Fossil fuel vehicles, emitting air toxics into the atmosphere, impose a heavy burden on the economy through additional health care expenses and ecological degradation. Air pollution is responsible for millions of deaths and chronic and acute health problems every year, such as asthma and chronic obstructive pulmonary disease. The fossil-fuel-based transportation system releases tons of toxic gases into the atmosphere putting human health at risk, especially in urban areas. This analysis aims to determine the economic burden of environmental and health impacts caused by Highway 401 traffic. Due to the high volume of vehicles driving on the Toronto Highway 401 corridor, there is an annual release of 3771 tonnes of carbon dioxide equivalent (CO2e). These emissions are mainly emitted onsite through the combustion of gasoline and diesel fuel. The integration of electric and hydrogen vehicles shows maximum reductions of 405−476 g CO2e per vehicle-kilometer. Besides these carbon dioxide emiss... [more]

In recent years Asian Nations showed concern over the Life Cycle Assessment (LCA) of their civil infrastructure. This study presents a contextual investigation of a residential apartment complex in the territory of the southern part of India. The LCA is performed through Building Information Modelling (BIM) software embedded with Environmental Product Declarations (EPDs) of materials utilized in construction, transportation of materials and operational energy use throughout the building lifecycle. The results of the study illustrate that cement is the material that most contributes to carbon emissions among the other materials looked at in this study. The operational stage contributed the highest amount of carbon emissions. This study emphasizes variation in the LCA results based on the selection of a combination of definite software-database combinations and manual-database computations used. For this, three LCA databases were adopted (GaBi database and ecoinvent databases through One... [more]

The United Nations Sustainable Goal 7, access to affordable and clean energy, is unlikely to be achieved, with an estimated 600 million people still without access to electricity by 2030. One potential route to support this goal is through the use of mini-grids to provide electricity in densely populated rural areas for which grid connection is not possible. This paper presents the results of a life cycle assessment of a mini-grid, designed for construction in Malawi. It analyses the cradle to end of use for this mini-grid configuration, for a grid sized for lighting, refrigeration and phone charging, and for a grid sized for electric cooking (e-cooking). The results suggest that for lighting configuration, the main contributors to environmental impact are the poles, the overhead cabling, and the PV panels. The use of a chromium-based preservative is the main issue for the poles, and a switch to concrete poles can deliver significant benefits. When the grid is sized for e-cooking, the... [more]

Understanding the influence of method choices on results in life-cycle assessments is essential to draw informed conclusions. As the climate impact of bioenergy remains a debated topic, the focus of this study is how the chosen temporal framing influences a comparison of the climate impact of utilizing residual biomass for biofuel production to that of leaving the biomass to decay. In order to compare the biofuel scenario to its corresponding reference scenario where biomass is left to decay, a variety of analytical approaches were used: using time-aggregated and time-dependent life-cycle inventories and climate-impact assessment methods, assuming biogenic carbon to be climate neutral or not, using metrics for cumulative or instantaneous climate impact, and with different time horizons. Two cases of residual biofuel feedstocks were assessed: logging residues from Norway spruce forest, and straw from wheat cultivation. Consideration of the studied method choices appears to be especially... [more]

Geo-resources are widely exploited in our society, with huge benefits for both economy and communities. Nevertheless, with benefits come risks and impacts. Understanding how such risks and impacts are intrinsically borne in a given project is of critical importance for both industry and society. In particular, it is crucial to distinguish between the specific impacts related to exploiting a given energy resource and those shared with the exploitation of other energy resources. A variety of different approaches can be used to identify and assess such risks and impacts. In particular, Life Cycle Assessment (LCA) and risk assessments (RAs) are the most commonly adopted. Although both are widely used to support decision making in environmental management, they are rarely used in combination perhaps because they have been developed by largely different groups of specialists. By analyzing the structure and the ratio of the two tools, we have developed an approach for combining and harmonizin... [more]

This paper presents an environmental impact assessment of the entire cycle of existence of the tube-vacuum solar collector prototype. The innovativeness of the solution involved using a phase change material as a heat-storing material, which was placed inside the collector’s tubes-vacuum. The PCM used in this study was paraffin. The system boundaries contained three phases: production, operation (use phase), and disposal. An ecological life cycle assessment was carried out using the SimaPro software. To compare the environmental impact of heat storage, the amount of heat generated for 15 years, starting from the beginning of a solar installation for preparing domestic hot water for a single-family residential building, was considered the functional unit. Assuming comparable production methods for individual elements of the ETC and waste management scenarios, the reduction in harmful effects on the environment by introducing a PCM that stores heat inside the ETC ranges from 17 to 24%. T... [more]

Extracting oil from spent coffee grounds (SCG) for biodiesel production has recently attracted much research interest. Large amounts of organic solvents are involved for oil extraction and biodiesel synthesis. Hydrothermal liquefaction (HTL) is an emerging thermochemical technology with great potential for biocrude production from a broad range of feedstocks. This study attempted to compare two SCG valorization options: route 1, oil extraction for biodiesel production followed by HTL of defatted SCG; and route 2, direct HTL of raw SCG. The microwave-assisted extraction conditions were optimized to effectively remove oil from SCG using response surface methodology. Under optimal conditions, an SCG oil yield of 8.4 wt.% could be achieved. HTL of defatted SCG generated less biocrude (18.9 wt.%) than that of raw SCG (28.1 wt.%). The biochemical compositions of resultant biocrudes were largely different from each other. The life cycle assessment was conducted on each of the SCG valorization... [more]

The energy efficiency of the construction sector should be determined by the cleanliness of the environment and, thus, the health of society. The scientific aim of this article was to develop a methodology for determining the optimum thickness of thermal insulation, taking into account both economic and ecological aspects and considering both heating and cooling costs. The method takes into account the number of degree days of the heating period, as well as the number of degree days of the cooling period. Variants in terms of different types of thermal insulation, various types of construction materials for building walls, climatic zones and heat sources, were taken into consideration. In order to find the optimum thicknesses of thermal insulation, both in economic and ecological terms, a metacriterion was used. The optimum thicknesses of thermal insulation with the use of the metacriterion were obtained in the range of 0.11−0.55 m. It was observed that the values of the optimum heat t... [more]

Heat production from a geothermal energy source is gaining increasing attention due to its potential contribution to the decarbonization of the European energy sector. Obtaining representative results of the environmental performances of geothermal systems and comparing them with other renewables is of utmost importance in order to ensure an effective energy transition as targeted by Europe. This work presents the outputs of a Life Cycle Assessment (LCA) performed on the Rittershoffen geothermal heat plant applying guidelines that were developed within the H2020 GEOENVI project. The production of 1 kWhth from the Rittershoffen heat plant was compared to the heat produced from natural gas in Europe. Geothermal heat production performed better than the average heat production in climate change and resource use, fossil categories. The LCA identified the electricity consumption during the operation and maintenance phase as a hot spot for several impact categories. A prospective scenario an... [more]

Life cycle assessment is an environmental method which estimates either a process or a building material within the cradle-to-grave cycle. Presently, it is one of a few tools that include all factors which may influence the environment. The authors used this tool to prove effects connected with potential efficient energy levels and a reduction in CO2 emissions within a building’s life cycle. For the purpose of our analyses, several types of single-family building were chosen and they were subjected to analysis in the fixed location of Warsaw. The research scope included a numerical analysis of the buildings concerning the level of embodied energies and the emission of greenhouse gases. The performed analysis proved that, within a 50-year cycle, the difference between the embodied energy from the best and worst building choices can amount to 14.87%, whereas a reduction in embodied carbon emissions can reach 20.65%. Each change in the building’s form and the type of building materials us... [more]

Life cycle assessment is an environmental method which estimates either a process or a building material within the cradle-to-grave cycle. Presently, it is one of a few tools that include all factors which may influence the environment. The authors used this tool to prove effects connected with potential efficient energy levels and a reduction in CO2 emissions within a building’s life cycle. For the purpose of our analyses, several types of single-family building were chosen and they were subjected to analysis in the fixed location of Warsaw. The research scope included a numerical analysis of the buildings concerning the level of embodied energies and the emission of greenhouse gases. The performed analysis proved that, within a 50-year cycle, the difference between the embodied energy from the best and worst building choices can amount to 14.87%, whereas a reduction in embodied carbon emissions can reach 20.65%. Each change in the building’s form and the type of building materials us... [more]

The assessment of life cycle greenhouse gas emissions of motor fuels is important due to the legal obligations and corporate social responsibility of the petroleum industry. Combining the Life-Cycle Assessment with optimization methods can provide valuable support in the decision-making process. In this paper, a mathematical model of a refinery was developed to analyze the impact of process optimization on GHG emissions at the fuel production stage. The model included ten major refinery units. Fuel production costs were minimized by taking into account the number of constraints. The analysis was performed in two steps. First, the model was run for the reference case of fuels composition. Then, more than twelve thousand model runs were performed. In each model, the fuel composition was changed. This change represented the exogenous pressures and resulted in different flows of mass, energy and GHG emission at the refinery. The most favorable results in terms of GHG emissions were then id... [more]

The refurbishment of the building stock is a key strategy towards the achievement of the climate and energy goals of the European Union. This study aims at evaluating the energy and environmental impacts associated with retrofitting a residential apartment to improve its vertical envelope thermal insulation. Two insulation materials, stone wool and cellulose fibers, are compared. The life cycle assessment methodology is applied assuming 1 m2 of retrofitted vertical envelope as functional unit. Moreover, to estimate the net energy and environmental benefits achievable in the retrofitted scenario compared with the non-retrofitted one, a second analysis is performed in which the system boundaries are expanded to include the building operational phase, and 1 m2 of walkable floor per year is assumed as reference. The results show that the use of cellulose fibers involve lower impacts in most of the assessed categories compared to stone wool, except for abiotic resource depletion. In detail,... [more]

Globally, 2.8 billion people still cook with biomass, resulting in health, environmental, and social challenges; electric cooking is a key option for a transition to modern energy cooking services. However, electric cooking is assumed to be too expensive, grids can be unreliable and the connection capacity of mini-grids and solar home systems is widely assumed to be insufficient. Developments in higher performance and lower cost batteries and solar photovoltaics can help, but they raise questions of affordability and environmental impacts. The range of issues is wide, and existing studies do not capture them coherently. A new suite of models is outlined that represents the technical, economic, human, and environmental benefits and impacts of delivering electric cooking services, with a life-cycle perspective. This paper represents the first time this diverse range of approaches has been brought together. The paper illustrates their use through combined application to case studies for t... [more]

LCA analysis with 16 impact categories was used for the comparison of two developed combustion technologies: Scenario I—the combustion of meat bone meal produced from all types of meat waste; Scenario II—the combustion of meat bones from the production of meat products. The key hotspots determined were electricity and natural gas consumption, covering as much as 98.2% of the total influence on the environment in Scenario I and 99.3% in Scenario II. Without taking into account the environmental burdens avoided, the LCA analysis showed that Scenario I was assessed to have 71.2% less environmental impact. The avoided burdens approach changed the relationship between the two scenarios. The absolute value score for the overall environmental impact shows that Scenario II can be more environmentally beneficial than Scenario I; however, Scenario I allowed the elimination of all types of Polish meat waste, and Scenario II could only be carried out in meat production units for the elimination of... [more]

For decades, among other industries, the construction sector has accounted for high energy consumption and emissions. As the energy crisis and climate change have become a growing concern, mitigating energy usage is a significant issue. The operational and end of life phases are all included in the building life cycle stages. Although the operation stage accounts for more energy consumption with higher carbon emissions, the embodied stage occurs in a time-intensive manner. In this paper, an attempt has been made to review the existing methods, aiming to lower the consumption of energy and carbon emission in the construction buildings through optimizing the construction processes, especially with the lean construction approach. First, the energy consumption and emissions for primary construction materials and processes are introduced. It is followed by a review of the structural optimization and lean techniques that seek to improve the construction processes. Then, the influence of thes... [more]

The building sector is responsible for 43% of France’s final energy consumption and is strongly associated with a high environmental impact due to its high consumption of energy and natural resources. These impacts are significant in isolated islands. Due to its geographical isolation and an area of 2512 km2, Reunion Island has a heavily carbon-based economy with a high import rate of raw materials for the building sector. This study aimed to investigate the effect of electricity mix decarbonization on residential house environmental impact. The methodology consists of three parts: (i) evaluating environmental impacts of Single-Family Houses (SFH) using life cyce assessment(LCA), (ii) defining SFH typologies using the K-means clustering algorithm, and (iii) implementing energy scenario in LCA of SFH to assess decarbonization effect. The environmental results were particularly sensitive in the operational phase, with a decrease of 83% between 2020 to 2040 of the global warming potential... [more]

An environmental life cycle assessment was conducted to compare proposed municipal solid waste treatment systems with the existing system in Visakhapatnam, India. Five waste alternative treatment systems, including open dumping of municipal solid waste (S1), landfill without gas recovery [LFWGR] (S2), landfill with gas recovery (S3), anaerobic digestion + LFWGR (S4), and incineration + LFWGR (S5). EASETECHTM was considered for assessment using ReCiPE Midpoint (Heuristic) world environmental impact assessment method. Global warming potential (GWP), terrestrial acidification (TA), freshwater eutrophication (FEW), marine water eutrophication (ME), human toxicity (HTP), terrestrial ecotoxicity (TE), freshwater ecotoxicity (FWT), and marine ecotoxicity (MET) impacts were determined for each option. The existing MSW disposal practice in Visakhapatnam city (baseline scenario, S1) has the highest GWP (1107 kg CO2 eq.), which can potentially be reduced to 68.2%, 81.5%, 98.2%, and 94.5% by alter... [more]

To meet climate change challenges, the UK government is aiming to reach zero emissions by 2050. The heavy-duty transportation sector contributes 17% to the UKs total emissions, so to combat this, alternative power units to traditional fossil fuel-reliant internal combustion engines (ICEs) are being utilized and investigated. Hydrogen fuel cells are a key area of interest to try and reduce these transportation emissions. To gain a true view of the impact that hydrogen fuel cells can have, this study looks at the impact the manufacturing of a fuel cell has upon the environment, from material extraction through to the usage phase. This was done through the use of a lifecycle assessment following ISO 14040 standards, with hydrogen systems being compared to alternative systems. This study has found that whilst fuel cells depend upon energy intensive materials for their construction, it is possible to reduce emissions by 34−87% compared to ICE systems, depending upon the source of hydrogen u... [more]

This research compares the potential environmental impacts of heat pumps with gas boilers and scenario analysis through utilising the life cycle approach. The study analyses the current situation with the baseline model and assesses future applications with Circular Economy (CE), Resource Efficiency (RE) and Limited Growth (LG) scenarios. Then, hybrid applications of low-carbon technologies and different manufacturing scenarios are investigated according to baseline and CE scenarios. Our results show that the use and manufacturing phases are responsible for 74% and 14% of all environmental impacts on average as expected. Even though the electricity mix of the UK has decarbonised substantially during the last decade, heat pumps still have higher lifetime impacts than gas boilers in all environmental categories except climate change impact. The carbon intensity of heat pumps is much lower than gas boilers with 0.111 and 0.097 kg CO2e for air source heat pumps and ground source heat pumps... [more]

So far, a lot of efforts have been put in life cycle assessments (LCA) of bioethanol production. There are many works that have assessed bioethanol production in different points of view to illustrate the environmental impacts. This study reviewed former LCA studies on bioethanol produced from various biomass resources by considering the effect of methodological components, technical pathways and feedstock provision on the result of LCA studies. The review evaluated 48 papers published 2002−2021 with a focus on studies that included a complete set of environmental impact categories. However, due to lack of harmony among studies, comparing the LCA results was challenging but the review indicated that the final results of studies are influenced by LCA methodological components, such as system boundary, functional unit, etc. Around 80% of the reviewed papers show the reduction in global warming potential, while contrary results have been found about increasing acidification, eutrophicatio... [more]

Using information from an experimental planting of non-toxic Jatropha curcas (NTJC) with minimal water and fertilization resources on rural marginal soil the objective of this article is to determine the sustainability of this raw material for producing biodiesel and the possibilities for improving it through life-cycle assessment (LCA). Three production scenarios were studied: minimal resources (MR), which focuses on the obtaining of biodiesel; minimal resources and utilization of sub-products (MRUS), which includes the utilization of the residual products in order to produce food and solid biofuels, as well as biodiesel; and utilization of biofertilizers, flood irrigation, and sub-products (UBIS), which incorporates the use of bio-fertilizers and irrigation in the production system. This study includes the selection of six sustainability indicators, as well as indicators by means of LCA methodology Finally, a sustainability index (SI) for each scenario was determined on the basis of... [more]

While the production costs and logistical benefits of biomass pelleting have been widely discussed in the literature, the downstream economic and environmental benefits of processing pelleted biomass have been largely neglected. To investigate those benefits, we performed a comparative techno-economic analysis and life cycle assessment of producing ethanol using loose and pelleted forms of biomass. Analyses of a 2000 metric tons (dry)/d biorefinery showed that using pelleted biomass is more economical than using loose or baled biomass. The lowest minimum ethanol selling price (MESP) for pelleted biomass was USD 0.58/gal less than the lowest MESP for loose biomass. Among all processing conditions analyzed, MESP for ethanol produced with pelleted biomass was always lower than when produced with loose biomass. Shorter pretreatment and hydrolysis times, higher pretreatment solids loadings, lower ammonia requirements, and reduced enzyme loadings were the primary factors contributing to lowe... [more]

Due to the continuous diurnal, seasonal, and annual changes in the German power supply, prospective dynamic emission factors are needed to determine greenhouse gas (GHG) emissions from hybrid and flexible electrification measures. For the calculation of average emission factors (AEF) and marginal emission factors (MEF), detailed electricity market data are required to represent electricity trading, energy storage, and the partial load behavior of the power plant park on a unit-by-unit, hourly basis. Using two normative scenarios up to 2050, different emission factors of electricity supply with regard to the degree of decarbonization of power production were developed in a linear optimization model through different GHG emission caps (Business-As-Usual, BAU: −74%; Climate-Action-Plan, CAP: −95%). The mean hourly German AEF drops to 182 gCO2eq/kWhel (2018: 468 gCO2eq/kWhel) in the BAU scenario by the year 2050 and even to 29 gCO2eq/kWhel in the CAP scenario with 3700 almost emission-free... [more]

Cellulosic biorefineries have attracted interest due to the growing energy security and environmental concerns related to fossil fuel-based energy and chemicals. Using pelleted biomass as a biorefinery feedstock can reduce their processing inputs while improving biomass handling and transportation. However, it is still questionable whether energy and emission savings from feedstock transportation and processing can justify pelletization. A life cycle assessment approach was used to compare energy consumption and greenhouse gas (GHG) emissions from pelleted and non-pelleted corn stover as a biorefinery feedstock. Operations considered were pelleting, transportation, and soaking in aqueous ammonia (SAA) pretreatment. Despite greater GHG emissions (up to 25 times higher than the transportation) generated from the pelleting process, the model showed a significant opportunity to offset and even reduce overall GHG emissions considering the pretreatment process benefits. Our process energy an... [more]