Biomass residues from permanent crops might be an alternative fuel for energy generation in a local market with limited transport distances. Moreover, as activities related to CO2 reduction are of special attention in the European Union (EU), sustainable use of resources plays an important role in climate change mitigation. In this paper, a life-cycle assessment (LCA) of the integrated value chain from peach pruning residues for electricity generation is presented and compared with the common practice including the mulching process of the pruned biomass in an orchard. It was shown that biomass harvesting, chipping and its delivery to a power plant—the Pruning-to-Energy (PtE) scenario—is feasible from an environmental point of view. The total global warming potential (GWP) of this value chain was 200 kg CO2 eq.·ha−1 (or 27 kg CO2 eq.·GJ−1). In turn, the mulching and leaving of the pruned biomass in an orchard—the pruning-to-soil (PtS) scenario—is characterized by a CO2 equivalent of 236... [more]

Biomass residues from permanent crops might be an alternative fuel for energy generation in a local market with limited transport distances. Moreover, as activities related to CO2 reduction are of special attention in the European Union (EU), sustainable use of resources plays an important role in climate change mitigation. In this paper, a life-cycle assessment (LCA) of the integrated value chain from peach pruning residues for electricity generation is presented and compared with the common practice including the mulching process of the pruned biomass in an orchard. It was shown that biomass harvesting, chipping and its delivery to a power plant—the Pruning-to-Energy (PtE) scenario—is feasible from an environmental point of view. The total global warming potential (GWP) of this value chain was 200 kg CO2 eq.·ha−1 (or 27 kg CO2 eq.·GJ−1). In turn, the mulching and leaving of the pruned biomass in an orchard—the pruning-to-soil (PtS) scenario—is characterized by a CO2 equivalent of 236... [more]

Italian power generation through anaerobic digestion (AD) has grown significantly between 2009 and 2016, becoming an important renewable energy resource for the country, also thanks to the generous incentives for produced electricity available in the last years. This work focuses on the economic and environmental issues of AD technology and proposes a techno-economic analysis of investment profitability without government support. In particular, the analysis focuses on an AD power plant fed by zootechnical wastewater and agro-industrial residues coupled to a cogeneration (CHP) system and a digestate-composting plant that produces soil fertilizers. We aim to determine the economic profitability of such AD power plants fed by inner-farm biomass wastes, exploiting digestate as fertilizer, using the cogenerated heat and taking into account the externalities (environmental benefits). Environmental analysis was carried out via a life cycle analysis (LCA), and encompassing the production of b... [more]

A “cradle-to-grave” life cycle assessment is performed to identify the environmental issues of polyhydroxyalkanoates (PHAs) produced through a hybrid thermochemical-biological process using anaerobically digested sewage sludge (ADSS) as feedstock. The assessment includes a measure of the energy performance of the process. The system boundary includes: (i) Sludge pyrolysis followed by volatile fatty acids (VFAs) production; (ii) PHAs-enriched biomass production using a mixed microbial culture (MMC); (iii) PHAs extraction with dimethyl carbonate; and iv) PHAs end-of-life. Three scenarios differing in the use of the syngas produced by both pyrolysis and biochar gasification, and two more scenarios differing only in the external energy sources were evaluated. Results show a trade-off between environmental impacts at global scale, such as climate change and resources depletion, and those having an effect at the local/regional scale, such as acidification, eutrophication, and toxicity. Proce... [more]

In accordance with European objectives, the Basilicata region intends to promote the use of energy systems and heat generators powered by lignocellulosic biomass, so the present study aimed to investigate the availability of logging residues and most suitable areas for the construction of bioenergy production plants. The life cycle assessment (LCA) methodology was employed to conduct an environmental impact assessment of the biomass distribution and its transport, and spatial LCA was used to evaluate the impact of regional transport. One cubic meter kilometer (m3 km−1) was used as the functional unit and a small lorry was considered for the transport. The results showed that the available harvesting residues amounted to 36,000 m3 and their loading environmental impact accounted for 349 mPt m−3. The impacts of transport (4.01 mPt m−3) ranged from 3.4 to 144,400 mPt km−1 forest parcel−1, mainly affecting human health (95%) and, second, the ecosystem quality (5%). Three possible sites for... [more]

Exergy is important and relevant in many areas of study such as Life Cycle Assessment (LCA), sustainability, energy systems, and the built environment. With the growing interest in the study of LCA due to the awareness of global environmental impacts, studies have been conducted on exergetic life cycle assessment for resource accounting. The aim of this paper is to review existing studies on exergetic life cycle assessment to investigate the state-of-the-art and identify the benefits and opportunity for improvement. The methodology used entailed an in-depth literature review, which involved an analysis of journal articles collected through a search of databases such as Web of Science Core Collection, Scopus, and Google Scholar. The selected articles were reviewed and analyzed, and the findings are presented in this paper. The following key conclusions were reached: (a) exergy-based methods provide an improved measure of sustainability, (b) there is an opportunity for a more comprehensi... [more]

Exergy is important and relevant in many areas of study such as Life Cycle Assessment (LCA), sustainability, energy systems, and the built environment. With the growing interest in the study of LCA due to the awareness of global environmental impacts, studies have been conducted on exergetic life cycle assessment for resource accounting. The aim of this paper is to review existing studies on exergetic life cycle assessment to investigate the state-of-the-art and identify the benefits and opportunity for improvement. The methodology used entailed an in-depth literature review, which involved an analysis of journal articles collected through a search of databases such as Web of Science Core Collection, Scopus, and Google Scholar. The selected articles were reviewed and analyzed, and the findings are presented in this paper. The following key conclusions were reached: (a) exergy-based methods provide an improved measure of sustainability, (b) there is an opportunity for a more comprehensi... [more]

National Grid, the UK’s largest utility company, has produced a number of energy transition scenarios, among which “2 degrees” is the most aggressive in terms of decarbonization. This paper presents the results of a combined prospective net energy and environmental life cycle assessment of the UK electricity grid, based on such a scenario. The main findings are that the strategy is effective at drastically reducing greenhouse gas emissions (albeit to a reduced degree with respect to the projected share of “zero carbon” generation taken at face value), but it entails a trade-off in terms of depletion of metal resources. The grid’s potential toxicity impacts are also expected to remain substantially undiminished with respect to the present. Overall, the analysis indicates that the “2 degrees” scenario is environmentally sound and that it even leads to a modest increase in the net energy delivered to society by the grid (after accounting for the energy investments required to deploy all t... [more]

PV waste management will gain relevance proportionally to the amounts of waste that are expected to arise with the phasing-out of old installations in the upcoming years and decades. The Life Cycle Assessment (LCA) methodology is used here to analyze the environmental performance of photovoltaic systems and the waste management methods that have been developed recently. Several LCA studies have already been performed for PV technologies, but in most cases these do not include the end of life stage, thus there is still uncertainty about the impacts of recycling on the environmental footprint of PV electricity. The present study offers a more detailed analysis of different end-of-life approaches for the main photovoltaic technologies that are found on the market. The results from the analysis demonstrate that recycling has the potential to improve the environmental profile of PV electricity but at the same time there is room for further improvements in developing dedicated recycling tech... [more]

This paper provides an investigation into the sustainability of the electrical system in Spain. The analysis covers historic inventories of power generation, installed capacity and technology mix since 1990 and also contemplates four alternative projections for 2030 and 2050. The sustainability is evaluated using eight indicators that provide objective information about the environmental (climate change, fossil depletion, ozone layer depletion, terrestrial acidification, human toxicity and photochemical smog), economic (levelized cost of electricity) and socio-economic (direct employment) performance of the system. The results show an increase in the magnitude of the environmental impacts between 1990 and 2008, due to a growing power demand triggered by economic expansion. After 2008, the environmental performance improves due to the economic recession and the penetration of renewable energies. Overall, the cost of power generation remains rather stable as rising expenses generated by... [more]

Organic Rankine Cycle (ORC) turbogenerators are a well-established technology to recover from medium to ultra-low grade heat and generate electricity, or heat and work as cogenerative units. High firmness, good reliability and acceptable efficiency guarantee to ORCs a large range of applications: from waste heat recovery of industrial processes to the enhancement of heat generated by renewable resources like biomass, solar or geothermal. ORC unit coupled with biomass boiler is one of the most adopted arrangements. However, despite biomass renewability, it is mandatory to evaluate the environmental impact of systems composed by boilers and ORCs taking into account the entire life cycle. To this purpose, the authors perform a life cycle assessment of a commercially available 150 kW cogenerative ORC unit coupled with a biomass boiler to assess the global environmental performance. The system is modelled in SimaPro using different approaches. Results show that the most impacting processes... [more]

Over the past decades, clean and renewable energy has become a subject of great interest to both science and industry in response to the pollution caused by conventional energy sources. Its useful form should always meet the requirements of high performance and low environmental impact, while remaining within the scope of the expected functionality. The purpose of study presented in this paper was to determine the operational characteristics for a recently developed photovoltaic (PV)-powered thermoelectric (TE) cooling system with heat recovery. The characteristics of operation of the tested system were determined within the use of a specially developed measurement system. The conducted experimental research allowed describing the conditions of power supply for TE module using PV system, calculate the coefficient of performance (COP) for the whole TE cooling system with heat recovery and calculate the environmental impact indicators based on the material and energy balance used for lif... [more]

The Life Cycle Assessment (LCA) methodology is often used to check the environmental suitability of hydrogen energy systems, usually involving comparative studies. However, these comparative studies are typically affected by inconsistent methodological choices between the case studies under comparison. In this regard, protocols for the harmonisation of methodological choices in LCA of hydrogen are available. The step-by-step application of these protocols to a large number of case studies has already resulted in libraries of harmonised carbon, energy, and acidification footprints of hydrogen. In order to foster the applicability of these harmonisation protocols, a web-based software for the calculation of harmonised life-cycle indicators of hydrogen has recently been developed. This work addresses—for the first time—the validation of such a tool by checking the deviation between the available libraries of harmonised carbon, energy, and acidification footprints of hydrogen and the corre... [more]

This paper presents a model combining the LCA (Life Cycle Assessment) of fossil fuel extraction with its quality parameters and related CO2, SO2 and dust emissions at the stage of the combustion process. The model which was developed aims to identify the environmental impact of the processes of electricity production from selected energy carriers over their whole life cycle. The model takes into account the full LCA of fossil fuel extraction (of both hard and brown coal), its enrichment and fuel production as well as the environmental impact associated with emissions introduced into the air at the stage of electricity generation based on the fuels evaluated. Such an approach allows one to determine the fuel quality parameters that affect the environmental impact of energy production based on an LCA of mining and assigns the degree of environmental impact involved in particular production processes. Overall, the results obtained based on the proposed model permit the identification and... [more]

During the conversion of solar radiation into electricity, photovoltaic installations do not emit harmful compounds into the environment. However, the stage of production and post-use management of their elements requires large amounts of energy and materials. Therefore, this publication was intended to conduct an eco-energy life cycle analysis of photovoltaic power plant materials and components based on the LCA method. The subject of the study was a 1 MW photovoltaic power plant, located in Poland. Eco-indicator 99, CED and IPCC were used as calculation procedures. Among the analyzed elements of the power plant, the highest level of negative impact on the environment was characterized by the life cycle of photovoltaic panels stored at the landfill after exploitation (the highest demand for energy, materials and CO2 emissions). Among the materials of the power plant distinguished by the highest harmful effect on health and the quality of the environment stands out: silver, nickel, cop... [more]

A greenhouse gas (GHG) emission reduction obligation system has been implemented in the Swedish road transport sector to promote the use of biofuels. For transportation fuel suppliers to fulfil this obligation, the volume of biofuel required decreases with decreasing life cycle GHG emission for the biofuel, linking lower GHG emission to higher economic value. The aim of this study was to investigate how the economic competitiveness of a Swedish emerging lignocellulosic-based ethanol production system would be influenced by the reduction obligation. The life cycle GHG emission for sawdust-based ethanol was calculated by applying the method advocated in the EU Renewable Energy Directive (RED II). The saving in GHG emissions, compared with fossil liquid transportation fuels, was 93% for a potential commercial production system in southern Sweden. This, in turn, will increase the competitiveness of sawdust-based ethanol compared to the mainly crop-based ethanol currently used in the Swedis... [more]

Climate change will require societal-scale infrastructural changes. Balancing priorities for water, energy, and climate will demand that approaches to water and energy management deviate from historical practice. Infrastructure designed to mitigate environmental harm, particularly related to climate change, is likely to become increasingly prevalent. Understanding the implications of such infrastructure for environmental quality is thus of interest. Environmental life cycle assessment (LCA) is a common sustainability assessment tool that aims to quantify the total, multicriteria environmental impact caused by a functional unit. Notably, however, LCA quantifies impacts in the form of environmental “costs” of delivering the functional unit. In the case of mitigation infrastructures, LCA results can be confusing because they are generally reported as the harmful impacts of performing mitigation rather than as net impacts that incorporate benefits of successful mitigation. This paper argue... [more]

Given the environmental footprints of the conventional agriculture, it is imperative to test and validate alternative production systems, with lower environmental impacts to mitigate and adapt our production systems. In this study, we identified six production systems, four in Italy and two in Denmark, to assess the environmental footprint for comparison among the production systems and additionally with conventional production systems. SimaPro 8.4 software was used to carry out the life cycle impact assessment. Among other indicators, three significantly important indicators, namely global warming potential, acidification, and eutrophication, were used as the proxy for life cycle impact assessment. In Italy, the production systems compared were silvopastoral, organic, traditional, and conventional olive production systems, whereas in Denmark, combined food and energy production system was compared with the conventional wheat production system. Among the six production systems, convent... [more]

The role of buildings in the context of addressing the consequences of climate change and the energy deficit is becoming increasingly important due to their share in the overall amount of green house gas (GHG) emissions and rapidly growing domestic energy consumption worldwide. Adherence to a sustainability agenda requires ever-increasing attention to all stages of a building′s life, as such approach allows for the consideration of environmental impacts of a building, from design, through construction stages, until the final phase of a building′s life—demolition. A life cycle assessment (LCA) is one of the most recognized and adopted models for the evaluation of the environmental performance of materials and processes. This paper aims to perform an LCA of four different types of residential buildings in Nur-Sultan, Kazakhstan. The assessment primarily considered embodied energy and GHG emissions as key assessment indicators. Findings suggest that the operational stage contributed to mo... [more]

This paper presents an environmental, economic and energy (3E) assessment of an energy retrofitting of the external walls of a flat of an average building with the most current characteristics used in Portugal. For this intervention, a cork-based (as recycled lightweight aggregate) TIRM (Thermal Insulating Rendering Mortar) was considered. The declared unit was 1 m2 of an external wall for a 50-year study period and the energy and economic costs and savings, as well as the environmental impacts, were analytically modelled and compared for two main alternatives: the reference wall without any intervention and the energetically rehabilitated solution with the application of TIRM. Walls with improved energy performance (with TIRM) show lower economic and environmental impacts: reductions from 6% to 32% in carbon emissions, non-renewable energy consumption and costs during the use stage, which depends on the thickness and relative place where TIRM layers are applied. A worse energy perform... [more]

The aim of this study is to assess how the use of fossil and nuclear power in different renovation scenarios affects the environmental impacts of a multi-family dwelling in Sweden, and how changes in the electricity production with different energy carriers affect the environmental impact. In line with the Paris Agreement, the European Union has set an agenda to reduce greenhouse gas emissions by means of energy efficiency in buildings. It is estimated that by the year 2050, 80% of Europe’s population will be living in buildings that already exist. This means it is important for the European Union to renovate buildings to improve energy efficiency. In this study, eight renovation scenarios, using six different Northern European electricity mixes, were analyzed using the standard of the European Committee for Standardization for life cycle assessment of buildings. This study covers all life cycle steps from cradle to grave. The renovation scenarios include combinations of photovoltaics,... [more]

Recent research has investigated the energy saving potential of regenerative suspension. However, the greenhouse gas (GHG) emission mitigation potential of regenerative suspension in battery electric vehicles (BEVs) has not been considered. Life cycle assessment (LCA) is a typical method for evaluating GHG emissions but is rarely used in vehicle control design. Here we explore the effects of regenerative suspension on reducing the GHG emissions from a BEV, whose control design considers well-to-wheels (WTW) analysis. The work first conducts the WTW analysis and modelling of the GHG emissions from a BEV equipped with regenerative suspension. Based on the models, the relation between suspension control parameters and GHG emissions is obtained. To reach a compromise between dynamic performance and environmental benefit, two types of control parameters are recommended and their switch rules during the operation are proposed. Finally, we take a case study with different driving cycles, road... [more]

In Europe, ethanol is blended with gasoline fuel in 5 or 10% volume (E5 or E10). In USA the blend is 15% in volume (E15) and there are also pumps that provide E85. In Brazil, the conventional gasoline is E27 and there are pumps that offer E100, due to the growing market of flex fuel vehicles. Bioethanol production is usually by means of biological conversion of several biomass feedstocks (first generation sugar cane in Brazil, corn in the USA, sugar beet in Europe, or second-generation bagasse of sugarcane or lignocellulosic materials from crop wastes). The environmental sustainability of the bioethanol is usually measured by the global warming potential metric (GWP in CO2eq), 100 years time horizon. Reviewed values could range from 0.31 to 5.55 gCO2eq/LETOH. A biomass-to-ethanol industrial scenario was used to evaluate the impact of methodological choices on CO2eq: conventional versus dynamic Life Cycle Assessment; different impact assessment methods (TRACI, IPCC, ILCD, IMPACT, EDIP,... [more]

The aim of this study is to assess how different renovation scenarios affect the environmental and economic impacts of a multi-dwelling building in a Nordic climate, how these aspects are correlated and how different energy carriers affect different environmental impact categories. In order to reduce greenhouse gas emissions, the European Union has set an agenda in order to reduce energy use in buildings. New buildings on the European market have a low replacement rate, which makes building renovation an important factor for achieving the European Union goals. In this study, eight renovation strategies were analyzed following the European Committee for Standardization standards for life cycle assessment and life cycle costs of buildings. This study covers all life cycle steps from cradle to grave. The renovation scenarios include combinations of photovoltaics, geothermal heat pumps, heat recovery ventilation and improved building envelopes. Results show that, depending on the energy ca... [more]

The development of Li-ion batteries has enabled the re-entry of electric vehicles into the market. As car manufacturers strive to reach higher practical specific energies (550 Wh/kg) than what is achievable for Li-ion batteries, new alternatives for battery chemistry are being considered. Li-Sulfur batteries are of interest due to their ability to achieve the desired practical specific energy. The research presented in this paper focuses on the development of the Li-Sulfur technology for use in electric vehicles. The paper presents the methodology and results for endurance tests conducted on in-house manufactured Li-S cells under various accelerated ageing conditions. The Li-S cells were found to reach 80% state of health after 300−500 cycles. The results of these tests were used as the basis for discussing the second life options for Li-S batteries, as well as environmental Life Cycle Assessment results of a 50 kWh Li-S battery.