that, in the absence of satellite signals (in tunnels, forest and urban areas), allows the continuous positioning of a moving object (air, land and sea). Passenger and freight trains must, for safety reasons, comply with several formal navigation requirements, particularly those that concern the minimum acceptable accuracy for determining their position. Depending on the type of task performed by the train (positioning a vehicle on a route, stopping at a turnout, stopping at a platform, monitoring the movement of rolling stock, etc.), the train must have positioning systems that can determine its position with sufficient accuracy (1−10 m, p = 0.95) to perform the tasks in question. A wide range of INS/GNSS equipment is currently available, ranging from very costly to simple solutions based on Micro-Electro-Mechanical Systems (MEMS), which, in... [more]

We examined the effects of oil prices along with fundamental economic variables on exchange rate movements in the Korean and Japanese foreign exchange markets, using two-regime Markov Regime Switching Models (MRSMs) over the period from January 1991 to March 2019. We selected the best MRSMs explaining their exchange rate movements using the Maximum Log-Likelihood and Akaike Information Criteria, and analyze effects of oil prices on their exchange rates based on the selected best MRSMs. We consider two regimes, regime 1 with high-volatility and regime 2 with low-volatility. In Korea, two apparent regimes are observed, and unstable regime 1 consists of two distinct prolonged periods, the 1997 Asian Financial Crisis and the 2008 Global Financial Crisis. Meanwhile in Japan, no evident prolonged regimes are observed. Rather, the two regimes occasionally alternate. Oil prices influence exchange rate movements in regime 2 with low-volatility in Korea, while they do not influence exchange rate... [more]

In this paper, the lattice Boltzmann pseudo-potential model coupled the Carnahan−Starling (C-S) equation of state and Li’s force scheme are used to study the collapse process of cavitation bubbles near the concave wall. It mainly includes the collapse process of the single and double cavitation bubbles in the near-wall region. Studies have shown that the collapse velocity of a single cavitation bubble becomes slower as the additional pressure reduces, and the velocity of the micro-jet also decreases accordingly. Moreover, the second collapse of the cavitation bubble cannot be found if the additional pressure reduces further. When the cavitation bubble is located in different angles with vertical direction, its collapse direction is always perpendicular to the wall. If the double cavitation bubbles are arranged vertically, the collapse process of the upper bubble will be quicker, as the relative distance increases. When the relative distance between the bubbles is large enough, no secon... [more]

Direct lightning strikes on overhead phase conductors result in high overvoltage stress on the medium voltage (MV) terminals of pole-mounted transformers, which may cause considerable damage. Therefore, introducing an efficient protection strategy would be a remedy for alleviating such undesirable damages. This paper investigates the optimized protection of MV transformers against direct lightning strikes on the phase conductors. To this end, first, the impacts of grounding densities (number of grounded intermediate poles between every two successive transformer poles) on the probability of overvoltage stress on transformer terminals are investigated. Then, the implications of guy wire, as a supporting device for ungrounded intermediate poles, on reducing the overvoltage stress on transformers, are studied. Finally, the role of a surge arrester in mitigating the overvoltage stress of non-surge-arrester-protected transformer poles is scrutinized. The investigations are conducted on a sa... [more]

The broader use of cements with a higher content of the main non-clinker components in construction industry is one of the directions leading to the decarbonization in cement production. This contribution analyzes the properties of low-emission cements containing from 44% to 56% of Portland clinker in their composition and indicates the possibilities of wider use in the construction. The obtained results confirmed that following the appropriate technological regimes, low-emission cements can be implemented into the production of concrete exposed to carbonation-induced corrosion (exposure class XC4 according to EN 206), frost-resistant concrete (exposure class XF4 according to EN 206), self-compacting concrete (SCC) and high-performance concrete (HPC). An analysis of the level of CO2 emissions in the production of specific types of concrete using low-emission cements was also made.