Greenhouse gas (GHG) emissions related to the Farnsworth Unit’s (FWU) carbon dioxide enhanced oil recovery (CO2-EOR) operations were accounted for through a gate-to-gate life cycle assessment (LCA) for a period of about 10 years, since start of injection to 2020, and predictions of 18 additional years of the CO2-EOR operation were made. The CO2 source for the FWU project has been 100% anthropogenically derived from the exhaust of an ethanol plant and a fertilizer plant. A cumulative amount of 5.25 × 106 tonnes of oil has been recovered through the injection of 1.64 × 106 tonnes of purchased CO2, of which 92% was stored during the 10-year period. An LCA analysis conducted on the various unit emissions of the FWU process yielded a net negative (positive storage) of 1.31 × 106 tonnes of CO2 equivalent, representing 79% of purchased CO2. An optimized 18-year forecasted analysis estimated 86% storage of the forecasted 3.21 × 106 tonnes of purchased CO2 with an equivalent 2.90 × 106 tonnes o... [more]

This research emphasizes the analysis and assessment of the environmental impact in the construction sector. It aims to propose a model for analyzing the management of environmental resources in the building process. This specific sector presents a significant potential risk of negatively affecting the environment, through pollution, energy consumption, and waste generation. Environmental responsibility involves analyzing the environmental impact and implementing effective solutions for an adequate governance of the environmental resources. Various life cycle assessment methods are employed to design a new model of management of environmental resources, starting from the factors impacting the environment. The resulting model takes these factors into account and carries several advantages from an organizational point of view. One novel result is that the model can be applied at a microeconomic level as well as at a macroeconomic level. By implementing this model, the preconditions for r... [more]

The Digital Product Passport (DPP) is a concept of a policy instrument particularly pushed by policy circles to contribute to a circular economy. The preliminary design of the DPP is supposed to have product-related information compiled mainly by manufactures and, thus, to provide the basis for more circular products. Given the lack of scientific debate on the DPP, this study seeks to work out design options of the DPP and how these options might benefit stakeholders in a product’s value chain. In so doing, we introduce the concept of the DPP and, then, describe the existing regime of regulated and voluntary product information tools focusing on the role of stakeholders. These initial results are reflected in an actor-centered analysis on potential advantages gained through the DPP. Data is generated through desk research and a stakeholder workshop. In particular, by having explored the role the DPP for different actors, we find substantial demand for further research on a variety of i... [more]

This study proposes a multi-objective approach for the optimal design of a sustainable Integrated Biodiesel/Diesel Supply Chain (IBDSC) based on first- (sunflower and rapeseed) and second-generation (waste cooking oil and animal fat) feedstocks with solid waste use. It includes mixed-integer linear programming (MILP) models of the economic, environmental and social impact of IBDSC, and respective criteria defined in terms of costs. The purpose is to obtain the optimal number, sizes and locations of bio-refineries and solid waste plants; the areas and amounts of feedstocks needed for biodiesel production; and the transportation mode. The approach is applied on a real case study in which the territory of Bulgaria with its 27 districts is considered. Optimization problems are formulated for a 5-year period using either environmental or economic criteria and the remainder are defined as constraints. The obtained results show that in the case of the economic criterion, 14% of the agricultur... [more]

High initial costs hinder innovative technologies for building envelopes. Life Cycle Assessment (LCA) should consider energy savings to show relevant economic benefits and potential to reduce energy consumption and CO2 emissions. Life Cycle Cost (LCC) and Life Cycle Energy (LCE) should focus on investment, operation, maintenance, dismantling, disposal, and/or recycling for the building. This study compares the LCC and LCE analysis of Water Flow Glazing (WFG) envelopes with traditional double and triple glazing facades. The assessment considers initial, operational, and disposal costs and energy consumption as well as different energy systems for heating and cooling. Real prototypes have been built in two different locations to record real-world data of yearly operational energy. WFG systems consistently showed a higher initial investment than traditional glazing. The final Life Cycle Cost analysis demonstrates that WFG systems are better over the operation phase only when it is compare... [more]

The introduction of stationary storage systems into the Italian electric network is necessary to accommodate the increasing share of energy from non-programmable renewable sources and to reach progressive decarbonization targets. In this framework, a life cycle assessment is a suitable tool to assess environmental impacts during the entire life cycle of stationary storage systems, i.e., their sustainability. A Li-ion battery (lithium−iron−phosphate (LFP), nickel−manganese−cobalt (NMC) 532, and NMC 622) entire life cycle assessment (LCA) based on primary and literature data was performed. The LCA results showed that energy consumption (predominantly during cell production), battery design (particularly binder choice), inventory accuracy, and data quality are key aspects that can strongly affect results. Regarding the battery construction phase, LFP batteries showed better performance than the NMC ones, but when the end-of-life (EoL) stage was included, NMC cell performance became very c... [more]

This paper aims to review one of the least used, but no less important, approaches in the assessment of the environmental implications of electricity generation: the Economic Input-Output Life Cycle Assessment (EIO-LCA). This methodology is a top-down approach intertwined with the environmental satellite accounts provided by the national statistical office. Through the use of economic input-output (IO) tables and industrial sector-level environmental and energy data, the EIO-LCA analysis allows for broad impact coverage of all sectors directly and indirectly involved with electricity generation. In this study, a brief overview of this methodology and the corresponding assumptions is presented, as well as an updated review of the different applications of the EIO-LCA approach in electricity generation, suggesting a possible classification of the many studies developed in this context. The different ways of overcoming the problem of disaggregation in the electricity sector are also addre... [more]

Owing to residual biomass availability, the share of advanced biofuels produced from secondary biomass is forecasted to increase and significantly contribute towards achieving net-zero emissions. The current work investigates bio-methanol production through a new process configuration designed to improve the environmental performance when compared to the state-of-the art technologies (Base Case). The environmental evaluation is conducted according to the Life Cycle Assessment (LCA) methodology. ReCiPe was employed as an impact assessment method with the aid of GaBi software. Depending on the plant geographical location, wooden biomass and exhausted olive pomace were evaluated as biomass sources. A scenario analysis targeting different energy sources was performed as well. The outcome of the environmental evaluation highlights a better performance in eight of a total of nine impact categories studied in the wooden biomass scenarios compared to the exhausted olive pomace. Moreover, two o... [more]

An energy production system that combines biomass and fuel cells produces much energy with minimal environmental impact. However, the hydrogen sulfide (H2S) contained in gasified biomass degrades fuel cell performance, thus negating the advantages of this combination. In this study, the removal of H2S by adsorption after biomass gasification was investigated. Metal oxides with high adsorption performance are common H2S adsorbents. However, they have a significant environmental impact in terms of metal depletion, which is an environmental impact indicator. Therefore, neutralized sediment materials from mine drainage treatments can be used as H2S adsorbents. A previous study found that the adsorption performance of H2S adsorbents is equivalent to that of metal oxides, especially in the high-temperature zone (300 °C), and the environmental impact is considerably lower than that of metal oxides. However, because the neutralized sediment is a powder (Φ 4.5 μm on average), there is a possibi... [more]

This paper aims to present the real improvement opportunities of a simple organic Rankine cycle (ORC) as waste heat recovery system (WHRS) from the exhaust gases of a natural gas engine using toluene as the working fluid, based on the exergy and environmental point of view. From the energy and exergy balances, the advanced exergetic analysis was developed to determine the irreversibilities and opportunities for improvement. Since the traditional exergo-environmental analysis, it was found that the component with the greatest potential environmental impact associated with exergy (bF = 0.067 mPts/MJ) and per unit of exergy (ḂD = 8.729 mPts/h) was the condenser, while the exergy-environmental fraction was presented in the turbine (52.51%) and pump-2 (21.12%). The advanced exergo-environmental analysis showed that the environmental impact is more associated with the operational behavior of the components, with 75.33% of the environmental impacts being of endogenous nature, showing that the... [more]

The European Union is moving towards a sustainable, decarbonized, and circular economy. It has identified seven key value chains in which to intervene, with the battery and vehicle value chain being one of them. Thus, actions and strategies for the sustainability of batteries need to be developed. Since Life Cycle Assessment (LCA) is a strategic tool for evaluating environmental sustainability, this paper investigates its application to two configurations of a sodium−nickel chloride cell (planar and tubular), focusing on the active material and the anode, with the purpose of identifying the configuration characterized by the lowest environmental impacts. The results, based on a “from cradle to gate” approach, showed that the tubular cell performs better for all environmental impact categories measured except for particulate matter, acidification, and resource depletion. With nickel being the main contributor to these impact categories, future sustainable strategies need to be oriented... [more]

This paper assesses the potential environmental effects of the optimization of the kitchen waste management in Opole. The separate collection of kitchen waste is improved by distribution of separate collection kits consisting of an in-home bin and 10 L biodegradable bags. The surplus of collected kitchen waste is diverted from treatment in a mechanical-biological pretreatment (MBP) along with the residual waste to anaerobic digestion (AD) with the biowaste. This has positive effects on European and Polish goals, ambitions, and targets, such as (i) increasing the level of renewables in the primary energy supply, (ii) decreasing the level of greenhouse gas (GHG) emissions, (iii) increasing the level of preparation for reuse and recycling of municipal waste. The environmental effects of 1 ton additionally separately collected and treated kitchen waste are determined by using life cycle assessment. It was shown that in all selected impact categories (global warming potential, marine eutrop... [more]

The transformation of the European electricity system could generate unintended environment-related trade-offs, e.g., between greenhouse gas emissions and metal depletion. The question thus emerges, how to shape policy packages considering climate change, but without neglecting other environmental and resource-related impacts. In this context, this study analyzes the impacts of different settings of potential policy targets using a multi-criteria analysis in the frame of a coupled energy system and life cycle assessment model. The focus is on the interrelationship between climate change and metal depletion in the future European decarbonized electricity system in 2050, also taking into account total system expenditures of transforming the energy system. The study shows, firstly, that highly ambitious climate policy targets will not allow for any specific resource policy targets. Secondly, smoothing the trade-off is only possible to the extent of one of the policy targets, whereas, thir... [more]

This paper provides values of economic, energy and environmental assessments of 20 crops and assesses the relationships of soil-climatic conditions in the example of the Czech Republic. The comparison of main soil quality indicators according to the configuration of land and climate regions is performed on the basis of energy and economic efficiency as well as a comparison of the level of environmental impacts. The environmental impacts are identified based on the assessment of emissions from production and also in the form of soil compaction as an indicator of the relationship to soil quality. As concerns soil properties, of major importance is soil skeleton, slope of land and the depth of soil, which cause an increase in emissions from the energy produced. Substantially better emission parameters per 1 MJ through energy crops, the cultivation of perennial crops and silage maize has been supported. Among energy crops, a positive relationship with the quality of soil is seen in alfalfa... [more]

We integrate life cycle indicators for various technologies of an energy system model with high spatiotemporal detail and a focus on Europe and North Africa. Using multi-objective optimization, we calculate a pareto front that allows us to assess the trade-offs between system costs and life cycle greenhouse gas (GHG) emissions of future power systems. Furthermore, we perform environmental ex-post assessments of selected solutions using a broad set of life cycle impact categories. In a system with the least life cycle GHG emissions, the costs would increase by ~63%, thereby reducing life cycle GHG emissions by ~82% compared to the cost-optimal solution. Power systems mitigating a substantial part of life cycle GHG emissions with small increases in system costs show a trend towards a deployment of wind onshore, electricity grid and a decline in photovoltaic plants and Li-ion storage. Further reductions are achieved by the deployment of concentrated solar power, wind offshore and nuclear... [more]

Among the super insulating materials, aerogel has interesting properties: very low thermal conductivity and density, resistance to high temperatures and transparency. It is a rather expensive material, but incentives in the field can improve its economic attractiveness. Starting from this, the thermal behavior of a test building entirely insulated with aerogel panels was investigated through an extended experimental campaign. A dynamic simulation model of a case study building was generated to better comprehend the energy savings obtained through aerogel in terms of energy demand over a whole year. The investigation was completed by computing the carbon and energy payback times of various retrofit strategies through a life cycle assessment approach, as well as by a cost-benefit analysis through a probabilistic financial framework. Compared to conventional insulation materials, aerogel is characterized by a higher energy and carbon payback time, but it guarantees better environmental pe... [more]

Industrial symbiosis networks conventionally provide economic and environmental benefits to participating industries. However, most studies have failed to quantify waste management solutions and identify network connections in addition to methodological variation of assessments. This study provides a comprehensive model to conduct sustainable study of industrial symbiosis, which includes identification of network connections, life cycle assessment of materials, economic assessment, and environmental performance using standard guidelines from the literature. Additionally, a case study of industrial symbiosis network from Sodankylä region of Finland is implemented. Results projected an estimated life cycle cost of €115.20 million. The symbiotic environment would save €6.42 million in waste management cost to the business participants in addition to the projected environmental impact of 0.95 million tonne of CO2, 339.80 tonne of CH4, and 18.20 tonne of N2O. The potential of further cost s... [more]

The global demand for air conditioners (ACs) has more than tripled since 1990, with 1.6 billion units currently in use. With the rapid economic and population growth of countries located in the hottest parts in the world, this trend is likely to continue in the future. The aim of this study was to show the benefits of introducing air conditioners with different materials or different technologies such as inverters with high energy-saving performance on the environment and human health in Indonesia. To evaluate the environmental impacts of the different technologies, a cradle-to-grave life cycle assessment (LCA) of air conditioners was conducted using the life-cycle impact assessment method based on endpoint modeling (LIME3). As expected, the use stage has the largest global warming potential (GWP), representing more than 90% of the impact, whereas copper and nickel have the most important impact in terms of resource consumption (about 50%). We found that the impacts are heavily depende... [more]

The efficient and timely removal of organic matter and nutrients from water used in normal municipal functions is considered to be the main task of wastewater treatment plants (WWTPs). Therefore, these facilities are considered to be essential units that are required to avoid pollution of the water environment and decrease the possibility of triggering eutrophication. Even though these benefits are undeniable, they remain at odds with the high energy demand of wastewater treatment and sludge processes. As a consequence, WWTPs have various environmental impacts, which can be estimated and categorized using Life Cycle Assessment (LCA) analysis. In this study, a municipal WWTP based in Poznań, Poland, was examined using the method defined in ISO 14040. ReCiPe Endpoint and Midpoint (v1.11), in a hierarchical approach, were used to evaluate the environmental impacts regarding 18 different categories. All calculations were conducted using a detailed database from 2019, which describes each c... [more]

The article proposes methods for determining the optimal thermal insulation thickness for economic and ecological reasons, depending on the number of degree days of the heating period. Life cycle assessment was used for the ecological analysis. Analyses were performed for selected variants typical of Polish conditions. The optimal thermal insulation thickness as well as the amount of economic and ecological benefits depends very much on the condition of the building without thermal insulation, but also on the heat source used and the thermal insulation material to be used. For each variant, the optimal thermal insulation thickness for ecological reasons is much greater than the optimal for economic reasons. Taking into consideration the climatic zone and the associated number of degree days of the heating period, the colder the zone, the greater the optimal insulation thickness, as well as economic and ecological benefits.

The production of wood pellets has grown considerably in the last decades. Besides woody biomass, other feedstocks can be used for pellet production. Among these, miscanthus presents some advantages because, even if specifically cultivated, it requires low inputs such as fertilisers and pesticides and shows high biomass yield (up to 28 tons of dry matter ha−1 in Europe). Even if in the last years some studies evaluated the environmental impact of woody pellet production, there is no information about the environmental performances of miscanthus pellet production. In this study, the environmental impact of miscanthus pellet was evaluated using the Life Cycle Assessment approach with a cradle-to plant gate perspective. Primary data were collected in a small-medium size pelletizing plant located in Northern Italy where miscanthus is cultivated to be directly processed. The results highlight how the miscanthus pellet shows lower environmental impact compared to woody pellet, mainly due to... [more]

In this paper, a comprehensive life-cycle assessment (LCA) is carried out in order to evaluate the multiple environmental-health impacts of the biological wastewater treatment of the fish-processing industry throughout its life cycle. To this aim, the life-cycle impact assessment method based on endpoint modeling (LIME) was considered as the main LCA model. The proposed methodology is based on an endpoint modeling framework that uses the conjoint analysis to calculate damage factors for human health, social assets, biodiversity, and primary production, based on Indonesia’s local data inventory. A quantitative microbial risk assessment (QMRA) is integrated with the LIME modeling framework to evaluate the damage on human health caused by five major biological treatment technologies, including chemical-enhanced primary clarification (CEPC), aerobic-activated sludge (AS), up-flow anaerobic sludge blanket (UASB), ultrafiltration (UF) and reverse osmosis (RO) in this industry. Finally, a lif... [more]

We investigate the environmental impacts of on-board (based on alternating current, AC) and off-board (based on direct current, DC) charging concepts for electric vehicles using Life Cycle Assessment and considering a maximum charging power of 22 kW (AC) and 50 kW (DC). Our results show that the manufacturing of chargers provokes the highest contribution to environmental impacts of the production phase. Within the chargers, the filters could be identified as main polluters for all power levels. When comparing the results on a system level, the DC system causes less environmental impact than the AC system in all impact categories. In our diffusion scenarios for electric vehicles, annual emission reductions of up to 35 million kg CO2-eq. could be achieved when the DC system is used instead of the AC system. In addition to the environmental assessment, we examine economic effects. Here, we find annual savings of up to 8.5 million euros, when the DC system is used instead of the AC system.

The global climate crisis has led society toward cleaner energy sources. Another reason is the limited reserves of fossil energy resources. Efforts to increase the efficiency of photovoltaic modules (PVs) have gained momentum. The high temperature is the biggest factor causing a decrease in the efficiency of PVs. In this study, a commercial PV was cooled with distilled water, a multiwalled carbon nanotubes (MWCNT)/water mixture, and a graphene nanoplatelets (GNP)/water mixture. The environmental impact of electricity, total energetic efficiency, energy payback time, energy return on investment, and embodied energy of the PV/thermal (PV/T) system were compared using life cycle assessment and cumulative energy demand. The electrical efficiency of the PV/T changed between 13.5% and 14.4%. The total efficiency of PV/T changed between 39.5% and 45.7%. The energy returns on investment were 1.76, 1.80, and 1.85 for PV/T-distilled water, the PV/T-MWCNT/water mixture, and the PV/T-GNP/water mix... [more]

This paper analyzes a moving grate biomass boiler operating with three alternative waste fuels, including biomass pellets, wood waste, and refuse-derived fuel (RDF) from a combination of thermal, economic, and environmental perspectives. The focus of this paper is on system functionality adaptation to retrofit the current systems operational conditions. A one-dimensional numerical bed model integrated with a black-box overbed model was developed to carefully investigate the fuel bed’s thermal characteristics, as well as the boiler’s output. According to the results, the system operates more efficiently under the biomass pellets feeding and annually generates 548 GJ heat, while it drops significantly in other scenarios. The system was economically evaluated based on a 25-year life cycle cost analysis. Subsequently, an internal rate of return (IRR) of 36% was calculated for biomass pellets, while the value reduced by 50% and 27% regarding wood waste and RDF, respectively. The fuel cost w... [more]