Browse
Records Added in April 2023
Records added in April 2023
Change year: 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | 2026
Change month: January | February | March | April | May | June | July | August | September | October | November | December
Showing records 8668 to 8692 of 9292. [First] Page: 1 344 345 346 347 348 349 350 351 352 Last
A Review about the Modeling and Simulation of Electro-Quasistatic Fields in HVDC Cable Systems
Christoph Jörgens, Markus Clemens
April 3, 2023 (v1)
Keywords: electro-osmosis, high voltage direct current, nonlinear electric conductivity, numerical simulation, space charges
In comparison to high-voltage alternating current (HVAC) cable systems, high-voltage direct current (HVDC) systems have several advantages, e.g., the transmitted power or long-distance transmission. The insulating materials feature a non-linear dependency on the electric field and the temperature. Applying a constant voltage, space charges accumulate in the insulation and yield a slowly time-varying electric field. As a complement to measurements, numerical simulations are used to obtain the electric field distribution inside the insulation. The simulation results can be used to design HVDC cable components such that possible failure can be avoided. This work is a review about the simulation of the time-varying electric field in HVDC cable components, using conductivity-based cable models. The effective mechanisms and descriptions of charge movement result in different conductivity models. The corresponding simulation results of the models are compared against measurements and analytic... [more]
Electricity Price Forecasting Based on Self-Adaptive Decomposition and Heterogeneous Ensemble Learning
Matheus Henrique Dal Molin Ribeiro, Stéfano Frizzo Stefenon, José Donizetti de Lima, Ademir Nied, Viviana Cocco Mariani, Leandro dos Santos Coelho
April 3, 2023 (v1)
Keywords: complementary ensemble empirical mode decomposition, electricity price forecasting, ensemble learning models, exogenous variables, short-term forecasting
Electricity price forecasting plays a vital role in the financial markets. This paper proposes a self-adaptive, decomposed, heterogeneous, and ensemble learning model for short-term electricity price forecasting one, two, and three-months-ahead in the Brazilian market. Exogenous variables, such as supply, lagged prices and demand are considered as inputs signals of the forecasting model. Firstly, the coyote optimization algorithm is adopted to tune the hyperparameters of complementary ensemble empirical mode decomposition in the pre-processing phase. Next, three machine learning models, including extreme learning machine, gradient boosting machine, and support vector regression models, as well as Gaussian process, are designed with the intent of handling the components obtained through the signal decomposition approach with focus on time series forecasting. The individual forecasting models are directly integrated in order to obtain the final forecasting prices one to three-months-ahea... [more]
Communication-Based Approach for Promoting Energy Consumer Switching: Some Evidence from Ofgem’s Database Trials in the United Kingdom
Muyi Yang, Yuanying Chi, Kristy Mamaril, Adam Berry, Xunpeng Shi, Liming Zhu
April 3, 2023 (v1)
Subject: Energy Policy
Keywords: behavioural economics, communication-based interventions, fairness, price discrimination, weak consumer switching
Prompted by rising concern about weak consumer switching and the practice of price discrimination, over the period of 2016−2019, the Office of Gas and Electricity Markets (Ofgem) undertook a series of trials on communication-based interventions to encourage consumer switching in the United Kingdom. The main purpose of this paper is to assess the experience of these Ofgem trials with a view to draw some lessons for policy makers. The analytical framework adopted for this purpose is informed by existing literature on the barriers for consumer switching. The results of the analysis suggest that while the Ofgem trials have made positive impacts on consumer switching, these impacts varied significantly across the trials, suggesting that some interventions were more effective than others. Further, the overall impacts of the Ofgem trials were moderate, as around 70% of participants did not switch suppliers even in the most impactful trial. This reflects a general lack of understanding in the... [more]
Optimal Day-Ahead Scheduling of Microgrids with Battery Energy Storage System
Vanderlei Aparecido Silva, Alexandre Rasi Aoki, Germano Lambert-Torres
April 3, 2023 (v1)
Keywords: availability cost, battery energy storage system, controllable loads, energy management system, intentional islanding, linear programming, microgrid modeling, microgrid optimization, optimal scheduling, shiftable loads
Optimal scheduling is a requirement for microgrids to participate in current and future energy markets. Although the number of research articles on this subject is on the rise, there is a shortage of papers containing detailed mathematical modeling of the distributed energy resources available in a microgrid. To address this gap, this paper presents in detail how to mathematically model resources such as battery energy storage systems, solar generation systems, directly controllable loads, load shedding, scheduled intentional islanding, and generation curtailment in the microgrid optimal scheduling problem. The proposed modeling also includes a methodology to determine the availability cost of battery and solar systems assets. Simulations were carried out considering energy prices from an actual time-of-use tariff, costs based on real market data, and scenarios with scheduled islanding. Simulation results provide support to validate the proposed model. Data illustrate how energy arbitr... [more]
Analysis and Implementation of Inverter Wide-Range Soft Switching in WPT System Based on Class E Inverter
Shaoteng Zhang, Jinbin Zhao, Yuebao Wu, Ling Mao, Jiongyuan Xu, Jiajun Chen
April 3, 2023 (v1)
Subject: Optimization
Keywords: class E inverter, soft switch, source coil optimization, wireless power transmission system
This article addresses the problem of hard switching caused by the change of equivalent load in a wireless power transfer (WPT) system based on a class E inverter. Based on the load-sensitive characteristics of the class E inverter, the coil structure is improved, and the self/mutual inductance compensation method of the transmitting coil is proposed to realize a wide range of soft switching. On the basis of fully considering the coupling relationship between the source and load coils, a coil structure with multiple coils in series on the primary side is proposed, and the cross-coupling relationship between the coils is analyzed in detail and simplified. The inverter parameters and coupling mechanism were adjusted by means of coil series reverse connection. Combined with the parameter influence law and the load equivalent principle of the class E inverter, the margin of soft switching at the inverter side was increased and the load offset correction was carried out. The soft-switching... [more]
Combustion Modeling and Simulation of Recycled Anode-off-Gas from Solid Oxide Fuel Cell
Sataish Asghar Kashmiri, Muhammad Wasim Tahir, Umer Afzal
April 3, 2023 (v1)
Keywords: ANSYS Fluent, combustion, Computational Fluid Dynamics, fuel cell, Modelling, SOFC
A solid oxide fuel cell (SOFC) is popular amongst other fuel cell technologies due to fuel flexibility, low cost, and stability. Because of difficulties involved in the handling of hydrogen, onsite hydrogen production is considered for many small- and large-scale applications. It involves an integrated setup consisting of a reformer, combustor, and fuel cell stack. Being operated at high temperature, gases leaving SOFC contain a significant amount of thermal energy which can be utilized within the integrated reforming process. In addition, anode-off-gas (AOG) from SOFC contains unreacted hydrogen which can be utilized as fuel in an integrated combustor thereby increasing combustor efficiency. For effective integration of a combustor, reformer, and power generator, modeling and simulation is of great utility. In the present work, a 3D model of an integrated combustor unit is developed and implemented into the computational fluid dynamics (CFD) simulation package ANSYS FLUENT®. Main obje... [more]
Analysis of AMI Communication Methods in Various Field Environments
Dong Sik Kim, Beom Jin Chung, Young Mo Chung
April 3, 2023 (v1)
Subject: Environment
Keywords: advanced metering infrastructure (AMI), linear regression analysis, power line communication (PLC), wireless communication
In order to construct an efficient on-site communication network for an advanced metering infrastructure (AMI) in Korea, the high-speed power line communication (HS PLC), wireless smart utility network (Wi-SUN), and ZigBee modems are currently being used. In this paper, we first quantitatively analyze the communication performances of HS PLC, Wi-SUN, and ZigBee modems for AMI through both experimental testbeds and practical environment sites. For practical AMI sites, we selected 18 sites with 48 measurement points and classified the sites into five areas, and conducted measurements of signal and noise power spectra on the sites. We then derived linear regression models for received powers according to areas. Through the constructed models, we can efficiently choose an appropriate communication method and plan a methodology for building an AMI network depending on the area type. Furthermore, using the constructed regression models, we provided graphical simulation tools of received powe... [more]
Aerodynamic Study of the Wake Effects on a Formula 1 Car
Alex Guerrero, Robert Castilla
April 3, 2023 (v1)
Keywords: Computational Fluid Dynamics (CFD), downforce, drag, external aerodynamics, Federation Internationale de l’Automobile (FIA), Formula 1, incompressible flow, OpenFoam, snappyHexMesh, vortex, wake
The high complexity of current Formula One aerodynamics has raised the question of whether an urgent modification in the existing aerodynamic package is required. The present study is based on the evaluation and quantification of the aerodynamic performance on a 2017 spec. adapted Formula 1 car (the latest major aerodynamic update) by means of Computational Fluid Dynamics (CFD) analysis in order to argue whether the 2022 changes in the regulations are justified in terms of aerodynamic necessities. Both free stream and flow disturbance (wake effects) conditions are evaluated in order to study and quantify the effects that the wake may cause on the latter case. The problem is solved by performing different CFD simulations using the OpenFoam solver. The significance and originality of the research may dictate the guidelines towards an overall improvement of the category and it may set a precedent on how to model racing car aerodynamics. The studied behaviour suggests that modern F1 cars a... [more]
Controls on Pore Structures and Permeability of Tight Gas Reservoirs in the Xujiaweizi Rift, Northern Songliao Basin
Luchuan Zhang, Shu Jiang, Dianshi Xiao, Shuangfang Lu, Ren Zhang, Guohui Chen, Yinglun Qin, Yonghe Sun
April 3, 2023 (v1)
Keywords: clay minerals, Northern Songliao Basin, permeability, pore structures, tight gas reservoirs, Xujiaweizi Rift
As significant components of tight gas reservoirs, clay minerals with ultrafine dimensions play a crucial role in controlling pore structures and permeability. XRD (X-ray diffraction), SEM (scanning electron microscopy), N2GA (nitrogen gas adsorption), and RMIP (rate-controlled mercury injection porosimetry) experiments were executed to uncover the effects of clay minerals on pore structures and the permeability of tight gas reservoirs, taking tight rock samples collected from the Lower Cretaceous Dengloukou and Shahezi Formations in the Xujiaweizi Rift of the northern Songliao Basin as an example. The results show that the pore space of tight gas reservoirs primarily comprises intragranular-dominant pore networks and intergranular-dominant pore networks according to fractal theory and mercury intrusion features. The former is interpreted as a conventional pore-throat structure where large pores are connected by wide throats, mainly consisting of intergranular pores and dissolution por... [more]
Dielectric Barrier Discharge Systems with HV Generators and Discharge Chambers for Surface Treatment and Decontamination of Organic Products
Jan Mucko, Robert Dobosz, Ryszard Strzelecki
April 3, 2023 (v1)
Keywords: decontamination of organic loose products, dielectric barrier discharge, nonthermal plasma, resonant inverter, treatment of plastic surface
The article presents applications of systems with power electronic converters, high voltage transformers, and discharge chambers used for nonthermal, dielectric barrier discharge plasma treatment of a plastic surface and decontamination of organic loose products. In these installations, the inductance of the high voltage transformers and the capacitances of the electrode sets form resonant circuits that are excited by inverters. The article presents characteristic features of the installations and basic mathematical relationships as well as the impact of individual parameters of system components. These converters with their output installations were designed, built, and tested by the authors. Some of the converters developed by the authors are manufactured and used in the industry.
Islanding Detection Using a Micro-Synchrophasor for Distribution Systems with Distributed Generation
Karthikeyan Subramanian, Ashok Kumar Loganathan
April 3, 2023 (v1)
Keywords: distributed generation, islanding detection, micro-synchrophasor, power distribution systems, smart grid
Distributed Generation (DG) has changed the power generation system to small-scale instead of large-scale generation. The demanding issue with the interconnection of DG is the detection of unintended islanding in a network. Several methods proposed in the literature show drawbacks such as high non-detection zones (NDZ) and higher tripping time. In this paper, the IEEE 13 bus distribution network with DGs like wind and solar power plants is integrated at two buses. Islanding is detected by utilizing data from a micro-synchrophasor located at the distribution grid and the DG. The micro-synchrophasor-based unintended islanding detection algorithm is based on parameters such as voltage, rate of change of voltage, frequency, rate of change of frequency, voltage phase angle difference and the rate of change of the voltage phase angle difference between the utility and the islanded grid. The proposed islanding detection algorithm discriminates between islanding and non-islanding conditions an... [more]
A Novel Single-Wire Power Transfer Method for Wireless Sensor Networks
Yang Li, Rui Wang, Yu-Jie Zhai, Yao Li, Xin Ni, Jingnan Ma, Jiaming Liu
April 3, 2023 (v1)
Subject: Other
Keywords: power supply method, single wire power transfer, wireless sensor networks
Wireless sensor networks (WSNs) have broad application prospects due to having the characteristics of low power, low cost, wide distribution and self-organization. At present, most the WSNs are battery powered, but batteries must be changed frequently in this method. If the changes are not on time, the energy of sensors will be insufficient, leading to node faults or even networks interruptions. In order to solve the problem of poor power supply reliability in WSNs, a novel power supply method, the single-wire power transfer method, is utilized in this paper. This method uses only one wire to connect source and load. According to the characteristics of WSNs, a single-wire power transfer system for WSNs was designed. The characteristics of directivity and multi-loads were analyzed by simulations and experiments to verify the feasibility of this method. The results show that the total efficiency of the multi-load system can reach more than 70% and there is no directivity. Additionally, t... [more]
Thermodynamic and Cost Analysis of a Solar Dish Power Plant in Spain Hybridized with a Micro-Gas Turbine
Judit García-Ferrero, Irene Heras, María Jesús Santos, Rosa Pilar Merchán, Alejandro Medina, Antonio González, Antonio Calvo Hernández
April 3, 2023 (v1)
Keywords: Brayton cycles, concentrated solar power, distributed energy production, parabolic dish, thermo-economic analysis
Small-scale hybrid parabolic dish concentrated solar power systems are a promising option to obtain distributed electricity. During the day, solar energy is used to produce electricity, and the absence of sunlight can be overwhelmed with fuel combustion. This study presents a thermo-economic survey for a hybridized power plant in different regions of Spain, considering the local climatic conditions. The developed model considers the instant solar irradiance and ambient temperature dynamically, providing an estimation of the power output, the associated fuel consumption, and the most relevant pollutant emissions linked to combustion. Hybrid and combustion-only operating modes at selected geographical locations in Spain (with different latitudes, mean solar irradiances, and meteorological conditions) are analyzed. The levelized cost of electricity indicator is estimated as a function of investment, interest rate, maintenance, and fuel consumption actual costs in Spain. Values of about 12... [more]
Towards the Design of P2P Energy Trading Scheme Based on Optimal Energy Scheduling for Prosumers
Koo-Hyung Chung, Don Hur
April 3, 2023 (v1)
Keywords: consumer surplus, distributed energy resource, energy prosumer, optimal energy scheduling, peer-to-peer (P2P) energy trading
The peer-to-peer (P2P) energy trading is anchored in more efficient usage of electric power by allowing excess electric power from energy prosumers to be harnessed by other end-users. To boost the P2P energy trading, it is of pivotal significance to call on energy prosumers and end-users to actively participate in the trading while sharing information with a greater degree of freedom. In this perspective, this paper purports to implement the P2P energy trading scheme with an optimization model to assist in energy prosumers’ decisions by reckoning on hourly electric power available in the trading via the optimal energy scheduling of the energy trading and sharing system (ETS). On a purely practical level, it is assumed that all trading participants neither join the separate bidding processes nor are forced to comply with the predetermined optimal schedules for a trading period. Furthermore, this paper will be logically elaborated with reference to not only the determination of transacti... [more]
Transfer Characteristics of the Nonlinear Parity-Time-Symmetric Wireless Power Transfer System at Detuning
Changsheng Li, Wenjie Dong, Libo Ding, He Zhang, Hang Sun
April 3, 2023 (v1)
Subject: Other
Keywords: detuning, nonlinear parity-time symmetry (NPTS), wireless power transfer (WPT)
The nonlinear parity-time-symmetric wireless power transfer (NPTS-WPT) system is more robust against transfer distance than the traditional WPT system. Current studies mainly focus on the situation in which the transmitter (Tx) and the receiver (Rx) are completely matched. Our study focuses on the transfer characteristics of the NPTS-WPT system under detuning between the Tx and the Rx. First, the mathematical model of the detuned system is established, and then the model is solved using Shengjin’s formula. Then, the exact analytical solutions for the operating frequency, the amplification factor of the operational amplifier (OP Amp) and the transfer efficiency at detuning are obtained. It was noted, for the first time, that even though the Tx and the Rx were completely matched, a frequency jump could occur when the distance between the Tx and Rx coils slowly changed. Our study found that when the degree of detuning of the system changed, the operating frequency of the system could jump... [more]
Detection of DoS Attacks Using ARFIMA Modeling of GOOSE Communication in IEC 61850 Substations
Ghada Elbez, Hubert B. Keller, Atul Bohara, Klara Nahrstedt, Veit Hagenmeyer
April 3, 2023 (v1)
Keywords: ARFIMA model, cyber-physical security, DoS attacks, IEC 61850 electrical substations, intrusion detection, model-based anomaly detection, substation communication network
Integration of Information and Communication Technology (ICT) in modern smart grids (SGs) offers many advantages including the use of renewables and an effective way to protect, control and monitor the energy transmission and distribution. To reach an optimal operation of future energy systems, availability, integrity and confidentiality of data should be guaranteed. Research on the cyber-physical security of electrical substations based on IEC 61850 is still at an early stage. In the present work, we first model the network traffic data in electrical substations, then, we present a statistical Anomaly Detection (AD) method to detect Denial of Service (DoS) attacks against the Generic Object Oriented Substation Event (GOOSE) network communication. According to interpretations on the self-similarity and the Long-Range Dependency (LRD) of the data, an Auto-Regressive Fractionally Integrated Moving Average (ARFIMA) model was shown to describe well the GOOSE communication in the substation... [more]
Modelling of Hard Coal Beneficiation Process Utilising Negative Pressure Pneumatic Separator
Kamil Stańczyk
April 3, 2023 (v1)
Keywords: aerodynamic separation, coal enrichment, coal waste processing, Computational Fluid Dynamics, deshaling, dry coal beneficiation, mathematical model, negative pressure system, NPPS, numerical modelling
The dry separation methods for coal beneficiation have been regaining attention in the past decades. A number of improved or newly designed devices have been developed—one of them is a negative pressure pneumatic separator (NPPS). The said method of separation is based on the differences in the physical properties between coal and gangue minerals, such as the grain density, size, and shape. The aim of the hereby presented work was to develop working models describing the operation of the NPPS. To validate the models, the calculation results were compared with experimental results of the tests carried out in the previous study on the topic. Based on the findings it can be inferred that the models accurately predict the separation results, i.e., the majority of results are within the range of estimated measurement uncertainties. Consequently, the models allow one to optimise the process to obtain the products with desirable properties.
Modeling and Experimental Investigation of Electromagnetic Interference (EMI) for SiC-Based Motor Drive
Yingzhe Wu, Shan Yin, Hui Li, Minghai Dong
April 3, 2023 (v1)
Keywords: electromagnetic interference (EMI), motor drive, motor impedance, silicon carbide (SiC) MOSFET, switching characteristics
The motor drive has been widely adopted in modern power applications. With the emergency of the next generation wide bandgap semiconductor device, such as silicon carbide (SiC) MOSFET, performance of the motor drive can be improved in terms of efficiency, power density, and reliability. However, the fast switching transient and serious switching ringing of the SiC MOSFET can cause unwanted high-frequency (HF) electromagnetic interference (EMI), which may significantly reduce the reliability of the motor drive in many aspects. In order to comprehensively reveal the mechanism of the EMI previously used in motor drives using SiC MOSFET, this paper plans to analyze the influences of both HF impedance of the motor and switching characteristics of the SiC MOSFET. A simulation model for motor drives has been proposed, which contains the HF circuit model of the motor as well as a semi-behavioral analytical model of the SiC MOSFET. Since the model shows a good agreement with the experimentally... [more]
Micro Nuclear Reactors: Potential Replacements for Diesel Gensets within Micro Energy Grids
Hossam A. Gabbar, Muhammad R. Abdussami, Md. Ibrahim Adham
April 3, 2023 (v1)
Keywords: diesel genset, micro energy grid, microreactor, optimal system, renewable energy sources, sensitivity analysis
Resilient operation of medium/large scale off-grid energy systems, which is a key challenge for energy crisis solutions, requires continuous and sustainable energy resources. Conventionally, micro energy grids (MEGs) are adopted to supply electricity and thermal energy simultaneously. Fossil-fired gensets, such as diesel generators, are indispensable components for off-grid MEGs due to the intermittent nature of renewable energy sources (RESs). However, fossil-fired gensets emit a significant amount of greenhouse gases (GHGs). Therefore, this study investigates an alternative source as an economical and environmental replacement for diesel gensets that can reduce GHG emissions and ensure system reliability. A MEG is developed in this paper to support a considerably large-scale electric and thermal demand at Ontario Tech University (UOIT). Different sizes of diesel gensets and RESs, such as solar, wind, hydro, and biomass, are combined in the MEG for off-grid applications. To evaluate d... [more]
Machine Learning Modeling for Energy Consumption of Residential and Commercial Sectors
Seyed Azad Nabavi, Alireza Aslani, Martha A. Zaidan, Majid Zandi, Sahar Mohammadi, Naser Hossein Motlagh
April 3, 2023 (v1)
Keywords: artificial neural network, energy modeling, logarithmic multi-linear regression, Machine Learning, multiple linear regression, NARX, residential and commercial sectors
Energy has a strategic role in the economic and social development of countries. In the last few decades, energy demand has been increasing exponentially across the world, and predicting energy demand has become one of the main concerns in many countries. The residential and commercial sectors constitute about 34.7% of global energy consumption. Anticipating energy demand in these sectors will help governments to supply energy sources and to develop their sustainable energy plans such as using renewable and non-renewable energy potentials for the development of a secure and environmentally friendly energy system. Modeling energy consumption in the residential and commercial sectors enables identification of the influential economic, social, and technological factors, resulting in a secure level of energy supply. In this paper, we forecast residential and commercial energy demands in Iran using three different machine learning methods, including multiple linear regression, logarithmic m... [more]
Investigation of Black-Starting and Islanding Capabilities of a Battery Energy Storage System Supplying a Microgrid Consisting of Wind Turbines, Impedance- and Motor-Loads
Jürgen Marchgraber, Wolfgang Gawlik
April 3, 2023 (v1)
Keywords: black-start, cold load pickup, islanding, master–slave control approach, microgrid
Microgrids are small scale electrical power systems that comprise distributed energy resources (DER), loads, and storage devices. The integration of DER into the electrical power system basically allows the clustering of small parts of the main grid into Microgrids. Due to the increasing amount of renewable energy, which is integrated into the main grid, high power fluctuations are expected to become common in the next years. This carries the risk of blackouts to be also more likely in the future. Microgrids hold the potential of increasing reliability of supply, since they are capable of providing a backup supply during a blackout of the main grid. This paper investigates the black-starting and islanding capabilities of a battery energy storage system (BESS) in order to provide a possible backup supply for a small part of the main grid. Based on field tests in a real Microgrid, the backup supply of a residential medium voltage grid is tested. Whereas local wind turbines within this gr... [more]
Review of Key Performance Indicators for Process Monitoring in the Mining Industry
Paulina Gackowiec, Marta Podobińska-Staniec, Edyta Brzychczy, Christopher Kühlbach, Toyga Özver
April 3, 2023 (v1)
Keywords: key performance indicators, mining industry, mining process, process monitoring, sustainable management
The sustainable development of an organisation requires a holistic approach to the evaluation of an enterprise’s goals and activities. The essential means enabling an organisation to achieve goals are business processes. Properly managed, business processes are a source of revenue and become an implementation of business strategy. The critical elements in process management in an enterprise are process monitoring and control. It is therefore essential to identify the Key Performance Indicators (KPIs) that are relevant to the analysed processes. Process monitoring can be performed at various levels of management, as well as from different perspectives: operational, financial, security, or maintenance. Some of the indicators known from other fields (such as personnel management, finance, or lean manufacturing) can be used in mining. However, the operational mining processes require a definition of specific indicators, especially in the context of increasing the productivity of mining mac... [more]
Monte Carlo Investigation of the UK’s First EPR Nuclear Reactor Startup Core Using Serpent
Jinfeng Li
April 3, 2023 (v1)
Keywords: computational neutronics, European pressurised reactor, Monte Carlo simulation, nuclear energy, nuclear physics, nuclear power, nuclear reactor core modelling, nuclear safety, Shannon entropy, thermal hydraulics
Computationally modelling a nuclear reactor startup core for a benchmark against the existing models is highly desirable for an independent assessment informing nuclear engineers and energy policymakers. For the first time, this work presents a startup core model of the UK’s first Evolutionary Pressurised Water Reactor (EPR) based on Monte Carlo simulations of particle collisions using Serpent 2, a state-of-the-art continuous-energy Monte Carlo reactor physics burnup code. Coupling between neutronics and thermal-hydraulic conditions with the fuel depletion is incorporated into the multi-dimensional branches, obtaining the thermal flux and fission reaction rate (power) distributions radially and axially from the three dimensional (3D) single assembly level to a 3D full core. Shannon entropy is quantified to characterise the convergence behaviour of the fission source distribution, with 3 billion neutron histories tracked by parallel computing. Source biasing is applied for the variance... [more]
NSGA-II-Based Codesign Optimization for Power Conversion and Controller Stages of Interleaved Boost Converters in Electric Vehicle Drivetrains
Dai-Duong Tran, Sajib Chakraborty, Yuanfeng Lan, Mohamed El Baghdadi, Omar Hegazy
April 3, 2023 (v1)
Keywords: electric vehicle drivetrains, finite element analysis, interleaved boost converter, multiport converter, non-dominated sorted genetic algorithm, optimal type-III controller, SiC MOSFET modules, simultaneous codesign optimization
This article proposes a holistic codesign optimization framework (COF) to simultaneously optimize a power conversion stage and a controller stage using a dual-loop control scheme for multiphase SiC-based DC/DC converters. In this study, the power conversion stage adopts a non-isolated interleaved boost converter (IBC). Besides, the dual-loop control scheme uses type-III controllers for both inner- and outer- loops to regulate the output voltage of the IBC and tackle its non-minimum phase issue. Based on the converter architecture, a multi-objective optimization (MOO) problem including four objective functions (OFs) is properly formulated for the COF. To this end, total input current ripple, total weight of inductors and total power losses are selected as three OFs for the power conversion stage whilst one OF called integral of time-weighted absolute error is considered for the controller stage. The OFs are expressed in analytical forms. To solve the MOO problem, the COF utilizes a non-... [more]
Characteristics of Gel Time and Dielectric Strength of Epoxy Composite According to the Mixing Ratio of Micro-Fillers
Dong-Hun Oh, Ho-Seung Kim, Jae-Hun Shim, Young-Ho Jeon, Da-Won Kang, Bang-Wook Lee
April 3, 2023 (v1)
Subject: Materials
Keywords: Al2O3, dielectric strength, epoxy composite, gel time, MICRO-filler, mixing ratio, SiO2
The dielectric strength and gel time of epoxy composites vary with the mixing ratio of epoxy resin, hardener, additives, filler, etc., and especially the gel time affects the productivity and economics of ultra-high-voltage (UHV) equipment. However, previous studies focused only on the dielectric strength of epoxy composites for the reliability of UHV equipment. Therefore, a study considering both the dielectric strength and gel time of the epoxy composite is required. In this paper, the characteristics of the gel time and dielectric strength of the epoxy micro-composites according to the mixing ratio of silica (SiO2) and alumina (Al2O3) micro-fillers without changing the mixing ratio of epoxy resin and hardener are analyzed. Experimental results show that the gel time decreased and the dielectric strength increased as the mixing ratio of the SiO2 micro-filler increased. Therefore, it is concluded that the gel time can be controlled by changing the mixing ratio of micro-fillers without... [more]
Showing records 8668 to 8692 of 9292. [First] Page: 1 344 345 346 347 348 349 350 351 352 Last
(0.07 seconds)
Change year: 2018 | 2019 | 2020 | 2021 | 2022 | 2023 | 2024 | 2025 | 2026
Change month: January | February | March | April | May | June | July | August | September | October | November | December

[0.08 s]