In this study, an adaptive driving method for synchronous rectification in bidirectional full-bridge LLC resonant converters used in railway applications is proposed. The drain to source voltage of the synchronous rectifier is utilized to detect the conduction of the body diode, and a suitable driving signal for synchronous rectification is generated accordingly. The proposed driving scheme is simple and can be realized using a low-cost digital signal processor (DSP). According to the experimental results, which averaged 0.4625% and 1.097%, improvement can be observed under charging and discharging mode, respectively.

The problem of analyzing a big amount of user data to determine their preferences and, based on these data, to provide recommendations on new products is important. Depending on the correctness and timeliness of the recommendations, significant profits or losses can be obtained. The task of analyzing data on users of services of companies is carried out in special recommendation systems. However, with a large number of users, the data for processing become very big, which causes complexity in the work of recommendation systems. For efficient data analysis in commercial systems, the Singular Value Decomposition (SVD) method can perform intelligent analysis of information. With a large amount of processed information we proposed to use distributed systems. This approach allows reducing time of data processing and recommendations to users. For the experimental study, we implemented the distributed SVD method using Message Passing Interface, Hadoop and Spark technologies and obtained the r... [more]

Heavy metals have adverse effects on microalgae metabolism and growth. Photosynthesis and lipid profile are quite sensitive to heavy metal toxicity. The impact of hexavalent chromium—Cr(VI) on photosynthesis and lipid accumulation in Mucidosphaerium pulchellum and Micractinium pusillum exposed to different concentrations (0−500 μg L−1) was investigated for 11 days. A significant (p < 0.05) increase in lipid content was observed with increasing Cr(VI) concentration. However, growth was suppressed at higher concentrations exceeding 100 μg L−1. Addition of Cr(VI) in the cell culture medium showed a negative effect on quantum yield (Fv/Fm), and a photosynthetic inhibition of >65% was noted in both species at 500 μg L−1. However, the lipid gravimetric analysis presented inner cell lipid content up to 36% and 30% of dry weight biomass for M. pulchellum and M. pusillum, respectively. The fatty acids profiles of both microalgae species showed higher levels of hexadecenoic acid as well as ω3... [more]

With the constant growth of requirements to the quality of infocommunication services, special attention is paid to the management of information transfer in wireless self-organizing networks. The clustering algorithm based on the Motley signal propagation model has been improved, resulting in cluster formation based on the criterion of shortest distance and maximum signal power value. It is shown that the use of the improved clustering algorithm compared to its classical version is more efficient for the route search process. Ant and simulated annealing algorithms are presented to perform route search in a wireless sensor network based on the value of the quality of service parameter. A comprehensive routing method based on finding the global extremum of an ordered random search with node addition/removal is proposed by using the presented ant and simulated annealing algorithms. It is shown that the integration of the proposed clustering and routing solutions can reduce the route sear... [more]

Industry testing procedures such as ANSI/API 13B-1 describe a method for measuring fluid loss and studying filter-cake formation against a medium of either a filter paper or a porous disc, without giving information about potential formation damage. Considering the thickness of the discs, it may also be possible to extend the method to gain an insight into aspects of formation damage. A new experimental set-up and methodology was created to evaluate changes to the porous discs after HTHP testing to generate insight into signs of formation damage, such as changes in disc mass and permeability. Such measurements were enabled by placing the disc in a cell, which allowed for reverse flow of fluid to lift off the filter-cake. Experiments were conducted with different drilling fluid compositions to evaluate the use of the new methodology. The first test series showed consistent changes in disc mass as a function of the additives applied into the fluid. The data yield insights into how the di... [more]

The pulp and paper industry faces an emerging challenge for valorising wastes and side-streams generated according to the biorefinery concept. Eucalyptus globulus bark, an abundant industrial residue in the Portuguese pulp and paper sector, has a high potential to be converted into biobased products instead of being burned. This work aimed to evaluate the ethanol production from E. globulus bark previously submitted to kraft pulping through separate hydrolysis and fermentation (SHF) configuration. Fed-batch enzymatic hydrolysis provided a concentrated hydrolysate with 161.6 g·L−1 of cellulosic sugars. S. cerevisiae and Ethanol Red® strains demonstrated a very good fermentation performance, despite a negligible xylose consumption. S. passalidarum, a yeast known for its capability to consume pentoses, was studied in a simultaneous co-culture with Ethanol Red®. However, bioethanol production was not improved. The best fermentation performance was achieved by Ethanol Red®, which provided a... [more]

For the resonance treatment of a very high temperature reactors (VHTR) fuel with the double heterogeneity, an extension of the pin-based pointwise energy slowing-down method (PSM) was developed and implemented into DeCART. The proposed method, PSM-double heterogeneity (DH), has an improved spherical unit cell model with an explicit tri-structural isotropic (TRISO) model, a matrix layer, and a moderator for reflecting the moderation effect. The moderator volume was analytically derived using the relation of the Dancoff factor and the mean chord length. In the first step, the pointwise homogenized cross-sections for the compact was obtained after solving the slowing down equation for the spherical unit cell. Then, the shielded cross-section for the homogenized fuel compact was generated using the original PSM. The verification calculations were performed for the fuel pins with various packing fractions, compact sizes, TRISO sizes, and fuel temperatures. Additionally, two fuel block probl... [more]

Deterministic channel models, such as the three-dimensional (3D) ray launching method, can yield wireless channel parameters. In the non-line-of-sight (NLOS) propagation, the outdoor 3D ray launching method that considers diffraction effects is more accurate than the one that does not. While considering the diffraction effect, obtaining the diffraction point is challenging. This paper proposed a method for determining diffracted rays using the receiving sphere method in 3D ray launching. The diffraction point is determined using the shortest distance method between two straight lines, and the signal loss from the transmitting to receiving antennas is obtained. Furthermore, experiments on a millimeter wave in a microcell scenario were performed. The test results of the wireless channel parameters were compared with theoretical calculations. The results obtained via the 3D ray launching method that only considers the specular reflection and direct rays agree with the experimental results... [more]

The combustion characteristics of laminar biogas premixed and diffusion flames in the presence of upward decreasing magnetic fields have been investigated in this study. The mechanism of magnet−flame interaction in the literature, in which magnetic fields change the behaviors of laminar flames due to the paramagnetic and diamagnetic properties of the constituent gases, is examined and the results are as follows. The magnetic field has no noticeable effect on premixed flames due to low oxygen concentration of the mixed gas at the injection and the relatively high flow momentum. However, due to the diffusion nature of diffusion flames and paramagnetic property of oxygen in ambient air, oxygen distributions are subjected to the gradient of magnetic flux, thus shortening the height of diffusion flames. Results also show that the flame volume is more strongly varied than flame height. Altered oxygen distributions result in improved combustion and higher flame temperature. In the case of cur... [more]

This study provides insights into the initial and post-adoption of cloud computing services by integrating information technology adoption, social influence, trust, security, and information systems quality theories. Social influence, hedonicity, and automaticity are hedonic predictors of user satisfaction with cloud computing services. Perceived risks, trust in the provider, and system quality are utilitarian predictors of user satisfaction with cloud computing services. The Partial Least Squares (PLS) was employed to test eight hypotheses on the causal relationships between the variables. Six out of eight hypotheses were supported. Hedonic factors appear to have more influence than the utilitarian factor of increasing user satisfaction with cloud computing services in the school setting. The findings lead to both theoretical and practical implications for improving the initial and post-adoption of cloud computing services.

Worldwide, buildings have been presented as one of the main energy consumers and, for that matter, there is an increased tendency to invest in policies and measures that promote more efficient buildings. Among the chosen strategies, the need to promote the use of passive solutions and retrofit the existing building stock is often pointed out. Portuguese building stock has proven to be obsolete in terms of thermal comfort, which can directly affect the energy demand for climatization purposes. Considering the great solar availability in the country, when compared to other European locations, building retrofit with solar passive technologies can be a suitable solution. This paper aims to review studies on the application of solar passive technologies to retrofit façades in the Mediterranean climate context, with a special focus on Portugal. Four retrofit passive solar technologies were reviewed, namely glazing, sun shading, sunspaces and Trombe wall technologies.

The purpose of the article was to present information on heat recovery in ventilation systems and to highlight what has not been sufficiently researched in this regard. A lot of information can be found on methods and exchangers for heat recovery in centralized systems. Decentralized, façade systems for cyclical supply and exhaust air have not been sufficiently researched. It is known that these devices are sensitive to the influence of wind and temperature, hence heat recovery may be ineffective in their case. The literature describes the aspect of heat recovery depending on the location in climatic zones, depending on the number of degree days (HDD). Attention was also paid to the risk of freezing of heat recovery exchangers. The literature review also showed the lack of a universal method for assessing heat recovery exchangers and the method of their selection depending on the climate.

This study investigates the influence of oil price shocks on GDP per capita, exchange rate, and total trade turnover in Azerbaijan using the Structural Vector Autoregressive (SVAR) method to data collected from 1992 to 2019. The estimation results of the SVAR method conclude that oil price shocks (rise in oil prices) affect GDP per capita and total trade turnover positively, whereas its influence on the exchange rate is negative in the case of Azerbaijan. According to results of this study, Azerbaijan and similar oil-exporting countries should reduce the dependence of GDP per capita, the exchange rate, and total trade turnover from oil resources and its prices in the global market. Therefore, these countries should attempt to the diversification of GDP per capita, the exchange rate, and other sources of total trade turnover.

A flow−particle interaction solver was developed in this study. For the basic flow solver, an improved divergence-free-condition compensated coupled (IDFC2) framework was employed to predict the velocity and pressure field. In order to model the effect of solid particles, the differentially interpolated direct forcing immersed boundary (DIIB) method was incorporated with the IDFC2 framework, while the equation of motion was solved to predict the displacement, rotation and velocity of the particle. The hydrodynamic force and torque which appeared in the equations of motion were directly evaluated by fluid velocity and pressure, so as to eliminate the instability problem of the density ratio close to 1. In order to effectively evaluate the drag/lift forces acting on the particle, an interpolated kernel function was introduced. The present results will be compared with the benchmark solutions to validate the present flow−particle interaction solver.

Analyses were conducted on 10 grass species from permanent grasslands in the Noteć Leniwa and Noteć Bystra valley. Their chemical composition was assayed, and their heat of combustion and heating value were determined. The cellulose content ranged from 33.38% to 38.68%, while the content of lignin ranged from 15.42% to 21.99%, and that of hemicellulose from 30.27% to 34.31%. The heating value of grasses was comparable to that of wood from 2- to 3-year-old willows and other fast-growing energy crops. However, the calorific value of naturally dried grasses may be slightly lower. The quantities of minerals in these grasses, exceeding those in wood, did not result in a lowering of their heat of combustion. The analyses clearly showed that the investigated grass species may be successfully used for energy generation purposes.

In this article, the second method of determination of the theoretical and actual working volume of a hydraulic motor is described. The proposed new method is based on the characteristics of effective absorbency of the motor. The effective absorbency has been defined as the ratio of flow rate in a motor to the rotational speed of the motor’s shaft. It has been shown that the effective absorbency is a nonlinear function of the rotational speed and nonlinear function of the pressure drop in the motor’s working chambers. Furthermore, it has been proven that the actual working volume of a motor is a function of a third degree of pressure drop in the motor’s working chamber. The actual working volume should be taken to assess the mechanical and volumetric energy losses in the motor. Furthermore, the influence of the flowmeter location in the measurement system and the compressibility of liquid on the result of the theoretical and actual working volume calculation was also taken into account... [more]

Different types of classifiers for acoustic partial discharge (PD) pattern classification have been widely discussed in the literature. The classifier performance mainly depends on the measurement conditions (location and type of the PD, acoustic sensor position and frequency response) as well as extracted features. Recent research posits that features extracted by singular value decomposition (SVD) can exhibit the natural characteristics and energy contained in the signal. Though the technique by itself is not novel, in this paper, SVD is employed for PD classification in a revised way starting from data arrangement in Hankel form, to embedding the hypergraph-based features and finally to extracting the required set of optimal features. The algorithm is tested for various measurement conditions that include the influences of various PD locations and oil temperatures. The robustness of the algorithm is also tested using noisy PD signals. Experimental results show the proposed feature e... [more]

The paper focuses on the influence of the reshaped elbow geometry of the draft tube on the unsteady pressure field under different operating conditions. The experimental investigations are conducted considering two simplified geometrical configurations of the draft tubes with sharp heel elbow and modified/reshaped elbow, respectively. The discriminated power spectra (rotating and plunging components) of the acquired pressure signals on the wall are determined on five levels for seven operating conditions to quantify the influence of the reshaped elbow. The influence of the reshaped elbow on the fundamental frequencies of both rotating and plunging components and on the amplitude of the rotating component is negligible. In contrast, the equivalent amplitude associated with the root mean square of the plunging power spectrum that propagates along the hydraulic passage is mitigated up to 25% by the reshaped geometry of the elbow. The equivalent amplitude on the narrow band around the fund... [more]

This paper presents the skin effect impact on the active power losses in the sheathless single-core cables/wires supplying nonlinear loads. There are significant conductor losses when the current has a distorted waveform (e.g., the current supplying diode rectifiers). The authors present a new method for active power loss calculation. The obtained results have been compared to the IEC-60287-1-1:2006 + A1:2014 standard method and the method based on the Bessel function. For all methods, the active power loss results were convergent for small-cable cross-section areas. The proposed method gives smaller power loss values for these cable sizes than the IEC and Bessel function methods. For cable cross-section areas greater than 185 mm2, the obtained results were better than those for the other methods. There were also analyses of extra power losses for distorted currents compared to an ideal 50 Hz sine wave for all methods. The new method is based on the current penetration depth factor cal... [more]

In this study, changes in the droplet formation mechanism and the law of droplet length in a two-phase liquid−liquid system in 400 × 400 μm standard T-junction microchannels were experimentally studied using a high-speed camera. The study investigated the effects of various dispersed phase viscosities, various continuous phase viscosities, and two-phase flow parameters on droplet length. Two basic flow patterns were observed: slug flow dominated by the squeezing mechanism, and droplet flow dominated by the shear mechanism. The dispersed phase viscosity had almost no effect on droplet length. However, the droplet length decreased with increasing continuous phase viscosity, increasing volume flow rate in the continuous phase, and the continuous-phase capillary number Cac. Droplet length also increased with increasing volume flow rate in the dispersed phase and with the volume flow rate ratio. Based on the droplet formation mechanism, a scaling law governing slug and droplet length was pr... [more]

Carbon emission reduction is now a global issue, and the prediction of carbon trading market prices is an important means of reducing emissions. This paper innovatively proposes a second decomposition carbon price prediction model based on the nuclear extreme learning machine optimized by the Sparrow search algorithm and considers the structural and nonstructural influencing factors in the model. Firstly, empirical mode decomposition (EMD) is used to decompose the carbon price data and variational mode decomposition (VMD) is used to decompose Intrinsic Mode Function 1 (IMF1), and the decomposition of carbon prices is used as part of the input of the prediction model. Then, a maximum correlation minimum redundancy algorithm (mRMR) is used to preprocess the structural and nonstructural factors as another part of the input of the prediction model. After the Sparrow search algorithm (SSA) optimizes the relevant parameters of Extreme Learning Machine with Kernel (KELM), the model is used fo... [more]

A process for obtaining ethyl levulinate through the direct esterification of levulinic acid and ethanol using AlCl3·6H2O as a catalyst was investigated. AlCl3·6H2O was very active in promoting the reaction and, the correspondent kinetic and thermodynamic data were determined. The reaction followed a homogeneous second-order reversible reaction model: in the temperature range of 318−348 K, Ea was 56.3 kJ·K−1·mol−1, whereas Keq was in the field 2.37−3.31. The activity of AlCl3·6H2O was comparable to that of conventional mineral acids. Besides, AlCl3·6H2O also induced a separation of phases in which ethyl levulinate resulted mainly (>98 wt%) dissolved into the organic upper layer, well separated by most of the co-formed water, which decanted in the bottom. The catalyst resulted wholly dissolved into the aqueous phase (>95 wt%), allowing at the end of a reaction cycle, complete recovery, and possible reuse for several runs. With the increase of the AlCl3·6H2O content (from 1 to 5 mol%), t... [more]

Accurate and timely macro forecasting requires new and powerful predictors. Carbon emissions data with high trading frequency and short releasing lag could play such a role under the framework of mixed data sampling regression techniques. This paper explores the China case in this regard. We find that our multiple autoregressive distributed lag model with mixed data sampling method setup outperforms either the auto-regressive or autoregressive distributed lag benchmark in both in-sample and out-of-sample nowcasting for not only the monthly changes of the purchasing managers’ index in China but also the Chinese quarterly GDP growth. Moreover, it is demonstrated that such capability operates better in nowcasting than h-step ahead forecasting, and remains prominent even after we account for commonly-used macroeconomic predictive factors. The underlying mechanism lies in the critical connection between the demand for carbon emission in excess of the expected quota and the production expans... [more]

Technological innovations in sociotechnical transitions are usually found in market or spatial niches. These novel niches may sometimes emerge and expand, and eventually may erode an established sociotechnical system regime. In this paper, we redefined niche emergence as potentially consequent from the convergence of different regimes. That is, it is proposed that innovative niches may be grounded in established regimes but subsequently expand or bridge to previously distinct and separate other sociotechnical system regimes. However, the extension of overlapping regimes creates new forms of “external” competition for industrial participants inside each regime. This paper therefore proposes that regime−regime confluence may be observed in (1) the boundaries between regimes potentially being broken via emergent new niches; (2) pre-existing local networks being fragmented and reformed into exclusive and/or wider networks; and (3) competitive challenges and pressures arising both from insi... [more]

Various kinds of pilot burners were experimentally investigated to examine the effects of their geometry and their location relative to the main burner of a real size combustor. In addition, a wide range of fuel equivalence ratios were investigated to analyze the feasibility of the novel pilot burner for the conventional burner application. From the results, it is shown that the novel pilot burner with multi air holes had a thin, straight, long and stable pilot flame, while the conventional pilot burner had a thick, lifted, short and unstable flame. It is also shown that the novel pilot burner with an upper air flow hole had a straight pilot flame which led to less thermal damage to the burner combustor. This study suggests that not only pilot burner flame shape but also the vertical location of the pilot burner from the main burner combustor has a significant effect on combustor durability.