A buck-type light-emitting diode (LED) driver is proposed herein. The proposed LED driver automatically possesses current sharing and high step-down voltage gain. Without complex control, the proposed LED driver, with a single input and multiple outputs, can achieve automatic current sharing of four-channel LED strings, even under the different number of LEDs of each LED string. Furthermore, as compared with the traditional four-phase interleaved buck converter with a single input and a single output having current sharing required, the proposed circuit has the duty cycle up to 0.5, not 0.25, meaning that under the same input voltage the latter has a wider output voltage range than that of the former. Above all, if the proposed circuit with N outputs, then it still has the duty cycle up to 0.5, not one over N as shown traditionally. Moreover, as compared with the current sharing based on the differential-mode transformer, the proposed circuit has no magnetic resetting loop required. In... [more]

The achievement of climate neutrality in the European Union by 2050 will not be possible solely through a reduction in fossil fuels and the development of energy generation from renewable sources. Large-scale implementation of various technologies is necessary, including bioenergy with carbon capture and storage (BECCS), carbon capture and storage (CCS), and carbon capture and utilisation (CCU), as well as industrial electrification, the use of hydrogen, the expansion of electromobility, low-emission agricultural practices, and afforestation. This research is devoted to an analysis of BECCS as a negative emissions technology (NET) and the assessment of its implementation impact upon the possibility of achieving climate neutrality in the EU. The modelling approach utilises tools developed within the LIFE Climate CAKE PL project and includes the MEESA energy model and the d-PLACE CGE economic model. This article identifies the scope of the required investment in generation capacity and t... [more]

Methods to assess wood-based bioenergy projects have tended to focus on technological and physical constraints. Less is known about how longer-term environmental, economic, and social systems—the three pillars of sustainable development—have influenced technological development in the context of woody biomass energy. This research offers new methods for assessing the sustainability of wood-based energy projects by combining spatial analysis, semi-structured interviews, and archival data analysis. By integrating quantitative and qualitative methods, this project offers ways to understand how social and environmental dynamics from the past shape technological development in the future. A propensity analysis of biomass energy plants in Michigan, USA was performed using US Census data grouped by social, economic, and environmental categories. This quantitative analysis helped to characterize community and landscape types in which woody biomass plants were developed in Michigan in the late-... [more]

The health of the hydroelectric generator determines the safe, stable, and reliable operation of the hydropower station. In order to keep the hydroelectric generator in a better state of health and avoid accidents, it is crucial to detect its faults. In recent years, fault detection methods based on sound and vibration signals have gradually become research hotspots due to their high sensitivity, achievable continuous dynamic monitoring, and easy adaptation to complex environments. Therefore, this paper is a supplement to the existing state monitoring and fault diagnosis system of the hydroelectric generator; it divides the hydroelectric generator into two significant parts: hydro-generator and hydro-turbine, and summarizes the research and application of fault detect technology based on sound signal vibration in hydroelectric generator and introduces some new technology developments in recent years, and puts forward the existing problems in the current research and future development... [more]

Migration is an important step in seismic data processing for oil and gas exploration. The accuracy of migration directly affects the accuracy of subsequent oil and gas reservoir characterization. Reverse-time migration is one of the most accurate migration methods at present. Multi-wave and multicomponent seismic data contain more P- and S-wave information. Making full use of multi-wave and multicomponent seismic data can offer more information about underground structure and lithology, as well as improve the accuracy of seismic exploration. Elastic reverse-time migration (ERTM) has no dip restriction and can be applied to image multi-wave and multicomponent seismic data in complex structural areas and some special lithology structures. However, the surface topography of complex regions has an influence on wavefield and seriously degrades the quality of ERTM’s migration results. We developed a new ERTM method to migrate multi-wave and multicomponent seismic data in the region with com... [more]

The transition from fossil fuels to renewable energy requires cooperation from all, including corporations, shareholders, and institutional investors. The purpose of this paper is to explore climate change litigation risks for Australian energy companies and investors from a policy and governance perspective. Companies are increasingly reporting their climate policies to satisfy their shareholders and investor demands. In addition, the government and judiciary are making laws and decisions to support the Paris Agreement. This paper explores whether company directors can and, in some cases, should be considering the impact of climate change litigation risks on their business, or else risk breaching their obligation to exercise care and diligence under the Corporation Act 2001 (Cth, Australia). The paper concludes that in addition to reducing climate change litigation risks, Australian energy companies and institutional investment bodies that invest in Australian energy companies can mak... [more]

This study focuses on optimizing a 100-W-class β-Type Stirling engine by combining the modified thermodynamic model and the variable-step simplified conjugate gradient (VSCGM) method. For the modified thermodynamic model, non-uniform pressure is directly introduced into the energy equation, so the indicated power and heat transfer rates can reach energy balance while the VSCGM is an updated version of the simplified conjugate gradient method (SCGM) with adaptive increments and step lengths to the optimization process; thus, it requires fewer iterations to reach the optimal solution than the SCGM. For the baseline case, the indicated power progressively raises from 88.2 to 210.2 W and the thermal efficiency increases from 34.8 to 46.4% before and after optimization, respectively. The study shows the VSCGM possesses robust property. All optimal results from the VSCGM are well-matched with those of the computational fluid dynamics (CFD) model. Heating temperature and rotation speed have p... [more]

Due to the strategic nature of the energy sector, legal solutions to protect cross-border electricity and gas connections will be of particular importance. The author realizes that at the present stage of development, the cross-border impact may also be manifested by generating units (e.g., wind farms) or even end users themselves. The lack of harmonized regulations in this area may not only lead to limitations in the physical supply of electricity and gas, but also affect future investment decisions regarding, for example, new generation capacities. In a broader aspect, it will delay, and in the extreme case prevent, the achievement of the objectives resulting from the EU energy policy, in particular integration within the single energy market. In this article, the author identifies devices and entities responsible for energy infrastructure that should be classified as necessary for the functioning of the single energy market. The research includes the analysis and evaluation of regul... [more]

As a result of environmental pollution and the ever-growing demand for energy, there has been a shift from conventional vehicles towards electric vehicles (EVs). Public acceptance of EVs and their large-scale deployment raises requires a fully operational charging infrastructure. Charging infrastructure planning is an intricate process involving various activities, such as charging station placement, charging demand prediction, and charging scheduling. This planning process involves interactions between power distribution and the road network. The advent of machine learning has made data-driven approaches a viable means for solving charging infrastructure planning problems. Consequently, researchers have started using machine learning techniques to solve the aforementioned problems associated with charging infrastructure planning. This work aims to provide a comprehensive review of the machine learning applications used to solve charging infrastructure planning problems. Furthermore, t... [more]

Electric vehicles may reduce greenhouse gas emissions from individual mobility. Due to the long charging times, accurate planning is necessary, for which the availability of charging infrastructure must be known. In this paper, we show how the occupation status of charging infrastructure can be predicted for the next day using machine learning models— Gradient Boosting Classifier and Random Forest Classifier. Since both are ensemble models, binary training data (occupied vs. available) can be used to provide a certainty measure for predictions. The prediction may be used to adapt prices in a high-load scenario, predict grid stress, or forecast available power for smart or bidirectional charging. The models were chosen based on an evaluation of 13 different, typically used machine learning models. We show that it is necessary to know past charging station usage in order to predict future usage. Other features such as traffic density or weather have a limited effect. We show that a Gradi... [more]

Deeply buried sandstones in the Jurassic, Toutunhe Formation, are a crucial exploration target in the Junggar Basin, NW China, whereas, reservoir-forming process of sandstones in the Toutunhe Formation remain unknown. Focused on the tight sandstone of the Toutunhe Formation, the impacts of diagenesis and hydrocarbon charging on sandstone reservoir-forming process were clarified based on the comprehensive analysis of sedimentary characteristics, petrography, petrophysical characteristics, and fluid inclusion analysis. Three diagenetic facies developed in the Toutunhe sandstone reservoirs, including carbonate cemented facies (CCF), matrix-caused tightly compacted facies (MTCF), and weakly diagenetic reformed facies (WDF). Except the WDF, the CCF and the MTCF entered the tight state in 18 Ma and 9 Ma, respectively. There was only one hydrocarbon emplacing event in sandstone reservoir of the Toutunhe Formation, charging in 13 Ma to 8 Ma. Meanwhile, the source rock started to expel hydrocar... [more]

This article is concerned with the numerical solution of nonlinear hyperbolic Schro¨dinger equations (NHSEs) via an efficient Haar wavelet collocation method (HWCM). The time derivative is approximated in the governing equations by the central difference scheme, while the space derivatives are replaced by finite Haar series, which transform it to full algebraic form. The experimental rate of convergence follows the theoretical statements of convergence and the conservation laws of energy and mass are also presented, which strengthens the proposed method to be convergent and conservative. The Haar wavelets based on numerical results for solitary wave shape of |φ| are discussed in detail. The proposed approach provides a fast convergent approximation to the NHSEs. The reliability and efficiency of the method are illustrated by computing the maximum error norm and the experimental rate of convergence for different problems. Comparisons are performed with various existing methods in re... [more]

Many empirical studies have tested the linkage among CO2 emissions, economic growth, and consumption of energy; however, most have not tested the possible influence of insurance market development on their frameworks. This research aims to provide new perspectives on the empirical literature by exploring the role of insurance market development on environmental degradation. The study utilizes a new technique of the bootstrap Autoregressive Distributed Lag (ARDL) test as introduced by (McNown et al., 2018). The ARDL testing approach is utilized to explore the short and long linkage between the examined variables. Furthermore, the research utilized the Granger causality to explore the of causality linkage among the selected variables. The findings illustrate that economic growth and consumption of nonrenewable energy have positive influence on CO2 emissions. Furthermore, the findings illustrate that the insurance market development has a positive influence on the levels of Turkey’s carbo... [more]

In this research, we studied the impact of temperature dependent viscosity and thermal radiation on Eyring Powell fluid with porous channels. The dimensionless equations were solved using the perturbation technique using the Weissenberg number (ε ≪ 1) to obtain clear formulas for the velocity field. All of the solutions for the physical parameters of the Reynolds number (Re), magnetic parameter (M), Darcy parameter (Da) and Prandtl number (Pr) were discussed through their different values. As shown in the plots the two-dimensional and three-dimensional graphical results of the velocity profile against various pertinent parameters have been illustrated with physical reasons. The results revealed that the temperature distribution increases for higher Prandtl and thermal radiation values. Such findings are beneficial in the field of engineering sciences.

An investigation on the heat transfer coefficient (HTC) of a heat pipe heat exchanger (HPHE) was carried out while being installed as a cooling mechanism on photovoltaic panels. The Ecohouse at the University of Technology and Applied Sciences in Muscat, Oman, was used as the case study. The experiment monitored the effect of temperature variations on PV-HPHE-induced power generation. The heat pipes were arranged in a double-sided condenser in a spanwise manner with spacing 50 mm in the center with an inclination angle of 3°. J-type thermocouples (exposed wire, polytetrafluoroethylene (PTFE) insulated) with a tip diameter of 1.5 mm were used. The results indicated mean values of HTC that were measured at 2.346 W/m2 K. The findings showed that the HTC values possessed a minimal standard error from the effect of variations of the ambient temperature. The mean HTC value of 2.346 W/m2 K can be used in the succeeding experiments using the same novel PV-HPHE setup. Additional... [more]

Energy storage (ES) only contributes to a single-scene (peak or frequency modulation (FM)) control of the power grid, resulting in low utilization rate and high economic cost. Herein, a coordinated control method of peak modulation and FM based on the state of ES under different time scales is proposed. Firstly, for monotone peak and FM control scenarios, the ES configuration and scheduling model is constructed with the goal of maximizing net profit. Secondly, to further improve the ES utilization rate and optimize the operating cost of ES, a cooperative control method of peak modulation and FM is proposed. This method can realize the switch between peak modulation and FM control of ES and improve the ES utilization rate and system economy. Finally, the simulation results show that, compared with that of mono-peak and single-FM control, the ES efficiency of the peak-FM multiscenario optimization scheduling method is improved by 16.25% and 37.29%, respectively. The annual net income is... [more]

An analysis of the influence of injection well location on CO2 storage efficiency was carried out for three well-known geological structures (traps) in deep aquifers of the Lower Jurassic Polish Lowlands. Geological models of the structures were used to simulate CO2 injection at fifty different injection well locations. A computer simulation showed that the dynamic CO2 storage capacity varies depending on the injection well location. It was found that the CO2 storage efficiency for structures with good reservoir properties increases with increasing distance of the injection well from the top of the structure and with increasing depth difference to the top of the structure. The opposite is true for a structure with poor reservoir properties. As the quality of the petrophysical reservoir parameters (porosity and permeability) improves, the location of the injection well becomes more important when assessing the CO2 storage efficiency. Maps of dynamic CO2 storage capacity and CO2 storage... [more]

As an energy-intensive industry sector, the glass industry is strongly affected by the increasingly stringent climate protection targets. [d=Rev2] As However, asestablished combustion-based production systems ensure high process stability and glass quality, an immediate switch to low greenhouse gas emission processes is [d=Rev2] difficulthighly challenging. To approach these challenges, this work investigates a step-by-step integration of a Power-to-Hydrogen concept into established oxyfuel glass melting processes using a simulation approach. This is complemented by a case study for economic analysis on a selected German glass industry site by simulating the power production of a nearby renewable energy park and subsequent optimization of the power-to-hydrogen plant performance and capacities. The results of this study [d=Rev2] indicateshow, that the proposed system can reduce specific carbon dioxide emissions by up to 60%, while increasing specific energy demand by a maximum of 25%. I... [more]

The expansion of Internet of Things (IoT) services and the huge amount of data generated by different sensors signify the importance of cloud computing services such as Storage as a Service more than ever. IoT traffic imposes such extra constraints on the cloud storage service as sensor data preprocessing capability and load-balancing between data centers and servers in each data center. Furthermore, service allocation should be allegiant to the quality of service (QoS). In the current work, an algorithm is proposed that addresses the QoS in storage service allocation. The proposed hybrid multi-objective water cycle and grey wolf optimizer (MWG) considers different QoS objectives (e.g., energy, processing time, transmission time, and load balancing) in both the fog and cloud Layers, which were not addressed altogether. The MATLAB script is used to simulate and implement our algorithms, and services of different servers, e.g., Amazon, Dropbox, Google Drive, etc., are considered. The MWG... [more]

Global economic growth, demographic explosion, digitization, increased mobility, and greater demand for heating and cooling due to climate change in different world areas are the main drivers for the surge in energy demand. The increase in energy demand is the basis of economic challenges for power companies alongside several socio-economic problems in communities, such as energy poverty, defined as the insufficient coverage of energy needs, especially in the residential sector. Two main strategies are considered to meet this increased demand. The first strategy focuses on new sustainable and eco-friendly modes of power generation, such as renewable energy resources and distributed energy resources. The second strategy is demand-side oriented rather than the supply side. Demand-side management, demand response (DR), and energy efficiency (EE) programs fall under this category. On the other hand, the decentralization and digitization of the energy sector convoyed by the emersion of new... [more]

This paper presents the method for evaluation of the turns ratio correction of the inductive current transformer using the magnetization curves determined at the non-load state and in the load conditions. The presented method may be applied to determine even a fractional winding correction factor. The standard IEC 61869-2 provides the method to determine the turns ratio correction of the tested CT from the measured rms values of voltages on its primary and secondary winding in the non-load state. However, this approach is limited in determining the significant changes in the number of turns of the secondary winding. Moreover, the paper presents the influence of the applied turns ratio correction on the frequency characteristics of the current error and phase displacement of the inductive current transformers evaluated for the transformation of the distorted current.

Due to the development of dedicated software and the computing capabilities of modern computers, the application of numerical methods to analyse more complex geotechnical problems is becoming increasingly common. However, there are still some areas which, due to the lack of unambiguous solutions, require a more thorough examination, e.g., the numerical simulations of displacement pile behaviour in soil. Difficulties in obtaining the convergence of simulations with the results of static load tests are mainly caused by problems with proper modelling of the pile installation process. Based on the numerical models developed so far, a new process of static load test modelling has been proposed, which includes the influence of pile installation on the soil in its vicinity and modelling of contact between steel pile and the soil. Although the presented method is not new, this is relevant and important for practitioners that may want to improve the design of displacement piles. The results of... [more]

The application of secondary NOx control methods in medium to low-capacity furnaces is a relatively new topic on the energy market and thus requires further research. In this paper, the results of full-scale research of SNCR and hybrid SNCR + SCR methods applied into a 29 MWth solid fuel fired stoker boiler is presented. The tests were performed for a full range of boiler loads, from 33% (12 MWth) to 103% (30 MWth) of nominal load. A novel SNCR + SCR hybrid process was demonstrated based on an enhanced in-furnace SNCR installation coupled with TiO2-WO3-V2O5 catalyst, which provides extra NOx reduction and works as an excess NH3 “catcher” as well. The performance of a brand-new catalyst was evaluated in comparison to a recovered one. The emission of NOx was reduced below 180 mg NOx/Nm3 at 6% O2, with ammonia slip in flue gas below 10 mg/Nm3. Special attention was paid to the analysis of ammonia slip in combustion products: flue gas and fly ash. An innovative and cost-effective method of... [more]

Natural gas is one of the main energy sources in Poland and accounts for about 15% of the primary energy consumed in the country. Poland covers only 1/5 of its demand from domestic deposits. The rest is imported from Russia, Germany, Norway, the Czech Republic, Ukraine, and Central Asia. An important issue concerning the market of energy resources is the question of the direct impact of the prices of energy resources on the income of exporting and importing countries. It should also be remembered that unexpected and large fluctuations are detrimental to both exporters and importers of primary fuels. The article analyzes natural gas deposits in Poland, raw material trade and proposes a model for forecasting the volume of its consumption, which takes into account historical consumption, prices of energy resources and assumptions of Poland’s energy policy until 2040. A hybrid model was built by combining ARIMA with LSTM artificial neural networks. The validity of the constructed model was... [more]

Heavy-duty trucks contribute approximately 20% of fuel consumption in the United States of America (USA). The fuel economy of heavy-duty vehicles (HDV) is affected by several real-world parameters like road parameters, driver behavior, weather conditions, and vehicle parameters, etc. Although modern vehicles comply with emissions regulations, potential malfunction of the engine, regular wear and tear, or other factors could affect vehicle performance. Predicting fuel consumption per trip based on dynamic on-road data can help the automotive industry to reduce the cost and time for on-road testing. Data modeling can easily help to diagnose the reason behind fuel consumption with a knowledge of input parameters. In this paper, an artificial neural network (ANN) was implemented to model fuel consumption in modern heavy-duty trucks for predicting the total and instantaneous fuel consumption of a trip based on very few key parameters, such as engine load (%), engine speed (rpm), and vehicle... [more]