Hydrostatic transmissions are commonly used in heavy-duty equipment for their design flexibility and superior power density. Compared to a conventional wind turbine transmission, a hydrostatic transmission (HST) is a lighter, more reliable, cheaper, continuously variable alternative for a wind turbine. In this paper, for the first time, a validated dynamical model and controlled experiment have been used to analyze the performance of a hydrostatic transmission with a fixed-displacement pump and a variable-displacement motor for community wind turbines. From the dynamics of the HST, a pressure control strategy is designed to maximize the power capture. A hardware-in-the-loop simulation is developed to experimentally validate the performance and efficiency of the HST drive train control in a 60 kW virtual wind turbine environment. The HST turbine is extensively evaluated under steady and time-varying wind on a state-of-the-art power regenerative hydrostatic dynamometer. The proposed cont... [more]

The main aim of this article was to test the authors’ proprietary method (i.e., the conversion method applied to evaluate e-banking services that support sustainable development goals in households, communities, and society). The authors’ conversion method can be applied with the aim of maintaining a balance between households, producers, and public administration services in line with the principles of sustainable development of the information society in Poland. To achieve this goal, the authors identified the differences between the results obtained using the conversion method and the results produced by other methods such as TOPSIS, Promethee II, and PROSA involving the same group of respondents. A hypothesis was made about the existence of significant differences in the results obtained as part of the studies. The research was carried out on a sample of nearly 830 ratings concerning the 27 most popular electronic banks in Poland. As part of the survey, the respondents assessed 18... [more]

Throughout the world, and especially in the European Union, numerous technologies for the thermal treatment of radioactive waste are available or being developed. These technologies can be applied to a large range of different radioactive waste streams, including non-standard types of waste that present specific waste management challenges. Thermal treatment can result in a significant reduction in volume and hazard, which are beneficial for safe storage and disposal. Thermal treatment also removes organic material that can form complexing agents and increase the mobility of radionuclides in the landfill. In the paper, basic thermal techniques are presented, and some examples of the installations are shown. Common knowledge of these methods may result in an increased public acceptance of nuclear energy in a country just introducing it, as Poland is.

This effort to make the power grid more intelligent is tightly coupled with the deployment of advanced metering infrastructure (AMI) as an integral part of the future vision of smart grid. The goal of AMI is to provide necessary information for the consumers and utilities to accurately monitor and manage energy consumption and pricing in real time. Immediate benefits are enhanced transparency and efficiency of energy usage and the improvement of customer services. Although the road map toward successful AMI deployment is clearly defined, many challenges and issues are to be solved regarding the design of AMI. In this paper, a multi-agent AMI based on the fog-computing approach is presented. Architecture follows structural decomposition of AMI functionalities encapsulated in a form of local and area-specific service components that reside at the different tiers of hierarchically organized AMI deployment. Fog computing concepts provide the framework to effectively solve the problems of c... [more]

This work aims to study the impact of nanofluids with alumina particles on pool boiling performance. Unlike most studies, which use a trial-and-error approach to improve boiling performance parameters, this study details the possible effects of nanoparticles on the effective mechanisms of boiling and heat transfer. For this purpose, biphilic surfaces (hydrophilic surfaces with superhydrophobic spots) were used, which allow the individual analysis of bubbles. Surfaces with different configurations of superhydrophobic regions were used. The thermophysical properties of fluids only vary slightly with increasing nanoparticle concentration. The evolution of the dissipated heat flux and temperature profiles for a nucleation time frame is independent of the fluid and imposed heat flux. It can be concluded that the optimal concentration of nanoparticles is 3 wt%. Using this nanoparticle concentration leads to lower surface temperature values than those obtained with water, the reference fluid.... [more]

Preheating is often required to prevent hydrate formation during the pressure reduction process in a natural gas distribution network’s pressure reduction station. This paper examines an energy recovery method to avoid the cost and energy consumption of this preheating. The primary aim is to assess the techno-economic feasibility of an energy recovery system based on the Ranque−Hilsch vortex tube coupled to a heat exchanger for large-scale application to the gas grid. To this end, a techno-economic model of the entire energy recovery system was included in an optimisation procedure. The resulting design minimises the payback period (PP) when the system is applied to the pressure reduction stations belonging to a particular gas grid. The pressure reduction stations always operate at an outlet pressure above atmospheric pressure. However, available performance models for the Ranque−Hilsch vortex tube do not permit prediction at backpressure operation. Therefore, a novel empirical model o... [more]

The effectiveness of using wetted cellulose pads on improving the performance of two conventional passive cooling systems has been evaluated. First, an experimental design was developed to determine the impact of using a wetted cellulose pad on the temperature and velocity of the airflow. A cellulose pad (7090 model) with a cross-sectional area of 0.5 × 0.5 m2 and three different thicknesses of 10, 15, and 30 cm were selected and tested. The results indicated that using wetted cellulose pads with thicknesses ranging from 10−30 cm decreased the outlet airflow temperature from 11.3 to 13.7 °C on average. For free airflow at velocity 3.5 m/s, the outlet airflow velocity from the wetted cellulose pad decreased to 0.9, 0.7 and 0.6 m/s, respectively, for cellulose pads with thicknesses of 10, 15, and 30 cm. By applying experimental results on a psychrometric chart, the humidity ratio of outlet airflow was obtained between 40−70%. The study established airflow velocity as the critical paramet... [more]

Due to a high risk of power outages, a heat-driven adsorption chillers are gaining the attention. To increase the efficiency of the chiller, new adsorbents must be produced and examined. In this study, four newly developed silica−based porous materials were tested and compared with silica gel, an adsorber commonly paired with water. Extended sorption tests using mercury intrusion porosimetry, gas adsorption, and dynamic vapor sorption were performed. The morphology of the samples was determined using a scanning electron microscope. The thermal properties were defined using simultaneous thermal analysis and a laser flash method. Metal organic silica (MOS) nanocomposites analysed in this study had thermal properties similar to those of commonly used silica gel. MOS samples have a thermal diffusivity coefficient in the range of 0.17−0.25 mm2/s, whereas silica gel of about 0.2 mm2/s. The highest water adsorption capacity was measured for AFSMo-Cu and equal to 33−35%. For narrow porous sili... [more]

Automated hydronic balancing in space heating systems is crucial for the fourth-generation district heating transition. The current manual balancing requires labor- and time-consuming activities. This article presents the field results of an innovative electronic radiator thermostat tested on two Danish multi-family buildings. The prototypes had an additional return temperature sensor on each radiator and an algorithm was used to accurately control valve opening to ensure automated hydronic balancing. The results highlighted that the new thermostat performed as expected and helped secure the cooling of district heating temperatures —defined as the difference between supply and return temperature—4−12 °C higher during the test compared to results obtained in 2020, when the prototypes were replaced with state-of-the-art thermostats in the first building. The measurements from the other building illustrated how only two uncontrolled radiators out of 175 could contaminate the overall retur... [more]

In this article, the problem of modeling a time series using the Minimax method is considered. The expediency of using Minimax to identify points of change in trends and the range of changes in the graphical figures of technical analysis is justified. Spline approximation of the dynamic process with range constraints was performed to improve the quality of the model. Investors are advised to refrain from making hasty decisions in favor of holding reliable shares (such as PJSC Novatek shares), rather than selling them. The purchase of new shares should be carefully analyzed. Through an approximation of the dynamic number of the applicable optimization problem of minimizing the maximum Hausdorff distances between the ranges of the dynamic series and the values of the approximating function, the applied approach can provide reliable justification for signals to buy shares. Energy policy occupies the highest place in the list of progress ratings according to news analytics of businesses re... [more]

In the present study, the protein-extracted grass residue (press cake) was processed through hydrothermal liquefaction under sub and supercritical temperatures (300, 350 and 400 °C) with and without using a potassium carbonate catalyst. The results revealed that bio-crude yield was influenced by both temperature and the catalyst. The catalyst was found to be effective at 350 °C (350 Cat) for enhancing the bio-crude yield, whereas supercritical state in both catalytic and non-catalytic conditions improved the quality of bio-crude with reasonable HHVs (33 to 36 MJ/kg). The thermal behaviour of bio-crude was analysed and higher volatile contents (more than 50% under the range of 350 °C) were found at supercritical conditions. The overall TOC values in the residual aqueous phase varied from 22 to 38 g/L. Higher carbon loss was noticed in the aqueous phase in supercritical conditions. Furthermore, GCMS analysis showed ketones, acids and ester, aromatics and hydrocarbon with negligible nitro... [more]

The smart transformer has been widely applied for the integration of renewables and loads. For the smart transformer application, the voltage control of low-voltage inverter is important for feeding the load. In this paper, a multi-objective optimization control design approach which comprehensively considers all aspects of indexes, such as linear quadratic (LQ) index, H∞ norm, and closed-loop poles placement, is proposed based on the linear matrix inequality (LMI) solution. The proposed approach is able to alleviate the weight of the designer from the tedious design process of the multiple resonant controllers and the selection of the weighting matrix for the LQ control. Besides that, some excellent performances such as fast recovering time, low total harmonic distortion (THD) and high robustness are achieved by the proposed approach. The THD are 0.5% and 1.7% for linear and non-linear loads, respectively. The voltage drop for linear load step is reduced to 10 V. The proposed approach... [more]

Energy consumption for heating of single-family residential buildings is a basic item in energy balance and significantly affects their operating costs. Accuracy of heat consumption assessment in existing buildings to a large extent determines the decision on taking actions aimed at heat consumption rationalization, both at the level of a single building and at regional or national level. In the case of energy calculations for the existing buildings, a problem often arises in the form of lack of complete architectural and construction documentation of the analyzed objects. Therefore, there is a need to search for methods that will be suitable for rapid energy analysis in existing buildings. These methods should give satisfactory results in predicting energy consumption when there is limited access to data characterizing the building. Therefore, the aim of this study was to check the usefulness of a model based on thermal characteristics for estimating energy consumption for heating in... [more]

Electric, hybrid, and fuel cell vehicles are the future of the automobile industry, and power source design is one of the most crucial steps in designing these vehicles. This paper aims to design and structurally simulate a custom accumulator—which powers an electric vehicle, for a lightweight, single-seater formula-style racecar. The work is dependent on the model-based design and CAD model approach. Mathematical modeling on SCILAB is used to model equations to get the characteristics of the accumulator, such as the energy, capacity, current, voltage, state of charge, and discharge rates. The output of this model gives the configuration of the battery pack as several cells in series and parallel to adequately power the tractive system. An accumulator container is designed to safeguard the cells from external impacts and vibrational loads, which otherwise can lead to safety hazards. Following this, the Finite Element Analysis (FEA) performed on the accumulator resulted in maximum peak... [more]

In this article, a recent modified meta-heuristic optimizer named the modified hunger games search optimizer (MHGS) is developed to determine the optimal parameters of a fractional-order proportional integral derivative (FOPID) based load frequency controller (LFC). As an interconnected system’s operation requires maintaining the tie-line power and frequency at their described values without permitting deviations in them, an enhanced optimizer is developed to identify the controllers’ parameters efficiently and rapidly. Therefore, the non-uniform mutation operator is proposed to strengthen the diversity of the solutions and discover the search landscape of the basic hunger games search optimizer (HGS), aiming to provide a reliable approach. The considered fitness function is the integral time absolute error (ITAE) comprising the deviations in tie-line power and frequencies. The analysis is implemented in two networks: the 1st network comprises a photovoltaic (PV) plant connected to the... [more]

This state of the art review paper aims to discuss the results of a literature survey on possible ways to reinforce printed concrete based on existing reinforcement strategies. Just as conventional concrete, for 3D printed concrete to be suitable for large-scale construction, reinforcement is needed to increase the tensile capacity of concrete members and reduce temperature and shrinkage cracking. Despite efforts that are currently underway, the development of proper reinforcement suitable for printed concrete is still very active on the research agenda. As an initial step for designing suitable reinforcement for printed concrete, the existing reinforcement methods for printed concrete as well as conventional cast concrete from the literature are reviewed and summarized. Through the preliminary evaluation of the suitability and effectiveness of various reinforcement methods, guidelines are proposed to better understand possible solutions to reinforce printed concrete and inspire new pr... [more]

Currently, gas chromatography is the most common analytical technique for natural gas (NG) analysis as it offers very precise results, with very low limits of detection and quantification. However, it has several drawbacks, such as low turnaround times and high cost per analysis, as well as difficulties for on-line implementation. With NG applications rising, mostly thanks to its reduced gaseous emissions in comparison with other fossil fuels, the necessity for more versatile, fast, and economic analytical methods has augmented. This work summarizes the latest advances to determine the composition and physico-chemical properties of regasified liquid natural gas, focusing on infrared spectroscopy-based techniques, as well as on data processing (chemometric techniques), necessary to obtain adequate predictions of NG properties.

This article describes a practical method for predicting the distribution of electric potential inside an electrical machine’s winding based on design data. It broadens the understanding of winding impedance in terms of inter-winding behavior and allows to properly design an electrical machine’s insulation system during the development phase. The predictions are made based on an frequency-dependent equivalent circuit of the electrical machine which is validated by measurements in the time domain and the frequency domain. Element parameters for the equivalent circuit are derived from two-dimensional field simulations. The results demonstrate a non-uniform potential distribution and demonstrate that the potential difference between individual turns and between turns and the stator core exceeds the expected values. The findings also show a link between winding impedance and potential oscillations inside the winding. Additionally, the article provides an overview of the chronological progr... [more]

This article presents the impact of climate change on air treatment processes and energy demand in a selected air-conditioning system. The analysis was performed for a system supplying rooms with pre-treated primary air. Further treatment occurred directly in the rooms with individual devices such as fan coils or chilled beams. The analysis of the second stage of air treatment was not part of this study. The calculations were made for the city of Warsaw, where, according to the climate analysis for the period 1961−2020, an increase in outside temperature by 0.4 °C per decade and an increase in air humidity by 0.2 g/kg per decade were observed. The system analysis was divided into two stages. The first, including calculations made for monthly average climate data for the entire period of 1961−2020, shows changes in the energy demand of the system, resulting from progressive climate change. This analysis confirmed the general tendency of increasing demand for cooling energy and decreasin... [more]

One of the currently promoted methods of counteracting climate change is nature-based climate solutions, which harness the power of nature to reduce greenhouse gas emissions. Sustainable management of ecosystems is a guarantee for sustained human well-being. This underestimated, but extremely efficient and cheap method of integrating nature resources into the urban fabric is an economic “injection” for communal authorities. These “green” benefits should be standard in land-use planning in the era of anthropocentrism. Solutions based on nature were the reason for investigating their perception by Polish municipalities. The survey covered the entire country (all 2477 municipalities) from 20 July to 31 August 2021 through an electronic survey, obtaining 2128 responses (85.9% return rate). In the final result, data were obtained that support the hypotheses posed in the study. The main objective of the research was to check the level of activity of municipalities in Poland in the field of p... [more]

This article approaches the issue of the optimal control of a hypothetical anti-tank guided missile (ATGM) with an innovative rocket engine thrust vectorization system. This is a highly non-linear dynamic system; therefore, the linearization of such a mathematical model requires numerous simplifications. For this reason, the application of a classic linear-quadratic regulator (LQR) for controlling such a flying object introduces significant errors, and such a model would diverge significantly from the actual object. This research paper proposes a modified linear-quadratic regulator, which analyzes state and control matrices in flight. The state matrix is replaced by a Jacobian determinant. The ATGM autopilot, through the LQR method, determines the signals that control the control surface deflection angles and the thrust vector via calculated Jacobians. This article supplements and develops the topics addressed in the authors’ previous work. Its added value includes the introduction of... [more]

The body of literature on climate change impacts on building energy consumption is rising, driven by the urgency to implement adaptation measures. Nevertheless, the multitude of prediction methodologies, future scenarios, as well as climate zones investigated, results in a wide range of expected changes. For these reasons, the present review aims to map climate change impacts on building energy consumption from a quantitative perspective and to identify potential relationships between energy variation and a series of variables that could affect them, including heating and cooling degree-days (HDDs and CDDs), reference period, future time slices and IPCC emission scenarios, by means of statistical techniques. In addition, an overview of the main characteristics of the studies related to locations investigated, building types and methodological approaches are given. To sum up, global warming leads to: (i) decrease in heating consumptions; (ii) increase in cooling consumption; (iii) growt... [more]

Activated carbons (AC) from lignocellulosic biomass feedstocks are used in a broad range of applications, especially for electrochemical devices such as supercapacitor electrodes. Limited studies of environmental and economic impacts for AC supercapacitor production have been conducted. Thus, this paper evaluated the environmental and economic impacts of AC produced from lignocellulosic biomass for energy-storage purposes. The life cycle assessment (LCA) was employed to quantify the potential environmental impacts associated with AC production via the proposed processes including feedstock establishment, harvest, transport, storage, and in-plant production. A techno-economic model was constructed to analyze the economic feasibility of AC production, which included the processes in the proposed technology, as well as the required facility installation and management. A base case, together with two alternative scenarios of KOH-reuse and steam processes for carbon activation, were evaluat... [more]

Interleaved converters use an increased number of power electronics switches; this may subsequently affect their reliability. However, this is an opportunity to develop fault-tolerant strategies to improve their reliability and to ensure continuity of service. This is why we herein propose, for the first time, a mathematical function to simultaneously model the healthy and faulty conditions of each switch, thus enabling a unique model of the system. This model is then used in an original fault-tolerant strategy based upon the peak current control with slope compensation. This method not only extends the stable range of the load variation but also ensures the stability in faulty conditions. Finally, the simulation results validate its effectiveness and confirm the theoretical analysis.

Surprisingly, little is known whether the net present value (NPV) used as a financial metric in budgeting and investment planning to analyse a projects’ profitability is universal. Meanwhile, the epochal green energy revolution ensuring carbon neutrality through green innovations requires enormous investments, and projects realised must ensure energy security. Therefore, there is a need to reanalyse financial metrics used in financial planning, including NPV. We eliminate this research gap and, based on data from Poland, Romania, Hungary, Croatia, the USA, the United Kingdom, Japan, Israel, and Euro Zone, explain why one may not perceive the currently used NPV formula as a universal financial metric. We show that the variable discount rate influences the time value of money. Therefore, there is a need to redefine the NPV formula. This study makes two main contributions. First, it creates new ground by revisiting the NPV formula in the emerging market context compared to stable economie... [more]